Table getting disabled

Hi,
All my cell editors in the table are getting disabled when attach my model node to the table.
Can any one give me a solution please
regards,
Kumar.

Hi Aditya,
The table is disabled because you haven't created elements for the node. Each row of a table represents an element of the bounded node. So before the table is displayed, create as many elements as the no: of rows you want by this code:
Let <table node> be the node that you have bound to the table.
IPrivate<your view>.I<tableNode>Element elmt;
for(int i=0;i<no_of_rows_req;i++)
elmt = wdContext.node<table node>().create<table node>Element();
// if you want some data to be shown as the default ones, you can do it here as
elmt.set<attribute name>(<data>);
wdContext.node<table node>().addElement(elmt);
Now those many rows will be active.
Hope this helps,
Best Regards,
Nibu.

Similar Messages

O4NCN screen is getting disabled

Hi Guys,
In production system, when creating nomination ,the screen is getting disabled for the first default item &0000001.I debugged the program and indide one FM OIJ_NOM_FIELDSTATUS is executing to get changeable of changed fields of header and item table .I checked in development and it is working fine. But in production it is not working.
what configuration will effect for the default item. Please let me know.
for enable the screen ,I am deleting first item and again creating with new item i'e' &000002 item for temporary solution.
Regards,
Rayeez

Resolved issue myself.
Regards,
Rayeez

Table Control: Disabling editing for a column

Hi everyone. Greetings from Buenos Aires, Argentina.
First of all, I want to apologize for this question in case of it has already been made. The forum is too large to read it completely and I really need the answer, if any, to my trouble.
I have a table control inside a screen. In it's PBO, I coded a module to change the table control attributes. I declared a work area like the line of the table control's control in order to loop it. I mean this:
In the TOP of Table Control (I made it by using the wizard) I have this:
CONTROLS: TC_1 TYPE TABLE VIEW USING SCREEN dynpro_number)
And in the PBO module I have typed the following:
MODULE control_change_attrs OUTPUT.
DATA: wa_tc_1 LIKE LINE OF TC_1-COLS.
LOOP AT TC_1-COLS INTO wa_tc_1.
ENDLOOP.
ENDMODULE.
In the (...), I have put code with such a logic that, depending of the contents of certain fields in the dynpro, it will hide (or not) some columns of the Table Control. This part is made correctly.
This logic, also makes (or should make) the table control to disable the input of a column, depending wether a flag is active or not. This flag is activated in other screen's PAI, which is called depending on the contents of the sy-ucomm field of this screen (the one with the table control).
The (...) is something like this (I'll omit some parts):
IF wa_tc_1-screen-name = 'COLUMN_TO_HIDE'.
   IF gv_flag = 'X'.
      wa_tc_1-screen-input = 0.
   ENDIF.
   MODIFY TC_1-COLS FROM wa_tc_1.
ENDIF.
In a PAI module of this screen, I have coded the following:
MODULE user_command INPUT.
CASE gv_ok_code.
   WHEN 'RUN'.
      PERFORM RUN.
    WHEN ...
ENDCASE.
END MODULE.
And in the RUN subroutine, obviusly among other things, I have this:
CALL SCREEN 0150 STARTING AT XX YY.
In a module in the PBO of the screen 0150, I clear gv_ok_code. In a PAI module, this is what I have put:
CASE gv_ok_code.
   WHEN 'ACCEPT'.
      gv_flag = 'X'.
      CLEAR gv_ok_code.
      LEAVE TO SCREEN 0.
WHEN ...
WHEN ...
ENDCASE
The thing is, when the contents of gv_ok_code is 'ACCEPT' and therefore the flag is activated, then the 0150 screen's PAI finishes and the previous screen's PBO is processed, I know for sure (by the mean of the debugging mode) that the table controls's atrributes are correctly modified, and the most important thing, they stay like that... But, the column desired does not gets disabled, at least not until the NEXT PBO (I mean, it gets disabled when I press the Enter key).
Why is happening this?

