Table line discrepency between LiveCycle and Adobe

I'm experiencing differences in my project with table lines. I've ensured my lines meet up in the LiveCycle Preview PDF view. When my form is applied to our environement and viewing in Adobe Acrobat the table lines are off. See images provided where issue occurs in the tables for questions are 6d and 6e. I've also noticed when I increase the view size in Acrobat from 100 to 150% the issue goes away. Weird stuff. Any help would be greatly appreciated. I'm operating LiveCycle ES3 along with Adobe Reader 11.0

Dear Abhijit,
Thank you for your advice but unfortunately I see that it is not maintained for this warehouse but the issue is we have 2 Batches which have gone thru same movement types like 411 and 344 and both belong to same warehouse. For both the batches all the dates are been maintained related to SLED in MSC3n and the production dates. One is appearing in LX27 and the other is not appearing.
So after our analysis we understood that LX27 is dependent on LQUA-VFDAT but we are not very clear how this data is been filled in this table particularly any specific Transaction thru which it is filled for the first time.
Appreciate your quick reply on this
Regards
Gubba Mahesh

Similar Messages

  • NVL in view: discrepancy between 10G and 11G

    Hi,
    I've discovered some discrepancy between 10G and 11G in a way how view deals with NVL-based column in a where clause.
    Here are two examples:
    *10G:*
    Connected to:
    Oracle Database 10g Release 10.2.0.4.0 - Production
    SQL> create table test_nvl (null_column number);
    Table created.
    SQL> insert into test_nvl values (null);
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> create view view_nvl as select nvl(null_column,0) null_column from test_nvl;
    View created.
    SQL> select * from view_nvl where null_column is not null and null_column = 0;
    NULL_COLUMN
    0
    *11G*
    Connected to:
    Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
    SQL> create table test_nvl (null_column number);
    Table created.
    SQL> insert into test_nvl values (null);
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> create view view_nvl as select nvl(null_column,0) null_column from test_nvl;
    View created.
    SQL> select * from view_nvl where null_column is not null and null_column = 0;
    no rows selected
    Does anyone know why it behaves differently?
    I couldn't find any documentation regarding this.
    Or I'm just missing something here.
    Thanks

    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
    PL/SQL Release 11.2.0.2.0 - Production
    CORE     11.2.0.2.0     Production
    TNS for HPUX: Version 11.2.0.2.0 - Production
    NLSRTL Version 11.2.0.2.0 - Production
    CREATE TABLE test_nvl (null_column NUMBER);
    INSERT INTO test_nvl
         VALUES (NULL);
    COMMIT;
    CREATE VIEW view_nvl
    AS
       SELECT NVL (null_column, 0) null_column FROM test_nvl;
    SELECT *
      FROM view_nvl
    WHERE null_column IS NOT NULL AND null_column = 0;
    NULL_COLUMN
    0

  • How to achieve that "SELECT * FROM table WHERE age BETWEEN 18 AND 23 AND n"

    How to achieve the SQL like that "SELECT * FROM table WHERE age BETWEEN 18 AND 23 AND name = 'Will' " with BDB C-API
    The primary key in the primary database is 'age' ,and the secondary key in the secondary index is 'name' ,in a lot of examples ,there are all simple , but how to do that complex one.thx~

    but this means that the prepared statement is created
    each time I call my method and so I'm not sure that
    the optimizer will find it easy to cope with.You are right, the optimizer won't find that easy to deal with (presuming that is even relevant for your driver/database.) But most optimizers won't do anything with statements that change and that is what you are doing.
    You could create several prepared statements which have a common number of bind variables. For example 10 statements with from 1 to 10 bind values. This will work if most of the queries use those.

  • What is the difference between reset and adobe reset??

    what is the difference between reset and adobe reset??

    Reset and Reset (Adobe) will have the same effect unless you have changed the defaults.
    For raw files LR uses its own defaults as the starting point for developing an image. For example, if you don’t apply your own import preset the standard default settings under detail are:
    Sharpening:
    Amount 25
    Radius 1.0
    Detail 25
    Masking 0
    Some users like to adjust these and make the tweaked settings into their own defaults. After making the desired adjustments in Develop simply hold down Alt and the reset button changes to Set Default.
    Clicking the button will save the new default settings. This can be useful if you have more than one camera and wish to use different defaults for each.
    To get back to the standard defaults simply hold down shift and click Reset (Adobe)
    Restore
    You can also restore the default settings globally in the develop module from the top menu:
    Develop >> Set Default Settings
    Then click the button "Restore Adobe Default Settings"
    The standard defaults will then apply again to all future imports. For photos already in the catlaog where a non-standard default has already been applied you would need to adjust them manually using Shift+Reset (Adobe) but after adjusting one, it is then possible to sync all the others.

