Table row split

Table row split sccripting.
5 paragraphs in one row in table. i need 5 paragraphs in 5rows. please help some one.
e.g. is below:
Header 1
Header 2
1
2
3
4
5
change,
Header 1
Header 2
1
2
3
4
5
Thanks,
Senthil

The basic technique I'd use would be to add rows after the row of interest and then move the last paragraph to the corresponding cell on the next row (that you just added) until there's only one paragraph left in the cell.
I'm a JavaScripter, so I'm not sure if the code I'd post would help. Is this something you want to do just once? Or are you faced with a lot of tables in this state that need this process applied to them?
Dave

Similar Messages

How can I export table row in internet explorer?

I need to export a single table row on a website and I can't figure out how to do it. The source view for the row I need is:
tr class="alt">
<td id="16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE">16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE</td>
<td></td>
<td></td>
<td>0.00065227</td>
<td>0.01233629</td>
<td>0.00371003</td>
</tr>I can get the table ID using the code below, but I don't know how to get the rest of the values. The table ID does not change but the numerical values do.$ie = New-Object -com InternetExplorer.Application
$ie.silent = $false
$ie.navigate2("mywebsite.com")
$ie.Document.getElementById("16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE")

Hi Tom,
this may not be quite the perfect solution, but it works for me at least. I'm not using the IE ComObject, but rather the .NET Webclient for it ...
# Load downloader function
function Get-WebContent
<#
.SYNOPSIS
Downloads a file
.DESCRIPTION
Download any file using a valid weblink and either store it locally or return its content
.PARAMETER webLink
The full link to the file (Example: "http://www.example.com/files/examplefile.dat"). Adds "http://" if webLink starts with "www".
.PARAMETER destination
The target where you want to store the file, including the filename (Example: "C:\Example\examplefile.dat"). Folder needs not exist but path must be valid. Optional.
.PARAMETER getContent
Switch that controls whether the function returns the file content.
.EXAMPLE
Get-WebContent -webLink "http://www.technet.com" -destination "C:\Example\technet.html"
This will download the technet website and store it as a html file to the target location
.EXAMPLE
Get-WebContent -webLink "www.technet.com" -getContent
This will download the technet website and return its content (as a string)
#>
Param(
[Parameter(Mandatory=$true,Position="0")]
[Alias('from')]
[string]
$WebLink,
[Parameter(Position="1")]
[Alias('to')]
[string]
$Destination,
[Alias('grab')]
[switch]
$GetContent
# Correct WebLink for typical errors
if ($webLink.StartsWith("www") -or $webLink.StartsWith("WWW")){$webLink = "http://" + $webLink}
$webclient = New-Object Net.Webclient
$file = $webclient.DownloadString($webLink)
if ($destination -ne "")
try {Set-Content -Path $destination -Value $file -Force}
catch {}
if ($getContent){return $file}
# Download website
$website = Get-WebContent -WebLink "http://www.mywebsite.com" -GetContent
# Cut away everything before the relevant part
$string = $website.SubString($website.IndexOf('<td id="16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE">'))
# Cut away everything after the row
$string = $string.SubString(0,$string.IndexOf('</tr>'))
# Split the string into each individual line
$lines = $string.Split("`n")
# Prepareing result variable
$results = @()
# For each line, cut away the clutter
foreach ($line in $lines)
$temp = $line.SubString(4,($line.length - 10))
# for the first line, the td has an id, which this compensates for
if ($temp -like 'id="16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE">*'){$temp = $temp.SubString(($temp.IndexOf(">") + 1))}
# Add cleaned line to results
$results += $temp
You may need to adapt the string parsing beneath the function, if the text you posted is not literally identical to the way this function returns it. It worked for a string block acquired via copy&paste from your post anyway. :)
I certainly would be more than happy to read a more elegant version, if someone has one to offer.
Cheers,
Fred
There's no place like 127.0.0.1

