Table for MRP results
Dear all,
Is there any table in which the results of MRP run are stored?
I want to pick up some of the data for a report.
Thank you,
Shrenik
Dear Shrenik,
check in these tables,
MDKP Header Data for MRP Document
MDTB MRP Table
MDVL Planning file entry for long-term planning
MDVM Entry in MRP File
PBVPV Material index for consumption of planning
PLAF Planned order
REUL Material stock transfer reservation index
SAFK Run Schedule Master Data
T024D MRP controllers
T436A Floats for scheduling
T437V Distribution key in MRP
T437W MRP distribution key (texts)
T438A MRP Type
T438S Text describing the range of coverage profile
T438T MRP description
T438X MRP group text
T439F Handling of planning flag at abnormal termination
T439L Warehouse costs for MRP lot size
T439T Texts for lot-sizing procedures
T440A Change fields for MRP
T440B Control table for creating MRP record
T440F Exception messages for the forecast
T440Z Allocate error -> error class in the forecast
T449A Period split
T449B Period split: language-dependent description
T450 MRP transaction control
T457A Processing key for planning run
T457C Transaction calls control
T457S Block table for MRP and forecast run
T457T Description of MRP elements
T458B Description of exception messages
T460A Special procurement key
T460B Special Procurement Key Conversion
T460C Order/Purchase order types for planned order
T460D Order/Purchase order types for planned order
T460T Texts for special procurement keys
T461P Planning strategy group
T461S Planning strategies
T461T Planning strategy text
T461X Planning strategy group text
Regards
Mangalraj.S
Similar Messages
-
Dear Expert,
I have question about SAP MM table.
I have material with MRP type is PD and lot size is EX, let say this material is X.
Then i create reservation from WO using material X. In MD04, we will see there is requirement for material X under that WO. Stock does not exist than MRP Run will create PR to fulfill this requirement.
But we do not know, this PR was trigeer by what WO.
I want to ask all of you, is there table for SAP to save this mapping.
So we can surely thougt that this PR came from this WO.
I just trying to trace, i found MDRS, but in this table, i am not found the PR number with specific.
Please let me know, if you have information
Appreciate for your help and Thank you
Regards,
SilviaHi Silvia,
In MD04, click on the PR & click on pegging info, you will be able to see which WO is calling this PR.
If you want to check for a lot of materials at a given time, then create a Z report & call the FM -> MD_PEGGING_NO_DIALOG
But note that the same PR / planned order can be pegged to many requirements depending on the MRP parameters maintained in the MRP views.
Hope the above answers your query.
Regards,
Vivek -
Internal table for the result area
hey
where do the result area data stored in after the search? is it in internal table??. If so is there any possibility of finding the internal table?
thanks in advanceHi Shailaja,
You can check as pointed by Vijay, which is at the Framework Level.
For Application Level (specific to your PCUI Appl), the QEURY method of your class (assigned to Search Area screen) returns the list of found object keys (based on the search query) to the READ method. The READ method now queries the backend, for the supplied object keys and stores all the result data in export parameter ET_SCREEN_SRTUCTURE.
Now the Framework with the help of One Order Interaction Layer, pumps the data to the Data Context Layer as pointed by Vijay.
So in order to do any data massaging, you can do it at internal table et_screen_structure.
But whatever changes you do in et_screen_structure, will not be commited to backend, without touching the MODIFY method.
Thanks
Harsh -
Tables for MRP requirements quantity.
Dear Experts,
I have requirements where in I want to know the table from which I will get the the material requirements quantity.
Example is as below;
I have given PIR through MD61 of "ABC" material as 100 qty.
After this through MD02 i will generate requirements which will appear in Stock Requirements list MD04.
If stock is available then accordingly it will create PR/Planned order.
Here my requirement is that i want to display pure requiremnets that is 100 qty irrespective of what stock is available.
In which table i will get this pure requiremts.
