Tab Strip Selection Screen in ALV Report

Hi All,
I want to create a ALV report with TABStrip selection screen. How to proceede.
Is there any necessary to create dailog program for the screens.
Please advise.
Thank You,
ANu.

Hi
You can create it using module pool program in an easy way. Have the tab strip in main screen and use the sub-screens for display. By this way you can do it. If you wish, you could refer the following link, where they have given step by step procedure.
<<Link-farm removed>>
Hope this helps you.
Regards
Vinodh
Edited by: kishan P on Nov 1, 2010 3:00 PM

Similar Messages

Variants on tabbed selection screen for ALV reports

Scenario: We use a tabbed selection screen for an ALV report. We create a variant, make a selection field on the second tab mandatory & save it without a value. When we run the report with the saved variant it does not check that the required field on the second tab is populated before it executes.
Question: How can I code such a check?
Edited by: Alridge Tom on Jul 4, 2008 3:43 PM

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

Show the drop down list of variant on the selection screen in ALV reports

Hi,
i have a alv report when i execute this display will come and then i click display layout it save as a variant on the selection screen and when i go back to selection screen and press f4 on the display variant its show the drop down list of varient.
can u send me some code for this functionality...its very urgent.
thanks!
Vipin

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

How to create Multiple Selection Screen in ALV

Hi,
Can anybody tell me how to create the Multiple Selection screen in ALV reports.
Plse give me code sample if possible.
Thanks in advance
KP

Hi Rich,
thanks for the reply.
I am creating a report. in that for one field, i need to create a multiple selection screen. i mean in the output screen , i need to get the multiple selection screen for that field. in that i should be able to select multiple values, or single values or range of values.
eg: if i take the field kunnr, i should be able to select the multiple kunnar values in the output screen.
Hope my problem is understood.
Thanks
KP

Symbol as default in a selection screen in alv

hi all,
how to bring GE(>=) symbol as default in a selection screen in alv report.
by
Ramesh.

Hai Ramesh,
Create Pushbuttons in selection screen ,In pushbutton write the ' >=' instead of providing the text.
Try like this may be u will find the answer,
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
    BEGIN OF LINE,
      PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
      PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
    END OF LINE,
    BEGIN OF LINE,
      PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
      PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
    END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
    WHEN 'CLI1'.
      FLAG = '1'.
    WHEN 'CLI2'.
      FLAG = '2'.
    WHEN 'CLI3'.
      FLAG = '3'.
    WHEN 'CLI4'.
      FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
    WHEN '1'.
      WRITE / 'Button 1 was clicked'.
    WHEN '2'.
      WRITE / 'Button 2 was clicked'.
    WHEN '3'.
      WRITE / 'Button 3 was clicked'.
    WHEN '4'.
      WRITE / 'Button 4 was clicked'.
    WHEN OTHERS.
      WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a dialog box. The selection screen is defined in a statement chain for keyword SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4', the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
CLI1, CLI2, CLI3 and CLI4 are used for <ucom>. When the user clicks one of the pushbuttons, the AT SELECTION-SCREEN event is triggered, and the FLAG field is set. The FLAG field can be further processed during subsequent program flow after the user has chosen Execute.
Refer the above code, and make change just to clear all the fields in the selection screen, when corresponding push button is clicked..
May be this answer is helpful to u.
Regards,
Skumari

Tab in selection screen

Dear All,
I have to developed a new report in which I have to diplay two different report.For that two different report there are two different selection screen.I have developed two tabs in selection screen for two different report.
There are some mandatory fields in each screen,Now problem is that I can't go second tab unless I fill value in mandatory field.
But my requirment is when I want to go for second report then I will go for second tab without filling any value in tab 1 selection screen
Please give a sollution.
Regards,
Amar

Hi Amar,
<li>You can achieve the same using Dialog program . Instead of selection-screen, use dialog programming, use MODULE mod_name AT EXIT-COMMAND to navigate one tab to another tab. Once you give input on any tab and want to display data use LEAVE TO LIST PROCESSING AND RETURN TO SCREEN 0.
<li>Check the link: http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbaa9535c111d1829f0000e829fbfe/content.htm
<li>Normally AT EXIT-COMMAND is used to exit without giving mandatory fields. We can use for this situation.
Thanks
Venkat.O

Can we call screen from ALV report

Hi All,
I am in the process of creating a stand alone application. However I have stuck up here.
Problem: Can we call any screen from ALV report? If yes then how??? Can anyone give some code snippet??
All your help appreciated.
Thanks,
Jignesh

