Zero is getting truncated while XI is creating a CSV file

Hi,
Scenario is IDOC to File.
in the IDOC i get some Serial number as 00000007856465 in the output CSV file i need this value as 07856465
Here when i run this map in the ESR Message mapping i could see 07856465 this value fine but while posting at the output directory the values are dropped with zeros truncated.
in the output CSV file -- the value is -- 7856465
Could you please help me out in solving this issue.
Thanks,
--Sai.

Hi Sai Krishna,
As said by Bhaskar, use Formatnum function or UDF in your mapping. So that you would be able to get the 0's in the output.
I would prefer to go with FormatNum function.
Check the UDF provided by Raja Shekar in the below thread:
UDF for leading zero's in message mapping
Thanks,

Similar Messages

Getting CLOB fron Database then creating a CSV File

Hi,
I am trying to read a CLOB for the DB in my Backing Bean with the help of EJB.
The code in my backing bean is:
char[] strReportContent = reportObj.getReportText();The API where the accessors for getReportText() is;
@Lob
@Column(name="REPORT_TEXT")
public char[] getReportText()
    return reportText;
public void setReportText(char[] reportText)
    this.reportText = reportText;
}The problem is that when I do a system out on strReportContent I get a garbage value and not what is in the DB.
Please Help.
Then to render it on the CSV the code is:
// Init servlet response.
      response.reset();
      response.setContentType("plain/text");
      // response.setContentLength(input.available());
      response.setHeader("Content-disposition",
                         "inline; filename=\"" + selectedReportId.getReportName() + "\"");
      output =
          new BufferedOutputStream(response.getOutputStream(), DEFAULT_BUFFER_SIZE);
char[] strReportContent = reportObj.getReportText();
output.write(strReportContent.toString().getBytes(), 0, strReportContent.length);

Hi,
I am not removing any zeroes . I created the same file in .txt format and XI was able to write the value 008.2010 to the txt file.
I suppose this has somehting to do with excel file properties . By default when we add 008.2010 in the excel sheet , it takes only 8.201. We need to change the format to "text" manually in the excel file to take in zeroes as well.
So , i really dont know how to make sure that the excel file properties does not truncate zeroes while XI is creating the CSV file.
Regards
Vinay P.

Data getting truncated while exporting report to a text file in crystal 10?

Hi All,
I am using crystal 10.When exporting report to a text file ,a dialog prompts asking for Character perinch with a default value 9.If I change the value from 9 to 16 i am getting the correct data(that means character per inch value is 16) and it update "CharPerInch" value in registry under following location to 16.
HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal Reports\Export\Text
The dialog asked for character per inch also has option to select not to prompt again and i also selected that in first go.
When i export the report again in text format it didn't prompt for number of character per inch but the data gets truncated.
What i believe is even though it updates entry in registry and reads, it is not using the same value for export. It never consider the value that is in registry, if the check box is not selected then it is using the value entered in the dialog and if the check box is selected then in the next run it uses the default value as 9.
Can anyone suggest me how to override this problem ? Is there any other setting place in registry where i can enter the number of character per inch.I don't want to crystal to prompt always for character per inch.

Hi Venkateswaran,
The other option to avoid truncation of the data could be
Right click the text filed
Click on Format Text to open the Format Editor
On Common tab check the text box for Can Grow.
This will prevent the data from truncating in preview as well as while exporting to text.
Otherwise you will have to set the characters per inch to 16 each time. I donu2019t see changing the registry value causing any difference here.
Regards,
Aditya Joshi

How do I get Lightroom 4 to automatically create an xmp file?*

How do I get Lightroom 4 to automatically create an xmp file?*

Assuming you have RAW photos
Edit->Catalog Settings > Metadata then check “Automatically Write Changes to XMP”
Not RAW photos ... the same setting causes the metadata to be written into the files, but does not create an xmp file

