Table of Contents Issue - TOC Styles Set Correctly, but TOC Shows Two Fonts on One TOC Line

I created a template and set up all of the styles correctly, as with every other template I've ever made. However, I have never run into this problem before.
I created the template to match a client's style/look. They use a font called "Gill Sans MT." My Normal style is set to this, and my TOC styles (TOC 1, TOC 2, TOC 3, etc.) are based off of the Normal style. My Heading styles are
also based off the Normal style and use the same font.
For some reason, the TOC in the document is populating with two different styles. The actual Heading text is showing up as Arial font, but the tab leader and the page number are showing up in the Gill Sans MT font (see below).
Any idea what's going on here? I have tried modifying the TOC styles, inserting a new TOC, basing the TOC styles off of "(no style)," changing the Heading styles, clearing the formatting on the Heading styles, etc. I can't get anything
to work.

All I can suggest is to try your steps again. You mention everything that I would try.
I assume that the template is a .dotx or .dotm file, and so, does not have an "attached template."
When you tried basing your TOC styles off "no style" I assume you set the font to Gill Sans MT. I would definitely have the heading and TOC styles set to cascade.
How styles in Microsoft Word cascade by Shauna Kelly
Charles Kenyon Madison, WI

Similar Messages

Table of Contents thing will not work correctly

The table of contents generator, or whatever it is called, won't work properly. It keeps returning this:
Other_ways_to_ego_boost
Table of Contents
Introduction
What is a nerd?
Transactional Analysis
Power Assertive Behavior
Other Ways to Ego Boost
Internet Tough Guys
Ego Boost Denied
Video Games Don’t Cause Violence
Case Study #1: StarCraft
How to Avoid Nerds in StarCraft
StarCraft Ban Criteria
Case Study #2: League of Legends
Checklist of Symptoms
Case Study #3: Halo/Call of Duty
Conclusions
Works Cited
Why is there something shown as "Other_ways_to_ego_boost" at the top of this? This appears nowhere in my document and is a redunant header of the actual chapter title which seems to appear correctly in the table of contents. Why is it picking up a phantom of this and putting underscores after each word?

When there is not a title set to Heading Style 1 on the first line of the document being converted, the next place the program looks for the title is in the file properties. Open the document and view its properties to see if this is where that TOC entry is being pulled.
BTW - if your title is not on the first line of the manuscript and there is not a title in the Properties field, the TOC entry for the eBook title will be <untitled>.

Table of contents issue

Hi ,
I am an XML publisher newbie. I looked around in the forums and couldn't find an answer to this. I am using XML Publisher 5.6.2. I created an RTF template and created the Table of contents section using Microsoft word. When I use this template to generate a rtf document, I am able to see the table of contents. But, the page number always shows up as 0. when I click on the link, it takes me to the correct location in the generated doc. But, there is no way to update the page numbers. Can somebody help?
Thanks!

Hi Vetsrini,
I tried exactly what you said. I put <?company?> as heading2 in a for loop. Once I added it , I updated the TOC (entire table). When the output is generated, I can see "Company1", "Company2" etc in my TOC. They are getting dynamically generated. But, the Page number still shows up as zero. When I click on them, it would take me to the correct location. But, the page number would show up as zero. I tried this from XML Desktop publisher (using preview). I also tried to generate it through a Java program by calling the APIs. The output is still the same. I have one more issue and I am not sure whether it is related to this or not. I am not able to display the page number in the generated output. I have defined it in the footer in my template. But, the output doesn't show the page number.
Thanks.

Table of Contents issue in 11.1.2.1

Has anyone seen an issue with a book table of contents when generated in PDF Format. 11.1.2.1
On the side panel where each page is displayed there is a Table of Contents page listed but when you click on the report it does not show up at all. It is the 1st report. No Table of Contents.
Thanks.
Judy

Hi Judy,
I've seen the following bug, which sounds similar, at a client and the issue was fixed with patch set 107:
12800944 – The table of contents does not display and the page numbering is incorrect in a Complete Book in PDF.
Other book bugs fixed in patch 107:
12916617 – The page numbering in a Complete Book in PDF is incorrect.
13071627 - If a Book has page size set to Legal/Ledger/A3/A4, the complete book PDF's page numbering and Book TOC's (Table of Contents) Mapping are wrong.
12802465 - Complete Book in PDF returns a blank page with dots in 11.1.2.1.
12916552 – The table of content links navigates to the wrong report in the Complete Book in PDF.
I don't think it requires other patches to be installed (essbase, APS, Foundation, etc) however it will require re-installation of FR Studio and reconfiguration of the FR Print Server.
Hope this helps.
Cheers, Iain

