Tabel and row split

I've got an rtf template with one table with one column/row and inside this table
a second table with 4 rows. The outside table has the option to split the row at a new page unchecked. When generating a pdf this works as expected: De xml has several group rows, generating one table per group row inside the table with one column/row. However when generating an rtf from the rtf template this doesnt work at all.
Viewing the rtf template source code I can find \trkeep, but in the source
code of the actual generated rtf output file \trkeep is missing.
(Windows XP
Office 2000
BIP 10.1.3.3.1
Is this a bug and if so is the a workaround??

Similar Messages

Read words from text file by delimiter as columns and rows

Hi All,
I need your help as i have a problem with reading string by delimiter. i have used various tech in java, but i can not get the result as expected.
Please help me to get the string from text file and write into excel . i have used a text file.
problem
get the below as string by delimiter
OI.ID||'|'||OI.IDSIEBEL||'|'||OI.IDTGU||'|'||OI.WORKTYPE||'|'||OI.UTR_FK
read the below as string by delimiter
"50381|TEST_7.15.2.2|09913043548|Attivazione|07-SEP-10
now i need to write the above into excel file as columns and rows.
there are 5 columns and each corresponding values
the outut excel should be
OI.ID OI.IDSIEBEL OI.IDSIEBEL OI.WORKTYPE OI.UTR_FK
50381 TEST_7.15.2.2 09913043548 Attivazione 07-SEP-10
i tried in diffrerent techinq but not able to get the resule. pls help me
Thanks,
Jasmin
Edited by: user13836688 on Jan 22, 2011 8:13 PM

First of all, when posting code, put it between two tags.
Second of all, the pipe is a special character in regex, so you need to escape it as
.split("\ \|");
Erh. So 2 backslashes before the pipe character. Stupid forum won't post it.
Edited by: Kayaman on Jan 24, 2011 9:35 AM
Edited by: Kayaman on Jan 24, 2011 9:35 AM
Edited by: Kayaman on Jan 24, 2011 9:36 AM

Table row split

Table row split sccripting.
5 paragraphs in one row in table. i need 5 paragraphs in 5rows. please help some one.
e.g. is below:
Header 1
Header 2
1
2
3
4
5
change,
Header 1
Header 2
1
2
3
4
5
Thanks,
Senthil

The basic technique I'd use would be to add rows after the row of interest and then move the last paragraph to the corresponding cell on the next row (that you just added) until there's only one paragraph left in the cell.
I'm a JavaScripter, so I'm not sure if the code I'd post would help. Is this something you want to do just once? Or are you faced with a lot of tables in this state that need this process applied to them?
Dave

Interactive Report Column Headings and Row Height

I am using the div style="width:350px;" method to control the width of columns in various interactive reports. That works fine except for the following:
1. When creating filters, the <div...> stuff shows up along with the actual column heading, thus confusing some end users
2. Even when I uncheck the "Use same text for single row view" checkbox and then provide a simple single row view label, the <div> stuff still shows up on the single row view
Does anyone have a better solution?
Also, does anyone know of a way to limit the row height within an interactive report row? I have some columns of data that contain a large amount of HTML data and I'd like to be able to limit the number of rows that show on the report.
Is Oracle planning to provide some better control over the Interactive Report columns in another version? The Interactive Report is such a huge improvement in usability in APEX - it would be great to take it to another level by providing some better control over column width and row height.
Edited by: DaleB on Jun 18, 2009 8:54 AM
Edited by: DaleB on Jun 18, 2009 8:54 AM

Dale,
Unfortunately we don't have much we can use to do what you would like. I would have said it's impossible until version 4 but you could actually do something similar to what Roel has done. His trick is in the edit button. He changed the edit button to use an "onload" call to a JavaScript process. You could do the same but call a process that goes across the rows and styles each column. Now because you don't have a way to identify the column (can't use the order because the end user could change it) you'll have to write the code to look at the top row first and then style the appropriate column. As far as I can tell, this would be quite difficult and inefficient. Having said that if you need it that bad and would like some help with it, put up an example application on apex.oracle.com and provide the workspace/username/password and I'll take a look.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
You can reward this reply by marking it as either Helpful or Correct ;-)