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

Issue when creating a CSV file

Stupid issue but I've tried to fix it all day and it's not working...
I need to create a CSV file made up of 3 columns, 2 number and 1 char. The char column is a company name that has spaces in it. When I run the query in SQL Developer, the char column looks fine. When I run in in BiPub as a CSV, I get double-quotes around the char column. It looks fine if I would look at it as DATA or any other format.
I can't use the REPLACE function because there's nothing wrong with the data.
We're using BI Pub v.10.1.3.4.
Any thoughts?
Thanks!!
Kris

First I tried using a basic rtf file and just selected CSV as the type. Then I tried using the 'e-text template' and selecting CSV, same result. Now I'm trying to use an .xsl file instead of a .rtf to see if that works.
Kris

How to create a CSV file in java

how to create a CSV file in java

this is the code that I have used in a hp project:
private static final String DELIMIT = ",";
StringBuffer buf = new StringBuffer();
public void addString(String str){
buf.append(toEscapedStringLiteral(str.replaceAll(" ","").trim())).append(DELIMIT);
public void sendFile( String strData ,
                            String strTitle,
                            String strContType,
                            HttpServletResponse res ) throws IOException {
          byte[] _filedata=strData.getBytes();
          res.setContentType( strContType );
          res.setHeader( "Content-Disposition", "attachment;filename="+ strTitle );
                 DataOutputStream out = new DataOutputStream( res.getOutputStream() );
          out.write( _filedata, 0, _filedata.length );
          out.close();
public void addStringWhithReturn(String str){
          buf.append(toEscapedStringLiteral(str.replaceAll(" ","").trim()));
          buf.append( "\n" );
private String toEscapedStringLiteral( String charSeq ) {
          if ( null == charSeq ) {
               charSeq = "";
          return "\"" + charSeq + "\"";
....hope its help
kou

Create a csv file and send it in an email

In coldfusion, is it possible to create a csv file and send it in an email, without ever saving that file on the hard drive?

Yes, you can create an email attachment without writing a file to disk. This feature was introduced in CF 8.0.1.
I've posted a sample to a previous thread on the forums.
http://forums.adobe.com/message/2123297
See the CFMAILPARAM section of CF 8.0.1 release notes for attachments without a file on disk.
http://www.adobe.com/support/documentation/en/coldfusion/801/cf801releasenotes.pdf

How to create a .CSV file & place it in Application server

Hi All,
I have a requirement like .
1.Create a .CSV file by using report output data.
2.The .csv file should be placed in application server.
When user will execute the report,
automatically a .csv has to generate and that should be available at application server.
points will be rewarded.
Thanks,
Anil

Hi,
Whatever the final output internal table is there loop that
DATA : begin of i_final occurs 0,
              field1(20),
              field2(20),
            end of i_final.
DATA : v_filepath (200) TYPE c Value '/data/sapdata/test.csv' .
DATA : begin of i_file_data occurs 0,
              Rec(500),
            end of i_file_data.
LOOP AT i_final.
CONCATENATE i_final-field1 i_final-field2 INTO i_file_data-rec SEPARATED BY ','.
APPEND i_file_data.
CLEAR i_file_data.
ENDLOOP.
OPEN DATASET v_filepath IN OUTPUT FOR TEXT MODE.
LOOP AT i_file_data.
TRANSFER i_file_data-rec TO v_filepath.
ENDLOOP.
CLOSE v_filepath.
To check the file goto Tcode->AL11>data/sapdata/test.csv.

Getting error while trying to create the push certificate...

I am getting the following error while trying to create a push certificate for the mdm from the apple site.
Certificate Signature Verification failed because the signature is invalid.
I am mdm vendor as well as the customer. I did the following steps.
openssl x509 -inform der -in mdm_identity.cer -out mdm.pem
openssl x509 -inform der -in AppleWWDRCA.cer -out intermediate.pem
openssl x509 -inform der -in AppleIncRootCertificate.cer -out root.pem
openssl req -inform pem -outform der -in customer.csr -out customer.der
created the plist_encoded file using a java program which uses the "SHA1WthRSA"
When i tried to upload the plist_encoded file to the apple site (https://identity.apple.com/pushcert/), it creates a file with the following error
{"ErrorCode":-80018,"ErrorMessage":"Certificate Signature Verification failed","ErrorDescription":"Certificate Signature Verification failed because the <a href=\"http://www.apple.com/business/mdm\" target=\"_blank\">signature<\/a> is invalid."}
Any help would be greatly appreciated....

