Table maintenance for HRUS_D2 missing in SRM 7.0

Hi All,
The table maintenance for HRUS_D2 is missing in SRM 7.0. Is there any other other way of maintaining substitue on a large scale by an administrator.
i know we can assign substitute form portal , but initially we want some substitute set in the system and currently i cannot maintain this table HRUS_D2. The table maintenance is active in ECC system but not in SRM system.
Any help or oss note would be appreciated.
Thanks
Iftekhar Alam

Hi Masa,
The report mentioned is useful if we have to set substitution individually. i wanted to do in a mass way for 100-200 users and SM30 for HRUS_D2 would have helped.
Not sure why SAP provide the table maintenance in ECC but not in SRM.
I have got a FM RH_UPDATE_SUBST_LIST_SERVER which i can use to update the substitution table in a mass way and it worked.
Thanks
Iftekhar Alam

Similar Messages

Error in creating Table Maintenance for TABLES: J_2IRG1BAL ,Dump error show

Dear Gurus
I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No.    Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
*Dump Error Shows in Production*
Runtime Errors         SYNTAX_ERROR
Date and Time          11.12.2008 09:26:30
What happened?
|    Error in ABAP application program.
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
rigger Location of Runtime Error                                                                 |
Program                                 SAPLSVIM
Include                                 LSVIMU01
Row                                     107
Module type                             (FUNCTION)
|    Module Name                             VIEW_MAINTENANCE
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
105
Initialisierung des Abgleichsmandanten zum View                     *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client   = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
| 110|            USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.

I have send you all the details regarding the table maintenance generator
error is shown below
                                       I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No.    Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
                                                                                Runtime Errors         SYNTAX_ERROR
Date and Time          11.12.2008 09:26:30
ShrtText
Syntax error in program "SAPLJ1I5 ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Trigger Location of Runtime Error
Program                                 SAPLSVIM
Include                                 LSVIMU01
Row                                     107
Module type                             (FUNCTION)
Module Name                             VIEW_MAINTENANCE
Source Code Extract
Line
SourceCde
77
TRANSPORTING NO FIELDS.
78
IF sy-subrc NE 0.
79
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
80
IF sy-subrc NE 0.
81
RAISE no_editor_function.
82
ELSE.
83
length = strlen( function_name1 ).
84
ASSIGN function_name1(length) TO <function_name>.
85
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
86
IF sy-subrc NE 0.
87
RAISE no_database_function.
88
ENDIF.
89
ENDIF.
90
INSERT x_header-viewname INTO alr_checked_views INDEX sy-tabix.
91
ELSE.
92
length = strlen( function_name1 ).
93
ASSIGN function_name1(length) TO <function_name>.
94
ENDIF.
95
96
Initialisierung der RFC-Destination zum View                        *
97
98
FPOOL+4 = X_HEADER-AREA.
99
fpool   = x_header-fpoolname.
100
vim_default_rfc_dest-viewname = x_header-viewname.
101
vim_default_rfc_dest-rfcdest = rfc_destination_for_upgrade.
102
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
103
USING 'VIM_DEFAULT_RFC_DEST' 'C' vim_default_rfc_dest rc.
104
105
Initialisierung des Abgleichsmandanten zum View                     *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client   = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
110
USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.
111
112
set flag if complex selection conditions in sellist                  *
113
114
IF complex_selconds_used NE space.
115
READ TABLE dba_sellist INDEX 1.
116
IF sy-subrc EQ 0 AND dba_sellist-cond_kind EQ space.
117
dba_sellist-cond_kind = 'C'. MODIFY dba_sellist INDEX 1.
118
ENDIF.
119
ENDIF.
120
121
direkter Vergleich: Flagge setzen usw.                              *
122
123
IF view_action EQ vim_direct_upgrade.
124
view_action = aendern.
125
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
126
USING 'VIM_SPECIAL_MODE' 'C' vim_direct_upgrade rc.

How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0?

