TABLE COULD NOT BE CHANGED DUE ERROR "GENERATED ALWAYS AS..."

Version: 3.0.03 Build MAIN-03.97 with Oracle DB 11.2 R2
"GESAMTPREIS" NUMBER GENERATED ALWAYS AS (ROUND(TO_NUMBER(TO_CHAR("MENGE"))*TO_NUMBER(TO_CHAR("PREIS"))*TO_NUMBER(TO_CHAR("PROZENT"))/100,2)) VIRTUAL VISIBLE
=> Error-Message: Ausdruck kann keine Spalten oder Benutzerfunktionen verwenden. Literale Zeichenfolgen müssen in Anführungszeichen stehen: ...
Table could be generated but not changed!!!
Manfred

Hi Siva,
First check Transport request for extended check and consistency check. You will get errors. If there is no errors then goto se14
database utility and give the table name and click edit and select the adjust database table . Your problem will be solved.
Let me know if you have any further errors while doing this.
thank you
srinivas

Similar Messages

SMTP Message XS817 - Processing could not be continued due to a ...error

Hi Experts,
Recently configured SMTP. Most emails work fine except for these generated via an ABAP program. Specific error is:
Cannot process message in SAP System
Message no. XS817
Diagnosis
Processing could not be continued due to a technical or configuration
     error in the SAP system.
System Response
Processing was terminated.
Procedure
Processing was terminated in the SAP system. The reason is given in the
     details below:
Received e-Mail address Your OG&E Bill does match
Really cannot make heads or tails from this. Hoping someone can shed some light. Thanks in advance.
David Carr
Basis Administrator

I don't believe this to be a ABAP issue necessarily. Further study revealed that the message should say (I think): "received email address _________ does [not] match ESMTP format. So if my deduction is correct my question has changed. Where can I find what how ESMTP format is defined? Also, is there a method to configure this in such a way where these emails are acceptable? we currently have may examples where the sender address is "SAP System Transaction" or "Training and Development". The method in place now works fine through the internet gateway and mlunxsnd but our desire is to convert to SMTP. Thanks.
David
Edited by: Basis Team on Jun 28, 2010 2:46 PM

Crystal report error (The table '' could not be found)

Dear Expert,
As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
Using the 'Crystal reports for SAP B1', they already view the report.
But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
Thanks in advance for any help.

Hi ,
We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
Best regards,
Jadie

'file could not be written due to an error' when exporting jpg

I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
ANY IDEAS ANYONE? I'm trying not to have to reproduce days of work to remake the file.
many thanks,
P

Mylenium,
Sounds like you know a good deal about this product. Is there any way to restore a color profile/setting to an earlier point?
I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
Thanks,
Paul

ERROR: could not serialize access due to concurrent update

Hi.
I use ejb+glassfish+postgres in my project.
The project is a web application for finansial data transfering.
I have three DBs, long global transactions, serializable isolation level, container-managed transaction.
When i test the project with concurent threads, i get an exception: "ERROR: could not serialize access due to
concurrent update"
I read that when you get suck kind of error, your program must rollback current transaction and then reply this transaction.
what do i need to do to complete this transaction? :
1) rollback and reply transaction
2) maybe, the are other ways to reply transaction (for example: glassfish configurations, ....)
Edited by: 856539 on 04.05.2011 8:10

If your DAO is nicely separated from your service layer as it should be then the solution I suggested above works and doesn't require you to change many classes because you can catch the expection in the DAO layer and do the retry in the DAO layer. That's where the solution belongs too because it's only applicable for your current database solution (Postgres). i.e If you change your database solution you need to change your DAO anyway, but only your DAO. If you put the solution in your service layer (or client layer) then you need to change those layers when you change your database solution which defeats the purpose of the separation.
If you still want the interceptor approach, you need to check if the transaction has been marked for rollback back, then you need to join the transaction with EM.join and from there you attempt to close and discard the joined transaction before starting another one to invoke the retry operation on. Bear in mind that you only do the rety when the transaction was marked for roll back because of that specific exception. Needless to say that this doesn't seem to be a clean way to handle your transactions (if you can get it to work that is).

RAS Error - The table could not be found.