Thanks a lot for the response, Max.
I' ve been testing your answer. When I implemented the code that you suggested, after the first PAI, the table control's columns appear as I want.
The thing is, in order to test if the changes in the columns are reflected in the screen after the call of the dynpro no. 0150 (and the obvious return to the first one), I need to be able to select one or more table control's rows (since when I followed the table control wizard, I made it with selection column, and with multiple selection). But, after implementing your code, I'm not able any longer to select any rows.
I click on them, but they don't turn yellow. I commented the call of the module inside the LOOP AT itab... of the PBO and I was able to select them once again, so we're sure the problem is caused because of the call to this new module. But why?
Note: you should know, since the table control is with multilpe selection, the LOOP sentence in the PBO is like this:
LOOP AT itable
       INTO work_area
       CONTROL tc_1
       WITH CURSOR tc_1-current_line.
MODULE change_attribs.
ENDLOOP.
Does that give a hint to you?

HELP! On PC reboot all my extensions get disabled and each one opens a new Tab!

Help!!!
On PC reboot all my extensions get disabled and each one opens a new Tab!
I have seen 2 threads here about this issue and a few more by googling the problem.
However nothing, nothing, noithing... worked!
Win7, MS Office 2007, Sony Vaio SZ1VP, FF 10.0
and:
>
Download Unlimited 1.0, Read it Later 2.1.4, Pixlr Grabber 2.1.1, Cool Preview 3.5, Telyfi 1.2.5, Speed Dial 0.9.6.4, Google shortcuts 2.1.7.1, Scrapbook 1.4.9, Screen Grab (fix Version) 0.9.6.3c, Vertical Toolbar 0.2.6, Google Translator for Firefox 2.1.0.1, TinEye Reverse Image Search 1.1, Grooveshark Premium, 2.0.2, Quick Maps 1.5.0.
>
To try to solve this issue, I:
Uninstalled:
Antivirus (BitDefender)
PC Cleaner (CCCleaner)
Flash,
Java,
Shockwave,
MediaPlayer...
FF (deleting all the settings).
Then reboot twice for safety.
Then re-installed Java, Flash, Shockwave.
Reboot once more.
Re-installed FF, reboot once more.
Checked that all the plugins were updated, and only then I finally installed my extensions.
Checked that the user.js and preferences.js were not read only.
Everything worked fine (even FF restart) until the next OS reboot!
Then it all strated again!!!!!! It's driving me crazy!!!! Please, help! Machine cannot defeat man... or, better, machine can defeat me, but not the whole of the FF community!!!!!
Please, I must get to the end of this story! Help!!!
Tommaso

NM, got it fixed. Thanks!!!

WPS no longer gets disabled by BT

If I ever had to reset my homehub 3 (type A) I remember that wps became available for a short while until BT disabled it again. However since it upgraded to the latest firmware, wps no longer gets disabled by BT. Does this mean that the security issue with wps has been fixed in the latest firmware?
Thanks
Solved!
Go to Solution.

Hi Guys
Sorry for the delay un updating you.
We recently started to switch on the WPS functionality on our Hub 3’s. It is being rolled out over the next few months so some hubs have had this enabled already but it will take a while to have this rolled out across all hub 3.0s.
Rest assured that we would not be doing this if there were any security concerns in switching on WPS.
Cheers
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Fields not getting disable

Hi All,
I am using PCUI application CRMM_ACCOUNT with Old Floor Plan. I want to make field Country as Read only. So I selected FieldGroup as ACC_SRES_COUNTRY and field Conutry. I made field as 'Read only'. Due to this my field gets disable in List view but when i check same field in Detail View it is enabled.
Has anyone have idea what i am missing or what is reason for it?
Regards,
Vikas

Hi Vikas
I also faced the same problem and get resolved it by making some extra work.
are you using any view of this application ?if yes than
what you need to do is to make country field read only for your view. for that copy all the fields with your view in same field group. now check the read only for this field.
I am sure it will resolve the issue
Regards!!
Edited by: Amit Saini on Apr 11, 2008 5:51 PM

"Edit Report" option getting disabled on saving the report in BPC 10.0

I have created input schedules using "Edit Report" functionality in BPC 10.0 NW, added a few buttons and corresponding VB code and tested the input schedule by sending data and running data manager package. Everything is working fine. After that I saved the input schedule and closed the Excel. On reopening the excel Add-in and the input schdule, the "Edit report" option becomes disabled and refresh and other functionalities available for the report get disabled. I have faced this issue a couple of times. Has anybody else faced this issue? Can someone let me know the resolution to this problem?