Table of Contents Issue/Question

Hi everyone, I hope I can put my question accurately into words.
I'm working on a 450 page product catalog in Indesign CS5 for the mac. The catalog has 7 main sections, in which there are numerous smaller sections. I need to create a table of contents for these smaller sections, however, my issue is this; my table of contents is based on the product names which I've applied a paragraph style to, but, also included on the same line that the product name is, are several small icons. I used the library function to put these icons into place. I put my curser where I wanted the icons to be, went to the library, right clicked on the icon I wanted, and selected place item. I found this to be the easiest way since there were approximately 1500 products in the catalog. So, my issue is, now that I'm creating a mini-table of contents for these numerous sections, the icons are included in my table of contents, which I don't want. I can manually go in and delete each icon, but I'm thinking there has to be a faster way. I thought of possibly a grep style but can't figure out how to make that work.
Any help would be appreciated! It's going to take a while to delete each one of those. I hope I've described this accurately; please feel free to ask any questions if it's not clear.
Thanks so much!
Annette

Oh my gosh, that did it! Thank you sooooo much!
I couldn't figure out how to choose just those characters because I hadn't designated them as anchored objects; that was throwing me, but I guess Indesign saw them as such.
Thanks again, you've saved me hours of work!
Sincerely,
Annette

I'm using the free epub reader, the file I imported says "Due to an error in the ePub file, the table of contents can't be displayed correctly.

For experts: The NCX-file is not a valid xml-file..Can you help me? Donna

Hi,
It's actually not the first time I have seen this issue, please refer to this thread below:
https://social.technet.microsoft.com/Forums/en-US/01bbe40c-f522-4148-a7cc-86303da5416d/your-file-could-not-be-printed-due-to-an-error?forum=excel
Here are some suggestions:
1. If this issue only occurs to one Workbook, copy the file contents and paste them to another new Workbook, try to print and check the result.
2. Maybe Excel is configured to run in Compatibility Mode. Right click on the Excel shortcut, click Properties -> Compatibility tab -> If Excel is configured to run in compatibility mode, untick it and click OK.
3. There may be some corruption in the Excel install, try to repair Office from Control Panel -> Programs and Features.
I hope the information is helpful to you in this scenario.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Table of Contents Issue for ePub

I am trying to create a TOC for an ePub that looks like I want it to:
Chapter One: The Name of Chapter One
Chapter Two: The Name of Chapter Two
etc.
To do this:
I imported the ePub styles from the ePub sample document
On a page which begins a chapter I typed "Chapter X" and gave it the Chapter Number style
Under that I put the name of the chapter and gave it the Chapters style
I selected both the Chapter Number and Chapters styles in the TOC tab of the Inspector
The resulting TOC in the ePub document looks like this:
Chapter One
Name of Chapter One
Chapter Two
Name of Chapter Two
If I DEselect the Chapter Number style in the inspector the entire TOC gets messed up
How can I get the TOC to look like I want (see above).
Thanks.

Make sure the TOC is in the style source document
Thank you so much! This was the thing I did wrong. There had been another document marked for style source. Now it works perfectly.
Almute

Table of Contents page numbers works for PDF but not for other formats

Hi,
I followed exactly was indicated here regarding creation of TOC.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
(HTML and XLS are understandably not paginated in nature but why not in RTF?)
Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
What am I doing wrong?
Regards,
Jarell
Edited by: Jarell on Jan 11, 2012 8:08 PM

Hi Kavipriya,
What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
You may use any xml because the template does not use any dynamic binding of values.
The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
So the end result should be (PDF result from BI Publisher):
First TOC Item .................. 1
Second TOC Item ............. 2
But for RTF it outputs:
First TOC Item .................. 0
Second TOC Item ............. 0
And after doing Print Preview (once or twice)
First TOC Item .................. Error in Bookmark
Second TOC Item ............. Error in Bookmark
Hope this is detailed enough to illustrate the problem.
Edited by: Jarell on Jan 17, 2012 10:24 PM

Indesign Bleeds set correct but print wrong

I have a vendor supplied InDesign file built in facing pages with bleeds and marks set to bleed .125" on three sides and 0" bleed on the insides of the pages, however when I print the pages the inside edges also show .125" bleed. I have gone through the panels several times and cannot find why this is happening. We are a commercial printer and use this setup on many jobs and it always works the way we want. Don't know where the issue is and would like to resolve it for future happenings. Thanks

Okay I have attached the pdfs and screen grabs you requested

Dreamweaver CS3 adds p align="center" /p 44 times after a table and before the text. When the code is remove it puts the text to the side of the table. In Dreamweaver the setup is correct but in Chrome, Firefox, and IE there is a large space.

</tr>
</table>
<h3 align="center" class="style2"> 
</h3>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
<a href="Compatibility_Pack.html">To Open To Open Word</a><a href="Compatibility_Pack.html">2007 Document in Word 2003</a>
The website is:
Mitchell Public Library

Take your hand off the ENTER key .
You're using deprecated code. Align="center" and tags have been obsolete since HTML4.
Use the W3C Validation tools below to check your code for errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Issue in workflow workitem that gets triggered to two users at one time.