My wife and I split up and I was given the iPad but she is still know what I am doing on it. Supposedly when I got the iPad there was a program that we set up so we could know what is happening on the iPad how do we stop that? She can still see my text

My wife and I split up and I got the iPad. But she still knows what I am doing on it. Even though I changed my apple i.d password and everything. She knows who I am talking to what I am doing on fb, my iMessage, emails, how do I get my privacy back without losing all my apps, book and movies I paid for?

Sorry, but you are describing many different problems all in one go. Have you changed your FaceBook account and the passwords for all your email accounts ?
You say you have changed all the passwords for all the accounts you use, including your Apple/iTunes account if you have one. If this hasn't done the trick I suggest you restore your iPad to factory conditions, set it up again from scratch, and download the things you've paid for again. You will not need to pay for things bought through your iTunes account again.

How to enter a data into the specified column and row in a created table

Hi,
I want to enter some data to specified column and row in a already created table. Please let me know how to do this.
Regards
Shivakumar Singh

A table is just a 2D array of strings. Keep it in a shift register and use "replace array element" to modify the desired entry programmatically.
If you want to modify it manually and directly from the front panel, make it into a control and type directly into the desired element. (In this case your program would need to write to it using a local variable).
Atttached is a simple example in LabVIEW 7.0 that shows both possibilities.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ChangeTableEntries.vi ‏41 KB

How To UPLOAD a DATA (.DAT) fiel from PC to internal table and then split it into the data different columns

Hi all,
I am new to ABAP Development. I need to upload a .DAT file (the file doesn#t have any proper structure-- Please find the .DAT file in the attachment). After uploading the DATA (.DAT) fiel I need to split in into different columns. Refering the attached .DAT fiel the fields in bracets like:
[Arbeitstag], [Pecunia], [Mita], [Kunde], [Auftrag] and [Position] are different fields that need to be arranged in columns in an internal table. this .DAT fiel which I want to upload and then SPLIT it into various fields will will treated as MASTER DATA table for further programming. The program that I had written is as below. Also please refer the attached .DAT table.
Please if any one could help me. i searched a lot in different forums but couldn't find me a solution. Also note that the attached fiel is in text (.txt) format here but in real situation the same fiel is in DATA (.DAT) format.
*& Report ZDEMO_ZEITERFASSUNG9
REPORT ZDEMO_ZEITERFASSUNG9.
Types: Begin of ttab,
        Rec(1000) type c,
       End of ttab.
DATA: itab type table of ttab.
DATA: wa_tab type ttab.
DATA: file_str type string.
Parameters: p_file type localfile.
At selection-screen on value-request for p_file.
                                       CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
                                        EXPORTING
*                                          PROGRAM_NAME        = SYST-REPID
*                                          DYNPRO_NUMBER       = SYST-DYNNR
*                                          FIELD_NAME          = ' '
                                           STATIC              = 'X'
*                                          MASK                = ' '
                                         CHANGING
                                           file_name           = p_file.
*                                        EXCEPTIONS
*                                          MASK_TOO_LONG       = 1
*                                          OTHERS              = 2
Start-of-Selection.
file_str = P_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\BUP_ZEIT.DAT'   " This the file source address
      FILETYPE                      = 'DAT'
      HAS_FIELD_SEPARATOR           = ';'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*     CODEPAGE                      = ' '
*     IGNORE_CERR                   = ABAP_TRUE
*     REPLACEMENT                   = '#'
*     CHECK_BOM                     = ' '
*     VIRUS_SCAN_PROFILE            =
*     NO_AUTH_CHECK                 = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    tables
      data_tab                      = itab
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP at itab into wa_tab.
        WRITE: / wa_tab.
ENDLOOP.
I will be grateful to all you experts for ur inputs
regards
Chandan Singh

For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = 'C:\temp\test.txt'
CHANGING
    data_tab = lt_data
EXCEPTIONS
    OTHERS   = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
      ls_str TYPE ty_str,
      lv_block TYPE string,
      lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
    WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
         OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
      lv_block = lv_data.
      lv_flag = abap_false.
    WHEN OTHERS.
      lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
    WHEN '[Auftrag]'.
      SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
    WHEN '[Position]'.
      SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
      APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP.