Hi,
Bo version : XI2 SP2
BO SDK : RAS
I am getting following error while setting table location for the report going against Sybase (ODBC CR driver 5.1 wired protocol) database report.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: The table 'CASH' could not be found.
Error in File C:\WINDOWS\TEMP\{6F59C5DB-DB01-4905-BFE6-5A302D2A9283}.rpt:
The table could not be found.---- Error code:-2147482939 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
what all properties needs to be set for Logon and also Location specific, any sample code for the RAS + ODBC + SYBASE will be highly appreciated.
code giving error
               // DatabaseController databaseController = reportClientDoc.getDatabaseController();
               Tables tables = reportClientDoc.getDatabaseController().getDatabase().getTables();
               ITable newTable = null;
               for (Object object : tables) {
                    Table table = (Table) object;
                    newTable = (Table) table.clone(true);
                    log.info("Table Name " + table.getName());
                    IConnectionInfo connectionInfo = table.getConnectionInfo();
                    com.crystaldecisions.sdk.occa.report.lib.PropertyBag propertyBag = connectionInfo.getAttributes();
                    log.info("propertyBag.size >> " + propertyBag.size());
                    databaseName = (String) propertyBag.get(DB_NAME);
                    dsnName = (String) propertyBag.get(DSN);
                    Set<Object> set = propertyBag.keySet();
                    for (Object key : set) {
                         log.info("Key >> " + key);
                         log.info(" === Value >> " + propertyBag.get(key));
                    log.info("----
                    // newTable.setQualifiedName(table.getAlias());
                    // Change connection information properties
                    connectionInfo = newTable.getConnectionInfo();
                    // Set new table logon properties
                    // 1. Set the DSN
                    // 2. Set the Data Source (Database)
                    PropertyBag newPropertyBag = (PropertyBag) propertyBag.clone(true);
                    // Set new table logon properties (the DSN and the data source)
                    PropertyBag logonPb = new PropertyBag();
                    //logonPb.putStringValue("DSN", dsnName);
                    logonPb.put("Database Type", "ODBC (RDO)");
                    logonPb.put("Data Source Name", dsnName);
                    logonPb.put("DSN", dsnName);
                    logonPb.putStringValue("Database", databaseName);
                    logonPb.putBooleanValue("UseDSNProperties", false);
                    String dataSource = "";
                    DatabaseInfoVO databaseInfoVO = null;
                    if (StringUtils.indexOf(dsnName, "XXXX") != -1) {
                         dataSource = "EPAM-" + databaseName;
                         databaseInfoVO = this.getDatabaseInfoMap().get(dataSource.toUpperCase());
                    } else if (StringUtils.indexOf(dsnName, "YYYY") != -1) {
                         dataSource = "EIMCO-" + databaseName;
                         databaseInfoVO = this.getDatabaseInfoMap().get(dataSource.toUpperCase());
                    } else if (StringUtils.indexOf(dsnName, "ZZZZ") != -1) {
                         dataSource = "CRD-" + databaseName;
                         databaseInfoVO = this.getDatabaseInfoMap().get(dataSource.toUpperCase());
                    } else if (StringUtils.indexOf(dsnName, "WWWW") != -1) {
                         dataSource = "AA-" + databaseName;
                         databaseInfoVO = this.getDatabaseInfoMap().get(dataSource.toUpperCase());
                    log.info("databaseInfoVO >>" + databaseInfoVO);
                    // Overwrite any existing properties with updated values
                    newPropertyBag.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, logonPb);
                    newPropertyBag.putStringValue(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsnName);
                    newPropertyBag.putStringValue(PropertyBagHelper.CONNINFO_CRQE_DATABASENAME, databaseName);
                    newPropertyBag.putStringValue(PropertyBagHelper.CONNINFO_DATABASE_DLL, "crdb_odbc.dll");
                    newPropertyBag.putBooleanValue(PropertyBagHelper.CONNINFO_CRQE_SQLDB, true);
                    newPropertyBag.putBooleanValue(PropertyBagHelper.CONNINFO_SSO_ENABLED, false);
                    set = newPropertyBag.keySet();
                    for (Object key : set) {
                         log.info("Key2 >> " + key);
                         log.info("Value2 >> " + newPropertyBag.get(key));
                    connectionInfo.setAttributes(newPropertyBag);
                    connectionInfo.setUserName(databaseInfoVO.getUserName());
                    connectionInfo.setPassword(EZSuiteEncodeUtil.decrypt(databaseInfoVO.getPassword()));
                    connectionInfo.setKind(ConnectionInfoKind.CRQE);
                    newTable.setConnectionInfo(connectionInfo);
                    newTable.setName(table.getName());
                    newTable.setAlias(table.getAlias());
                    newTable.setQualifiedName(table.getQualifiedName());
                    // Update the table information
                    reportClientDoc.getDatabaseController().setTableLocation(table, newTable);
Thanks,
Rupesh
Edited by: Rupesh Raut on Oct 28, 2008 8:45 PM
Edited by: Rupesh Raut on Oct 28, 2008 8:46 PM

