Table entry for table T710A and T710

Friends - Can anyone help me to understand what could be possible problem if i maintain PAY GRADE & PAY GRADE LEVEL entries through table. I have 57000 thousand entries for different countries so i am using BDC recroding to upload these values.
Please help me find out dependent tables on PAY GRADE & PAY GRADE LEVEL.
Kind regards,
Amit Jain

Hi:
T710:
MOLGA     - > T500L
SLTYP     - > T510A
SLREG     - > T510G
SLGRP     - > T710A
T710A:
MOLGA     - > T500L
SLTYP     - > T510A
SLREG     - > T510G
FREQU     - > T710F
WAERS     - > TCURC
WGTYP     - > T52D7
Hope it helps,
Regards.

Similar Messages

Table entries for Personnel administration and organisation management

Hi ,
For a functional consultant do we need to remember the table entries where the employee infotypes saved or where the table entries is useful as far as Personnel administration and organisation management is concerned.....
and one more thing how to create a custom Infotype (employee) detail documentation required ...
keep me posted
Thanks

hi,
it is really helpful if you rember the table name which holds the information about the infotypes
table starting with PA contains all the personnel information data
like PA0001 holds the information of infoty0001
similary you can check for other info types
and hr haster table like HRP1000 or HRP1001 hold all the other hr objects including your personnel objects as well as organizational related objects
infotype numbers
Four digit number nnnn
Unique identification
9000 to 9999 reserved for customer infotypes
naming convention
0000 to 0999 HR Master data / Applicant data
1000 to 1999 Organizational Management
2000 to 2999 Time data
4000 to 4999 Applicant data
9000 to 9999 Customer defined
defination of infotypes
Each infotype nnnn requires at least two structures and one table:
Structure PSnnnn
 Structure PSnnnn contains all of the infotype data fields.
Structure Pnnnn
 Structure Pnnnn contains infotype key fields and all of the data fields
from structure PSnnnn .
Transparent table PAnnnn and/or transparent table PBnnnn
infotype module pool
A module pool should be used with each infotype. This module pool is the main program for the maintenance interface for the info type.
The name of the program is MPnnnn00. Where P stands for Human Resources (personnel) and nnnn is the four-digit info type number.
Transparent table PAnnnn is required if you want to use an infotype within Personnel Administration.
 If you want to use an infotype within Recruitment, transparent table PBnnnn is required.
In accordance with the distribution of infotype name ranges, objects P9nnn , PS9nnn , PA9nnn and PB9nnn are assigned to the customer name range.
infotype screen
An initial screen
A single screen
A list screen
Initial screen is used as technical interface
Screen 1000 is used for all info types
Processed in background and not displayed
Performs general initialization procedures
A single screen
Its an interface between the system and the user.
It enables to create, display or maintain data records.
Screen 2000 is used for single screen.
list screen
Unable to list all records in info type
Screen 3000 is used for list screen
infotype time constrains
A time constraint indicates whether more than one infotype record may be available at one time. The following time constraint indicators are permissible:
A Only one record may exist, valid from 01/01/1800 to 12/31/9999. Splitting and deletion is not permissible.
B Only one record may exist, valid from 01/01/1800 to 12/31/9999. Splitting is not permissible, but may be deleted.
T The time constraint varies depending on the subtype.
Z Refers to time management infotypes.

to create infotype
Transaction code
PM01.
enhancing PA infotype
Start the Personnel Administration info type copier (PM01)
Enter the info type number.
Choose Enhance info type.
Start transaction PM01
You access the Create Info type screen:
Choose Enhance Info types.
In the Info type no. field, enter the four-digit number of the info type you want to create. When you specify the info type number, please remember to enter any leading zeros.
In the Sub-Objects group box, flag CI Include.
Choose Create. The Dictionary: Initial Screen is displayed.
Create the Cl include.
Choose Activate.
Return to the Create Info type screen.
Choose Create All.
hope this information will help you..
and don't forget to reward points

