O4NCN screen is getting disabled

Hi Guys,
In production system, when creating nomination ,the screen is getting disabled for the first default item &0000001.I debugged the program and indide one FM OIJ_NOM_FIELDSTATUS is executing to get changeable of changed fields of header and item table .I checked in development and it is working fine. But in production it is not working.
what configuration will effect for the default item. Please let me know.
for enable the screen ,I am deleting first item and again creating with new item i'e' &000002 item for temporary solution.
Regards,
Rayeez

Resolved issue myself.
Regards,
Rayeez

Similar Messages

Screen getting disabled on pressing enter only

Hi All,
I have a module pool program, in which i am editing some fields on screen. Without any change change done if i press enter the screen gets disabled. As per logic it should happen on pressing save button only.
Any suugestions.
Thanks & Regards,
Nidhi Kothiyal

Hi
I think you are using loop at screen in PBO.
change it like this.
case ok_code.
when 'SAVE'.
loop at screen.
screen-input = 0.
modify screen.
endloop.
endcase.
Try to Clear the OK_CODE when you feel you dont need further.
Cheers
Ram

HT1212 hey i have forgotten iphone screen lock passcode and i have tried again and again so my iphone gets disabled . 1 and 23 hrs gone but it is still disabled . So please tell me what to do??? plzzz.

hey i have forgotten iphone screen lock passcode and i have tried again and again so my iphone gets disabled . 1 and 23 hrs gone but it is still disabled . So please tell me what to do??? plzzz

recovery mode
open itunes on computer
plug cable into computer not phone
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

Fb60 WHT screen get disable

In Fb60 WHT screen get disable even i already make the setting in vendor master for WHT liable how can I make enable the WHT Screen

Hi
I did like this:
I checked the GL account in the vendor (the reconciliation account).
I got the Field Status Group code: G019 (Other receivables/payables)
Go to t-code SM30 and change view V_T004F
Put the variant: 1000 > in my case
Change the Field status group G019 > field Taxes
>>> Withholding Tax Code >>> set as optional entry
>>> Withholding Tax Amounts >>> set as optional entry
With me work just fine
Regards
Arcturus

Checkbox gets disabled on custom screen

Hi All ,
I have a raise an error message on a custom screen which has an ALV grid display (OOPS ALV) .On top of the alv grid ,i have couple of checkboxes .
I have to raise error message based on the grid display values.The problem is ,if i raise error message ,the checkboxes get disabled and i have to go back and execute again correcting the problem .Instead the user wants to be in the same screen and should be allowed to correct .I am not able to do this .Please help me how to make the checkboxes active to input again without going back ??
thanks

Build the screen with 2 sub screen areas. In the top subscreen area ( selection screen )
, Have the 2 check boxes.
You can use
selection-screen begin of screen 800 as subscreen.
Parameters : var1 TYPE c AS CHECKBOX,
var2 TYPE c AS CHECKBOX.
selection-screen begin of screen 800 as subscreen.
You can use At selection screen events to throw an error but still be in the screen without an issue.
Have the ALV in the bottom subscreen area.
In the PBO for the main screen,
Call the subscreen 800 ( selection screen)
Call the subscreen ALV .
Hope it helps.
Cheers
Sujay

HELP! On PC reboot all my extensions get disabled and each one opens a new Tab!

Help!!!
On PC reboot all my extensions get disabled and each one opens a new Tab!
I have seen 2 threads here about this issue and a few more by googling the problem.
However nothing, nothing, noithing... worked!
Win7, MS Office 2007, Sony Vaio SZ1VP, FF 10.0
and:
>
Download Unlimited 1.0, Read it Later 2.1.4, Pixlr Grabber 2.1.1, Cool Preview 3.5, Telyfi 1.2.5, Speed Dial 0.9.6.4, Google shortcuts 2.1.7.1, Scrapbook 1.4.9, Screen Grab (fix Version) 0.9.6.3c, Vertical Toolbar 0.2.6, Google Translator for Firefox 2.1.0.1, TinEye Reverse Image Search 1.1, Grooveshark Premium, 2.0.2, Quick Maps 1.5.0.
>
To try to solve this issue, I:
Uninstalled:
Antivirus (BitDefender)
PC Cleaner (CCCleaner)
Flash,
Java,
Shockwave,
MediaPlayer...
FF (deleting all the settings).
Then reboot twice for safety.
Then re-installed Java, Flash, Shockwave.
Reboot once more.
Re-installed FF, reboot once more.
Checked that all the plugins were updated, and only then I finally installed my extensions.
Checked that the user.js and preferences.js were not read only.
Everything worked fine (even FF restart) until the next OS reboot!
Then it all strated again!!!!!! It's driving me crazy!!!! Please, help! Machine cannot defeat man... or, better, machine can defeat me, but not the whole of the FF community!!!!!
Please, I must get to the end of this story! Help!!!
Tommaso

NM, got it fixed. Thanks!!!

