Table entry in production asking to create a transport number

Hello,
I have created on transparent table with delivery class A and data class DATA0. created its table maintenance and created a tcode of that. and moved all this to production.
Now, when I am creating entries in that table through tcode, its asking me to create a transport number.
What is the problem?
thanks and regards,
Madhuri Sonawane

Hi
This is bit strange since when I check the settings in my systems I am able to maintain in production without any transport number.
Just check in SCC4 of your production
client role - Production
No changes allowed
Last chance is to try to change the delivery class as 'C' and then check in Q. Also if possible change the client settings in SCC4 of you Q as in P and try.
Regards,
Vijay V

Similar Messages

Change table entries in production

Is it possible to have authorizations so that specific users can change table entries through se16 in production even though the system is locked for changes?
Thanks,
- Prakash

You will need to create the Maintenance view for the table you want to maintain and then make a authorization group using se54 for this maintenace view. This authorization group needs to be defined in the role of the persons to whom you want to give acess. Now only these persons can maintain this table entries.
Award points.
Thanks,
Barjinder Singh.

What to copy table entries from production to test

Hello!
After production client copying to TSTclient NNN the table Z* (concerned PA2001) was not copied completely...
How could I transfer Z* table entries to TSTNNN?
Via SCC8?
Is pa2001 also need to be copy?
Regards,
Tonya

Refer to
[http://searchsap.techtarget.com/tip/0,289483,sid21_gci959527,00.html]

Problem transporting table entries

Hi,
I need to transport my table entries frm development to test and production. However, even if i us standard recording routine in the table maintenance and then create entries ant transport, it doesnt work.
Also, is there an option to do it directly from SE11? Do i need admin rights?
Regards

Hi,
Table entries can be included in a transport request and can be transported .
For including the table entries in a request,Follow the below mentioned procedure.
Hi,
Table entries can be forcefully included in a transport request and can be transported to the required system.
For including the table entries in a request,Follow the below mentioned procedure.
but the data will be stored under workbench request
1.create a workbunch request in se01.
2.Double click on the request no.
3.Select the object tab in the new screen appeared.
4.Go for change mode (Ctrl+F1)
5.Select the Program id as R3TR and Object Type as TABU.
6.Give the Object name as Table name(ZTABLE)
7.Click on the function button on that row.
Give * in that editor appeared and save this.
Now all the table entries are binded in that request and can be transported across the server.
instead if you are putting on the user recordin on in TMG it will ask for a request each time you save some entries in the table.

Reg Table Entries

HI,
I have created a table with two fields, When I went to utilities - table entry, I could display and create entires.But the problem is Create entry is not highlighted..How Should I enter values in the table which i created..
I appreciate your help..
Thanks
kisu

Hi,
Transaction / path :
SE11 - Utilities - Table maint. generator
look here
http://help.sap.com/saphelp_47x200/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
Andreas

How to create internal table dynamically based on a table entry

hi Experts,
I have table yprod_cat. It has product categories.
In my ABAP program I need to create internal table dynamically based on the number of entries in the table.
For example:
If the table has 3 entries for product category
1. Board
2. Micro
3. Syst
Then create three (3) internal tables.
i_board
i_micro
i_syst
How can we do this? Any sample code will be very usefull
Thanks & Regards
Gopal
Moderator Message: No sample codes can be given. Please search for them or work it!
Edited by: kishan P on Jan 19, 2011 4:22 PM

Our APEX version is 4.2We are using below SQL query to display radio groups dynamically..
SELECT APEX_ITEM.RADIOGROUP (1,deptno,'20',dname) dt
FROM dept
ORDER BY 1;
Created a form using SQL type and given abouve SQL query as source.. But when we run the page, there were no radio groups displayed in the page..
Below is the output of the query..
<input type="radio" name="f01" value="10" />ACCOUNTING
<input type="radio" name="f01" value="20" checked="checked" />RESEARCH
<input type="radio" name="f01" value="30" />SALES
<input type="radio" name="f01" value="40" />OPERATIONS
>
If Tabular Form:
Edit Region > Report Attributes > Edit Column > Change the Column type to "Standard Report Column"
If normal Page Item:
Edit Page Item > Security > Escape special characters=No.
Pl read the help on that page item to understand the security risk associated with =NO.
Cheers,
Edited by: Prabodh on Dec 3, 2012 5:59 PM