Ajx problem with jsp .not able to show ajax response data in table rows

hi evryone
i m new to ajax .i m not able solve this problem .pls help if anyone understood my problem
probelm scenario is like this:
take a example of shopping page where a field amount changes every time (time interval) ,the amount data is coming from database .ok...
this i m trying to do with ajax and want to display the value in table rows one by one ..but response whihc i m getting is different .....same value is diaplying in evry rows .which i dont want
the output it coming now is:like this
item amount
item 1 20
item2 20
item 3 20
i want like thi s
item amount
item 1 20
item2 30
item 3 40
even in database the value is 20,30,40
here is the code of two jsp page
one is ajaxitem_amount.jsp
<%
try
stmt3 = con.createStatement();
String itemQ="select item_ref_id,quantity from item_master where shop_ref_id="+shopid+" and (status is null or status<>'w') order by item_ref_id";
//out.println(railQ);
rs_details=stmt3.executeQuery(itemQ);
while(rs_details.next())
item2 = rs_details.getInt("ITEM_REF_ID");
v.add(new Integer(item2));
String aString = Integer.toString(item2);
itemids.add(aString);
Enumeration enum = v.elements();
for (j=0; j<v.size(); j++)
//out.println("v[" + j + "] = " + v.elementAt(j));
sql3="select max(shop_amount) from shop_floor_temp where item_ref_id="+v.elementAt(j);
rs_bid=stmt3.executeQuery(sql3);
if(rs_price.next())
last_price=rs_price.getDouble(1);
if(last_price != 0)
lprice= last_price;
else
lprice=1;
out.print("<response>");
out.print(lprice+"|");
out.print("</response>");
out.print("\n");
catch(Exception ex)
out.print("ERROR"+ex);
// out.println("<?xml version=\"1.0\" encoding=\"UTF-8\"?>");
_another is main shopping
<td bgcolor="#C5B9AB" width="10%" align="center">
<strong><font face="Verdana" size="2">Last price</font></strong>
int tabrowcounter=0;
while(rs_details.next())//some query
tabrowcounter++;
//*some more data is displayed here one by one all are working instead of this which i am calling from another page ajaxitem_amount.jsp page*
<td bgcolor='<%=colorjava%>' width="50%" align="center">
<div id="responseimage<%=tabrowcounter%>"></div>
<div id="responseOutput<%=tabrowcounter%>"></div>
<SCRIPT LANGUAGE="JavaScript">
function createXHR<%=tabrowcounter%>()
try { return new XMLHttpRequest(); } catch(e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.6.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.3.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) {}
try { return new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) {}
alert("XMLHttpRequest not supported");
return null;
function sendRequest<%=tabrowcounter%>()
document.getElementById('responseimage<%=tabrowcounter%>').innerHTML ="<IMG SRC='load.gif'> ";
document.getElementById('responseimage<%=tabrowcounter%>').style.display = 'block';
document.getElementById('responseOutput<%=tabrowcounter%>').style.display = 'none'
var url="ajaxauct_floor.jsp";
var xhr = createXHR<%=tabrowcounter%>();
if (xhr)
xhr.open("get",url,true);
xhr.onreadystatechange = function()
handleResponse<%=tabrowcounter%>(xhr);
xhr.send(null);
function handleResponse<%=tabrowcounter%>(xhr)
if (xhr.readyState == 4 && xhr.status == 200)
try
var data = xhr.responseText.split("|");
//document.write(data);
//updatePage<%=tabrowcounter%>(xhr.responseText);
//document.write(xhr.responseText);
setTimeout('sendRequest<%=tabrowcounter%>()',10000);
for(var x=0;x<data.length-1;x++)
//alert(data);
document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[x];
document.getElementById('responseimage<%=tabrowcounter%>').style.display = 'none'; // HIDE
document.getElementById('responseOutput<%=tabrowcounter%>').style.display = 'block'
//document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[0];
//document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[0];
catch(e)
alert('1 '+e)
sendRequest<%=tabrowcounter%>();
</SCRIPT>
</td>
</tr></table>
if anyone have understood my problem pls help me .i have tried lot but not working .anyone genius here ?thnak you