Unicode export:Table-splitting and package splitting

Hi SAP experts,
I know there are lot of forums related to this topic, but I have some new questions and hence posting a new thread.
We are in the process of doing unicode conversion in our landscape(CRM 7.0 system based on NW 7.01) and we are running on AIX 6.1 and DB2 9.5. The database size is around 1.5 TB and hence, we want to go in for optimization for export and import in order to reduce the downtime.As a part of the process, we have tried to do table-splitting and parallel export-import to reduce the downtime.
However, we are having some doubts whether this table-splitting has actually worked in our scenario,as the export has exeucted for nearly 28 hours.
The steps followed by us :
1.) Doing the export preparation using SAPINST
2.) Doing table splitting preparation, by creating a table input file having entries in the format <tablename>%<No.of splits>.Also, we have used the latest R3ta file and the dbdb6slib.o(belonging to version 7.20 even though our system is on 7.01) using SAPINST.
3.) Starting with the export using SAPINST.
some observations and questions:
1.) After completion of tablesplitting preparation, there were .WHR files that were generated for each of the tables in DATA directory of export location. However, how many .WHR files should be created and on what basis are they created?
2.) I will take an example of a table PRCD_CLUST(cluster table) in our environment, which we had split. We had 29 *.WHR files that were created for this particular table. The number of splits given for this table was 36 and the table size is around 72 GB.Also, we noticed that the first 28 .WHR files for this table, had lots of records but the last 29th .WHR file, had only 1 record. But we also noticed that, the packages/splits for the 1st 28 splits were created quite fast but the last one,29th one took a long time(serveral hours) to get completed.Also,lots of packages were generated(around 56) of size 1 GB each for this 29th split. Also, there was only one R3load which was running for this 29th split, and was generating packages one by one.
3.) Also,Our question here is that is there any thumb rule for deciding on the number of splits for a table.Also, during the export, are there any things that need to be specified, while giving the inputs when we use table splitting,in the screen?
4.) Also, what exactly is the difference between table-splitting and package-splitting? Are they both effective together?
If you have any questions and or need any clarifications and further inputs, please let me know.
It would be great, if we could get any insights on this whole procedure, as we know a lot of things are taken care by SAPINST itself in the background, but we just want to be certain that we have done the right thing and this is the way it should work.
Regards,
Santosh Bhat