Hi,
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0? Please let me know.
Thanks,
Monica

Hi,
In SRM for all objects like SC ( BUS21210),BID,PO(BUS22010),Confirmation (BUS2203),invoice etc all the data stored
in BBP_PDHGP and BBP_PDBEI tables only, These is no separate tables..
for your reference below are the few SRM tables
BBP_PDACC Account Assignment
BBP_PDATT Document Attachment
BBP_PDBEH Backend Specific Header Data
BBP_PDBEI Backend Specific Item Data
BBP_PDBGP Partner Extension Gen. Purchasing Data
BBP_PDBINREL Transaction Object Linkage (EBP)
BBP_PDHCF Set for Tabular Customer and Solution Fields on Hdr
BBP_PDHGP Business Transaction Purchasing Information
BBP_PDHSB Bid Invitation
BBP_PDHSC Header Extension for Customer Fields
BBP_PDHSS Hdr Extension for SAP Internal Enhancements (IBUs and so on)
BBP_PDICF Set for Tabluar Customer and Solution Fields on Itm
BBP_PDIGP Business Transaction Item-Purchasing Information
BBP_PDISB Bid Invitation/Bid-Specific Item Data
BBP_PDISC Item Extension for Customer Fields
BBP_PDISS Item Ext. for SAP Internal Enhancements (IBUs and so on)
BBP_PDLIM Value Limit
BBP_PDORG Purchasing Organizational Unit
BBP_PDPSET Further Procurement Information
BBP_PDTAX Tax
CDCLS Cluster structure for change documents
CDHDR Change document header
CDPOS_STR Additional Change Document - Table for STRINGs
CDPOS_UID Additional Table for Inclusion of TABKEY>70 Characters
CRM_JCDO Change Documents for Status Object (Table JSTO)
CRM_JCDS Change Documents for System/User Statuses (Table JEST)
CRM_JEST Individual Object Status
CRM_JSTO Status Object Information
CRMD_LINK Transaction - Set - Link
CRMD_ORDERADM_H Business Transaction
CRMD_ORDERADM_I Business Transaction Item
CRMD_PARTNER Partners
SROBLROLB Persistent Roles of BOR Objects
SROBLROLC Persistent Roles of Business Classes
SRRELROLES Object Relationship Service: Roles
Thanks & Regards,
Prasad S

How to validate data entered in table maintenance for Z table?

Hi,
I created a Z-table with table maintenance. I'd like to perform some validation on the entered data.
I know there are events for these : "If this pre-defined time is reached in extended table maintenance, the FORM routine specified for the current view and for this time is processed. This is useful, for example, for performing consistency checks before saving or specific actions when creating new entries."
I also found some info in the Online help:
http://help.sap.com/saphelp_47x200/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
However it's not clear which event I can use for validation.
I tried event 01, however when I added a message, in the SM30 in case of message, I got the SM30 initial screen.
Do you have any example about validation?
Thanks in advance,
Peter

Hi,
Once you are on the table maintenance generator screen.
GOTO --> Enviornment --> Modification --> Events.
Here specify Event as '01' and the Subroutine name that will hold the data for the validation.
As you know we need to specify a function group.
GOTO SE80 and Open your function group.
Now in the PBO of the screen write a subroutine for the validation before saving an entry in the table.
Refer the code below for validation.
*&      Form F9000_CHECK_BEFORE_SAVE
      Subroutine called dynamically to check values before saving
FORM f9000_check_before_save.
TYPES : BEGIN OF ty_flmt,
          zz_flmt_type     TYPE zz_flmt_type,
          zz_gsm_flmt_code TYPE zz_flmt_code,
          END OF ty_flmt.
Internal Table
DATA : lit_flmt_code TYPE TABLE OF ty_flmt,
         wa_flmt_code LIKE LINE OF lit_flmt_code.
DATA: lv_subrc TYPE sy-subrc VALUE '0',
        lv_tabix TYPE sy-tabix,
        lv_total_rec TYPE i,
        lv_rec       TYPE i,
        flg_upd      TYPE flag.
DESCRIBE TABLE total LINES lv_total_rec.
LOOP AT total.
    lv_tabix = sy-tabix.
    READ TABLE extract WITH KEY total.
    IF sy-subrc EQ 0.
      IF extract+3(10) IS INITIAL.
        DELETE total.
        DELETE extract INDEX sy-tabix.
       DELETE extract INDEX lv_tabix.
        lv_subrc = '4'.
        flg_upd = 'X'.
        MESSAGE s119(zcrm_appl) DISPLAY LIKE 'S'.
        SET SCREEN 0.
      ENDIF.
    ENDIF.
    wa_flmt_code-zz_flmt_type = total+13(3).
    wa_flmt_code-zz_gsm_flmt_code = total+16(10).
    APPEND wa_flmt_code TO lit_flmt_code.
ENDLOOP.
IF flg_upd IS INITIAL.
    SORT lit_flmt_code BY zz_flmt_type zz_gsm_flmt_code.
    DELETE ADJACENT DUPLICATES FROM lit_flmt_code.
    DESCRIBE TABLE lit_flmt_code LINES lv_rec.
    IF lv_total_rec <> lv_rec.
      LOOP AT extract.
        READ TABLE total WITH KEY extract.
        IF sy-subrc EQ 0.
          DELETE total INDEX sy-tabix.
          DELETE extract INDEX 1.
          lv_subrc = '4'.
          MESSAGE s289(zcrm_appl) DISPLAY LIKE 'S'.
          SET SCREEN 0.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
sy-subrc = lv_subrc.
ENDFORM.
<b>Please reward points and close the thread.</b>
Regards,
Amit Mishra

