Table of Contents incorrect running times
I'm using Captivate 5 to create a module with slide video and lots of other video clips integrated into frames. The Table of Contents is providing inaccurate running time information about the slides. Much of the video seems not to be registering when it runs. Here's a link to an online preview version of the module.
http://www.paaap.org/headbumpsmatter/Headbumpsmatter.htm
Any way to correct this problem?
Dan
[email protected]
Yes, thanks for the clear description of my problem. Your description hints at the solution. I was able to get the Table of Contents to show the correct running times for the slide and the project by manually lengthening the slide running time to match the actual length of the slide. It didn't register correctly when I had a combination of slide audio (narration) and inserted video. The slide would play the audio and then the video as set up in the timeline for the slide but would only record the running time up until the video started. By adding up the the audio and video and them manually changing the length of the slide in the timeline, I got the TOC to show the correct times. Thanks for your help,
Dan Huber
Similar Messages
-
Business Content Activation - run time error
Hi guys,
We were at plugin 2002.1. We installed PI 2002.2 and PI 2003.1 on top of it.
After the plug-in upgrade, we are at support pack 9 for SAP-BW and 13 for BI-Content. For aba and basis, we are at 620 and support pack 32.
As part of the regression testing after the 2003.1 plugin upgrade, we found out that the business content activation abends with the following run time error.
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Looks like it is trying to insert into table RSOLTPSOURCEFIET and the row already is existing. I thought the activation process is supposed to update something if it is already out there.
If we just select the 'only necessary', the activation goes through ok, but if we select 'before and after in the data flow', we get this abend.
Any clues???
Best regards,
makaleemHi Seow,
This is how I resolved it. I looked at the ST22 closely and one of the messages indicated that the number range is missing in tran SNRO for an infoObject. I created an entry for that infoobject using SNRO and tried activation and it worked.
When we created an OSS for SAP to look into it, they recommended the following two things. I tried these two but it did not work. I am mentioning them below just in case they may help you.
1) Sometimes there is inconsistency in the content cache when trying to activate objects and we have to delete the repository cache. To delete the repository cache, go to RSA1 ---> Business Content -
> Extras ---> Delete Rep Cache
2) Execute SAP_DROP_TMPTABLES program for types 1,2,3 and 6.
If this helps, don't forget to assign points.
Abdul -
How to change property file contents during run time?
Hi everyone. First post so go easy on me please.
I have a couple of properties that I want to read from a from a file. To achieve this I simply use:
ResourceBundle.getBundle("my.package.MyItems").getString("MyProperty");
This works like a wonder. The problem is, i want to change the property "MyProperty" during runtime. I've found the properties file (MyItems.properties) inside weblogic, but if a change its contents it does not reflect in the application.
I can come up with a couple of justifications:
* I'm not looking in the right folder/changing the wrong file in the server;
* Weblogic caches the properties file, meaning that I have to redeploy the project (defeating the purpose of actually having a properties file).
Can anyone help with this one?
[EDIT] Forgot important info:
* JDeveloper 11.1.1.4
* Weblogic 11.3 (not 100% sure)
* Both JDev and WebLogic running on Windows 7 64 bits
Thank you in advance!
Best Regards
J. Peixoto
Edited by: 868634 on Jul 12, 2011 9:37 AM
Edited by: 868634 on Jul 12, 2011 10:21 AM
JDeveloper 11.1.1.4, not 3I tried it all.
Just an explanation of my context.
I have 1 application with 2 projects in it. First project is called "CommonUI_ViewController" and the second one "FO_ViewController".
The properties file I'm trying to change is located inside "CommonUI_ViewController", in package "PropertiesConfig" and the file is called "PhaseListener.properties".
"FO_ViewController" is dependent on "CommonUI_ViewController". When I run "FO_ViewController" the integrated weblogic server log shows this (among other things):
[10:25:55 AM] Wrote Web Application Module to D:\JDeveloper\dump\system11.1.1.4.37.59.23\o.j2ee\drs\SPV_BPM\FO_ViewControllerWebApp.war
[10:25:57 AM] Wrote Web Application Module to D:\JDeveloper\dump\system11.1.1.4.37.59.23\o.j2ee\drs\SPV_BPM\CommonUI_ViewControllerWebApp.war
Note: both lines above point to folders. "FO_ViewControllerWebApp.war" and "CommonUI_ViewControllerWebApp.war" are NOT war files, but folders that have that name.