I have a new I phone 5c and every few days the screen icons get bigger , almost like the don't fit the screen anymore. I have to shut phone down , why is this

I have a new I phone 5c and every few days the screen icons get bigger , almost like the don't fit the screen anymore. I have to shut phone down , why is this

probably your zoom is on. try double tapping with three fingers on your screen, it should go back to normal and then goto
settings>general>accesibility>zoom and disable it

Event Linkage Getting Disabled In PO release Workflows : Plz help

hi all
i am working on PO Release Workflow
my problem is when I create PO and save it , the event linkage in SWETYPV gets disabled
plz help me its urgent.
regards
ravish

Hi
If you have an error in the event linkage (could be a binding error, or an error in your business object), the event linkage will deactivated (the standard customizing).
You can change this behavior through transaction SWE2 -> double click on your event linkage -> change the "Behavior Upon Error Feedback". (I think you can change this globally but I'm not quite sure where)
In my book best practice here will be;
1. Use the event queue
2. Set the "Behavior Upon Error Feedback" flag to something like "Keep linkage but flag as having an error" - I'm not on the system so I'm not quite sure what it's called
By doing this you make sure that you will collect your event in the event queue, in case of an error.
or
In the detail screen of SWETYPV there's an option called Bahaviour upon error in receiver, if you change this to option 3 then the linkage won't be disabled in cases of errors.
Sometimes you want the event linkage to be disabled in cases of errors, espescially when the only reason that an error can occur is a very serious one.

Menu option "other invoice document" gets disabled in MIR7 while Recording

Hi All,
I have one requirement when I have to open the parked invoice document ( MIRO) with MIR7.
I don't want to record each and every field and pass the bdcdata then with call transaction.
There is one option in MIR7 when under invoicedocumnet->other invoice document i can pass the invoice document number and the fiscal year.
I have the document number and the fiscal year as i have already parked the document with MIRO.
so i thought to record this and call the transaction then.
Problem: When i open MIR7 to record, the menu option invoicedocumnet->other invoice document gets disabled. I am not able to record this.
Is there any solution to this? Any BAPI exists ??
Otherwise i would have to record each and every field to pass the parked data into it ..
Thanks in advance
Regards
Mudit Batra

Hi,
check this:
program: SAPLMR1M
include: LMR1MI3U
MODULE (PAI) FCODE_6100
IF ok-code = fcook.
    mir4_change = 'X'.
    SET PARAMETER ID: 'RBN' FIELD rbkpv-belnr,
                      'GJR' FIELD rbkpv-gjahr,
                      'RBS' FIELD rbkpv-rbstat,
                      'CHG' FIELD mir4_change.
    IF sy-tcode = tcode_mir4.
      LEAVE TO TRANSACTION tcode_mir4 AND SKIP FIRST SCREEN.
    ELSE.
      CALL TRANSACTION tcode_mir4 AND SKIP FIRST SCREEN.
    ENDIF.
ENDIF.
SET SCREEN 0. LEAVE SCREEN.
Best regards.

PI charactersitics in Master Recipe gets disabled.

Hi,
I would like to update the Process Instruction characteristics in a Master Recipe using Change Master (CC01) via BDC.Now when there is a change in one of the PI characteristics, my program updates the PI characteristics in the Master Recipe via BDC by creating a new Change Master, but in case the user again runs the same program after updating the PI characterestics using a different Change Master, all the the relevant rows are getting disabled, thereby not making it possible to either enter or modify any values in future.
Could you please let me know why this happens and how to over ride this problem ??
Thanks in Advance.
Lakshmi.

Hi
To activate ECN for Master recipe u need to set the Following
1) In OPN0 - Default values for Master recipe choose the Profile with which u want to create the Master recipe and Click on details > In the Change Parameters at bottom select "with Change Number" for Change Rule and SAVE
2) In OP5A - Select the Screen Group PP/PI/QM task lists: header screens and tick *Req * for the field Change Number (PLKOD-AENNR) and SAVE
Now when u Creating New Master recipe system will give Error if no change no assigned
Pl refer the link for more details
[http://help.sap.com/saphelp_dimp50/helpdata/en/89/a4200b461e11d182b50000e829fbfe/content.htm]
Regards
Brahmaji

My ipod touch screen displays "ipod disabled" "connect to itunes". It won't let me connect to itunes or sign in

My ipod touch screen displays "ipod disabled" "connect to itunes". It won't let me connect to itunes or sign in

Hey there Rghanam01,
I see that you have an iPod that has been put into recovery mode and will need to be restored. Here is an article that will help you address this issue:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
Note that if you don’t see your device in iTunes, you will want to use the instructions under the “Get more help” section of the article:
Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Screen randomly gets corrupted

Regardless of what sites I am browsing the screen can get corrupted, including menu bars, download windows, etc. This also includes minimizing Firefox to go do something else in Windows, and all or part of the Firefox screen will pop back up, but will be more like a "ghost image" of it, i.e. mousing over things will reveal what *should* be there, making that part of the Firefox ghost-image disappear. This also happens to a lesser extent with Thunderbird.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

My addons get disabled everytime i restart my computer

Everytime i restart my pc and run firefox, all my addons are disabled ..
and i get such a screen asking for permission for each of my addons
http://tinypic.com/r/1z50w1u/6
if i give the permission and continue, and then do it for all the addons, and restart .. then it works fine but the problem occurs again the next time i restart the pc ..
the addon manager tab looks like this :
http://tinypic.com/r/zoicsh/6
i am also able to enable the addons from here, but they get disabled again and i get the same screens everytime i run firefox after a pc restart ...
thanks ..

Which security software (firewall, anti-virus) do you have?
Some security software has virtualization or sandbox features that may cause problems by protecting and restoring files in the Firefox profile folder.
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
If this hasn't helped then also try to delete the addons.sqlite file.
You can check for problems with preferences and try to rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help

my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help

OK. If you believe that.
When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
I tell you those are the signs of a disk that is about to die.
Allan

To whom it may concern Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E 2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in goo

To whom it may concern
Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
I look forward to your reply and a resolution of this problem.
Thank you very much!!!

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

O4NCN screen is getting disabled

Similar Messages

Maybe you are looking for