Unable to create entry under Product Specific Transportation Lane by BAPI Function Module

I am developing one RFC function module which will trigger BAPI_TRLSRVAPS_SAVEMULTI2 to create transportation lane (/n/SAPAPO/SCC_TL1) in APO. But I am facing one problem while creating a new entry under “Product Specific Transportation Lane”. But I am not able to pass ‘Group Selection’ radio button field in BAPI11201TRPRODLANE2 structure since I am not getting suitable field, but Product Group Type and Product Group value I am able to pass. Can anyone help me if you have any idea on this?

Hi Siva,
Thaks for those function modules. I tried with '/SAPAPO/TR_TRPRODM_PUT'. This deletes from table /SAPAPO/TRPRODM but not from /SAPAPO/TRM and so the means of transport still appears in the transaction. Do you have any idea why it behaves this way.
Thanks

Maintaining Table Entries directly in production

Hi All,
I have created a Z table. This table has been moved to production. Currently table entries are transported to production from development client. But this table regularly gets changed and so this needs to be maintained day to day basis. As per the policies transport request to production is moved only at specific times. Client in the production is not modifiable (Closed Client where no change authorization). To maintain the entries in the table every time client in the production should be opened.
Can you please let me know is there any way we can maintain the entries without opening the client for changes and without moving the entries with the transport request? Is there any other way to maintain the entries?
Thanks in Advance,
Shravan G.
Moderator message: please use more descriptive subject lines from now on, changed for you this time.
Edited by: Thomas Zloch on Nov 30, 2010 2:26 PM

Dear,
Create a maintainence view on that Z table. In that Maintainence table select Maint status->Delivery class-> select "Customizing" option. If any one creates new entry in Dev, system popsup for a TR. Those new entries will be saved in to TR. You can transport that TR across landscape.
The above one general practice for customization.
If you dont want that, create a table maintainence dialog on that z table and hence create a tcode with SM30 from SE93 transaction code.
Go to SE93-> select transaction with parameter
                      Enter transaction SM30
                      check Skip initial screen
                      In default values maintain below:
                  VIEWNAME     Z table name
                  UPDATE     x
Using that tcode you can maintain values directly in production
Thanks and Regards,
Edited by: chandra madapati on Nov 30, 2010 6:17 AM

Custom table entries transportable / maintainable in production environment

Hi,
I have a custom table with table maintenance generator (automatic transport of table entries). I would also like to maintain the table entires in the production environment (i.e. using SM30 transaction, rather than transporting the entries from Quality). I hope there is a cofiguration to do this.
Could any one help me on this.
Thanks in advance.

Adding to what others have suggested, it is not advisable to give SM30 access to your users. Its better to create a parameter transaction for the maintainance dialog and give the user access to that transaction. Other way of restricting the access is using authorization group selection while creation of maintainance dialog (&NC& will give access to every one). Check the below link to see how to create a parameter transaction for sm30.
[Parameter transaction for sm30|http://www.divulgesap.com/blog.php?p=MTg=]
Cheers,
Ravikiran

Deletion of table entries(without maintenance view) in production

Hi Sap All.
here i have got a task to change the data type of one particular field and to delete all the table entries of this table in production.
so in Dev I have tired with z program saved in local object (DELETE FROM Table).
i just want to know how i can delete all the entries of table in production.
regards.
Varma