thanks baluc
thanks for correcting me and giving me a good advice .anyway i m trying make you understand once again ...
if you have understood this time please do reply .else i m sorry for placing wrong question ....
hi everyone
I m new to Ajax .I m not able solve this problem .pals help if anyone understood my problem
problem scenario is like this:
take a example of shopping page where a field amount changes every time (time interval) ,the amount field* (this data is coming from database )
this I m trying to do with Ajax and want to display the value in table rows one by one ..But response which I m getting is different.....same value is displaying in every rows .which I don't want
The output it coming now is: like this
item amount
item 1 20
item2 20
item 3 20
I want like this s
item amount
item 1 20
item2 30
item 3 40
even in database the value is 20,30,40
here is the code of jsp page
one page is ajaxitemamount.jsp_*
<%
try
stmt3 = con.createStatement();
String itemQ="select item_ref_id,quantity from item_master where shop_ref_id="+shopid+" and (status is null or status<>'w') order by item_ref_id";
//out.println(railQ);
rs_details=stmt3.executeQuery(itemQ);
while(rs_details.next())
item2 = rs_details.getInt("ITEM_REF_ID");
v.add(new Integer(item2));
String aString = Integer.toString(item2);
itemids.add(aString);
Enumeration enum = v.elements();
for (j=0; j<v.size(); j++)
//out.println("v[" + j + "] = " + v.elementAt(j));
sql3="select max(shop_amount) from shop_floor_temp where item_ref_id="+v.elementAt(j);
rs_bid=stmt3.executeQuery(sql3);
if(rs_price.next())
last_price=rs_price.getDouble(1);
if(last_price != 0)
lprice= last_price;
else
lprice=1;
out.print("<response>");
out.print(lprice+"|");
out.print("</response>");
out.print("\n");
catch(Exception ex)
out.print("ERROR"+ex);
// out.println("<?xml version=\"1.0\" encoding=\"UTF-8\"?>");
another is main shopping page page 2*
<td bgcolor="#C5B9AB" width="10%" align="center">
<strong><font face="Verdana" size="2">Last price</font></strong>
int tabrowcounter=0;
while(rs_details.next())//some query
tabrowcounter++;
<td bgcolor='<%=colorjava%>' width="50%" align="center">
<div id="responseimage<%=tabrowcounter%>"></div>
<div id="responseOutput<%=tabrowcounter%>"></div>
<SCRIPT LANGUAGE="JavaScript">
function createXHR<%=tabrowcounter%>()
try { return new XMLHttpRequest(); } catch(e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.6.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.3.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) {}
try { return new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) {}
alert("XMLHttpRequest not supported");
return null;
function sendRequest<%=tabrowcounter%>()
document.getElementById('responseimage<%=tabrowcounter%>').innerHTML ="<IMG SRC='load.gif'> ";
document.getElementById('responseimage<%=tabrowcounter%>').style.display = 'block';
document.getElementById('responseOutput<%=tabrowcounter%>').style.display = 'none'
var url="ajaxauct_floor.jsp";
var xhr = createXHR<%=tabrowcounter%>();
if (xhr)
xhr.open("get",url,true);
xhr.onreadystatechange = function()
handleResponse<%=tabrowcounter%>(xhr);
xhr.send(null);
function handleResponse<%=tabrowcounter%>(xhr)
if (xhr.readyState == 4 && xhr.status == 200)
try
var data = xhr.responseText.split("|");
//document.write(data);
//updatePage<%=tabrowcounter%>(xhr.responseText);
//document.write(xhr.responseText);
setTimeout('sendRequest<%=tabrowcounter%>()',10000);
for(var x=0;x<data.length-1;x++)
//alert(data);
document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[x];
document.getElementById('responseimage<%=tabrowcounter%>').style.display = 'none'; // HIDE
document.getElementById('responseOutput<%=tabrowcounter%>').style.display = 'block'
//document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[0];
//document.getElementById('responseOutput<%=tabrowcounter%>').innerHTML = data[0];
catch(e)
alert('1 '+e)
sendRequest<%=tabrowcounter%>();
</SCRIPT>
</td>
</tr></table>
if anyone have understood my problem please help me .i have tried lot but not working .anyone genius here ?thank you

Break table row across multiple frames?