Hello Jignesh,
Here is an example, when you double click on a line, it pops with with another screen that holds details for the flight information.
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
    METHODS:
    handle_double_click FOR EVENT double_click
                        OF cl_gui_alv_grid
                        IMPORTING e_row
                                  e_column.
   ENDCLASS.                    "lcl_event_handler
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
    READ TABLE it_flight INTO wa_flight INDEX e_row-index.
    IF sy-subrc EQ 0.
      SELECT * FROM sbook
               INTO TABLE it_book
               WHERE carrid EQ wa_flight-carrid AND
                     connid EQ wa_flight-connid.
      CALL SCREEN 101 STARTING AT 10 10.
    ENDIF.
ENDMETHOD.                 "HANDLE_DOUBLE_CLICK
ENDCLASS.                    "LCL_EVENT_HANDLER
MODULE status_0101 OUTPUT.
Variant to save the layout
gv_repid = sy-repid.
IF g_custom_container2 IS INITIAL.
Create an instance for Custom Container 'ALV_GRID'
    CREATE OBJECT g_custom_container2
           EXPORTING container_name = gs_container2.
Create an instance for ALV Grid
    CREATE OBJECT g_grid2
           EXPORTING i_parent = g_custom_container2.
Variant to save the layout
    gs_layout-grid_title = 'Flight Bookings'.
    CALL METHOD g_grid2->set_table_for_first_display
      EXPORTING
        i_structure_name = 'SBOOK'
        is_layout        = gs_layout
      CHANGING
        it_outtab        = it_book[].
ELSE.
    CALL METHOD g_grid2->refresh_table_display.
ENDIF.                               "IF grid2 IS INITIAL.
Setting focus for created grid control
CALL METHOD cl_gui_control=>set_focus
    EXPORTING
      control = g_grid2.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE.                 " status_0101 OUTPUT
Refer to BC_ALV_GRID04 for ALV data declarations used in the above piece of code.

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

Difficulty in adding new parameter in selection screen of GR55 report

Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
Meenakshi

Hi meenakshi239,
you can always use implicit enhancement spots.
Regards,
Clemens

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Selection screen in ALV output

Hi Experts,
My requirement is - A selection screen should pop up on the click of a button in the ALV output. Using the parameters I input on the selection screen anothor ALV should be displayed on the same page at the bottom. I'm displaying ALV using cl_gui_alv_grid.
Thanks.
Ajith

Hi Nimesh,
The requirement has slightly been updated so as to display the 2nd ALV is another screen.
As you suggested I used the call selection screen. How ever I did not use events for the same. I called the selection screen on checking sy-ucomm in PAI.
After I input the values in the pop up selection screen , even if I click the cancel button(at bottom) or the close button( top corner) the execution still follows and the second ALV is displayed.
Please help me in this so that If I click on cancel or close the second ALV is not displayed and the control remains in the first ALV
Thank you.
Edited by: Ajith Krishna on Oct 31, 2008 10:24 PM

Selection Screen for crystal report ?

Hi to all,
Is it possible to create selection screen using Crystal report designer alone ?
I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
Can we create selection screen for user input like we have in abab (selection screen) ?.
Is it possible to check authorization using Crystal report designer ?
If anyone knows anything .... remotely connected with the question I asked please reply.
Waiting for reply.
Regards,
Surya.

Surya,
To do what you are wanting, you will want to do the following:
1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
2) Add the parameter to the Select Expert.
2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
Something like this:
WHERE f.FieldName = {?ParameterName}
HTH,
Jason

Getting two selection screen in one report

Hello Friends,
I am Making report, In my report on first screen i have given two pushbutton, like this :
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS : p1_but RADIOBUTTON GROUP g1,
p2_but RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
now i want when user click on any one pushbutton it shows another selection screen, whose select options are:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: so_erdat FOR lf_date,
so_vbeln FOR lf_vbeln MATCHCODE OBJECT zvbeln..
SELECTION-SCREEN END OF BLOCK b1.
Please guide me can i use two selection screen in one report?, If yes then how can I use? Please revert back me as soon as possible.........

Hi,
you can achieve it only by using two USER_DEFINE_SELECTION SCREEN.
For detail check the link
http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dba83d35c111d1829f0000e829fbfe/content.htm
Regards,
anirban

How to force selection screen in WAD Report

Hi Gurus,
How do we force a variable selection screen in WAD Report. We are in SP 10.
Thanks
Syed

Hi Karthik,
Iam not sure for some reason, when I select web_template and click on Web Parameters, there nothing available below Behaviour section. However when I create a new Analysis Item and see its properties, the Behaviour section shows only Allow Navigation & Only Hierarchy options.
Should I reinstall my front end. We are in SP10.
Appreciate your response.

Tab Strip Selection Screen in ALV Report

Similar Messages

Maybe you are looking for