Hi,
This error message appears when the user does not have sufficient rights to the business view on which the report is based.
To resolve this error message, open the Business View Manager and verify that the user's rights are set up correctly.
To view a report based on a business view, the user or the group to which the user belongs, must have 'View' rights to the business view. Also, verify that none of the groups, including the Everyone group, to which the user belongs, has been explicitly denied 'View' rights.
If this does'nt help try to update database driver.
Make the copy of database and save it with different name ( without underscore) and point the crystal report to it.
Regards,
Shweta

Your file could not be printed due to an error...

Hi All,
I have users with a Windows XP client running Office 2003 with the 2007 compatibility pack installed.
The printer is an HP OfficeJet 6500 709a. The user has not experienced any problems printing in the past, and can still print everything except this one Excel Workbook.
It is a 2010 workbook, I have even tried converting the workbook to a 2003 workbook, and I still get the same error.
The error is
Your file could not be printed due to an error on HP OfficeJet 6500 709a on Ne03:. There are several possible reasons:
There may not be enough memory available. Try closing files and programs you aren't using.
If you use a network for printing, there may be a problem with the network connection or the printer driver.
There may be loose cables or a bad connection between your computer and printer.
For more information about troubleshooting printing problems, click Help.
Like I said the client can print other spread sheets and I can print the workbook from other workstations.
Any advice would be appreciated.
Thank you in advance.
A user needs the admin password like nitro glycerine needs a good shake.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, I would like to confirm follow information.
Is this a network printer for specific user?
Have you install the last package for Office and last driver for Printer?
Could you please change another Printer or logon to another PC test this issue.
We can run the
Detect and Repair feature in your Office 2003 programs, you can refer to this link:
http://support.microsoft.com/kb/822238
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

The resource could not be saved due to unknown error

Hello,
After we installed the April 2015 CU on our Project 2010 farm, we have started to get the below error when we attempt to edit a Resource.
We did run the configuration wizard on both the app and WFE servers. Also, we are
not using any custom master page here.
So far below are the steps I have already tried and have not been successful.
Uncheck the 'Enable Dynamic content compression' and unchecked the 'Enable static content compression' as described in this
TechNet question. We did an IIS reset on all the App and WFE servers after making this change.
Confirmed that no services have stopped and that the service accounts have correct access level.
Everything else works in the PWA expect for this section. Has anyone else experienced this?
Thanks in advance for your response.

Hi Darogael,
Here is a similar thread which a bunch of advice. In particular try to edit and save the resource custom fields.
https://social.technet.microsoft.com/Forums/projectserver/en-US/638864dc-c085-4e93-b783-4dcea0f22f4e/edits-to-user-profiles-throwing-an-error-the-resource-could-not-be-saved-due-to-the-following
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1       localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0     localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry

Device Enrollment could not be installed due to an unexpected error

Hi I just installed OSX LION Server and want to enroll devices but I keep on getting the error : Device Enrollment could not be installed due to an unexpected error :
The profile “Device Enrollment (com.apple.ota."my-server-name-".private.bootstrap)” could not be installed due to an unexpected error.
My devices site is running properly, I can install Profiles but I cannot install any device, not even the mini I installed OSX Lion Server upon!
I already removed all certificates and keys for : ""my-server-name-".private" and recreated self signed certificates for SSL and code signing.
Any ideas?
Bert