Please see the solution in (The Descriptive Flexfield With Application Name Receivables (AR) and Name Party Site Information (HZ_PARTY_SITES) Is Not Frozen [ID 743262.1]).
Thanks,
Hussein

Notes getting truncated while importing excel to MS project

Hi All
I am importing an excel sheet to MS project 2010 through import map. There are some notes related to tasks that are longer than 255 words in length. When the project map is completed, all the fields are fine other than the notes field. The data in notes
field gets truncated to 126 characters. Can someone help me out on this.
Udyan

To those who may be interested in this thread.
The jury is still out on whether this truncation bug is also present in Project 2013/Excel 2013. Meanwhile I've developed a macro that will export a formatted Excel Workbook into Project. The macro is structured to run from Excel. The main purpose of the
macro is to export the full notes text data, (i.e. no truncation even at 255 characters), from a specified column on the Excel Worksheet into the Notes field of Project. Other basic Project data including Task Name, Outline level, Duration, Start, &
Resource Names are also exported. An example of the formatted Excel Worksheet is shown below.
If you are interested in this macro, let me know.
John
Example of formatted data for export. Note that multiple resource assignments per task are handled (not easily done with an import map alone). The macro detects the units used in the worksheet duration column (i.e. number only, or number with "h",
"d", or "w") such that the proper data is exported to Project (i.e. minutes). For reference the note text shown for Task b is the text string that is truncated at 126 characters when using a simple import map. That bug is resolved by the macro. The notes text
for Task c is is 406 characters and all of them are exported by the macro (i.e. no truncation at 255 characters). The notes text for Task d has a line feed in the text string and that is exported by the macro.

ALV truncation while download using List--Save/send--File--Spread sheet

Experts,
In ALV output, I am trying to download using menu item
"List --> Save/send --> File --> Spread sheet" then in the popup appears
here if i GIVE the FILE NAME THEN,material number is getting truncated.
If I don't give any file name it is storing as ".xls" and not getting truncated.
How to correct this or avoid this truncation.
OR
If we can't do correction about truncation ...my function consultant is asking to
to disable "List --> Save/send --> File".
Thanks in advance.
Sam

Solved by my own....
We need to pass
i_fieldcat-no_zero = 'X'.
so that the zeros at the end won't get truncated.

Creating a CSV file from a pl/sql procedure

Hi Everyone,
I would like to know how to write a procedure in pl/sql where i need to check if they are any records in a table say "Table A".
If they are any records in the "Table A" then we need to write those records in the "Table A" to the CSV file.
If they are no records then we need to insert a record into the CSV file that "No records are found in "Table A".
Could anybody please help ?
Thanks in advance