Find Transparent table name for correspoding Dictionary Structure SRM 7.0

Hi,
I am not able to find Transparent table name for correspoding Dictionary Structure in Webdynpro Component for a field in SRM 7.0.
Please let me know.
Thanks,
Monica

Hi Monica
please tell the transaction name and the name of field seen in webdynpro
regards
andrea

Restrict table maintenance for a Z Table in SM30 in Test systems

Hello,
I have 2 Z tables ZTAB1 & ZTAB2 which has table maintenance created. Both tables should be non modifiable in Test systems but should be able to make entries in DEV system.
This means any entry that needs to be present in PROD or TEST systems for these tables should be moved through transports from DEV only.
The Tables are defined as follows:
The Delivery Class in Both Tables is 'C' and both table. In the table maintenance screen, the authorization group for ZTAB1 is ZT1 & for ZTAB2 is ZT2. The Authorization object is S_TABU_DIS for Both tables.
ZTAB1 has 2 screens for maintenance and ZTAB2 has 1 screen for maintenance.
The recording routine is "Standard recording routine" for both tables.
The Problem is as follows:
In TEST system, In SM30 for table ZTAB2, when I click Maintain I get an error message "Client XXX status is 'not modifiable' " which is correct. That means we cannot modify the entries for this table in TEST system.
However for table ZTAB1, I am able to change the table entries through SM30.
Could anyone suggest how to restrict for making entries in table ZTAB1 in SM30.
I debugged SM30 for both tables & found that the SM30 program checks for an entry in OBJH table with the table name as OBJECTNAME and if the OBJCATEGORY in OBJH is equals 'CUST', it throws error message "Client XXX status is 'not modifiable' ".
For the problematic table ZTAB1, the OBJH entry has 'APPL' and that is why we dont get the error message and the table entries are editable in SM30.
(The transaction SOBJ can be used to changes OBJH entries. I haven't used this before. Not sure if I can use it to correct the problem.)
Can anybody tell me how this OBJH gets populated when we create a Z table?
Could anyone suggest how to restrict for making entries in table ZTAB1 in SM30.
Thanks,

APPL stands for the Delivery Class A (Application Table)
CUST stands for the Delivery Class C (Customizing Table) in table OBJH.
It seems, the delivery class for the ZTAB1 has been changed from A (Application) to C(Customization). Try to delete the Table maintenance and regenerate it again.
Regards,
Naimesh Patel

Dump while Accessiing Table maintenance for Table P44V thru SM30

Hi,
I need to insert an entry into P44V table thru table maintenance (SM30).
But, when I try to access this, run time error is coming sayig "DYNPRO_NOT_FOUND"
Error analysis
The system attempted to use dynpro 0001 in program "SAPLWIS_PLAN_C".
This dynpro does not exist.
Can you please let me know, how can I solve this issue.
Thanks,
Sandeep

GOTO se11 open your table and regenerate the screen for the Table Maintenance Generator...

Table maintenance generator for a custom table

Hi All,
I have a requirement.
I had created a custom table with 5 fields with partner_id as the key field.
I had generated the table maintenance for this.
But, when i maintain via sm30, the maintenance screen should display 7 fields, i.e
for the partnerid, the firstname and the lastname has to be display as the second and third column.
So, in the maintnenace screen sm30, i should have 7 fields display... but actually in real custom table, there will be only five fields (except firstname and lastname of partner).
Please guide me how to do this development.
Do i need to change the code generated via table maintenance and add these two fields in the table control and code to retreive the values for the firstname and lastname.
Please help me.
Thanks,
Jaffer ali.S

it is not a wise idea to add your custom fields in standard sap table maintenance generator screens..
each time you do a re - generate, (in case you added a new field in the table, or changed a data element, ) you will have to regenerate your tabe maintenance generator, and you will lose your code...
in this case, it will be better to create a custom screen with these fields and write code to populate the table..
or to make it easy, create a maintenance view with all fields required,