  • Partition Table Looks Different Between OSX and Windows 7

    Hey all,
    I recently replaced the hard drive on my 2007 iMac, going from the 320GB drive to a 1 TB drive. It actually worked! The previous drive was failing in very odd ways, though booting into the Windows side (more on dual boot later) always seemed to work, and S.M.A.R.T. always reported that the physical drive seemed OK.
    The previous drive (320 GB) had around 200GB devoted to OSX and 100GB partitioned off for a working Windows 7 installation (custom installed x64 Win7 Ultimate). I had the Windows system image backed up to my NAS, and had a Windows system bootable disc to restore that image.
    After replacing the drive (and almost crying that I had actually done it right), I first restored OSX from a Time Machine backup, and let it take the full 1TB of space as Journalled HFS+. Then, I used Disk Utility to shrink OSX down to 500GB, and created a second partition (formatted to NTFS) with the remaining 500GB.
    Now, restoring a Windows system image is an odd thing, as it tries to do a lot of partition work as opposed to simply restoring the Windows install to a partition. I tried Macrium Reflect first (made a backup in that, too), and it looked like it was going to let me restore to the second partition. It completed the restore...and the entire hard drive was hosed. Partitions had been moved, renamed, resized, and nothing was bootable. I had to use Recovery from an external USB thumb drive to go back to the single, full-drive install of OSX.
    Then I tried again. Made the second NTFS partition and used the basic Windows System Restore disk to restore from the standard system image I had on the NAS. I was not expecting this to work. But it did. Windows started showing up in Startup Manager when "option" was pressed on bootup, and both OSX and Windows booted properly and ran fine. This is where I (finally) get to the supreme oddities:
    OSX Disk Utility still reports two 500GB partitions, one for OSX and one for Windows.
    In OSX the Windows partition shows as having NO DATA on it. Not sure what would happen if I tried to write a file to it when mounted, but there is no data on it when viewed from OSX (I was always able to see the Windows files when I mounted that partition on the previous drive).
    The Windows partition does not show up as a valid bootable system in System Prefs --> Startup Disk (naturally, I suppose, since OSX doesn't think there is anything there).
    From the WINDOWS side, Windows still sees the old partition table: 200GB for the "unknown" HFS partition, and then the rest of the space can be devoted to Windows (started as 100GB, but I was ablt to expand it to use the remaining ~750GB!).  Windows thinks it can have 750GB of space even though I know its partition is only 500GB in size!
    Windows cannot see the OSX HFS partition data using HFSExplorer. It CAN see the HFS partition on the attached backup drive (the drive I use for Time Machine).
    GParted (a partition program on a Linux bootabld CD-ROM) shows the same partitions as OSX Disk Utility (2x500GB), and also thinks the Windows NTFS partition is empty (all space reports as "unused").
    Did I mention both OSX and Windows work fine???
    There are, of course, two other partitions on the drive: the first partition is the 200MB one I always see (EFI/GUID portion?), and then between the HFS and NTFS partitions is the 600MB recovery partition (which also shows at option-pressed boot time). OSX, GParted, and Windows see all four partitions, and in the same order. It is just that Windows sees the wrong sizes, and OSX cannot see any data in the Windows partition.
    Surely this is all going to break spectacularly at some point, isn't it? What if I ever did write a file to the Windows side from OSX, or what if OSX starts taking more space than the 200GB Windows thinks is the max for that partition? What if I try to make Windows use more than 500GB because it thinks it has almost 800GB to use? What if I defrag the Windows drive?
    I had no idea a partition table could look this goofy and yet still have everything be bootable and workable. Is there something I can do to get everything in sync? Basically, I am assuming I need to get Windows to do some low-level kung fu in Disk Manager in order to properly get everything lined up with the "right" partitions as reported by both GParted and OSX Disk Utility. But how do I do that?
    By the way, any ideas that totally nuke the drive and start from scratch are completely fine (if it seems like they are doing something different enough that I'd give it a try). I have good backups of both OSX and Windows and have restored them about a half dozen times already as I dealt with the previous failing hard drive and with trying to get dual-boot working again. Not to mention, this iMac is now my secondary machine to the new Mac Mini I got a couple weeks back when I wasn't sure how much more life I was going to get from this 6+ year old iMac.
    Thanks for listening to me ramble about this very odd issue, and a huge THANK YOU in advance to anyone who has ideas to help.
    Thanks,
    sutekh138