How to validate table entries for that table

i hav created one ztable se11.how to validate table entries for that table

hi,
create foreign key relation ships
do the following way
create a check table with key fields the fields which you want to check
create a foreign key relations with that table
the procedure is as follows
To create your check table:
Begin at the Dictionary: Initial Screen.
Type the table name in the Object Name field.
Choose the Tables radio button.
Press the Create button. The Dictionary: Table/Structure: Change Fields screen is displayed.
Type a short text, choose delivery class A, and tickmark Tab. Maint. Allowed.
Type the field and data element names at the bottom of the screen.
Tickmark both fields to indicate that they both form the primary key
Press the Save button on the Standard toolbar. The Create Object Catalog Entry screen appears.
Press the Local Object button. You are returned to the Dictionary: Table/Structure: Change Fields screen
Press the Technical Settings button on the Application toolbar. The ABAP/4 Dictionary: Maintain Technical Settings screen is displayed.
In the Data Class field, enter APPL0 (APPL0 with a zero, not APPLO with an alphabetic O).
Enter 0 (zero) in the Size Category field.
Press the Save button.
Press the Back button. You are returned to the Dictionary: Table/Structure: Change Fields screen.
Press the Activate button on the Application toolbar. The message "was activated" appears in the status
bar and the Status field contains the value Act..
Choose the menu path Utilities->Create Entries to enter data into your newly created check table. Enter six rows with land1 values of US, CA, DE, IT, JP, and AU.
Foreign Key Creation Procedure
To create a foreign key:
Begin at the Dictionary: Initial Screen.
In the Object Name field, type the name of the table that is to contain the foreign key .
Choose the Tables radio button.
Press the Change button. The Dictionary: Table/Structure: Change Fields screen is displayed.
Position your cursor on the field that is to become the foreign key
Press the Foreign Keys button on the Application toolbar. The Create Foreign Key screen will be displayed
Type a description of the foreign key in the Short Text field, for example, Country Code validation.
Type the name of the check table (-t005) in the Check Table field, or click on the down-arrow and choose it from the list.
The Change Foreign Key pop-up appears. It states Check table name was created or changed. Generate a proposal for field assignment? Press the Yes button.
You are returned to the Create Foreign Key screen. The check table field names and the foreign key field names are displayed. (The check table field names are -t005-mandt and -t005-land1. The foreign key field names are -lfa1-mandt and -lfa1-land1).
Press the Copy button. You are returned to the Dictionary: Table/Structure: Change Fields screen and the message "Foreign key was transferred" appears in the status bar. The Status fields contain the values Revised and Not saved.
Press the Activate button on the Application toolbar. The message "was activated" appears in the status bar. The values in the Status fields are now Act. and Saved.
reward if helpful
prasanth

How to Generate Audit table entries for user navigation in ADF application?

Hi all,
I have a requirement that I need to have audit table entries for each user action in my application. Along with entries for user actions like insertion,deletion and updation I also need to have entries in the audit log even when a user simply navigates to or views any page.
Although I was successful in creating the entries for user actions like insertion,deletion and updation I failed to do so for simple user navigation through the pages.
Can anyone please help me out?
Thanks in advance,
Arijit

Hi,
Thanks for the quick reply. I am using JSF for my ADF application.Could u please elaborate how to use the PhaseListener for Auditing user navigation?
Arijit

Logical system entry for table entry

Hi,
After system copy from one system name to another , I am facing some inconsistenices in various tables.
The table entry can be seen in se16.But when I try to select entries from the same table using SELECT statement, table are not getting populated.
I ran the BDLS also . How do I check the logical system entried for table where I have inconsistent entries?
Thanks,
Chitta

Hello Chitta,
But when I try to select entries from the same table using SELECT statement, table are not getting populated.
what are you trying to populate?
If your question is, its not showing anything... what error message you're getting? are you trying to run in the DB level?
If you're getting error, that this object doesn't exist in the database then you might not be logging with correct user. its an SAP table, then its owner is the SAP schema user. If you login with the schema user, it should show in a normal select statement. But if you login with <sid>adm then you have to give the correct schema id before tablename.
select * from <SchemaID>.<tablename>
SchemaID may be sapr3, sapsr3, or sap<SID> depending on your release.
Regards,
Debasis.