Hi All,
Below are the query details:
Module: HR
Area:      Workflow
Process: Hiring
There is an workflow in HR module that is triggered when an hiring action is run against an candidate.
There are two or three maximum approvers which is based on the position to which the candidate is hired.
Issue:
During the hiring process some times the workitem is getting triggered to two users at once.
One is the actual approver who should receive the workitem in his UWL and other is the user of our service center who is no where involved in the approval process.
Analysis Done:
We checked the workflow log and found that the actual approver's ID is getting displayed under agent and workflow is complete. But the other user's ID is no where shown in the log but he has received an workitem in his UWL that makes the issue still confusing.
Awaiting for experts suggestions.

Reply to Susan Questions:
You say that 'the workitem is getting triggered to two users at once' - do you mean that there are two workflow instances that are being kicked off at the same time when the hiring action is performed? Or is it that the workflow is generating two tasks that go to these different users?
Ans : There is a single task attached to the activity.
Is this a custom workflow?
Ans : Yes.
Are you certain that the erroneous task is only going to the user in the service center, or is it perhaps going to everybody (marked as a general task)?
Ans : The task is marked as general but the workitem is received by only one user of the service center at a time.
         As this issue has taken place 4 times in the past year all the 4 receiver were different belonging to different position.
Reply to Pavan Questions:
1. Did you try to check the SPRO settings with respect to Hiring Process ,is there any where based on the position does workflow is forwarding the workitem to the other user.
2. Check the other user Roles and in the Org Structure where he is located , there could be a possibility of wrong position holding.
Ans : We checked the org structure, but org structure of both the centers are different and independent there is no linkage    between the two.
*3. IF you are using custom workflow then check if any standard workflow is also getting triggered. Check *
Ans : Yes this is a custom workflow, but no other Standard workflow is being called.
4. Check in the SWEHR3 is any custom entries maintained.
Ans : No, entries are maintained in SWEHR3.
Additional Info :
The task that triggers the workitem has an send mail step before it.
The send mail activity is to notify receiver that there is an workitem lying in the UWL.This mail is received by the actual user and not by the other one.The next step is the task that creates workitem which gets triggered totwo different IDs.
This scenarios mostly has come up when the number of approver is 1. If the approver is more than 1 the workflow runs fine without deviating the workitem to any worng user.

Applications installed correctly but not showing in applications folder Macbook 2009

I have a friends MacBook running 10.6.8 2.26Ghz Intel Core Duo 8 gig ram. I have installed UnrarX a couple of times with no errors in the installation process, however the application does not appear in the applications folder or any where else and cannot find it to open .rar files.
I fixed the issue by simply copying the UnrarX app from my MacBookPro but would like to find out what is going on. I have been told by my friend that she has had this issue before.

I'm not familiar with that application, however, taking a guess that UnrarX installs in such a way that when you right click on a file name, it's a utility that's available to use on that file, as opposed to a separately executable program.

Subcategory XML is correct but only showing in Main

Hey Guys! This has been answered a thousand times but my xml is correct! We have a podcast here http://itunes.apple.com/us/podcast/audio-podcast/id499677932
It is showing in Religion & Spirituality and that is good but I need it in the subcategory Christianity. Here is the code from itunes for subcategories and directly beneath that is the code from my XML file. They are identical with the exception of the titles.
<itunes:category text="Society & Culture">
<itunes:category text="History" />
</itunes:category>
<itunes:category text="Religion & Spirituality">
<itunes:category text="Christianity" /></itunes:category>
Here is a direct feed to my xml file...
http://crossover2life.org/audiopodcast.xml
Can anyone tell me why im not showing in the subcategory? Thanks All!
Message was edited by: pastor_cmarsh

The category and sub-category show at the top of the page in the iTunes Store in iTunes. If you look within the categories you don't see all the podcasts in that category - there would be thousands - you see 'featured' podcasts. Apple explain that here:
http://www.apple.com/itunes/podcasts/specs.html#getfeatured
but basically they select what appears as featured podcasts and you can't influence the choice.

I have a website where the masthead and other title fonts are defined in the CSS but Firefox shows the font as Times Roman. The website is correctly displayed in IE9, IE8, chrome and opera.

The fonts, which have been described in the CSS file as:
#content h1{background-color:transparent;border:0px;font-family:"Copperplate Gothic bold";font-size:1.75em;font-weight:normal;margin:0px 0px 10px 0px;padding:0px;}
Display as Times Roman (I think).
If i substitute a single word font name instead of : "Copperplate Gothic bold" such as: "Arial" it works ok.

Do you see that font listed as one of the default fonts?
* Tools > Options > Content : Fonts & Colors : Default font
Do you see that font if you select it as the default?
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

Eprint set up but not showing on google cloud

I've successfully set up my All in One D110 for hp eprint. And set the option to allow google cloud print, but it does not show on my list of printers. I've added the printer on the registration page and it says it is already registered and needs to be shared with myself?
This question was solved.
View Solution.

Please click on my link above and provide the exact model number of your printer. There are three different 8500A printers. What have you done to set this up? Has it been working before or are you setting it up for the first time? Do you have ePrint set up and working? The more information you provide on where the breakdown is occurring and what you've done so far, I can better assist you.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Table of Contents Issue - TOC Styles Set Correctly, but TOC Shows Two Fonts on One TOC Line

Similar Messages

Maybe you are looking for