I tried changing the properties file in the following locations:
* D:\JDeveloper\dump\system11.1.1.4.37.59.23\o.j2ee\drs\SPV_BPM\FO_ViewControllerWebApp.war\WEB-INF\lib\adflibSPVCommonUI.jar > PropertiesConfig\PhaseListener.properties;
* D:\JDeveloper\dump\system11.1.1.4.37.59.23\o.j2ee\drs\SPV_BPM\CommonUI_ViewControllerWebApp.war\WEB-INF\lib\adflibSPVCommonUI.jar > PropertiesConfig\PhaseListener.properties;
* D:\JDeveloper\dump\system11.1.1.4.37.59.23\o.j2ee\drs\SPV_BPM\CommonUI_ViewControllerWebApp.war\WEB-INF\classes\PropertiesConfig\PhaseListener.properties (no need to open any jar/war to get to this one).
I changed all these files with different values but no change was shown in the application (using the method in the previous post).
I believe that I'm still doing something wrong :/
Thank you for your help so far vinod_t_krishnan!
J. Peixoto -
How to change the Table name during the Run Time
Hi
I have to generate a Oracle Developer/2000 report.
The input paramater is Vendor ( Ex:- Aetna,Cigna,BCBS...)
If the input paramater is Aetna then the table report should use is Aetna_Emp_Data or
If the input is Cigna then The table is Cigna_Emp_Data.
The Layout and fileds selected for the report remains the same.
Please let me know !
Regards
Kiran Ravuri
WorkscapeWhy don't you check with you co-worker Goran he has done this.
-
A dynamic table based on run-time created view object -- please help!
Hello!
I'm trying to create a dynamic table based on an run-time created view object. All go ok, but table binding component take the first view/iterator state and don't reflect changes they have. Please, take a look:
1. At run-time the view is being replaced by new red-only one based on query in application module:
getQueryView().remove();
createViewObjectFromQueryStmt("QueryView", statement);
2. Page definition file contains an iterator (using iterator or methodIterator - doesn't matter) binding and table, which binds to the iterator, like:
<methodIterator id="distributeQuery1Iter" Binds="distributeQuery1.result"
DataControl="QueryServiceDataControl" RangeSize="10"/>
<table id="distributeQuery11" IterBinding="distributeQuery1Iter"/>
3. The page code uses <af:table>. But, if I use table binding (it's right) like this:
<af:table var="row" value="#{bindings.distributeQuery11.collectionModel}">
<af:forEach items="#{bindings.distributeQuery11.attributeDefs}" var="def">
the table will never changed (i.e. still show the first view instance).
When I tried to use iterator binding directly (it's bad and cannot provide all needed features unlike CollectionModel from table binding) I saw that table works!
(Code is somehing like:
<af:table var="row" value="#{bindings.myIterator.allRowsInRange}">
<af:forEach items="#{bindings.myIterator.attributeDefs}" var="def">
Why the table binding do not reflect changes in iterator? Or should I use different approach?
Thanks in advance!
Ilya.I got it to work! I used a hybrid approach comprised of some of your code and some of Steve Muench's AcceessAppModuleInBackingBean example.
In the setBindings method, I execute an app module method that redefines the query, then I used your code to delete and recreate bindings and iterator:
public void setBindingContainer(DCBindingContainer bc) {
this.bindingContainer = bc;
rebuildVO();
The rebuildVO() method looks like the code you provided in your example:
private void rebuildVO() {
DCDataControl dc;
DispatchAppModule dApp;
DCBindingContainer bc;
DCIteratorBinding it;
OperationBinding operationBinding;
ViewObject vo;
DCControlBinding cb;
try {
bc = getBindingContainer();
dc = bc.findDataControl(DATACONTROL);
dApp = (DispatchAppModule)dc.getDataProvider();
// Execute App Module Method to rebuild VO based upon new SQL Statement.