Hi
I would know wether is possible to split a single table row across serverla frames/pages.
I´m using InDesign CS5 and when I try to import a big table from word documments (by using de app or by scripting), if a row is bigger than the textFrame, a blank page is generated with the overflow simbol.
The only way to see that table is by enlarging the textFrame.
I´ve been reading about this problem, and some news in 2004 reported it was a problem wich will be solved in next releases.
Is there any way to work arround?
One option is to split de row in several small rows, but I think the proper solution would be to let the row jump to the next TextFrame (just like word does)
Thanks in advance

I can show you a real example.
http://www.xunta.es/dog/Publicados/2011/20110615/AnuncioC3F1-140611-3147_gl.pdf
In page 14984 the row with the text "Coruña" span across two pages. Well, in this example, what we did was to convert the table in images. Then the images were put inside each page in InDesign.
This cell is too big to fit in a frameText and it was shown as empty.
Other option would be to split the row before the imporation. In this way, InDesign would, automatically jump to the next page.
The question was if there was any configuration option to implement all this solutions (change the table or convert it to text) without change the table structure.
Any way, thansk again.

Table row pagination question: not paginating between rows

I have a table with 13 rows + 1 header row. Most of the rows contain a single line of text that doesn't wrap, though 4 of the 13 have a single cell with text that wraps (to 3 lines) within the cell. This appears to be just shy of 1/2 page tall. The table is full (single) column width.
I have the table set as an inline object in the Object Placement inspector tab. (I want it to move with the associated text.)
In my document, the table is shifting to the top of a new page, leaving about 1/2 page of blank space on the page prior to the table beginning. I don't want this.
My desired layout is:
- Start the table immediately after its preceding text
- Display all the rows it can on that page
- Re-display the header on the next page
- Display any remaining rows
I've tried the following:
- Checked the Text > More inspector tab to make sure the "Keep lines together" checkbox isn't checked either for the table as a whole (can't be; it's greyed out), or for individual rows (isn't checked.)
- Tried different Placement > Wrap settings to see if changing it to left/right/above-below affects it (it doesn't);
- Added additional rows to the table to see if maybe there was just 1 orphan row and Pages didn't want to put 1 orphan on a second page. No go; I grew the table length with a dozen rows to reach 3/4 page in length, and it just kept growing the table (and pushing content) down, but not moving the start of the table "up" to the prior page
- Added additional rows to the table so that the table itself was > 1 page of rows. This did cause the table to split as I desire, repeating the table header. BUT, it did not move the table up to the prior page as desired.
- Removed some rows in the table to see if/when Pages would put the table on the prior page (where I want it to be). This worked to move it up earlier, but I do in fact need the removed rows, so this isn't a solution.
Note that I don't want to split the table manually (if I don't have to), because as I change the content over time, pagination is likely to change, too, and I don't want to have to re-merge the tables when the row-break should change.
What else should I be looking for? What setting am I missing? Or is Pages (which I mostly love) just not going to let me control where it thinks it wants to start the table?
Got any other ideas to check?
-jb

Jerrold -
First, thanks for hanging with me on this.
Second, in re: breaks, no - I already checked that. See:
Third, in re: removed rows, yes- if I remove the bottom 4 rows, the table snaps back up. See:
BUT, if I then tab from the bottom-right cell, and add a new row, the table pops back to the next page. See:
You'll note in the next screen capture that I can add a BUNCH of rows to get it to break across pages for a really-long table; it just won't move my start back up. See:
This is maddening.... Sigh. Par for the course with iWork; so much promise, yet so immature.

Avoid Row Splits across Pages

Hi,
In the report I'm working on - I've several groups. Each row in this group is reported as a table w/ 4 rows.
Question: How can I avoid row splits of this table across pages. Pls advice.
Thanks.

This method does work. I use it all of the time. What versions are you using (XML Publisher, MS Word e.t.c.). Are you sure you are saving the new version of the template? It should not get reset in the way you are saying.
Cheers,
Dave

View a single table-row as multiple rows in a GridControl

Hi,
is it possible to distribute the entries of a single row of a table/RowSetInfo over multiple lines of a GridControl?
I've seen an example on the Internet (http://www2.gol.com/users/tame/swing/examples/JTableExamples4.html) which does this without database connection but it seems as if it's necessary to replace the default JTable, TableModel and UI by customized ones. As far as I've seen it's not possible to replace the JTable which is used by a GridControl? So is there any other way to do this? (A modification of the JTable-UI itself doesn't suffice as the JTable yields wrong row- and column-numbers on mousclick-events and therefore the components of the second row are not enabled properly).
Thanks in advance
null