see this
ops$tkyte@8i> create or replace procedure dump_table_to_csv( p_tname in varchar2,
2 p_dir in varchar2,
3 p_filename in varchar2 )
4 is
5 l_output utl_file.file_type;
6 l_theCursor integer default dbms_sql.open_cursor;
7 l_columnValue varchar2(4000);
8 l_status integer;
9 l_query varchar2(1000)
10 default 'select * from ' || p_tname;
11 l_colCnt number := 0;
12 l_separator varchar2(1);
13 l_descTbl dbms_sql.desc_tab;
14 begin
15 l_output := utl_file.fopen( p_dir, p_filename, 'w' );
16 execute immediate 'alter session set nls_date_format=''dd-mon-yyyy hh24:mi:ss''
17
18 dbms_sql.parse( l_theCursor, l_query, dbms_sql.native );
19 dbms_sql.describe_columns( l_theCursor, l_colCnt, l_descTbl );
20
21 for i in 1 .. l_colCnt loop
22 utl_file.put( l_output, l_separator || '"' || l_descTbl(i).col_name || '"'
23 dbms_sql.define_column( l_theCursor, i, l_columnValue, 4000 );
24 l_separator := ',';
25 end loop;
26 utl_file.new_line( l_output );
27
28 l_status := dbms_sql.execute(l_theCursor);
29
30 while ( dbms_sql.fetch_rows(l_theCursor) > 0 ) loop
31 l_separator := '';
32 for i in 1 .. l_colCnt loop
33 dbms_sql.column_value( l_theCursor, i, l_columnValue );
34 utl_file.put( l_output, l_separator || l_columnValue );
35 l_separator := ',';
36 end loop;
37 utl_file.new_line( l_output );
38 end loop;
39 dbms_sql.close_cursor(l_theCursor);
40 utl_file.fclose( l_output );
41
42 execute immediate 'alter session set nls_date_format=''dd-MON-yy'' ';
43 exception
44 when others then
45 execute immediate 'alter session set nls_date_format=''dd-MON-yy'' ';
46 raise;
47 end;
48 /
Procedure created.
ops$tkyte@8i> exec dump_table_to_csv( 'emp', '/tmp', 'tkyte.emp' );
PL/SQL procedure successfully completed.

SQL server 2014 and VS 2013 - BuilInsert task - truncate a field data of a CSV file and insert it to SQL table.

Hello everyone,
To move data from roughly 50 CSV files in a loop to SQL tables (table per CSV file), I've used BulkInsert task in For each loop container.
Please know, for all different columns of all CSV files, the filed length was specified as varchar(255).
It worked well for the first 6 files but on 7th file, it has found the data in one of the columns of CSV file, which exceeds the limit of 255 characters. I would like to truncate the data and insert the remaining data for this column. In other words, I would
like to insert first 255 characters into table for this field and let the package execute further.
Also, if I would use SQLBulkCopy in Script task, will it be able to resolve this problem? I believe, I would face the similar problem over there too. Although, would like to get confirmation for the same from experts.
Can you please advise how to get rid of this truncation error?
Any help would be greatly appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

Hello! I suggest you add a derived column transformation between Source and Destination, use string functions to extract first 255 characters from the incoming field and send this output to destination field, that ways you can get rid of these sort of issues.
Useful Links:
http://sqlage.blogspot.in/2013/07/ssis-how-to-use-derived-column.html
Good Luck!
Please Mark This As Answer if it solved your issue.
Please Vote This As Helpful if it helps to solve your issue

Exchange PowerShell script to get mailbox properties of user from a CSV file

Hi Team,
I've a CSV file with alias of numerous users and I want to get their mailbox sizes and other properties. These users are dispersed in various databases of same Exchange organization.
Need a Powershell Script, Any help?
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

You can use this and modify it to what you need. Output to a file (IE: Export-CSV "path to file"
If you need more specifics let me know. This one is for one user at a time but can be used to read a CSV file.
# Notifies the user a remote session needs to be started
Write-Host "Get a users mailbox size" -fore yellow -back red;
Write-Host "Please wait while a remote session started" -fore red -back yellow;
# Import a remote session with exchange
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri http://exchangeservername/Powershell/ -Authentication Kerberos
Import-PSSession $Session
Do {
# Prompts user for a name
$name = Read-Host "Enter a username"
# Get the mailbox statistics for that user
Get-MailboxStatistics $name | fl totalitemsize, storagelimitstatus, totaldeleteditemsize | out-default
# Give the user a choice to test another or EXIT
$Output = Read-Host "Press Y to continue or ENTER to exit"
# Ends the program if the user does not press Y
Until ($Output -ne "Y")
HossFly, Exchange Administrator

Zero is getting truncated while XI is creating a CSV file

Similar Messages

Maybe you are looking for