Hi,
First of all please ignore my very first response ... i have accidentally posted a response to some other thread...sorry for that
Now coming you your questions...
> 1.) Can package splitting and table-splitting be used together? If yes or no, what exactly is the procedure to be followed. As I observed that, the packages also have entries of the tables that we decided to split. So, does package splitting or table-splitting override the other, and only one of the two can be effective at a time?
Package splitting and table splitting works together, because both serve a different purpose
My way of doing is ...
When i do package split i choose packageLimit 1000 and also split out the tables (which i selected for table split) into seperate package (one package per table). I do it because that helps me to track those table.
Once the above is done i follow it up with the R3ta and wheresplitter for those tables.
Followed by manual migration monitor to do export/import , as mentioned in the previous reply above you need to ensure you sequenced you package properly ... large tables are exported first , use sections in the package list file , etc
> 2.) If you are well versed with table splitting procedure, could you describe maybe in brief the exact procedure?
Well i would say run R3ta (it will create multiple select queries) followed by wheresplitter (which will just split each of the select into multiple WHR files) ...
Best would go thought some document on table spliting and let me know if you have specific query. Dont miss the role of hints file.
> 3.) Also, I have mentioned about the version of R3ta and library file in my original post. Is this likely to be an issue?Also, is there a thumb rule to decide on the no.of splits for a table.
Rule is use executable of the kernel version supported by your system version. I am not well versed with 7.01 and 7.2 support ... to give you an example i should not use 700 R3ta on 640 system , although it works.
>1.) After completion of tablesplitting preparation, there were .WHR files that were generated for each of the tables in DATA directory of export location. However, how many .WHR files should be created and on what basis are they created?
If you ask for 10 split .... you will get 10 splits or in some case 11 also, the reason might be the field it is using to split the table (the where clause). But not 100% sure about it.
> 2) I will take an example of a table PRCD_CLUST(cluster table) in our environment, which we had split. We had 29 *.WHR files that were created for this particular table. The number of splits given for this table was 36 and the table size is around 72 GB.Also, we noticed that the first 28 .WHR files for this table, had lots of records but the last 29th .WHR file, had only 1 record. But we also noticed that, the packages/splits for the 1st 28 splits were created quite fast but the last one,29th one took a long time(serveral hours) to get completed.Also,lots of packages were generated(around 56) of size 1 GB each for this 29th plit. Also, there was only one R3load which was running for this 29th split, and was generating packages one by one.
Not sure why you got 29 split when you asked for 36, one reason might be the field (key) used for split didn't have more than 28 unique records. I dont know how is PRCD_CLUST split , you need to check the hints file for "key". One example can be suppose my table is split using company code, i have 10 company codes so even if i ask for 20 splits i will get only 10 splits (WHR's).
Yes the 29th file will always have less records, if you open the 29th WHR you will see that it has the "greater than clause". The 1st and the last WHR file has the "less than" and "greater than" clause , kind of a safety which allows you to prepare for the split even before you have downtime has started. This 2 WHR's ensures that no record gets missed, though you might have prepared your WHR files week before the actual migration.
> 3) Also,Our question here is that is there any thumb rule for deciding on the number of splits for a table.Also, during the export, are there any things that need to be specified, while giving the inputs when we use table splitting,in the screen?
Not aware any thumb rule. First iteration you might choose something like 10 for 50 GB , 20 for 100 GB. If any of the tables overshoots the window. They you can give a try by increase or decrease the number of splits for the table. For me couple of times the total export/import time have improved by reducing the splits of some tables (i suppose i was oversplitting those tables).
Regards,
Neel
Edited by: Neelabha Banerjee on Nov 30, 2011 11:12 PM

How to get the current selected column and row

Hi,
A difficult one, how do i know which column (and row would also be nice) of a JTable is selected?
e.g.
I have a JButton which is called "Edit" when i select a cell in the JTable and click the button "Edit" a new window must be visible as a form where the user can edit the a part of a row.
Then the column which was selected in the JTable must be given (so i need to know current column) and then i want the TextField (the one needed to be edited) be active with requestFocus(). So it would be
pricetextfield.requestFocus();
Problem now is that i have to click every time in the window the JTextField which was selected in the JTable. I have chosen for this way of editing because my application is multi-user and it would be too difficult for me when everybody did editing directly (catch signals, reload data, etc.).
My question is how do I know the current column and the current row in a JTable?

I'm not sure what your mean by the "current" row or column, but the following utility methods return
which row and column have focus within the JTable.
public static int getFocusRow(JTable table) {
return table.getSelectionModel().getLeadSelectionIndex();
public static int getFocusColumn(JTable table) {
return table.getColumnModel().getSelectionModel().getLeadSelectionIndex();
}

Multi-Mapping and Message Split using BPM

Hi All,
Could anyone pls let me know clearly how message mapping can be done for this weblog
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanks,
Ram

Hi,
When you are doing Message mapping after adding the Messaget types for source and target messages. You can click on the "" button in the target message and add one more tab. You can go to Message tab as shown in the 5th image and click "" button to add one more message type. Then do the mapping as usual.
<b>Based on the value of the element(name), the node of input(details)should be directed to one of the two message types</b>
Here in this blog it is done based on the Name.
You need to use IFTHENELSE boolean function and do the mapping.
Thanks,
Prakash

