Table for Profit center for Valid Plant

Hello,
Kindly provide me the Table for the Valid Profit centre against the Plant.in the result it should give me the list of Plant and Profit Centre.
Thanks
regards

There is no direct assignment between plant and profit center. It is indirectly done in each material master
Thanks and Regards

Similar Messages

Substitution for profit center for credit line item

Hi
There is some common material sold in two segments. (Example head phone is sold from cell phone segment and computer segment). These segments are created as a division also for SD purpose.
Now for determining the profit center, i am using the validation rule. Logic: if the division in sales order is cell phone, entry should be posted in cell phone division. So my revenue and PGI will be in cell phone segment.
When head phone was procured, it was procured in computer segment (division). So my inventory credit should be the posted to computer segment (via profit center) and consumption should be posted to cell phone division (for matching with revenue). Hence i want some substitution rule for posting to two different profit center ( or segments, determined by profit center) at the time of PGI. Debit (consumption) should be to the profit center for cell phone and credit (inventory posting) should be to profit for computer.
Please help.
Edited by: Meenu_ND on Jun 23, 2011 8:02 PM

Hi
In an ideal scenario, profit center is derived from material master. Since, your business is such that profit center is nto known as unique for a material master, try using the following BADI to derive profit center at the time of Goods movement document. You should not maintain profit center in material master in such a case.
MB_MIGO_ITEM_BADI
MB_MIGO_BADI
Regards
Sanil Bhandari

Validation for Profit Center and Trading Partner

Hi Gurus,
Please help me in creating validation for Profit Center and Trading Partner.
I want system to give an error if we use Trading Partner related to particular profit centers.
Please revert asap.
Thank You

Hello,
Please use T.code OB28 and select the call up point 2.
Than go to Prerequisite in expert mode and say
Prerequisite : BSEG-VBUND <> ' '
Check: BSEG-PRCTR = ' '
Error Message.: xyz
I have created Validation understanding if someone gives Trading Partner and also Profit center while posting a doc than it will generate an error message.
however if you have some diff req please change it accordingly/ take Abapers helps if not very clear.
I hope this helps
Regards
Shireesh

Tables for Profit center and Risk Category

Hi,
Can anyone please tell me in which tables the values for profit center and risk category is maintained at.
Thanks
Lilan

Hi Lilan,
Profit Centre's Data element is PRCTR. You can just press Where used button by going into SE11 and see in what scenario you need this field.
Because PRCTR field is maintained for Sales Order, Production Order tables and many other tables.
You need to look into ur requirement that what scenrio u are working in.
Please award points if helpful.
Regards,
Himanshu.

Table for Substitution rules for profit center

Can anybody help me with the table name for Substitution rules for profit centers ?
Thanks
Sandeep

Hi
Check This tables
CEPC - Profit Center
CSKS - Cost Center
Ranga

Table for Profit center report grp

Dear Sapgurs,
in this t code GR55 system it showing list of Profit center report grps, can u please tell me what is the table for Table for Profit center report grp and how to create new profit center report group, Once we will click on F1 system it shows structure not tables.
Reg
Hanu
Moderator: Please, search SDN. This questions has been answered several times.

EC-PCA (KE1)         Profit Center Accounting
CEPC                 Profit Center Master Data Table   MANDT / PRCTR / DATBI / KOKRS
CEPCT                Texts for Profit Center Master Da MANDT / SPRAS / PRCTR / DATBI
CEPC_BUKRS           Assignment of Profit Center to a MANDT / KOKRS / PRCTR / BUKRS
GLPCA                EC-PCA: Actual Line Items         RCLNT / GL_SIRID
GLPCC                EC-PCA: Transaction Attributes    MANDT / OBJNR
GLPCO                EC-PCA: Object Table for Account MANDT / OBJNR
GLPCP                EC-PCA: Plan Line Items           RCLNT / GL_SIRID
thanks & Regards
Swathi
Edited by: swathi sajja on Aug 5, 2008 12:08 PM

Validation for Profit Center & Business Area

Experts,
If I want to add new validation rule for another profit center and business area which is not in the current rule defined.
Prerequisit will remain same.
Check : is as below for other profit center and business area. Message will also remain same which is already defined.
CHECK:
OR
( BSEG-PRCTR >= 'VS0001' AND BSEG-PRCTR <= 'VSZZZZ'
AND
BSEG-GSBER = 'SPFN' )
OR
( BSEG-PRCTR = 'EBT021' AND BSEG-GSBER = 'SPFN' )
OR
Requirement: we want to add new profit center EBT022 and Business area SPFN.
Please explain how can I achieve this? Do I need to add one more line as below in between the whole CHECK Rule specified?
OR
( BSEG-PRCTR = 'EBT022' AND BSEG-GSBER = 'SPFN' )
- Nilesh

