Table for Address maintained for Org Unit in PPOMA_CRM

Hello,
Is anybody aware of the table which stores the address of the Sales Org unit maintained in PPOMA_CRM..Quick replies are appreciated..

Hi,
See the table:HRP1028.
Regards,
Masayuki

Similar Messages

Table for Cost Centers and Org Units

Hi All,
How to retrieve the list of Cost centers and the associated Organization Units?
My HR user is in need of such list...
Can anyone help me out....????
Regards
Pavan

Hi
I dont think you can associate a cost center with org unit, it is normally associated with position/person.
You can check table PA0001 to get the cost center and org unit for a personnel number.
Is this your requirement ?
Thanks,
Shrinivas

Segment Builder: Attribute "E-mail address maintained" for private accounts

Hello,
in CRM Marketing you have the possibility to segment on the attribute "E-mail address maintained". This attribute is part of the standard infoset CRM_MKTTG_BP_ADDR. This attribute checks if field FLAGCOMM6 in table ADRC is flagged. This field is marked when an e-mail adress is maintained for corporate accounts. Anyway, this flag ist not set, if the e-mail address for private accounts is maintained.
Why is this flag only set for corprate accounts and what do I have to do if I also want to have an attribute in segmentation to check if an e-mail address is maintained for a private account.
Thanks for your help.
Regards
Miriam

Hello Miriam,
if you want to check the email address (private acccount), you can't use the standard infoset CRM_MKTTG_BP_ADDR, because this infoset include the tables but000, but020 and adrc.
You need the table but051 there is a attribute SMTP_ADDRESS. After you created a infoset with this table you can create a filter with this attribute SMTP_ADDRESS, which check if the field is empty.
Best regards, Jasmin

Dealing of address change of org. units

Here I am putting my question again. If we define the org. units like Plant,Sales org. ,Company code etc. and then change their address,the address changes in the previous documents also.
Are there any settings through which we can let the old address in the previous documents be the same and at the same time can create new documents with new address.

If we define the org. units like Plant,Sales org. ,Company code etc. and then change their address, the address changes in the previous documents also.
I am not sure if that's a bug or a feature.
If you consider it is a bug, maybe you should consider some kind of Archiving system so you keep a copy of the original invoice "as-is".
Imagine you change a SAPSCRIPT or SMARFORM and you need to re-print the invoice. Not only the address will change, but also the format of the printed billing document itself!
An Archiving system would solve this problem because it would allow you to re-print exactly the same invoice that was printed months ago.
Best Regards,
Franck

2 different sales org. for single plant and org.unit, can we?

hi,
we have this requirement to hava a 2 different sales org. for one single plant and one organization unit. is it possible just by assigning in spro path,
spro-> CRM->master data->cross system assignment of organization units <-|
-> assign plant and storage location to service organization unit.
when we change the stor.location it gives us the error message -
target key must be different from source key.
can any one please help me in this.
thanking you.
Ahmed.
=======

Hello BJ,
I am talking about Intercompany sale - configuration where i should be able to sale from diff,Sales org ( of diff company code ) from one single plant ( of diff. company code )
please refere my first mail on posting this issue to understand the requirement.
Thanks for further advise.
Nitin

Standard reporting for personnel areas per org. unit

Hi all
An HR colleague asked me for a tool to display a selected organisational unit and then show what personnel area it belongs to. They are cleaning up our master data and need this kind of cross checking but I cannot come up with any list to show this.
How would you do it? Do I have to build a query for it or is there an easier way?
Regards
Jesper

Hi
Try this out
Step1.s_ph0_48000510 adhoc qurey or pqah
Step2.Go to org assignment folder
Step3.Select organizational unit for output
step4.Select personnel area for selection
Give input for Personnel area
and Execute Output
you get the results of orgunits belongs to given personnel area
all the best
partha
keep sharing andlearning

Table for link with BP and Org Unit

Hi experts
i'd like to know what is the table where there is inside the link beetween BP and Org Unit.
I know that the table HRP1001 links users to Org Unit but i cannot find the BP
regards
andrea

Hi
you can always find the link between Org unit O and its related BP in table HRP1001.
Key in Org unit ID in the table selection parameter OBJID and execute. It will list postions (S) assigned to the Org ID and its BP number. Look at the relation B207(subtype) which will show O-BP assigment. It will be the last entry in the output list.
R/Reddy.