Hello,
You can also use transaction SE14.
Start SE14
Enter the table name
Select the radio button "Delete data".
Push the button "Activate and adjust database".
This will drop your table in the DB and recreate it as well as all related indexes.
Indexes are not impacted when you do a regular DELETE statement unless you rebuild your indexes.
Of course you can only do this if data can be deleted for a specific table in ALL clients.
Wim

Creating entries in a Table at runtime and attaching it to a Transport

Hi,
I need to create an entry in a database table through my program and at the same time I have to attach the same in a transport request. The Table is client independent.
I am able to create a transport using BAPI_CTREQUEST_CREATE. But does not know how to add the table entry to it.
Please help.
Regards,
Himanshu

Hello,
is it a standard table ? A z* table ?
How do you update this table: by INSERT/MODIFY abap instructions ? By batch-input ? Something else ?
Cordialement,
Chaouki.

Creating Table entries

Hi,
While attempting to create a table entry I am getting a runtime error.
Short text
    Syntx error or generation error in a screen.
What happened?
    At the screen generation it was detected that a screen to be generated
    has a syntax error or could not be generated due to another error.
Error analysis
    Screen "SAPLZSCMS_REGION" 0001 could not be generated.
Trigger Location of Runtime Error
    Program                                 SAPLZSCMS_REGION
    Include                                 LSVIMF45
    Row                                     219
    Module type                             (FORM)
    Module Name                             INITIALISIEREN
Please let me know why this occurs and how can I go about resolving it?
Thanks
Vineeta

Hi all, Thanks for your replies.
As Anil pointed out I was encountering this problem because, I added a fiels into the table and didnt recreate the maintenance generator.
Thanks,
Vineeta

How to create PMCO table entries for few PM Order

Hi Experts
By a lack of Customizing we have used for few day a PM order type without the flelds AFKO-KLVARP and AFKO-KLVARI set.
For this missing setting no entris had been created during Creation and Confirmation in PMCO and PMCOQT tables.
Now I've filled teh fields with a Zreport on AFKO table, but now I need to create the PMCO* data using RIPMCO00 report.
Unfortunately it doesn't work. Is there a way to re-build this missing datas ???
Thanks for your help.
Claudio
Edited by: Claudio Carrara on Feb 15, 2012 3:48 PM

Run the program RIPMCO00, has no effect because tables PMCO and PMCOQT are empty for these order.
This hapepns becuase when the Order was confirmed, teh fields AFKO-KLVARP and AFKO-KLVARI was null.
Now I've fixed these fiels, and I need to rebuild PMCO datas, burt report doesn't work because PMCO and PMCOQT tables are empty.
I need to create PMCO and PMCOQT entries in advance.
How I can proceed ???
Thanks
Claudio

Auth. obj. controlling options Create - Change of Table Entry for SE11

Hello,
Could someone please guide me to the authorization object/s which controls the options : Create - Change reached by trans. code SE11, Change, Contents (Ctrl + Shift + F10) , Execute (F8), Table Entry, Create - Change.
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

Hi,
when you execute SE11 authorization object S_DEVELOP was check.
S_DEVELOP has following nodes.
Activity : create,change,display
Package : z,y
Object name : z,y
Object type : type of object i.e domain,table, index etc.
Authorization group ABAP/4 pro : *
now suppose you want to give user authorization for display only then
Activity should have value 03 only.
in future please post your authorization related thread in security forum.
Security
regards,
kaushal

Creating Transport Request No for TVARVC Table Entries?

Hi Guys,
Can anybody tell me how to Create Transport Request Number for Multiple TVARVC Table Entries?
Thanks,
Gopi.

You can do it yourself, no need to waste any Basis time.
Go to transaction STVARV -> Maintain mode. Before you create a new entry or change an existing entry tick the checkbox at the top of the screen labeled "Include changed entries in transport request". Then select the row which you want to transport and create/change the values, then hit 'Save'. You'll see the system will pop-up a change request dialog box where you can now save your entries.
Hope this helps.
Cheers,
Sougata.

Table entry in production asking to create a transport number

Similar Messages

Maybe you are looking for