    Update:
    I am pretty sure the issue is a simple GPT/MBR discrepancy.
    I installed rEFIt and used it's partitioning tool (gptsync built in) upon bootup. It was able to show the GPT table and the MBR table, but it thinks the second partition of the drive (the Mac OSX bootable partition) is "extended" in the MBR table and says "will not touch this disk."
    However, it does look like an MBR sync should be straightforward, as there four partitions in the GPT table and four in the MBR (and MBR allows a max of four, AFAIK). I just need gptsync to relax some rules. I found a link to a supposedly newer version of gptsync compiled for OSX, so I will try that later.
    First, I will try Partition Wizard, a free tool I found for the Windows side. It has a "Repair MBR" option that I would have tried last night if I weren't running a new Windows Image Backup in case all of this goes haywire.  *smile*  The PW tool also has an option to change the MBR over to GPT entirely. That might work, but then I am not sure Windows 7 will boot (from what I read, x64 Win7 running on EFI-enabled hardware should work, but who knows).
    Anyway, I will try the following things, in order, until something works, when I get home tonight:
    From Windows, run Partition Wizard and try "Repair MBR".
    From OSX, download recent gptsync and try to run it.
    From Windows, use Partition Wizard to do a full MBR --> GPT conversion.
    Nuke the Windows partition in OSX Disk Utility, expand the HFS partition to take up the whole drive, and then add a Windows-bootable partition via Boot Camp-ish command line commands (diskutil). Because if nothing else works, I have to assume I just created the partitions wrong in the first place such that a Windows restore miraculously works, but the partition weirdness is just a timebomb waiting to happen.
    Finally, if none of the above work, I'll just get things back to the way they now work and wait for the timebomb to (possibly never) go off.  *smile*
    I'll update this thread if I get something figured out, in case anyone else stumbles upon it...
    Thanks,
    sutekh138

  • Master control attribute value discrepency between Master and child org.

    Hi Guru,
    We are facing a strange issue in Track install Base Attribute values. There are some 60K item having discrepency in the value of the this attribute between master and child.
    We are wondering how it happens as this attribute is master controlled one and we never changed this attribute control and kept as Master controlled. The master value is true
    If you guys experience this issue, please let us know the solution that you had applied to fix this issue.
    regards
    venkat

    Try executing the vo1 query before setting the bind variable for vo2, then execute the vo2 query (if that's what you want to do).

  • Table for relation between WIP and Production Order

    Dear All,
    Please provide me table having relation between Production Order Number and WIP for it.
    Regards,
    Sachin

    http://www.sap-img.com/
    Free ABAP eBook Download
    SAP MM, SD, FI, PS, PP, PM, HR, System Tables
    Regards,
    Rajesh Banka

  • Wich is table for match between Infoprovider and update with technical name

    Thanks in advance!
    Bye!
    Ferdinando

    Hello ,
       You can check table --> RSUPDINFO table for Update rules with tech ID between Cube and InfoSources.
    and other ref tables are --> RSUPDROUT / RSUPDDAT / RSUPDKEY /
                --EnjoySAP
    **Award credits if you are done with my answer

  • Which Table for linkage between Opportunity and Campaign

    Hi,
    can anyone tell me the database table which links Opportunity´s and Campaigns?
    The campaign number is shown in Opportunity in the following field:
    Structure  CRMT_5010_1O_UI       
    Field name CAMPAIGN_HE_ID    
    Thanks for any hint!

    the above is right... but you would not find the objects directly.  opportunity and campaign would be identified as Role A & B in table srelroles.  
    The object guid, logical system and business object type forms a unique identifier for an object and defined as a Role.

  • What is the difference between Brackets and Adobe Edge Code?

    Adobe Edge Code is a distribution of the Brackets open source project optimized for professional web designers and developers. This build of Brackets includes community and Adobe-built extensions that are not part of the Brackets open source project. If you are a Creative Cloud member, this is version is made special for you.
    But, we're just getting started. Currently we have support for the free Adobe Edge Web Font service. The next release will add support for previewing directly on devices as you develop with Edge Inspect CCM and we'll be adding more integrations over the next few months.

    Hi Chitra,
    In simple term:
    SU53: Authorization i dont have
    SU56: Authorization i have
    Further information pls check this
    diff in su53 and su56

  • Display discrepancy between PS and Lr / ACR

    On the discussion forum of the french magazine Chasseur d'Images, someone submitted a display discrepancy with Photoshop & Lightroom.
    The example was a grey chart. If I open the file in both Lr and ACR 4.1, there is no differences between them - of course - but there is a quite strong pink cast. If I open it in Photoshop, the cast isn't there, even if select Prophoto RGB as working space.
    Any clue ?
    Gilles.