Please help.Hi,
Please check in table:
PBED - PIR items
MDKP
MDTB
Also you can use FM: MD_STOCK_REQUIREMENTS_LIST_API. Best is use this FM.
Regards,
Alok Tiwari
Edited by: Alok Kumar Tiwari on Dec 14, 2011 11:28 AM -
What is table for results field in results recording
Dear all,
Please tell me the table for the results in results recording .
Thanx in advance.
Regards
SrinivasHi,
QAMR Characteristic results during inspection processing
QASE Results table for the sample unit
QASR Sample results for inspection characteristics
Regards
Mangal -
MRP list out put tables for header and item -reg
Hi ,
What is the table to be used for MRP out put
header is MDKP
for item what is the table ?
regards,
madhu kiranDear,
Tthe MRP item data is stored in a data cluster. The database
table is MDTC, and the data cluster area is ar. Use the following command to
import the data from the data cluster:
Import <structure> from database mdtc(ar) ID <key>.
The ID key value comes from the field dtnum (Number of the material
requirements planning table) in table MDKP
MDKP MDTB MDKP
Please refer this also,
[Table for MRP item|table for MRP item]
Regards,
R.Brahmankar -
MRP Area tables for MD06 information access like SQ01, DBM logical database
We currently use SQ01 DBM logical database to access MD06 information (tables MDKP and MDTB). The MRP results from the MRP Area are not showing in this query. This implies that the MRP area, MRP results are stored in other tables.
I have reviewed tables (MDLV, MDMA, MDLG, DVER, MDIP) from a similiar thread. However, they do not contain the MRP data (planned orders, stock, production orders ect) like in the DBM logical database. This data access is very powerfull for exporting planning data for more robust analysis.
Any help is much appreciated.
Thank youHi,
Please try FM: 'AUFBAUEN_MDPSX_ANZEIGEN'.
MD06 dame come many table.
Example:
(Plant level)
icm61w-fabkl = wk_fabkl. :Factory calender
imt61d-matnr = p_matnr. : Materials
imt61d-werks = it_tbl-werks. : Plant
AUFBAUEN_MDPSX_ANZEIGEN 呼出
CALL FUNCTION 'AUFBAUEN_MDPSX_ANZEIGEN'
EXPORTING
ecm61w = icm61w
ecm61x = icm61x
emt61d = imt61d
et399d = it399d
ECM61B =
ESFILT =
IMPORTING
icm61m = wa_e_cm61m
imdkp = wa_e_mdkp
imdsta = wa_e_mdsta
TABLES
mdpsx = it_mdps
regards,
Gaito -
Database Table where MRP Run results are saved-Urgent
Hi Gurus
i need your help in identifying the database table where the MRP Run results are saved , this is needed for creating a custom report similar to MD45(but for entire plant) where i can look and pull the sum of all the receipts and issues, ATP Quantity for a given material in a particular plant
and ignore zero quantities in the receipts and issues field
i tried in <b>MDTB</b> table, MDTB-MNG01 Quantity received or quantity required but it has no entries maintained in it and so it cannot be used.
So can you please help me with the table where i can get this information asap
thank you very much for your time and solutionPlease use the code below which will help you in extracting data from MRP table.
You can enhance this program basing on your requirement.
*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
A sample program to extract data from the MRP table.
*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
REPORT ZMRPTABLE.
TABLES: MDKP, "Header Data for MRP Document
MDTB, "MRP table
MDTC, "Aggregated MRP table items
T457T. "Description of MRP elements
DATA: BEGIN OF MDTBX OCCURS 0.
INCLUDE STRUCTURE MDTB.
DATA: END OF MDTBX.
SELECT-OPTIONS: PLANT FOR MDKP-PLWRK OBLIGATORY,
MATNR FOR MDKP-MATNR OBLIGATORY.
CLEAR: MDKP, MDTB.
SELECT * FROM MDKP WHERE DTART EQ 'MD'
AND MATNR IN MATNR
AND PLWRK IN PLANT.