|I've seen an example on the Internet |(http://www2.gol.com/users/tame/swing/exampl|es/JTableExamples4.html) which does this |without database connection but it seems as |if it's necessary to replace the default |JTable, TableModel and UI by customized |ones.
You wont be able to replace the JTable. But you can change all the attributes on the internal table which the grid uses (see getTable() method). The datamodel for the grid is impemented by oracle.dacf.control.swing.GridDataSource. You can possibly extend this class. You can also change the Table column model and the renderers used by the Table.
|So is there any other way to do this? (A |modification of the JTable-UI itself doesn't |suffice as the JTable yields wrong row- and |column-numbers on mousclick-events and |therefore the components of the second row |are not enabled properly).
Could you expain how the mapping between cell renderer and the table (row, col) is done in the extended JTable - which class ?.
(http://www2.gol.com/users/tame/swing/exampl|es/JTableExamples4.html)
null

Opening a new view in a new window on click of a table row entry.

Hi Guys,
How to open a new View of a same application in a new window (just like a pop up) on a click of a Table Row entry?
I am using NWDS 7.0 version. So please suggest acccorrdingly.

Hi Nikesh,
first of all you will have to declare use of onLeadSelect event handler for your table (note that it will only be triggered when a lead selection occurs not a multiselection).
Also, you can build at design time a View and a Window (for example, PopupWin) in your WebDynpro Component, and embed the view into the window.
In your code for onLeadSelect function, you can use something like this to pop up the window.
public void onActionRowSelection(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionSeleccionTabla(ServerEvent)
    IWDWindowManager windowManager = wdComponentAPI.getWindowManager();
    IWDWindowInfo windowInfo = wdComponentAPI.getComponentInfo().findInWindows("PopupWin");
    IWDWindow window = windowManager.createModalWindow(windowInfo);
    window.setWindowPosition(WDWindowPos.CENTER);
    window.setWindowSize(new WDCssSize(450, WDWindowUnitOfLength.PX) , WDCssSize.UNDEFINED);
    // Store handle ti window in context attribute to able to close it later
    wdContext.currentContextElement().setPopup(window);
    window.show();
    //@@end
Hope it helps,
David

Pages 08 tables keep splitting themselves

I have just bought pages 08 so I may be being completely stupid. I am trying to create a schedule out of tables and it keeps splitting the tables up and reproducing one of them over again in the middle of the document and in all the wrong places.
Can anyone point me in the right direction?
Many thanks

Welcome to Apple Discussions
In the search box type +tables AND split+. I think you will find the answers you need there. I'm sure you will enjoy using pages, but like anything new, it will take a little getting used to.
Walt

How to pass hidden field values on a click of a table row

hi all,
href = "bookAndNonBook.do"
I am very new to struts. I have created a table using displaytable tag which displays results in a tabular format. In addtion, i have a hidden field (prodType), the table rows are getting highlighted when i get my mouse on a particular row.
Following is the code from the results.jsp file
<body
onload="addRowHandlers('row', 'rowMouseOver')"
bgcolor="#FFFFFF" text="#000000" leftmargin="100" topmargin="50"
marginwidth="" marginheight="" rightmargin="30">
<html:form action="/bookAndNonBook" method="post">
<display:table name="sessionScope.productSearchList" id="row"
sort="list" export="true" defaultsort="1" defaultorder="ascending"
pagesize="15" decorator="org.displaytag.decorator.TotalTableDecorator"
class="dataTable">
<display:column property="prodType" title="ProdType" class="prodType"
headerClass="prodType" media="html" />
<display:column title="Title" property="titleName" sortable="true"
class="title" headerClass="title" />
</display:table>
</html:form>
</BODY>
I am calling a funtion addRowHandlers which passes the table id (which is row) and the rowMouseover for highlighting the rows on mouse over.
the code for function addRowHandlers is
function addRowHandlers(tableId, rowClassName) {
var previousClass = null;
var table = document.getElementById(tableId);
var rows = table.getElementsByTagName("tr");
for (i = 1; i < rows.length; i++) {
rows.onmouseover = function () {
previousClass = this.className;
this.className = this.className + " " + rowClassName ;
this.style.cursor="hand";
rows.onmouseout = function () {
this.className = previousClass;
this.style.cursor='';
rows.onclick = function (){
var cell = this.getElementsByTagName("td")[0];
var ProdType = cell.innerHTML;
alert("value of prodType = " + ProdType);
when i run the above code and click on a particular row it returns me the value in the hidden field i.e. prodType for that particular row
Now where i am having problem is i want that on the basis of prodType my jsp file should call different actions for different prodType as returned....somwhat a function like this
function submitProduct(prodType) {
if(prodType == "BK")
resultsForm.action = "/bookProduct.do";
else if(prodType == "NB")
resultsForm.action = "/nonbookProduct.do";
but i am unable to figure out that how do i this..
Any help will be really appreciated
Thanks
Sam

can you please suggest some good struts forums where i can post my question
thanks in advance
Sam

Table.rows.find() returns null in a table where the row exists.