dApp.setDispatchViewSQL();
vo = dApp.findViewObject(DYNAMIC_VIEW_NAME);
it = bc.findIteratorBinding(DYNAMIC_VO_ITER_NAME);
it.bindRowSetIterator(vo, true);
// logger.info("Remove value binding...");
cb = bc.findCtrlBinding(DYNAMIC_VIEW_NAME);
cb.getDCIteratorBinding().removeValueBinding(cb);
bc.removeControlBinding(cb);
// logger.info("Creating new value binding...");
FacesCtrlRangeBinding dynamicRangeBinding =
new FacesCtrlRangeBinding(null,
bc.findIteratorBinding(DYNAMIC_VO_ITER_NAME), null);
// logger.info("Add control binding...");
bc.addControlBinding(DYNAMIC_VIEW_NAME, dynamicRangeBinding);
} catch (Exception e) {
e.printStackTrace();
And my App Module method that redefines the view object looks like this:
public void setDispatchViewSQL() {
String SQL =
"begin ? := PK_BUsiNESS.F_GETDISPATCHVIEWSQL();end;";
CallableStatement st = null;
String ViewSQL = null;
try {
st = getDBTransaction().createCallableStatement(SQL,
DBTransaction.DEFAULT);
* Register the first bind parameter as our return value of type LONGVARCHAR
st.registerOutParameter(1, OracleTypes.LONGVARCHAR);
st.execute();
ViewSQL = ((OracleCallableStatement) st).getString(1);
findViewObject(DYNAMIC_VO_NAME).remove();
ViewObject vo = createViewObjectFromQueryStmt(DYNAMIC_VO_NAME, ViewSQL);
vo.executeQuery();
} catch (SQLException s) {
throw new JboException(s);
} finally {
try {
st.close();
} catch (SQLException s) {
s.printStackTrace();
When I run it I get my desired results. One thing I don't quite understand is why when the page is first rendered it shows the last set of records rather than the first. Now I have to figure out how to put navigation URLS in each of the table cells.
Thanks for your help; I would not have gotten this far without it,
Jeff -
Dynamic run-time objects in a query
Hi everybody,
I came across some docs that say this Dynamic SQL fails:
CREATE PROCEDURE drop_table (table_name IN VARCHAR2) AS
BEGIN
EXECUTE IMMEDIATE DROP TABLE :tab USING table_name;
END;
Can someone explain why can't an object name be provided through a bind variable?
And the workaround, according to the docs is:
CREATE PROCEDURE drop_table (table_name IN VARCHAR2) AS
BEGIN
EXECUTE IMMEDIATE DROP TABLE || table_name;
END;
Can you clarify on this?
Thanks.
-- Kishore.Kishore:
It is not really the compilier that has the problem, it is just telling you that your code will not run when you try to execute it. When you use bind variables, as in Case 1, Oracle does not "see" the value of the bind variable until it actually executes the statement (we'll ignore peeking in 9.2). So, if you issue something like:
SELECT col
FROM t
WHERE id = :bvWhen Oracle parses the query, it will check to see that t exists, you can select from it, col exists in t, etc. Then, the optimizer will look at the WHERE clause and say "I've got an equality predicate, is there an index on id? If so, it will most likely choose an index based access plan. At this point, the optimizer has no idea what the value of bv is. Now, it will bind the value passed into the query and executes it.
This can lead to bad plans if you have skewed data and no histograms what if id has only 2 distinct values 1 row with id 1 and 99,999 with id 2. If you pass 1 for id, then id is the proper access plan. However, if you pass 2 then a full table scan is much more appropriate.
Now, think about the sequence of events when you try to bind the object name into DDL. What the database will see at run time from the execute immediate statement is:
DROP TABLE :bv;The same things happen in the parse phase as in the SELECT. Oracle will check whether the table exists, that you have the required permissions to drop it, etc. But, which table does it check? Remember, at this point Oracle does not know what value is in the bind variable.
In case 2, what the database will see as the sql statement when the procedure executes is:
DROP TABLE t;Now, at run time, Oracle can do all the required parse time checking and execute the sql statement. The compiler recognizes that the string passed to execute immediate will be at least parsable by the database and allows the compilation to succeed.
HTH
John -
IBooks Author table of contents does recognize paragraph styles
The video
https://www.youtube.com/watch?v=n2p08-NmqfQ
shows that using iBooks Author I should be able to have text that is formatted with specific Paragraph Styles show automatically in the Table of Contents. But for me that does not work. My version of ibooksAuthor is version 2.1.1 ( the latest) , under OS 10.9.1 (the latest) on an iMac.
The video shows the Inspector for TOC as a separate window and shows explicitly, under Sections, the items Copyright, Dedication, Foreword, Section and Section Text. It also has two Paragraph styles listed, Heading 1 and Heading 2.