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

Which are R/3 table used for Infocube 0FITV_C01 and 0FITV_C01

How to find which are the R/3 tables used for Infocube 0FITV_C01 and 0FITV_C01
Thanks and regards,
Ranjan

Hi Ravi,
Please check this link:
http://help.sap.com/saphelp_nw04/helpdata/EN/05/5ae8375ae64014e10000009b38f8cf/frameset.htm
I hope it will help u.
thanks and regards
Venkata Naidu Bandi

Marking Z table entry for Deletion

Hi All,
Based on some condition in my program,
I am entrying one entry in Custom Z table.
Also for some other condition,
I need to mark the Table entry for deletion only, but it should not Delete.
So pls guide me for:
1) How to make Custom table entry as Mark for Deletion?
2) When I put Select Query on table, how can I write that do not Select those
Records which are marked for Deletion ?
Rishi

Hi Rishi,
Create a new field of type 'CDXFELD' (Data Type) in the Custom Z table. Now populate that new field with 'X' if it is marked for deletion. Then you can select all those entries which that field 'CDXFELD' = Space.
i.e., if the field 'CDXFELD' = 'X' then it is marked for deletion else not.
Select *
from Zcustom talbe
in to IT_TAB
where CDXFELD = space.
Hope this will help..
Regards,
Ravi..

Find table reference for field FAEDT and ZINSZ

Hi all,
can anybody tell me the table name for field FAEDT and ZINSZ
Thks
Shailesh

Hi,
Try in this table J_3RFTAX_EXTRD
34th FAEDT and 88th ZINSZ
Regards
Bala Krishna

Error in creating Table Maintenance for TABLES: J_2IRG1BAL ,Dump error show

Dear Gurus
I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No. Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
*Dump Error Shows in Production*
Runtime Errors SYNTAX_ERROR
Date and Time 11.12.2008 09:26:30
What happened?
| Error in ABAP application program.
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
rigger Location of Runtime Error |
Program SAPLSVIM
Include LSVIMU01
Row 107
Module type (FUNCTION)
| Module Name VIEW_MAINTENANCE
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
105
Initialisierung des Abgleichsmandanten zum View *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
| 110| USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.

I have send you all the details regarding the table maintenance generator
error is shown below
 I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No. Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
 Runtime Errors SYNTAX_ERROR
Date and Time 11.12.2008 09:26:30
ShrtText
Syntax error in program "SAPLJ1I5 ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Trigger Location of Runtime Error
Program SAPLSVIM
Include LSVIMU01
Row 107
Module type (FUNCTION)
Module Name VIEW_MAINTENANCE
Source Code Extract
Line
SourceCde
77
TRANSPORTING NO FIELDS.
78
IF sy-subrc NE 0.
79
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
80
IF sy-subrc NE 0.
81
RAISE no_editor_function.
82
ELSE.
83
length = strlen( function_name1 ).
84
ASSIGN function_name1(length) TO <function_name>.
85
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
86
IF sy-subrc NE 0.
87
RAISE no_database_function.
88
ENDIF.
89
ENDIF.
90
INSERT x_header-viewname INTO alr_checked_views INDEX sy-tabix.
91
ELSE.
92
length = strlen( function_name1 ).
93
ASSIGN function_name1(length) TO <function_name>.
94
ENDIF.
95
96
Initialisierung der RFC-Destination zum View *
97
98
FPOOL+4 = X_HEADER-AREA.
99
fpool = x_header-fpoolname.
100
vim_default_rfc_dest-viewname = x_header-viewname.
101
vim_default_rfc_dest-rfcdest = rfc_destination_for_upgrade.
102
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
103
USING 'VIM_DEFAULT_RFC_DEST' 'C' vim_default_rfc_dest rc.
104
105
Initialisierung des Abgleichsmandanten zum View *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
110
USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.
111
112
set flag if complex selection conditions in sellist *
113
114
IF complex_selconds_used NE space.
115
READ TABLE dba_sellist INDEX 1.
116
IF sy-subrc EQ 0 AND dba_sellist-cond_kind EQ space.
117
dba_sellist-cond_kind = 'C'. MODIFY dba_sellist INDEX 1.
118
ENDIF.
119
ENDIF.
120
121
direkter Vergleich: Flagge setzen usw. *
122
123
IF view_action EQ vim_direct_upgrade.
124
view_action = aendern.
125
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
126
USING 'VIM_SPECIAL_MODE' 'C' vim_direct_upgrade rc.