Gaurav,
Before maintaining this validation rule, when we try to post transaction. We have tried with other combination of Business area and desired business area. Message appears "Profit Center not consistant with Business Area".
What is the logic behind this? This is just for my understanding..
If we create rule for new Profit Center for desired Business Area then possibly system will not throw error message.
Please correct me if I am wrong?
- Nilesh

Report Painter Report for Profit Center

Hi All,
I am creating a report for profit center in GRR1.I was using library 8A3,& ledger 8A.which uses for PCA line i tems and table used is GLPCT.which shows profit center totals by period.I ran GLPCT in SE16 and found out No data selected.I see that profit center accounting is not active in my system ECC6.0
and I didn't see any line records for profit center in any of the profit center tables.GLPCA.Now if someone knidly suggets me how to achieve this report, can I still do it profit center wise or not? which library should i use in GRR1.The layout of my report is as under.Thanks
CURRENT MONTH*
Current Yr      Current Yr    Prior Yr
Actual            Budget        Actual          Variance
YEAR TO DATE
Current Yr      Current          Prior Yr        Annual
Actual            Budget        Actual           Budget    Variance
Regards
Shaun

Thanks Abhijit , I can now see my report group at the bottom of the list .I assigned you full points.I posted another question regarding report painter .If you could also give me some guidance on that.When I was creating rows and updating cost elements with account numbers.I set up 3 revenue accounts and then ran the report to see if I get any data for profit centers.I did get data but when I double clicked on one of the account,it displays this messsage.I read the msg. but could not make any sense with it.for example in definning row I put account number from/to 400000- 400000    Explode. and thats a characteristic.
No valid master data for characteristic 'Account Number'
Report MEG1 does not contain any data pages.
No valid master data for characteristic 'Account Number'
Message no. GR633
Diagnosis
No valid master data within the specified interval was found for the characteristic 'Account Number'.
Explanation:
For each characteristic that is processed in a report, the Report Writer optimizes the interval limits which are relevant for selecting data from the database.
Example:
A report contains the characteristic 'account', for which an account interval from 100000 to 200000 has been entered. However, if the master data validation shows that the lowest/highest account in this interval is 110000/190000, the selection will be limited to accounts 110000 to 190000 only.
The system returns this error message if no master data exists for the interval.
This error is typically caused by an invalid version. In FI-SL Special Purpose Ledger, for example, versions are assigned to the ledger and are defined in configuration. The report definition can then contain a non-defined version. A similar situation applies to controlling (cost center accounting): here, versions are assigned to the controlling area and fiscal year and can be defined in planning.
Another cause of this error is a ledger that is not assigned to the table for which the report was created.
Technical information:
The field name for 'Account Number' is 'RACCT'.
System Response
The system cancels processing.
Procedure
Check the report definition, or the specified master data, or the intervals.
Regards
Shaun

How to create master data source for Profit center group in source system

Profit center group information is available in SAP(T-code:kch3). But, I want to have this information in BW too.
Can anyone tell me how to create a datasource for Profit center group? And which SAP table is able to feed master data for this information?
Many thanks
rajatina.

HI ,
It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
Here ais note from the forums to get profit center group from table
From Table SETLEAF, Field SETCLASS = '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
You will get Group name in Field SETNAME.
Regards,
Sathya

Screen-exit for profit center creation - transaction KE51.

Hi All,
Background: The client has the requirement of importing profit centre master data from legacy system into SAP ECC system. Few of the legacy data could not be filled into existing sap fields, hence the requirement has been to populate the data into custom fields.
The client also has the requirement, that the same fields are required during online entry. For this we need to enhance the profit centre creation screen (transaction code KE51) with two additional custom fields.
Requirement: To enhance profit centre creation screen with custom fields. Screen-exit for KE51 transaction.
Pre-work: Program SAPLRKPM in SAP ECC system is the main program. It does not have any screen or sub screen area for custom fields addition. Debugged the program to check for screen-exits, found none.
Below user-exits are not either screen-exits or cannot be used for enhancing profit center screen.
PCA00001 EC-PCA: Document changes for data transfer
PCA00002 Profit Center Accounting: derivation of representative mat.
PCA00003 Derive Partner Profit Center for External Deliveries
PCA00004 Check valuation for invoice verification with transfer price
PCA00005 Check valuation for invoice verification with transfer price
PCASELEK EC-PCA: Selection criteria for data transfer
Solution required for: Could anyone please let me know if it is possible to enhance the profit center creation screen. If yes, please provide the names of the screen-exit/ badi exit.
(Just a thought, modifying the standard seems to be the only solution, this should be the last option and i agree, please provide your inputs.)
Thanks in advance.
Warm Regards,
Goutham.