Retrieving Positions for Specific Org Units

Hi All,
I have a headcount report to develop. It will run for one personnel area at a time. So for the period run, I have to list out all the org units under the personnel area as well as the sub org units. For each of the org units I have to separate positions under them into two group - total of positions with holders and non-holders.
I am using the function RH_STRUC_GET by passing org unit to retrieve positions. May I know which result table to read in order to get positions and how to segregate them into 'With Holders' and 'Non-Holders'?
And also how to get the relation ship between org units because I need to display that in the report also.
Thank you in advance
Regards,
Lily

Hi..
Existing Organizational Units (Report RHXEXI00)
Staff Functions for Organizational Units (Report RHXSTAB0)
Organizational Structure with Persons (Report RHXSTR02)
Periods for Unoccupied Positions (Report RHFILLPOS)
Existing Positions (Report RHXEXI03)
Staff Assignments (Report RHSBES00)
Position Description (Report RHXDESC1)
Staff Functions for Positions (Report RHXSTAB1)
Vacant Positions (Report RHVOPOS0)
Obsolete Positions (Report RHVOPOS1)
Complete Position Description (Report RHXSCRP1)
Reporting Structure without Persons (Report RHSTR05)
Reporting Structure with Persons (Report RHSTR04)
Activity Profile of Positions (Report RHXSTR07)
Activity Profile of Positions with Persons (Report RHXSTR08)
Existing Objects (Report RHEXIST0)
Structure Display/Maintenance (RHSTRU00)
Reporting on an Infotype (Report RHINFAW0)
Starting an HR Report (Report RHPNPSUB)

Remove Actions for Org Unit & Positiin in Succession Planning.

Hi,
We are in process of implementing Nakisa 3.0 SP1.
In succession planning, we want to remove few actions for org units & position. I tried to look for the configuration of the same in admin console in detailed configuration for my positions & my org units, but could not find it. Please help.
Thanks
Prashant

Hi Prashant,
Do you mean the items in the Actions drop-down menu on the OrgUnit/Positions details panels? This cannot be done in the AdminConsole. You need to go to the <build>\AppResource\linkconfiguration folder and copy the files you want to change to <build>\.detla\AppResource\linkconfiguration folder and then change them.
I believe the files you want are SAPOrgUnitDetailsConfiguration.xml and SAPPositionDetailsConfiguration.xml. Just delete or comment out the lines for the actions you want to remove.
Best regards,
Luke

HCM-ORG MANAGMENT Config error, in creation of Org Units.

Hi Experts,
I am trying to configure the HCM-Organization Management in ECC 6.0, When I try to maintain an Org Unit, the system prompts with an Information Message as stated below, since it was an information message, i continued creating the Org Unit, but when I am trying to save the entry, Now system shows me the same message and doesnt allow me save the entry and prompts me with same message...
No evaluation path specified for structural evaluation
Message no. 5A249
Diagnosis
You want to start structural reporting, but you have not specified an evaluation path according to table T778A.
Can any of you help me in this regard.
Best Regards,
KishoreJ.

Hi Amosha,
When i try to do it through the expert mode..The following error shows in the task bar
For infotype 1000 in status 4, function INSE is not allowed
Message no. 5A043
Best Regards,
KishoreJ.

BADI or Enhancement Spot while assigning BP to a Org Unit

Hi,
I have a requirement of changing the BP address while assigning the BP to a Org Unit in PPOMA_CRM. Is there any BADI or Enhancement Spot which can be used for this purpose.
Thanks,
Ravi G

Hi Ravi
Regarding this thread I want a help from your side if you can help me please.
I have to put some validation for the assigned employee and the position under which the employee is beeing assigned.
Is there any badi or Enhancement spot that can resolve my problem.
the validation will be done as soon as we select the employee that will be assigned to the position and press the ENTER.
It is done before SAVE.
Best Regards
Saurabh

Cost center and Org unit relationship.