Hi Shruti,
This is probably happening because the report/input schedules is not getting connected. Please check the connections once.
Also if you had named the report in "Edit Report" earlier, say for example "Sales Report", once the report is open you should be able to see this name on the EPM context pane, right side under Current Report: Connected to "Your Model" and below that in the drop down the default selection should be "Sales Report". This means that the report is connected and the Edit Report option is active.
Hope this helps.
Regards,
Bhairavi

How and when does a dimension table gets generated

Hi Gurus,
                 I am new into BI and I will be put into a project within 2 months. I have learned that dimension table contains the sid's of all the charateristics in the dimension table. My conclusions are like
1. Dimension table contains the dim id as the primary key.
2. Dimension table contains sid's of the characteristics.
3. Though sid's in the dimension table are primary keys in thier 'S' table they are not key in the dimension table.
My question is
1. Is there any chance to generate new dim id's for the same combination of sid's because sid's are not part of the key?
2. I got confused when and how does the dimension table gets generated ?
I have searched in the forum and google but still my doubts didnt get clarified. If anyone could throw some light on this topic I would really appreciate it.

HI,
All your conclusions are correct.
Now for your questions the answers are in line:
1. Is there any chance to generate new dim id's for the same combination of sid's because sid's are not part of the key?
    No new dim id's will be generated, dim Id is unique for the same combination of sid's .
2. I got confused when and how does the dimension table gets generated ?
    They get generated when you activate the info provider.
Hope this helps.
thanks,
Rahul

LOV getting disabled while passivation

When running my ADF application with AM pooling switched off to test passivation/activation, a particular LOV is getting disabled once you select a value for it. User should be allowed to change the value here as many times he/she wishes. Issue occurs only while AM pooling is switched off. The LOV has a partial trigger set, but is not behaving as expected. Please find the code snippet below:
<af:inputComboboxListOfValues id="defaultCurrencyConvTypeId"
popupTitle="#{ResourcesGenBundle['Header.SearchandSelect.Searchandselectanobjectusingad']}: #{bindings.DefaultCurrencyConvType.hints.label}"
value="#{bindings.DefaultCurrencyConvType.inputValue}"
label="#{bindings.DefaultCurrencyConvType.hints.label}"
model="#{bindings.DefaultCurrencyConvType.listOfValuesModel}"
required="#{bindings.DefaultCurrencyConvType.hints.mandatory}"
columns="#{bindings.DefaultCurrencyConvType.hints.displayWidth}"
shortDesc="#{bindings.DefaultCurrencyConvType.hints.tooltip}"
partialTriggers="businessUnitNameId"
disabled="#{bindings.BusinessUnitName1.inputValue == ''}"
showRequired="true">
<f:validator binding="#{bindings.DefaultCurrencyConvType.validator}"/>
</af:inputComboboxListOfValues>
Any pointers regarding the issue will be helpful.

As the log gets disabled when disabled="#{bindings.BusinessUnitName1.inputValue == ''}"You should check this binding.
Timo

IIS getting disabled..

Hi,
We have installed the OBIEE using IIS.. but IIS is getting disabled so OBIEE presenation services are coming down.. where can I check the log file for this and how can I fix this ..