Thank you Manohar for the response.
The requirement is to display custom fields on standard sap screen and there are no screen-exits. So, i suppose the standard screen has to be modified.
Could you please provide brief explanation on
May be you should consider maintaining custom mapping table instead of going for chaning standard.
With Regards,
Goutham.

Re:- How to see customer/vendor open items for profit center wise

any one help me regarding : How to see customer/vendor open items for profit center wise. That is possiable or not please suggest to me. I am using 4.6c version .

Run the report from Tcode FBL1N for vendor open item and from FBL5N fron Customer open items.
When you get the report, click on Change Layout icon ( or press Control + F8 from keyboard), search Profit Center fron the Table of Hidden fields on the right hand side. Move that field to the Left hand side table. Click ok, now you should be able to see the Profit Center column in your report.
You can save this layout by clicking on the Save Layout icon ( or press Control + F12 from keyboard)
Next time you can choose the saved layout by clicking on the Select Layout icon ( or press Control + F9 from keyboard)
Regards
Dharmveer

BAPI_PO_CHANGE me22n add profit center for purchase requisition number

Hello all,
I have to add an item line for a specific sales order( p_vbeln ).
for that i use BAPI_SALESORDER_CHANGE and it works and the item is inserted.
( p_posnr = sales order item and ln_etnr = schedule_line = 1 )
Now I have to maintain the specific po item line and to insert the Profit Center related to the Purchase Requisition Number that was assigned to the above sales order item like using transaction ME22N.
when i use the transaction all i have to do is to ADD the Purchase requisition number to the PO Order Number and to add the PROFIT CENTER.
for this i use BAPI_PO_CHANGE.
i colect the folowing data:
from table VBFA( vbelv = sales order number vbeln = l_ebeln)
PO Number = p_ebeln.
from table VBEP ( vbeln = sales order number, posnr = the previously inserted sales order item )
Purchase Requisition Number = l_banfn
Purchase Requisition Item = l_bnfpo
from table VBAP (vbeln = sales order number, posnr = the previously inserted sales order item )
Profit Center = l_prctr
from table EKKN
select max( ebelp )
from ekkn
into l_ebelp
where ebeln = l_ebeln.
add 10 to l_ebelp
Purchase Order Item = l_ebelp .
and i move the data:
i_t_poitem-po_item = l_ebelp.
i_t_poitem-preq_no = l_banfn.
i_t_poitem-preq_item = l_bnfpo.
i_t_poitem-acctasscat = cc_x.
APPEND i_t_poitem.
i_t_poitemx-po_item = l_ebelp.
i_t_poitemx-po_itemx = cc_x.
i_t_poitemx-preq_no = cc_x.
i_t_poitemx-preq_item = cc_x.
i_t_poitemx-acctasscat = cc_x.
APPEND i_t_poitemx.
i_t_poaccount-po_item = l_ebelp.
i_t_poaccount-itm_number = p_posnr.
i_t_poaccount-SCHED_LINE = ln_etnr.
i_t_poaccount-profit_ctr = l_prctr.
APPEND i_t_poaccount.
i_t_poaccountx-po_item = l_ebelp.
i_t_poaccountx-profit_ctr = cc_x.
APPEND i_t_poaccountx.
then i use the function BAPI_PO_CHANGE:
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      purchaseorder                = p_ebeln
      testrun                          = l_test
   TABLES
     return                            = i_t_return_po
     poitem                          = i_t_poitem
     poitemx                        = i_t_poitemx
     poaccount                    = i_t_poaccount
     poaccountx                   = i_t_poaccountx.
BUT i get the folowing result ( messages in return table)
Insert item for PO-order
Message: Changing of PO using Enjoy BAPI unsuccessful ;
Message: Purchase order item 00120 still contains faulty account assignments ;
Message: Enter Profit Center ;
what should i do?
best regards,
emilia