Data Maintenance For Pooled Table

Hi,
I have to make table maintenance for pooled table T052S , Can I make table maintenace , if I have access key, is it feaseable, as I have some requirement , which is to be done. or is there any other method by which user can maintain this table except through SPRO.
thanks
bobby

We're on ECC 5.0 here and this table already has a maintenance transaction defined - OBB9.
This is how SAP sets up maintenance for a lot of the config tables:
     Define a Maintenance View - e.g. V_T052S
     Define a Maintenance Dialog
     Define a transaction variant on SM30
A user can be given maintenance access for only OBB9

Authorization group for table maintenance view

I need to create table maintenence view for a custom table, client provide name for auth. group, but no clue how to create auth. group.
can someone provide the steps to do this?

Hi,
Follow below steps to create table maintenance for a table and to assign authorization group to a table:
step1: Go to SE11 enter the table name
step2: In the standard toolbar you will find UTILITIES
Go to UTILITIES -> TABLE MAINTENANCE GENERATOR
You will go to first screen of Table maint. gen.
Here you will find to enter authorization group.
Thanks and Regards,
Shravan G.

How to get Tcode for table which has a table maintenance done

Hi Friends,
I have one issue.
How to get the specific Tcode again for the table to which i have used table maintenance .
I have generated table maintenance for many tables inside my package.
If i want specific Tcode for that particular table how do i find it...Is there any way to get that
Thanks in advance.
Regards
kishore

Hi Gautham,
I am still having problem... If i give Z* it shows all the Tcodes created with Z.
For that i will click Display object list and get my Tcodes inside my package..
But that is not my issue...
I am sorry if i didn get you properly
But still i didn find any way for that.
Will give one sample table which is Ztest. Ihave tcode ztest1.
Now as u said if i give Z* i will get all Z* tcodes ..In TSTCP table if i execute iam getting only the Tcode fields
lot of Z names(tcodes) are there. In that how will i find which is mine.I am not getting any parameter fied in output and all..
please help me.
Regards
kishore

Currency field in Table maintenance generator

Hi,
I have created a table with fields amont and currency..When I create generate the table maintenance for this table I am not able to see currency and amounts field on the generated screen. Please do help me whats missing from my end.
raghu

make the foriegn key for the currency TCURC
This was for those whose currency keys are not maintained
Resaon might be the Currency is not maintained in the table TCURC
they can be maintained in SPRO
SAP Netweaver - > General Setting - > Currencies - > Check Currency Codes
Regards
- Gopi

Fieldname in not being displayed in the table maintenance

Hi Experts,
I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
plz help.
Thanks n Regards,
Mukesh

Hello Mukesh,
As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
If you are assigning the data element and the field label is empty, then + sign will come. In other case - if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
In both the above cases, you can change the column header manually in the layout.
Regards,
Selva K.

Events in Table Maintenance, modify record and new record checking.

Hi,
I need to have a checking in the table maintenance for a custom Z table.
1.) First requirement is to check the changed data of an existing entry. An error must occur when pressing enter or when pressing the save button. What event should I use in order to accomplish this task?
2.) Second is when creating a new entry. An error must also occur when saving. I have already created the error message but my problem is that it does not return to the table maintenance screen but rather exits SAP.
Please advise on what to do regarding these matters.
Edited by: Al Vincent Bulacan on Mar 17, 2009 12:55 PM

Follow the given path
go in se11 to the Table Maintenance generator.
Envireonment --> Modification --> Events.
Here you will find a number for events. You can choose the one that fits your requirement.
Then you can create an Perform in the selected event and get your requirements done.
Hope it helps,
- RJ

Abap WebDynpro: Table Maintenance Generator ??

...in ABAP Dictionary there is a tool for generating Table Maintenance for classical "Screen Painter" Dynpro. Is there (or will there ever be?) a similiar tool for generating Table Maintenance for WebDynpro ?

Have a look at [this|"Table Maintenance Generator" for WD4A?; thread - nothing new until now afaik.
Regards,
TW

Table maintenance for HRUS_D2 missing in SRM 7.0

Similar Messages

Maybe you are looking for