Multiple columns and rows in MessageService

I am attempting to create a message (via MessageService) which has multiple lines of data, and each line has multiple data columns.
Background: My program reads data from a web store, and creates Sales Orders in SBO. A single run might process multiple orders. When all orders have been entered, the program should send a (single) message to a list of recipients. The message will have one line of data for each sales order produced. Each line will contain two fields: the linked SBO sales order number, and the unlinked web order number.
When the message is initially created, I'm defining the multiple columns and initializing the data lines:
pMessageDataColumns = oMessage.MessageDataColumns
pMessageDataColumn = pMessageDataColumns.Add()
pMessageDataColumn.ColumnName = "SalesOrder"
pMessageDataColumn.Link = BoYesNoEnum.tYES
pMessageDataColumn = pMessageDataColumns.Add()
pMessageDataColumn.ColumnName = "WebOrder"
pMessageDataColumn.Link = BoYesNoEnum.tNO
oLines = pMessageDataColumn.MessageDataLines()
Later, as each Sales Order is processed, I'm attempting to inject the two data values into the message data:
oLine = oLines.Add()
oLine.Value = Str(pOrd.DocNum)
oLine.Object = 17
oLine.ObjectKey = Str(pOrd.DocEntry)
oLine = oLines.Add()
oLine.Value = pOrd.WebOrder
The above code would be invoked for each Sales Order processed. However, it generates an "Internal error (-5002) occurred" when the message is ultimately sent.
The SDK documentation states:
The MessageDataLine is a child data structure related to the MessageDataColumn. It contains the value of a specified cell in the Data table, which is defined by its column number (vtIndex of Item of MessageDataColumns) and row number (vtIndex of Item of MessageDataLines).
I guess I don't understand the relationship between adding a "line" in my data display versus adding data into a "column". It appears that the "oLines.Add()" is used to bump across the columns of the data. If so, how do I advance to the next entire row of data in the message?
Thanks, Dave

    Class Item
        Public ItemCode As String
        Public Dscription As String
    End Class
Dim ItemCodes as new list( of item)
Dim one as new item
one.ItemCode = "ItemCode"
one. Dscription ="Name of Item"
itemcodes.add (one)
        Try
            Dim oCmpSvc As SAPbobsCOM.CompanyService = _ocmp.GetCompanyService()
            Dim oMsgSvc As SAPbobsCOM.MessagesService = oCmpSvc.GetBusinessService(ServiceTypes.MessagesService)
            Dim oMsg As SAPbobsCOM.Message = oMsgSvc.GetDataInterface(MessagesServiceDataInterfaces.msdiMessage)
            oMsg.Subject = DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss")
            oMsg.Text = Msg
            Dim oMsgDataColumn As SAPbobsCOM.MessageDataColumn
            If ItemCodes.Count > 0 Then
                oMsgDataColumn = oMsg.MessageDataColumns.Add()
                oMsgDataColumn.ColumnName = "Product / Item Code"
                oMsgDataColumn.Link = BoYesNoEnum.tYES
                For Each oneitem As Item In ItemCodes
                    Dim oMsgDataLine As SAPbobsCOM.MessageDataLine = oMsgDataColumn.MessageDataLines.Add()
                    oMsgDataLine.Object = "4"
                    oMsgDataLine.ObjectKey = oneitem.ItemCode
                    oMsgDataLine.Value = oneitem.Dscription
                Next
                oMsgDataColumn = oMsg.MessageDataColumns.Add()
                oMsgDataColumn.ColumnName = "Description"
                oMsgDataColumn.Link = BoYesNoEnum.tNO
                For Each oneitem As Item In ItemCodes
                    Dim oMsgDataLine As SAPbobsCOM.MessageDataLine = oMsgDataColumn.MessageDataLines.Add()
                    oMsgDataLine.Value = oneitem.Dscription
                Next
            End If
                    Dim oMsgRecipient As SAPbobsCOM.Recipient = oMsg.RecipientCollection.Add()
                    oMsgRecipient.UserCode = "manager"
                    oMsgRecipient.SendInternal = BoYesNoEnum.tYES
                    oMsgRecipient.SendEmail = BoYesNoEnum.tNO
            oMsgSvc.SendMessage(oMsg)
            MsgBox("SAP B1 internal Message sent...")
        Catch ex As Exception
            MsgBox("Unable to send SAP B1 internal message. Error:" + ex.Message)
        End Try
    End Sub