WRITE:/ MDKP-MATNR, MDKP-PLWRK.
IF MDKP-CFLAG EQ 'X'.
CLEAR MDTBX. REFRESH MDTBX.
IMPORT MDTBX FROM DATABASE MDTC(AR) ID MDKP-DTNUM.
LOOP AT MDTBX.
MOVE MDTBX TO MDTB.
SELECT SINGLE * FROM T457T WHERE SPRAS = 'E'
AND DELKZ = MDTB-DELKZ.
IF MDTB-PLUMI = '-'. MULTIPLY MDTB-MNG01 BY -1. ENDIF.
WRITE:/ MDTB-DAT00, T457T-DELB1, MDTB-VSTAT,
MDTB-MNG01, MDTB-LGORT.
ENDLOOP.
ELSE.
SELECT * FROM MDTB
WHERE DTNUM EQ MDKP-DTNUM
ORDER BY PRIMARY KEY.
SELECT SINGLE * FROM T457T WHERE SPRAS = 'E'
AND DELKZ = MDTB-DELKZ.
IF MDTB-PLUMI = '-'. MULTIPLY MDTB-MNG01 BY -1. ENDIF.
WRITE:/ MDTB-DAT00, T457T-DELB1, MDTB-VSTAT,
MDTB-MNG01, MDTB-LGORT.
ENDSELECT.
ENDIF.
ENDSELECT.
This is taken from www.sap-img.com
Hope this helps you. -
Hi I am developing a report to display the MRP results collectively.
what is the table from which i can get the MRP results like current stock, Purchase requisition and purchsae orders for various time periods.
Solai
[email protected]Hi ,
U can also look into table MDKP - Header Data for MRP Document alongwith MDTB .
Hope this helps. -
Tables for Single-quantity Inspection Lot Results
Hello! I hope someone could help me out on this one:
Please correct me if I'm wrong, but I noticed that in an inspection lot, the results of the inspection is stored in the table QASE, but only if the quantity inspected is greater than one. So, my questions are:
1. Which table are the results for single-quantity results are stored?
2. [Optional] Why are the results not stored in the QASE table?
Thank you in advance.Thank you very much for the response. However, the QAMR table does not contain the data I need that table QASE has, specifically:
Serial number (QASE-SERIALNR)
inspection results (QASE-MESSWERT)
Additional input from anyone would be greatly appreciated. -
Table for the recorded result.Result automatically calculated using formula
Hi experts,
I want to know where this results will be saved(table name) when we use formula in inspection plan.I have marked char.calc in control indicator and formula has been entered in inspection plan.While entering the result when i click on calc button it is displaying correct result and i have saved.when i check the table QAMR,QASR it is not displaying the result for the MIC which i have used formula.I am able to see the formula in QAMV table.When i want to display this result can i retrive the result directly from any of the table or shall i calculate the formula in the program to display? If i should calculate the formula how to calculate?
Regards,
Shwetha.Hii,
If u are using Inspection point for the results recording then results will get stored in QASR table. The manually entered results alone will get stored in the Original_ Input field. Calculated parameters will get stored in the mittelwert field (mean value). Kindly check QASE table for lot without inspection points.
For ex : Results Field name mean value (1.7500000000E+02)
with regards,
K.Lokesh. -
Program or exit/BAdi for table DVER (Material Consumption for MRP Area)
Hi,
I want to update table DVER (Material Consumption for MRP Area).
Please suggest if any program or exit/BAdi.Check these function modules:
CONSUMPTION_EXI_MAT_PLA_PE_DB
CONSUMPTION_READ_FOR_MM_DB
CONSUMPTION_REF_MAT_PLA_PE_DB
DVER_GENERIC_EXIS_MATNR
DVER_GENERIC_EXIS_MATNR_DB_PER
DVER_GENERIC_READ_MATNR_PLA_PE
DVER_GET_BILD
DVER_SET_DATA
DVER_SET_SUB
A badi/user exit is triggerred when a standard transaction is run.Let me know if you want to update the table when a std. transaction is executed and the transaction code. -
MRP result differences for PD, HB setting materials
Hi all,
I have two materials which were set with PD and HB. But the MRP results were calculated differently.