So I just wasted half of a day on this, and at least for my own system I figured it out *without* doing a clean install.
1. First, check that you have opened the ports as suggested by others here.
2. If you've done that, then the problem may be a rogue entry in your DNS server setting. What that means is if you initially set up your server app with one name, then later switched it to a new one, the old name is still "hanging around" causing havoc. This was the problem. To fix, you can try the steps below. WARNING: this will wipe your open directory. Make a full backup! I'm not 100% sure that wiping your OD is necessary, but it worked for me. Turn off any services you're running.
3. Download the 10.7 server admin tools here: http://support.apple.com/kb/DL1419
4. Open up the WorkGroup manager, and select any network users you've created, then export them. You're backing them up because you're going to wipe your open directory.
5. Open Server Admin.app. Click on the reveal triangle for your server, and it will show an entry for "Open Directory". Click on that.
6. Click on the Settings gear in the top of the right panel.
7. Where it says Role: Open Directory Master, hit Change....
8. In the panel that pops up, hit "set up a standalone directory". It will warn you that it's going to wipe your server open directory data.
9. Now, on the left side of the same screen, select DNS, then hit the "zones" button on top.
10. Look for your old host name(s) there. Select any extra entries that have your old host names, and remove. DO NOT REMOVE your current name entry (the Primary Zone) or the reverse entry (Reverse Zone). If you remove those, you'll be totally hosed. Only remove redundant entries.
11. Back in the Server.app, go to the menu and select Manage -> Manage Network Accounts. It will ask you for some information as it sets up open directory again for you. Give it what it needs.
12. To re-import your saved account info, go to Manage -> Import Accounts From File. (I have not tried this step, but it *should* work. YMMV).
13. Now, go reactivate your profile manager, turn on device management. It should "think" for a bit while it churns through the new open directory data.
14. Now, it should work!!! (at least it does for me). I speculate that the name lookup was getting conflicting results from DNS, causing problems and confusion. This seems to have fixed it.
15. If that doesn't work, one other step I took (but it didn't seem to help by itself) was to wipe the device manager database. To do that, open a terminal and use
sudo /usr/share/devicemgr/backend/wipeDB.sh
WARNING: this will wipe any device info that you've set up. I don't think this is necessary, but might be used as a last ditch effort.
Hope that helps!

Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?

Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?

Questions on using a specific program should go in that program forum
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Error message: Table could not be found when opening reports with InfoView or CMC

Post Author: Giovanni
CA Forum: Authentication
Hi All,
I have Crystal Reports Server XI R2 installed on a server and the database folder (foxpro) is located on a different server. Crystal is connected to the database using an ODBC connection (UNC path).
When I try to preview a report in Infoview or CMC I get the following error: "There was an error retrieving data from the server: The table 'dp' could not be found. Error in File C:\WINDOWS\TEMP\{BC665D6D-95DE-426B-A7A2-EBF9D23F42F4}.rpt: The table could not be found."
dp is the name of one of our tables.
If I publish a report that uses sql database or a foxpro db that is located on the same server as Crystal Server I donu2019t receive any error message..
Please help if you can and thanks in advance.
Giovanni

Post Author: colin mackenzie
CA Forum: Authentication
Hi Giovanni.
This post of yours is going on 2 weeks old.
Have you solved your problem?

IDoc Error -Instance of object type could not be changed

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
Please suggest on this
Thanks
Ajit

Hi Madhu
All these POs are uploaded during the Cutover Activities only, I am not sure whether it is uploaded through LSMW or not. What I guess is If its uploaded thrugh LSMW , then we can't change any value in the PO.
Please sugest how can I process allthese IDocs.
Thanks
Ajit

HT201210 In the middle of my update, it stopped and told me that it could not be completed due to an error. Then my computer restarted and it is telling me that I have to restore my phone so that the new version can be completed, and will erase my data an

In the middle of trying to update my iphone 4 to the new ios7 , it stopped and said it could not be completed due to an error. Then my computer restarted and it now tells me to restore to factory settings and I will lose all my media and data on my phone. What do I do, my phone is in recovery mode and cant be used??

You have no choice but to restore the phone.
However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right?

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

TABLE COULD NOT BE CHANGED DUE ERROR "GENERATED ALWAYS AS..."

Similar Messages

Maybe you are looking for