Finding missed sequence numbers and rows from a fact table

Finding missed sequence numbers and rows from a fact table
Hi
I am working on an OLAP date cube with the following schema:
As you can see there is a fact transaction with two dimensions called cardNumber and Sequence. Card dimension contains about three million card numbers.
Sequence dimension contains a sequence number from 0 to 255. Fact transaction contains about 400 million transactions of those cards.
Each transaction has a sequence number in 0 to 255 ranges. If sequence number of transactions of a card reaches to 255 the next transaction would get 0 as a sequence number.
For example if a card has 1000 transactions then sequence numbers are as follows;
Transaction 1 to transaction 256 with sequences from 0 to 255
Transaction 257 to transaction 512 with sequences from 0 to 255
Transaction 513 to transaction 768 with sequences from 0 to 255
Transaction 769 to transaction 1000 with sequences from 0 to 231
The problem is that:
Sometimes there are several missed transactions. For example instead of sequence from 0 to 255, sequences are from 0 to 150 and then from 160 to 255. Here 10 transactions have been missed.
How can I find all missed transactions of all cards with a MDX QUERY?
I really appreciate for helps

Thank you Liao
I need to find missed numbers, In this scenario I want the query to tell the missed numbers are: 151,152,153,154,155,156,157,158,159
Relative transactions are also missed, so I think it is impossible to get them by your MDX query
Suppose this:
date
time
sequence
20140701
23:22:00
149
20140701
23:44:00
150
20140702
8:30:00
160
20140702
9:30:00
161
20140702
11:30:00
162
20140702
11:45:00
163
As you can see the sequence number of the last transaction at the 20140701 is 150
We expecting that the first transaction of the next day should be 151 but it is 160. Those 10 transactions are totally missed and we just need to
find missed sequence numbers

Budget Report to show the fixed and variable split for Materials

Hello Gurus,
Could you tell me if there is a budget standards report that will show the fixed and variable split for Materials? Example: Labor, Equip., QC and Overheads?
I need it for the correctly rolled-up 'final material number' step. The report that does this now (without fixed and var split) is the Indented BOM Comparison (sret - cost mgmt-product costing - cost mgmt-customized reports - cost estimate comparison - costed multilevel compare rpt - Indented BOM Comparison).
Thanks,
Jefferson

one simple way is in your final itab declare a slno type i field
data : begin of itab occurs 0,
slno type i,
<other fields>
end of itab.
after filling the data in itab.
loop at itab.
itab-slno = sy-tabix.
modify itab.
endloop.
in fieldcatalog also you have to define that slno field as the first column.
but it will change its order if you are sorting the output or filtering the output.
regards
shiba dutta

Extract Pages- and the Split- not doing what I expect them to

I have a document created in Illustrator (CS4) which has multiple artboards. I want it split into multiple documents, one art board—> one document with only that artwork. When I use the Extract PAges… and the Split… comands to generate multiple documents, I get the multiple docs (same number of docs created as pages in original doc).
Only thing is every doc has all the artboards and all the artwork as the original doc. I could understand all the artwork being there but all the artboards also?? What's going on?
Appreciate any pointers on this.
Trying to write a JSX to run in AI but struggling so far. Thread for AI solution started here: AS) export single page PDFs from multi-artboards