Hi...
I am working in a Project in Visual Studio 2013 where I have to read an Excel report related with a list of business opportunities. Some of the Fields that are involved in it are: Opportunity ID, BU, Account, close date, Account Manager,
Total Value and so on. As soon as I get the conection with the Excel Report, I fill a DataTable and declare the columns [Opportunity ID] and [BU] as my Primary Keys. In that way, an Opportunity value may have one o more rows
with different BU code each of them. In consequence, you can define one row in the table if you specify the [Opportunity ID] and the [BU] values.
My problem starts when I try to get information of those rows that have an specific value of [Opportunity ID]. For that situation I make a "foreach" structure where I check the BU codes that are involved with that Opportunity. So
I use the Find() Method to get the information of the row specified by the Opportunity ID and BU. The first time it goes to find the information it gets the results successfully but in the next cycle changing just the [BU] using the same [Opportunity
ID] value, the find() method returns a "null" and I do not know why because I am sure that the row exists in the table. I have verified the "Unique" property for the [Opportunity ID] and [BU] columns (which are
my primary keys) and they are in false which is OK.
I share the code that I am using...
Hope someone can help.
Thanks.
Alfmar.
void ObtenTotalesxBUs(string Opportunity, string[] BUs, Object[] TotalBUs, Object[] ExpTotalBUs)
ArrayList TotalesBUs = new ArrayList(); //Required information from the row.
ArrayList ExpTotalesBUs = new ArrayList(); //Required information from the row.
foreach(string businessUnit in BUs)
Object[] LlaveBusqueda = { Opportunity, businessUnit }; //Provide values to the Primary Keys.
DataRow RenglonInfo = null;
RenglonInfo = TablaFunnel.Tabla.Rows.Find(LlaveBusqueda); //Find method receives the Primary Keys values. Here is where I have a "null" in return the second time changing just the [BU] field.
TotalesBUs.Add(RenglonInfo["Total"]); //Get the required information from the row.
ExpTotalesBUs.Add(RenglonInfo["Expected Total Value"]); //Get the required information from the row.
TotalBUs = TotalesBUs.ToArray();
ExpTotalBUs = ExpTotalesBUs.ToArray();}

Hi Viorel..
Thanks a lot for you help.
I am absolutely sure that the second ítem of BU is valid and exist in the table because I tried to make a "Select" statement in the table providing the values of [Opportunity ID] and [BU] and I get the expected record. So, why is not
working using Find() with the defined Primary Keys???
I tried this in order to test that the record exists...
if(RenglonInfo == null)
string strSelect = "[Opportunity ID] = '0000218256' AND [BU] = 'SFW'";
RenglonInfo2 = TablaFunnel.Tabla.Select(strSelect);

Check for empty table row before adding date

On the form below, when I click the green + button (far right), a new table row is created with today's date. the user can then enter more text to the right of the date. Problem is when the form is saved and reopened, the text the user enters is deleted and new today's date added because it is in the intialize event. How do I script to check and make sure each dated row is empty before adding today's date?
https://acrobat.com/#d=qTINfyoXA-U6cDxOGgcSEw
Thanks,
~Don

Hi Don,
One option would be to use the caption area of the textfield for the date and leave the value portion free for the user to input their data:
if (xfa.resolveNode("this.caption.value.#text").value === "") {
this.caption.value.text = util.printd("[mm/dd/yy] ", new Date() );
See here: https://acrobat.com/#d=VjJ-YsXLKmV6QU84JrAAIw.
Hope that helps,
Niall