This set of TOC entries is available for me with templates from Landscape with Portrait but NOT with templates of Portrait. The templates available for Portrait do not list, in the TOC Inspector, Heading 1 or Heading 2.
Furthermore, the Portrait templates do NOT allow me to add any Paragraph style to the list (the control for adding Paragraph Styles to the list is grayed out), although the Landscape templates DO allow me to add any Paragraph style.
However, when, with a Landscape template (e.g. Basic) I format text as one of the paragraph styles Header 1, Header 2, Chapter, Section, it does NOT automatically show up in the TOC, though if I add a new section it does automatically show up. The TOC only lists Chapter and Section if these have been added from the menu bar.
When I use a Portrait template (e.g. Basic or any other) and format text as one of the Paragraph Styles Chapter or Section that text does not show up in the TOC. And the control for adding Paragraph Styles to the list is grayed out: I cannot add Header 1 or Header 2. The TOC only lists Chapter and Section if these have been added from the menu bar.
No matter what template I use, if I assign a paragraph style to some text, it does not show up in the TOC. And with Portrait templates, which is what I want to use, I cannot adde any paragraph styles to the TOC Inspector in Portrait templates.The iBA Help has info on: table of contents
Which includes:
Each book comes with a table of contents that is updated automatically. You can view the table of contents at any time by selecting Table of Contents in the sidebar. The table of contents includes a default set of items, but you can change which items appear. A table of contents can include:
Chapter and section titles: All chapter and section titles are included in the table of contents by default. If you remove a section from the table of contents, all other sections that use the same layout are removed as well.
Text that uses specified paragraph styles: By default, the table of contents includes all paragraphs in the book that use the Heading 1 and Heading 2 style, but you can include whichever styles you like. Paragraph styles appear in the table of contents only in portrait orientation. See Format text using styles.
The way the table of contents looks depends on the current page orientation. In landscape orientation (shown below), each chapter has its own contents page, with navigation buttons at the bottom. In portrait orientation, the entire book’s table of contents is visible as an expandable list.
Add or remove items in the table of contents
If the Document inspector isn’t open, click Inspector in the toolbar and click the Document Inspector button.
Click the TOC button.
Do either or both of the following:
To add an item: Click the Add pop-up menu , choose Add Paragraph Style, and choose an option from the submenu.
To remove an item: Select the item you want to remove and click the Delete button . -
IBooks Author strips tab stops from Table of Contents
Tab stops that are generated from section names are stripped from published iBooks Author files. When I click on Table of Contents in iBooks Author, I can see it exactly like it should be. Please see the screenshot that I have uploaded tabs.jpg.
Please note the Tab stops of the inspector that are in the screenshot. It shows clearly that I have made a number of tab stops and how it should be displayed. However, please download the following file to see how the tab stops are stripped from the .ibooks file that is created when I publish it:
http://ishqdesign.com/tabs/
I am in immediate need of a solution for a large book that I am in the process of publishing. Please advise.
Thanks,
JThe iBA Help has info on: table of contents
Which includes:
Each book comes with a table of contents that is updated automatically. You can view the table of contents at any time by selecting Table of Contents in the sidebar. The table of contents includes a default set of items, but you can change which items appear. A table of contents can include:
Chapter and section titles: All chapter and section titles are included in the table of contents by default. If you remove a section from the table of contents, all other sections that use the same layout are removed as well.
Text that uses specified paragraph styles: By default, the table of contents includes all paragraphs in the book that use the Heading 1 and Heading 2 style, but you can include whichever styles you like. Paragraph styles appear in the table of contents only in portrait orientation. See Format text using styles.
The way the table of contents looks depends on the current page orientation. In landscape orientation (shown below), each chapter has its own contents page, with navigation buttons at the bottom. In portrait orientation, the entire book’s table of contents is visible as an expandable list.
Add or remove items in the table of contents
If the Document inspector isn’t open, click Inspector in the toolbar and click the Document Inspector button.
Click the TOC button.
Do either or both of the following:
To add an item: Click the Add pop-up menu , choose Add Paragraph Style, and choose an option from the submenu.
To remove an item: Select the item you want to remove and click the Delete button . -
Hi
Is there any table that tells the run time of each step of process chain?
Thanks
Vennelahi,
In RSPC, select the process chain goto logs and click on the last step in the chain and do display messages. you wil get a screen with three tabs, goto Chain tab, you will find the time when the step in the chain started and the end time. This will tell you the run time for each step of the process chain.