hello,
i debugged the function.
first the data from poaccount is copied in lt_account.
then this happens:
PERFORM get_current_data
      TABLES    poitem               poschedule               poaccount
                pocondheader         pocond
                extensionout
                poexpimpitem         allversions              popartner
                potextheader         potextitem               return
      USING
                l_po                 lf_header_currency
      CHANGING
                expheader            exppoexpimpheader.
exppoexpimpheader = poexpimpheader. "foreign trade export workaround
after this form is executed poaccount-profit_ctr is empty.
lt_account-profit_ctr in not empty but then it is not anymore.
in the form this happens:
item data
CALL METHOD im_po->get_items
    IMPORTING
      ex_items = lt_items.
LOOP AT lt_items INTO an_item.
    l_item ?= an_item-model.
    CALL METHOD l_item->get_data
      IMPORTING
        ex_data = ls_mepoitem.
    ls_mepoitem-ebeln = ls_header-ebeln.
    APPEND ls_mepoitem TO lt_item.
schedules
accountings*
    CALL METHOD l_item->get_po_accountings
      IMPORTING
        ex_accountings = lt_accountings.
    LOOP AT lt_accountings INTO an_item.
      l_accounting ?= an_item-model.
      CALL METHOD l_accounting->get_data
        IMPORTING
          ex_data = ls_mepoaccounting.
      ls_mepoaccounting-ebeln = ls_header-ebeln.
      APPEND ls_mepoaccounting TO lt_account.
    ENDLOOP.
item conditions
foreign trade (item data; EIPO)
ENDLOOP.
so it acctualy copies every item from purchase number ebeln in lt_item.
for each one of them it copies the account data into lt_account.
so the last loop is for the item that i want to enhance.
here it copies all the necessary data in lt_account except of course the profit center because that's the one that i need to insert.
after this loop there is a form:
PERFORM move_account_out TABLES lt_account
                                                            ext_poaccount
                           USING header_currency.
where the ext_poaccount is the poaccount parameter.
this form:
clears ext_poaccount.
copies the data from lt_account into ext_poaccount.
and returns the ext_poaccount with the empty Profit center field
and so after performing get_current_data my parameter is deleted.
then it's almost the end of the function and nothing else related to the poaccount parameter.
so it's no use for me to insert the field Profit_Center?
is there another FM that i should use to be able to insert the profit center?
what should i do?
Best regards,
Emilia

Profit center for Open items

Hi,
We have a stanndard report for customer evaluation is 'RFDOPR00'.This report is working based on company code level.
But our client needs a custom report which should work based on Profit center.
for that I have created a report for customer evaluation taking profit center value from BSID table. But in this table no PRCTR value filled except 0099990000.
So in this case, how can we get profit center value to make a report.
Kindly provide me a solution for this...
Thank you!!!
Regards,
Anilkumar.G

Hi,
Thanks for your replies...
Actually the standard report program is using LDB 'DDF' and inside source code we have PRCTR. But not able to find the table name (which are having open items) where PRCTR value will be available..
Regards,
Anilkumar.G

Validation for Cost center for Goods issue against the cost centers

Dear Friends
In my client place we have 6 plants are defined and profit centers are defined for each plant. Hence here each plant is one profit center. Cost centers are defined plant wise.
The requirement is when the goods issued to cost center system should check the cost center is defined against the plant. ( i.e., Cost center def against the Profit Center, and Profit center equal to Plant).
Is there any provision to assign the plant to profit center or vice versa?
Please guide me how to resolve the issue.
Thanks in advance.

Hi
Please check EC01. May be it can help you. But in my view it is not possible.

Reporting - restricted for profit center-wise

Hi
My client has two profit centers (1000 and 2000) in one company code. Both profit centers are totally independent. Now my client requirement is that when user of profit center 1000 runs AR01 (i.e. asset balances), he should be able to see assets only for his profit centers i.e. 1000. Asset of profit center 2000 should not appear in that report.
In EHP 4, there is provision for Profit Center-wise document posting, change and display functionality. But i want to know if this profit center-wise authorization will work for asset balances report (AR01) and other assets reports also.
Please help.
Edited by: Deepak Agrawal on Jan 1, 2012 5:43 PM

K_PCA or authorization object for profit center is not check in assets report.
In AR01 you cannot restrict the results to profit center as it is not checked in authorization . The fields which are checked are company code , Asset class and asset views.
Hence you will have to lookup for alternatives like selection based on plant or cost center or responsible cost center etc.
In case if the requirement is a show stopper then you will have to code the things in Enhancement points as there are no BADI or Exits available for the same .
Cheers,
Dewang

Table for Profit center for Valid Plant

Similar Messages

Maybe you are looking for