Pl/sql table - row type records

Hi,
Is there any limit on the number of records that a pl/sql table (row type) can accomodate.Iam using oracle 10g

user11200499 wrote:
I have gone thru that url, nothing on the maximum number of records that can be present in pl/sql table is given there. Will be very helpful if you can let me know if there is any such limitation.There is no such thing as a PL/SQL "+table+". A table, in Oracle terminology, means colums and rows and indexes and the ability to scale data, effectively read and process and filter and aggregate data.
A so-called PL/SQL "+table+" is nothing at all like this.
The correct term for it, and used in all other programming languages, are arrays (procedural term) and collections (object orientated term).
An array/collection is a local memory structure in the unit of code. In PL/SQL, that means PGA (process global area) memory. And as this uses server memory, you should not abuse it and only use as much that is truly needed.
Make a PL/SQL array/collection too large, and PGA grows.. and can have a very negative impact on performance. It can even cause the server to crawl to halt, where you will struggle to enter a commandline command on the server as it is spending 99% of CPU time trying to deal with memory requests and page swapping.
So what do we then use arrays/collections for in PL/SQL?
For the very same reason we use in any other programming language - dealing with managing local programming data in a more effective memory structure. Such as bulk processing when requiring a buffer variable that can be passed to and from the PL and SQL engines.
This does NOT mean using it as you would use it as if it is a SQL table. As it is not.
So to answer your question of how large a PL/SQL array or collection can be? That depends entirely on the problem you are trying to solve. If it is for example bulk processing, then typically a collection of a 100 rows provides the best balance between the amount of (expensive) PGA memory being used versus the increase in performance by reducing context switching between the PL and SQL engines.
If the rows are quite small, perhaps even a 1,000 row collection. More than that seldom decreases context switching enough to justify the increase in expensive PGA.
So what should then be used to store larger data structures in PL/SQL? GTT or Global Temporary Tables. As this is a proper SQL table structure. Can be indexed. Natively supports SQL. Can scale with data volumes.
And most importantly, it does not consume dedicated process memory and will not blow server memory.

Report Generation Toolkit Table Row Height-MS Word

I am having trouble setting the table row height in the report generation toolkit. I can set the column width fine, but the row height seems to remain the same no matter what I set it to. I have attached the VI that generates and formats the table, and the printout it is resulting in. I have also attached the template file I am using.
Any tips to get this to work right? I am trying to make the cells exactly the same height as the text inside.
Solved!
Go to Solution.
Attachments:
AddMarkersToReport.vi ‏20 KB
badFormatting.pdf ‏179 KB
splitter.docx ‏13 KB

Hi,
So I tried .2 and it didn't work. So I went to Word to manually change it, and it did not work either. There is a selection box in word, for the table properties, that seems to default to the value "at least". When I changed this manually to "exactly" in word, no problem with the .2 manually in Word.
Hopefully this can be set within the template, for all new inserted tables. I'm not sure the report generator VI's expose this property. Well, this is a start for the issue.
Edit ****
You can go into the add table VI and expose the property. See pic. However, you have to decide if you want to "upgrade" this VI permanently to expose this property or make a copy with the property exposed. I haven't messed with the new class reports too much, so not sure of the ins and outs with this.
I think this is the issue with the row size becoming smaller.
Mark Ramsdale

Smartforms how to print Table rows on to the next page automatically

if this question is answered pls point to the the link
SMART forms:
layout : Half of my A4 page is filled with templates, a small portion is footer, the middle portion is Table.
Note: i have set the condition for the footer as (tick the check box) "only after end of main window"
Output:
                   the template is displayed the table is populated on the first page, no footer on 1st page,
                on page 2 the table rows are printed (table rows were a lot) and finally footer got printed every thing as per normal
what i want is:
                 instead of the table lines printed in the middle of page 2 (bcz my main window table is in the middle, top is templates)
                 i want the table lines (after filling the main window table lines in the 1st page) to continue to print from the
                 top of the page on page 2 and immediately after the table rows finish. footer must be printed....
what should i be doing to get this output

dear bob,
yes i have done that already as u said, when i do it......
i created a new page (next page) directed first page to next page
on the next page my layout is like below
removed all the templates dragged the main window to the top of the page......
when i check the result, there is an empty line as the first line in the table (2nd page)
and also the footer (again a template) on the first page, which is ticked as ( print after end of main window) is NOT displaying.

Table row split

Similar Messages

Maybe you are looking for