Hi Guys,
I need quick help from any one of you.
Actually our org stucture is like Root-> company->plants-> costcenters( deparments)- users.
so we create org unit in the structure with some 100001 and assign users for that cost center org unit , so by doing this costcenter attribute =100001will be inherited from the cost center org unit to all the users under that org unit.
but now there is a requirement for creation 1500 users and we have many such costcenter org units in the structure.
The business will provide the cost center I need to identify the org unit for that cost center in the structure then only I can assign a set of users for that 100001 costcenter. But to do that I have lots of such cost center org units.
So if there is a any table or report available in the system where I can get the details of the description ( meaning Basic data descrition) which we enter while the while creating the org unit and the Org unit number which gets generated when we save.
I would like to search for that relation .Please help me with this information.
Regards
SrujanK

Hi
I am not clear what you are asking
http://wiki.sdn.sap.com/wiki/display/SRM/DownloadExtract-Graphicaloverviewof+PurchasingOrgstructureinSAPSRM
BBP_READ_ATTRIBUTES
I/P ORG ID 5000
USER:- SRUJAN
ITR_ATTR_LIST = CNT
O/P
et_attr
YOU MAY GET LIST HOW MANY COST CENTER YOU HAVE inherited
upload cost center sap given std report to upload
B_UPLOAD_COST_CENTER_ATTRIBUTE
br
muthu

Teamviewer - All positions in Org Unit display depth between EP5 and EP6

We are in the process of upgrading our HR Portal from Version 5 to Version 6 (SP14) and have encountered an issue with the Team viewer functionality.
In our EP5 system when the user selects the dropdown option for 'All positions in org unit' it is picking up our Configuration limiting it to showing only 3 structure levels and when an attempt is made to display lower levels the expander changes but no more levels are shown (e.g. Expander icon changes but does not render the lower level).
In our EP6 system when the user selects the dropdown option for 'All positions in org unit' it is ignoring the same Configuration and lets the user select down to the bottom of the organisation. This will obviously have serious performance implications and so must be corrected if we are to implement this upgrade.
To test the situation we deployed the following par files from our EP5 system to our EP6 system and found that we achieved the required result of only allowing the configured levels to be shown:
com.sap,pct.hcm.objectanddatprovider.par
com.sap,pct.hcm.orgmanagementeventing.par
com.sap,pct.hcm.teamviewer.par
This points to an issue between these files from the EP5 version to the EP6 version.
Has anyone else experienced an issue with how the EP6 teamviewer handles the 'All positions in Org Unit' selection, and if so can you let me know any solution you have to it?
(Note: This selection used Eval Path MDTSBESX)
Message was edited by: Steve Caffrey

Hello Sandeep,
Unfortunately the only standard functionality is to change the rankings of the positions within transaction ppome. Therefore you have the buttons 'Move up in rank' and 'Move down in rank' in the overview area of the ppome. As you know if the field PRIOX in the table hrp1001 is empty, the transaction sorts the positions by OBJID. So perhaps you could create a abap program to change this standard functionality to insert values into field PRIOX for the corresponding relationship in HRP1001 that you want to sort.
Best Regards
Christine

PA and PSA Inheritance issue from Org Unit

Hi,
I am trying to create an Org Unit with effective from today or a future date. When I do this, PA and PSA is not getting inherited for the newly created Org Unit.
But when I create an Org Unit with effective from past date, this issue is not there and works fine perfectly.
Note: The issue is there in the Development Client as of now. But there is no issue in quality. There was a recent patch that gets updated in Dev system. Not sure whether patch is an issue.
Cheers
Vijay

hi vijay...
would you tell me about your problem in bit details...
i understand that if you create new org unit with existing org unit which already maintained with its PA and PSA assigned in Account Assignment tab then its never occur this problem..but if you create your org unit out side the remaining structure the you must assign PA and PSA for this specific
Regards
Bashir Ahmadani

Org unit not visible in the search

Hi All,
In the master data maintenance of the organization management , we have created an sales organization unit (O 50000XXX).
Function and attribute values for sales scenario has been maintained.
Object permitted in determination check box also checked.
while assigning the pricing procedure determination for the sales org (O 50000XXX) we are not able to find the sales org in the F4 search help.
When we are trying to key in it manually it is giving an error msg 'Sales Office O 50000XXX not available'.
Please suggest any inputs.
Thanks
Syam

Hi Krish,
Thanks for the update.
Org Data determination is working fine in the business transaction, we have maintained the Org data profile and respective determination rules.
Now we have created a new sales org unit in PPOMA_CRM.
we are trying to assign the pricing procedure to Sales area in GUI.
SPRO--Customer Relationship Management -- Basic Functions -- Pricing -- Pricing In Business Transaction.
In New entries , while searching the sales org. by F4 help.....the newly created sales org unit is not getting visible.
I tried of giving the object ID directly but the value is not getting accepted.
Thanks
Syam

Table for Address maintained for Org Unit in PPOMA_CRM

Similar Messages

Maybe you are looking for