Regards
Lavanya -
Add Exisiting Table to an Already Exising Dataset at run time
I have searched and searched
I have found the followind to "Create" a dataset and then create and add a table
to the dataset,
Example Below:
Dim customerOrders As DataSet = New DataSet("CustomerOrders")
Dim ordersTable As DataTable = customerOrders.Tables.Add("Orders")
Dim pkOrderID As DataColumn = ordersTable.Columns.Add( _
"OrderID", Type.GetType("System.Int32"))
ordersTable.Columns.Add("OrderQuantity", Type.GetType("System.Int32"))
ordersTable.Columns.Add("CompanyName", Type.GetType("System.String"))
ordersTable.PrimaryKey = New DataColumn() {pkOrderID}
What I need help with - PLEASE is
I already have a dataset named MyLearningDBDataSet.xsd in my Project
I have a Table that was created as copy of a table, but was given a Different Name at run time
How do I add this table to the Existing MyLearningDBDataSet.xsd....
I need to be able to delete rows out of the New table that was created (that is why I make a copy of it)
So Again : Please How do I add an Exisiting Table to an Exisiting Dataset? Please help! I have
searched and searched.Let me ask you this then Mr. Paul. Can you please show me how to create the dataset at run time, add a table to it, then put a binding navigator on the form that will be bound to it. If that is not possible, then can you show me how to have a
have a record (row) displayed in text boxes and then how I can navigate forward a record or back a record. Ultimately that is what I need.
I have everything working as is except for when I delete a row from the Table, since it is not part of the dataset (.xsd) then the BindingNavigator does not get the update, because the update is done to the table with the sql code. I will paste my
other post in here so you can get the big picture.
I have a dataset that was created at design time
but - after I run the app, it randomly creates a table based on The Users name
since I do not know the users name before had, the table is not part of my existing dataset
(I actually used an insert into sql nonquery to just make this table a copy of the masterUserTable)
Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to
make it bound to the users table (let's say GabrielUserTable)
I thought I did so with this code:
'TODO: This line of code loads data into the 'MyLearningDBDataSet.masterUserTable'
table. You can move, or remove it, as needed.
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
Dim ThisNewVariable As String = MyUserNameIs & "UserTable"
Dim ThisNewTableName As New DataTable
Me.MyLearningDBDataSet.masterUserTable.TableName = ThisNewVariable
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
that appeared to do the trick (but if it is incorrect please advice on the proper way to add a table
made at runtime to a users existing datset)
Else where in my code I successfully execute the following NonQuery :
SqlString= "DELETE FROM " & MyUserNameIs & "UserTable"
& vbCrLf &
"WHERE vState='" & txtStateInfo.Text & "';"
I check in Visual Studio 2013 that the row was deleted from the "GabrielUserTable" (Gabriel
is the current value of MyUserNameIs) by using the Server Explorer and right clicking
on the table and choosing show talbe data
But the MyMainDBBindingNavigator is still showing the item I deleted.
So after searching for answers - I created a new button for testing and added the following code to test if
it would work
Me.Validate()
Me.MyMainDBBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyLearningDBDataSet)
but the data is still showing after deleting it with my NonQuery
Again - please help!
I have purchased over 4 books and none of them explain this 2 me. -
Hi,
My requirement is in routine.I need to capture the value of an internal table and move it to another dummy internal table for some logic.But the internal table is run time internal table.
How to assign this internal table value to Field symbol.
Thanks in advance.
Ashokcan't you just define your dummy itab like your existing itab then move the contents?
dumm_itab[ ] = itab[ ]
Edited by: robert phelan on Sep 25, 2008 8:37 PM -
How to get the content in embed swf file in Swf Loader on run time
How to get the content in embed swf file in Swf Loader on run time
[Bindable]
[Embed(source="assets/index.swf")]
private var SWFSRC:Class;
<mx:SWFLoader id="_swfloader" source="{SWFSRC}" />Hi Flex harUI,
Throw the error.