T710a And T710 Upload

I have written a program to populate the tables T710A and T710
Everyything works fine but when the data is populated there is a currency key that should populate in T710 A and the same field is the header in the T710 table. Even that does not Populate.
Any Suggestions.

Hi,
Goto Transaction Code: SM34. Give View cluster V_T710CL or V_T710CL_B & click on Maintain button.
Hope this helps.
Thanks,
Sarika.

Transaction code for Table Maitainence for table

Hi all,
i have created Table Maintainece for Table and also i need to create transaction code
for table maintainence.
there when i create transaction code with TRANSACTION with PARAMETERS and SKIP FIRST SCREEN.
I can see all the records in the table into table Maintainence.
Is ther is any possibility like i can restrict records on the key fields (like selection screen).
Will anybody let me know how to goahead with this requirement.
Regards,
Madhavi

You can build a small report that call the maintenance view. In the report, convert the SELECT-OPTIONS input to the [DBA_SELLIST|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=dba_sellist&adv=false&sortby=cm_rnd_rankvalue] parameter of function module [VIEW_MAINTENANCE_CALL|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=view_maintenance_call&adv=false&sortby=cm_rnd_rankvalue].
If you have "pertinent" key to filter the data, you may define these as sub-key in a mainetance view, those fields will be asked for when entering the maintanance dialog. Or you can build a [view cluster|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=se55&adv=false&sortby=cm_rnd_rankvalue] using these sub-set keys.
Regards

How to gather table stats for tables in a different schema

Hi All,
I have a table present in one schema and I want to gather stats for the table in a different schema.
I gave GRANT ALL ON SCHEMA1.T1 TO SCHEMA2;
And when I tried to execute the command to gather stats using
DBMS_STATS.GATHER_TABLE_STATS (OWNNAME=>'SCHMEA1',TABNAME=>'T1');
The function is failing.
Is there any way we can gather table stats for tables in one schema in an another schema.
Thanks,
MK.

You need to grant analyze any to schema2.
SY.

No database table exists for table

HI All,
We created a Ztable and used in two of reports these reports woking fine in PRD,few days back we assigned authorization group and functional group to these table now this table throwing eeror in QAS as well as PRD like No database table exists for table ZXXX,client dont want the data in this table so we deleted this table and created with same name to QAS still same error we are unbale to findout the problem.pls any on help me out..

Hi Srinivas,
I am also facing similar kind of issue, can you please let me know your approach towards resolving the issue without deleting the existing data from the table.
Thanks in advance.
Best Regards,
Anil Neegineni

How I could transport table entries from table NRIV

Does anyone knows how I could transport table entries from table NRIV.
I can mark them in se16 but the "table entries"->"transport" is grey. What shouuld be done.
Is there another way to transport NRIV entries.
Thank you in advance

Hi,
Goto SE01 -> Create Transport Request.
Assign the Workbench request/Project.
Single click the TR. Click on the DISPLAY OBJECT LIST or Press SHIFT + F11.
Click on CHANGE -> Insert.
PgmID Obj Object name
R3TR TABU NRIV
CLick Extras -> Change Object Function -> All entries.
Save.
Release the Tr.
Best regards,
Prashant

Table entry for table T710A and T710

Similar Messages

Maybe you are looking for