Hi,
Re install IIS from windows control panel>add remove program or re install it from the windows CD

User not getting disabled

A particular user is not getting disabled. This is happening when it tries to disable one of the provisioned resources.
Logs:
2012-09-29 23:39:23,100 ERROR QuartzWorkerThread-3 XELLERATE.SERVER - Class/Method: tcProcessUtilities/disableProcess encounter some problems: {1}
2012-09-29 23:39:23,100 ERROR QuartzWorkerThread-3 XELLERATE.SERVER - Class/Method: tcOIU/disableObjectInstance Error :Unable to disable the object instance.
2012-09-29 23:39:23,100 INFO QuartzWorkerThread-3 XELLERATE.DATABASE - DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.RESOURCE_NOTCONFIGURED_PROPERLY'
2012-09-29 23:39:23,102 ERROR QuartzWorkerThread-3 XELLERATE.JAVACLIENT - Class/Method: tcTriggerUserProcesses/disableOrcs Error :Unable to disable the object instance.
2012-09-29 23:39:23,102 INFO QuartzWorkerThread-3 XELLERATE.DATABASE - DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.RESOURCE_NOTCONFIGURED_PROPERLY'
Please let me know what might be the problem. Thanks.

Hi Gyanprakash,
Thanks for your response.
1. Disable triggers are defined in that object and multiple instances enabled for that disable trigger task.
2. Object is still in provisioned state not disabled
3. Two of its tasks in that process instance are manually completed. Some prob has occured during completion of that task and they have manually completed it. So is that same problem hindering the disable flow also?

Screen getting disabled on pressing enter only

Hi All,
I have a module pool program, in which i am editing some fields on screen. Without any change change done if i press enter the screen gets disabled. As per logic it should happen on pressing save button only.
Any suugestions.
Thanks & Regards,
Nidhi Kothiyal

Hi
I think you are using loop at screen in PBO.
change it like this.
case ok_code.
when 'SAVE'.
loop at screen.
screen-input = 0.
modify screen.
endloop.
endcase.
Try to Clear the OK_CODE when you feel you dont need further.
Cheers
Ram

Skype getting disabled

I have skype set up to auto start when my computer starts up. However it will randomly get disabled in my start up menu in the task manager in windows 8.1. Anyone know why this keeps happening?
Solved!
Go to Solution.

Ahh ok. Well no it should not. If it's not a case of skype crashing (check event viever logs), it's probably another program (or setting) doing this. You could allways diasble the other non critical programs in startup, and see if it helps, then reenable them one by one.
Skype itself should only write to the registry key when told to (when you change it). So unless there is an issue in the version you are using, something else is doing this.
Do note that the regkey for autostart is user based (if nothing have changed), so skype might behave different for different user accounts on the same machine.

Users getting disabled during Synchronization

Hi All,
We are running Plumtree 5.0.2 in Windows Environment under Tomcat and also used Sample Application "Auth_HelloWorld-Java" as the base and modified it as per the current needs for Authentication and Synchronization. When I run the Synchronization under "Partial Users Synchronization" all the groups and users get imported correctly for the first time. When it is run again the users which were imported during the first run gets disabled automatically and they need to be enabled manually. This is putting us under lots of issues as the number of users are getting more.
Please do let me know how this can be solved.
Thanks , Raghu

Raghu,
I appologize for the delayed response, our notification seem to have been down over the weekend.
In so far as the problems you are having, the only reason that the users would get disabled is that they are not members of a group in the "Fully Synchronized Group List". This list is in the Authentication Source Editor, and should contain the groups from your remote Authentication Source that should be synchronized with the portal. Only users that are members of a group specified in that list will be imported.
Do you have any groups choosen?
Thanks,Akash

Buttons getting disabled in INBOX page of ICWC

Hi All,
We are trying to add a new column in INBOX result view of ICWC, AuiItem.htm.
Now for this we have inherited the standard ITERATOR class and created a Z class and wrote the code for fetching the data for newly created column.
Now when we are replacing the object of the Standard iterator class with our own iterator class in .htm page, the buttons which are present in the page are getting disabled.
But the data of the new column is getting populated.
Has any one faced similar issue??
Please reply with possible solutions
Thanks
Pranay

Hello Pranay,
I had the same problem.
pay attention that there are couple of methods related to buttons that use iterator ( for example CL_CRM_IC_AUIITEMS_IMPL->CHECK_SELECTION line 32 ).
There for if you change your iterator you shoud redifine those methods to use your new iterator,
<b>There are more methods</b> that use the iterator and you should change them all (atleast only those that you need)
Good Luck
Eli Steklov

Table getting disabled

Similar Messages

Maybe you are looking for