    Could it be related to the issues described in this (long) thread?
    Uli Oertel, "Color management bug?" #1, 7 Mar 2007 1:34 pm
    Disappointingly, despite the fact that multiple persons have confirmed the behavior mentioned there, and I (among others) have sent a bug report to Adobe, there has been *zero* feedback. A simple 'we're looking into it' would have been a good start.
    As it stands, I have no clue whether it's actually worth my time to provide Adobe with a good, detailed bug report. For all I know, the server redirects these reports to /dev/null.
    Simon

  • LiveCycle and Adobe Reader

    Is there an update to allow people to open
    LiveCycle Forms in Adobe Acrobat Reader 9?
    I have made a form but when I publish it, it can only be edited and saved in Reader 8.0 or later and all of the other people who need the form have been update to Reader 9.0. I need tyo be able to open the form and edit in 9 or higher.
    Any help would be great!!
    Thanks!!

    There is a registry setting that determines what is your default viewer. You can either reinstall Acrobat (the last one in sets the setting) or you can modify this registry key to point to your Acrobat exe file:
    HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe
    If it's not there create a string value and point it to which exe you want to launch
    For example: "C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe"
    Hope that helps
    Paul

  • Masters not applying to pages, discrepancy between design and preview mode

    Hi there,
    I am having a crazy time with Muse, please please help me... I see some of you have looked at the post, but no help yet. Please don't let me down. SOOO confused!
    1) Master pages are not fully applying to the pages I assign, only parts of them.
    Above you can see that the sub-pages and the "WORK" page all have the C-Master applied to them, but then you look at one of those pages and not all of the features are there.
    Above is the C-Master page
    Above is one of those sub-pages (coffee tables) with the C-master applied, yet the navigation menu is missing!?!?
    2) Also the formatting is completely on the third image is completely wrong. There is extra space at the bottom of the page and yet I cannot move the page toggles to be the same as it is on the master. These formatting/margin/page size issues run throughout my pages and I cannot get them to all be the same! HELP!
    3) The page looks different in the design mode than it does in the preview mode.
    I am so confused and have gone through this from scratch once before thinking I did something wrong but I have had the same result.
    Please help me!!!
    Thank you!!
    - Carly

    Hi Parikshit,
    The sticky footer sounded promising, but it didn't change anything. I still can't move those bottom toggles to be at the desired ruler mark.
    As for the margins... Its my understanding that whatever you have in a master page will be applied to the pages you assign, but the content and spacing is different. There is no content that would push the page to extend further down, which I have seen done before. And because I cannot individually move the toggles I have no way of adjusting the spacing. I am going for a seamless look between pages, where the size and content of the page remains the same while the images in my portfolio change.
    Even if I go to Page > Page Properies and try to enter the correct numbers, it still doesn't affect the page.
    Does that clarify?
    Also, I am running 7.1 on a Mac OS 10.9...does that have something to do with it?
    Thank you so much for responding!
    - Carly

  • Problems with LiveCycle and Adobe Reader x

    I recently had Adobe Reader X installed on my computer, and now when I use the Preview tab in LiveCycle the form opens in Reader X. I would like the form to open in Acrobat 9 Pro as it did before. How do I change that?
    Regards,
    Kirstine

    There is a registry setting that determines what is your default viewer. You can either reinstall Acrobat (the last one in sets the setting) or you can modify this registry key to point to your Acrobat exe file:
    HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe
    If it's not there create a string value and point it to which exe you want to launch
    For example: "C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe"
    Hope that helps
    Paul

  • Difference between Export and Adobe PDF presets..?

    Hi,
    It is possible to export a PDF from InDesign (CS3) using both the Export menu and the Adobe PDF Presets menu (both are sub-menus under File)
    Technically they seem to do exactly the same thing, both allow you to use predefined presets to export your PDF.
    What I am wondering is, are there any differences between the two? And if so, what are they?
    Any help would be appreciated, thanks!

    PDF Presets are what they are Presets. You may get a joboptions file from someone to use and use the PDF Presets to load the joboptions (pdf options) file into the Presets.
    Then they become available in the Export Options.
    Alternatively you can go into the PDF Presets and then choose to Save one of your presets to file, then email that or give the file to someone else to load onto their computer in their version of InDesign.
    This way you can both have the same PDF export options.
    But the presets are just a way to create, save, load and edit profiles that are available when you go to Export to PDF.

Maybe you are looking for