I don't expect mind reading but I'l settle for careful reading
I tried to explain how pages and artboards are qualitatively different objects only to be told they are the same thing and that's all I needed to say.
I tried to explain that opening the very same file in Illustrator showed a lot more objects than it did in Acrobat. You probably don't remember because you breezed over something that you didn't think you needed to know because you were, at each stage, a step ahead of me (slow down already!).
From my second post:
I can't remember if Splitting gave enumerate files or the one file but either way ALL the artwork was in the enumerate files if they got made [.…] I ended up saving as CS3 .ai files which gives a Save artboards to seperate files option and, unlike the artboard range option on Save As PDF, it actually works.
From my third post
An artboard is not a page as far as Acrobat and Illustrator apps are concerned. I was trying to highlight the distinctly different way the two apps handle them. I can watch a one page with just one shape document in Acrobat become a 20 artboard, 40+ objects layout in Illustrator. Same document interpreted as one Page in Acrobat and 23 artboards in AI.
I was on this forum because even a manual Document Menu> Split… command is not doing what I expected with the AI generated 23pp PDF file. I expected the 23 individual 'artboards' and content to each make a separate file.
Thom Parker wrote:
I don't remember you mentioning that you re-imported the PDF files into Illustrator. This is an important detail. You also posted to an Acrobat scripting forum and never said you were not interested in an Acrobat Script. You also never explained the problem you were seeing. You were never clear.
Covered that but note Illustrator doesn't import PDF files. .ai .eps and .pdf are all native files for Illustrator and just open, sometimes with an additional dialogue to choose a page from multiple pages. It imports .dwg, .svg and that sort of thing relying on translator plugins. This is the fourth time I'm saying I should have posted in Acrobat Win or Mac not scripting, apologies I was scripting when I made OP and probably frustrated. You were more clear it's true, clearly ignoring what I was getting at in each post re artboard cf. page objects.
You see, in a PDF file each page has it's own content stream, i.e., a stream of vector graphics operators. Graphics can be drawn anywhere in the coordinate space, but the page view is clipped by a crop rectangle. So graphics can exist in the stream, but never be visible to the user because they are outside the crop. I get the impression that in Illustrator the Artboards all exist in a single coordinate space? And that the conversion to PDF places this entire coordinate space into a single content stream. Then each page would be a different crop of the same content stream. If this is the case then I believe there are PDF optimization operations in Acrobat that would fix your problem by removing all content outside the crop.
Yeah I've hacked lots of PDF files in AI. They use more than one clipping rect per page from memory. Correct, the artboards are defined in a single co-ord space it would seem — artboards are discretely and independently located on the document canvas and can even overlap each other. Yes those operations might work, I never though of that, I came across an Illustrator based solution early on in this thread. There's no conversion going on in Acrobat though I think, the file stays native PDF from AI to Acrobat and back to AI. As I've noted it's the way Acrobat displays or parses the data that in effect hides all the 'off-page' objects but open the same file in AI and it's all still there.
You know, we can't read minds, you actually have to explain what it is you need.
I didn't know it, but I needed to get a confirmation on the artboardRange property bug in Illustrator CS4 and/or a confirmation that artboards are not treated as page objects, and I ended up having to lecture you on something you may have no interest in, sorry if I've been a pain. This is part of bigger bug elsewhere that I've been trying to get resolved or around on and off for a month. Every turn another bug, it gets confusing and frustrating at times

Multi mapping and message splitting in BPM

Hi ,
I am working with this scenario ...
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
how many message interfaces i have to create .
one outbound , one abstract and two inbound .. is it correct.

Hi
Minimum you need to create three message interfaces i.e. Bpm_In_MI_Abstract, aBpm_Out_MI_Abstract Bpm_Out1_MI_Abstract, because abstract interfaces can be use inbound and outbound as well.
You can also use create implement it by using inbound and outbound message interfaces. In that case you have to use three additional interfaces(1 outbound and 2 inbound).
Regards
Sami
Reward points if helpful.

Tabel and row split

Similar Messages

Maybe you are looking for