Access of undefined property content -
HOW TO create a temp table or a record group at run time
i have a a tabular form and i dont want to allow the user entering duplicate
records while he is in insert mode and the inserted records are new and not exsisting in the database.
so i want to know how to create a temp table or a record group at run time to hold the inserted valuse and compare if they are exsiting in previous rows or no.
please help!As was stated above, there are better ways to do it. But if you still wish to create a temporary block to hold the inserted records, then you can do this:
Create a non-database block with items that have the same data types as the database table. When the user creates a new record, insert the record in the non-database block. Then, before the commit, compare the records in the non-database block with those in the database block, one at a time, item by item. If the record is not a duplicate, copy the record to the database block. Commit the records, and delete the records in the non-database block. -
Changing data in the table control during run time of transaction F-28
Dear Experts,
in transaction F-28 of second screen of second column (Field Name: Assignment) currently the data is getting from BSEG table and populating this column of table control, now I have a requirement that the data should be get from the other ZTABLE and populate this column during run time instead of the data from BSEG table, please let me know your suggestions, if you guys feel it will be done using User Exit then please let me know the suitable exit for this.
Best Regards
VenkatHi Venkat,
Use the appropriate sort key in the GL to fill up the assignment field automatically.
U can create ur new sort key through OB16
Regards,
Kiran -
RUN Time error while use filter table in query generator
Hai..
I have 2 Functions under "Scalar valued functions" in SQL Server,i try to call this functions in Query generator its working fine,result also display correctly, but i click filter table system showing Error Message " Run Time Error,Abnormal program termination" then SAP is get closed,i tested this scenario in 3 Database am getting same error , Is this BUG in SAP B1?There is no error number in error messageThis is my function
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date, ,>
-- Description: <Description, ,>
-- =============================================
ALTER function [dbo].[Get_TransObjName](@Obj_type NUMERIC(20,5))
returns varchar(500) as
BEGIN
DECLARE @Obj_type_Name varchar(100)
select @Obj_type_Name =
case @Obj_type
when -2 then 'Opening Balance'
when -3 then 'Closing Balance'
when 1 then 'oChartOfAccounts'
when 2 then 'oBusinessPartners'
when 3 then 'oBanks'
when 4 then 'oItems'
when 5 then 'oVatGroups'
when 6 then 'oPriceLists'
when 7 then 'oSpecialPrices'
when 8 then 'oItemProperties'
when 12 then 'oUsers'
when 13 then 'A/R Invoices'
when 14 then 'A/R Credit Memo'
when 15 then 'A/R DeliveryNotes'
when 16 then 'A/R Returns'
when 17 then 'oOrders'
when 18 then 'A/P Invoice'
when 19 then 'A/P Credit Memo'
when 20 then 'Goods Receipt PO'
when 21 then 'Goods Returns'
when 22 then 'PurchaseOrders'
when 23 then 'Quotations'
when 24 then 'IncomingPayments'
when 25 then 'Deposit'
when 28 then 'oJournalVouchers'
when 30 then 'JournalEntries'
when 31 then 'oStockTakings'
when 33 then 'oContacts'
when 36 then 'oCreditCards'
when 37 then 'oCurrencyCodes'
when 40 then 'oPaymentTermsTypes'
when 42 then 'oBankPages'
when 43 then 'oManufacturers'
when 46 then 'VendorPayments'
when 48 then 'oLandedCostsCodes'
when 49 then 'oShippingTypes'
when 50 then 'oLengthMeasures'
when 51 then 'oWeightMeasures'
when 52 then 'oItemGroups'
when 53 then 'oSalesPersons'
when 56 then 'oCustomsGroups'
when 57 then 'ChecksforPayment'
when 58 then 'Stock List'
when 59 then 'Goods Receipt'
when 60 then 'Goods Issue'
when 64 then 'oWarehouses'
when 65 then 'oCommissionGroups'
when 66 then 'oProductTrees'
when 67 then 'Inventory Transfers'
when 68 then 'oWorkOrders'
when 69 then 'Landed Costs'
when 70 then 'oCreditPaymentMethods'
when 71 then 'oCreditCardPayments'
when 73 then 'oAlternateCatNum'