Material A - planned order with correct quantity was generated. The quantity was calculated as ' maximum stock level minus availability stock'
Material B - planned order with the quantity to replenish only shortage was generated. Maximum stock level was not used for calculating the planned order quantity.
Could you please provide me the answer why two different result were generated?
Thanks for your support!!!Thank you for all the response.
However, MRP type, checking rule, lot size key setting are both same.
Detailes results are as follows;
Material A Max. stock level 45,000g (Round value 1000g)
Date MRP element Required Qty Available Qty
2009/6/12 Stock 24,849.56 24,849.56
2009/6/12 Safety Stock -15,000 9,849.56
2009/6/18 Ord Res -4,957 4,892.56
2009/6/26 Planned Ord 26,000 30,892.56
2009/6/26 Ord Res -4,957 25,935.56
Material B Max. stock level 14,550g (Rounding value 100g)
2009/6/12 Stock 14,527.90 14,527.90
2009/6/12 Safety Stock -4,850 9,677.90
2009/6/15 Ord Res -10,086.87 -408.97
2009/6/15 Ord Res -1,048.74 -1,457.71
2009/6/19 Planned Ord 1,500 42.29
For the material B, only the shortage quantity is proposed by SAP irrespective of the max. stock level. -
What is Impact to table MDTC of Chg Storage Mode for MRP to Transparent
We are evaluating a change in SPRO to change the storage mode of MRP List data to transparent form which will populate the table MDTB which could be used by reports and queries. Currently the data is stored in compressed form in table MDTC.
My question is if I set the system to store the MRP list transparently in MDTB will the system stop storing the data in compressed form in MDTC or will it store the MRP List data in both files moving forward.
My concern is I do not want to break any processes that are in place today by changing this setting.
In SPRO this setting is changed in :
Production -> Material Requirements Planning ->Check of performance settings -> Check storage mode for MRP List
The setting can be changed per PLANT.
Thanks for ANY information you have !!This would be a question better directed to OSS.
Rob -
Hi All,
I've managed to come out with the MPR results using Crystal Report 2010 using crosstab.
My question is,
How can i get the date and workweek as shown in B1 MRP results?
Refer to screenshot below.
The columns is basically MSN2.PeriodID
But if i were to output it directly from B1 using the MRP.
I will get output like this.
How can i get that kind of value to show in Crystal report?
Which table should i get it from?
What condition should i use?
Thank you very much for your help.Hi Adrian,
To get the table info, joins etc, please repost to the SAP Business One Application space.
-Abhilash
Maybe you are looking for
-
OPMN Agent throwing error while running ODIOSCOMMAND parameter in package
Hello, I have installed OPMN to run my standalone agent as windows service. I am able to run all objects except it fails to run ODIOSCOMMAND parameter in package at this step it is failing. Now I stopped OPMN instance from services and started agent
-
Using usb modem in laptop: best settings for one location
Using VZAccess manager what are the best Options / Preference settings for a one location laptop ? Thank you fdleyda
-
XI 3.0 inst files : Why is "DVD RDBMS MSSQLSRV 2000" not available ?
Hi SDN, can anyone tell me why software download archive "DVD RDBMS MSSQLSRV 2000" is not available under /swdc at Service Marketplace ? In our company we are just about to install XI 3.0. We are going for the MS-SQL database and we have used SAP Dow
-
Unity 5.0 compatibility with Exchange 2010 SP2?
Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified mess
-
AS stated the middle of the right side monitor screen is moving toward the middle. Does anyone has a solution. It started this process about five days ago. Thanks.