when 76 then 'Postdated Deposit'
when 77 then 'oBudget'
when 78 then 'oBudgetDistribution'
when 81 then 'oMessages'
when 91 then 'oBudgetScenarios'
when 97 then 'oSalesOpportunities'
when 93 then 'oUserDefaultGroups'
when 101 then 'oSalesStages'
when 103 then 'oActivityTypes'
when 104 then 'oActivityLocations'
when 112 then 'oDrafts'
when 116 then 'oDeductionTaxHierarchies'
when 117 then 'oDeductionTaxGroups'
when 125 then 'oAdditionalExpenses'
when 126 then 'oSalesTaxAuthorities'
when 127 then 'oSalesTaxAuthoritiesTypes'
when 128 then 'oSalesTaxCodes'
when 134 then 'oQueryCategories'
when 138 then 'oFactoringIndicators'
when 140 then 'oPaymentsDrafts'
when 142 then 'oAccountSegmentations'
when 143 then 'oAccountSegmentationCategories'
when 144 then 'oWarehouseLocations'
when 145 then 'oForms1099'
when 146 then 'oInventoryCycles'
when 147 then 'oWizardPaymentMethods'
when 150 then 'oBPPriorities'
when 151 then 'oDunningLetters'
when 152 then 'oUserFields'
when 153 then 'oUserTables'
when 156 then 'oPickLists'
when 158 then 'oPaymentRunExport'
when 160 then 'oUserQueries'
when 162 then 'Inventory Valuation'
when 163 then 'oCorrectionPurchaseInvoice'
when 164 then 'oCorrectionPurchaseInvoiceReversal'
when 165 then 'oCorrectionInvoice'
when 166 then 'oCorrectionInvoiceReversal'
when 170 then 'oContractTemplates'
when 171 then 'oEmployeesInfo'
when 176 then 'oCustomerEquipmentCards'
when 178 then 'oWithholdingTaxCodes'
when 182 then 'oBillOfExchangeTransactions'
when 189 then 'oKnowledgeBaseSolutions'
when 190 then 'oServiceContracts'
when 191 then 'oServiceCalls'
when 193 then 'oUserKeys'
when 194 then 'oQueue'
when 198 then 'oSalesForecast'
when 200 then 'oTerritories'
when 201 then 'oIndustries'
when 202 then 'oProductionOrders'
when 203 then 'A/R Down Payment'
when 204 then 'A/P Down Payment'
when 205 then 'oPackagesTypes'
when 206 then 'oUserObjectsMD'
when 211 then 'oTeams'
when 212 then 'oRelationships'
when 214 then 'oUserPermissionTree'
when 217 then 'oActivityStatus'
when 218 then 'oChooseFromList'
when 219 then 'oFormattedSearches'
when 221 then 'oAttachments2'
when 223 then 'oUserLanguages'
when 224 then 'oMultiLanguageTranslations'
when 229 then 'oDynamicSystemStrings'
when 231 then 'oHouseBankAccounts'
when 247 then 'oBusinessPlaces'
when 250 then 'oLocalEra'
when 280 then 'oSalesTaxInvoice'
when 281 then 'oPurchaseTaxInvoice'
when 300 then 'BoRecordset'
when 305 then 'BoBridge'
when 260 then 'oNotaFiscalUsage'
when 258 then 'oNotaFiscalCFOP'
when 259 then 'oNotaFiscalCST'
when 261 then 'oClosingDateProcedure'
when 10 then 'oBusinessPartnerGroups'
when 278 then 'oBPFiscalRegistryID'
else cast(@Obj_type as char(20)) end
return @Obj_type_Name
END
Maybe you are looking for
-
How can I use two tabular forms on the same page.
I have create one tabular form in page and try to create second tabular form so it gives below error. 1 error has occurred Updatable SQL Query already exists on page XXXXX. You can only add one updatable SQL query per page. Select a different page.
-
Okay I use a Powerbook G4. -I used the restore cd from boot -I chose the option to erase the drive and re-install OSX I find it unusual that the time remaining says 60+ hours. Also, when I look at the log while it is installing, I see a few errors "f
-
Zero is getting truncated while XI is creating a CSV file
Hi, Scenario is IDOC to File. in the IDOC i get some Serial number as 00000007856465 in the output CSV file i need this value as 07856465 Here when i run this map in the ESR Message mapping i could see 07856465 this value fine but while posting at th
-
Excise modvat accounts not defined for EWPO transaction and 13 excise group
Dear All During execution of report in j2ier1 I am getting following error. For One plant it is giving following error Excise modvat accounts not defined for EWPO transaction and 13 excise group. And for other plant it is giving following error Excis
-
Lost license key for Starffice 8
Hi there, IU have, through a fatal harddrive crash lost all license keys optained online (including staroffice). Does anybody know how I would be able to optain the initial key again?