Table of WBS MRP Date Data

I want to know all MRP Run Dates for a WBS Elements i.e all the dates in which MRP is carried out for that particular wbs. Please Reply ASAP.
Thanks

Dear,
Yor question is not clear. Are you looking for the PS driven MRP data?
You will get the data in MD4c...enter the Project or WBS..you will get the required data
This data is not comming from one table
Try using FM- MD_STOCK_REQUIREMENTS_LIST_API

Similar Messages

MRP area data tables

Hello all,
We want to know the tables where the MRP area data for a storage location is stored. We are looking table which are similar to MDKP and MDTB in which the noraml MRP data is stored. we do not use comsumption planning at the Mrp area level and we have scheduling agreements which go the the mrp area storage location and we get a STO from the storage location to the production storage location. I am looking for data which is displayed in MD06 for the MRP area. Thanks in Advance.

Table      MDLV
Short Description: Customizing MRP Area
Table      MDMA
Short Description: MRP Area for Material
Table      MDLG
Short Description: Customizing: MRP Area Storage Location
Table      DVER
Short Description: Material Consumption for MRP Area
Table      MDIP
Short Description: Material: MRP Profiles (Field Contents)

Table for WBS status change with date

Hi,
Please assist me with a table name which should have WBS status with date on which statis was changed.
Thanks,
Manish.

Hi
You can use program (SE38) RBSVCDOC to track these changes. Else go manually in CJ20N to track these status changes.
Use JCDS and JEST table for any other reporting on it.
*Kindly mark your thread once your query is resolved.*
Regards
Saurabh

Query Regarding transfer of WBS element change data

Hi All,
We have a requirement in which we need to transfer the change/create/delete information for WBS element in SAP to a third party system for certain set of specified fields.
The problem we are facing is that the change and create information dosen't get updated in the CDHDR and CDPOS tables, but the master table for WBS element (PRPS).
One way of fetching the change information is to compare the old and new field values for the specified fields, which seems to be a tedious job.
Just wanted to know if there is any other possible solution to the above requirement????
Thanks in advance,
Manish Gupta

You should also include Oracle Warehouse Builder in your evaluation. It uses Oracle gateways to pull data from 3rd party databases and supports loading from flat files as well. If these data sources support ODBC, then you might be able to load via the ODBC (Generic Connectivity Gateway), wouldn't be super fast, but it you could manage the dowtime...
http://www.oracle.com/technology/products/warehouse/index.html
Donal

How to insert row in table control and save the data in tables

Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.

Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
                                                                      ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
       WITH CONTROL CTRL_LP_D516
       CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
    MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.

Creation of internal table dynamically based on the Date Range entered

Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
<b>CSR    District   06/2006 07/2006 08/2006 totals</b>
Shiva      New York                             10.00
Shiva      new york                             30.00
Shiva      new york                             40.00
but it should display like this
<b>CSR    District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00   30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram Kandula

Hi Sivaram,
             I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
    ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
    ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
*    <dyn_wa> = tab_item-bztxt.
*    <dyn_wa> = tab_item-total.
*    APPEND <dyn_wa> TO <dyn_table>.
**    <dyn_wa> = tab_item-total.
**    ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
   EXPORTING
     it_fieldcatalog = gt_fCAT1
   IMPORTING
     ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
   create data new_line like line of <dyn_table>.
   assign new_line->* to <dyn_wa>.
select vbeln
        fkart
        vkorg
        vtweg
        fkdat
        spart
        fksto
        from vbrk
        client specified
        into table gt_vbrk
        where mandt = sy-mandt
        and fkart in ('ZF5','ZFR')
        and vkorg = '1100'
        and vtweg = '20'
        and fkdat in s_fkdat
        and spart = '06'
        and fksto = ' '.
   if gt_vbrk[] is not initial.
select vbeln
          fkimg
          prsdt
          netwr
          matnr
          arktx
          werks
          mwsbp
          from vbrp
          client specified
          into table gt_vbrp
          for all entries in gt_vbrk
          where vbeln = gt_vbrk-vbeln
          and werks in s_werks
          and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
       name1(3) type c,
       s_month type string,
        s_month1 type string,
         s_month2 type string.
*      lv_netwr1 type vbrp-netwr,
*          lv_mwsbp1 type vbrp-mwsbp.
      loop at gt_vbrp into gs_vbrp.
        gs_final2-matnr = gs_vbrp-matnr.
        gs_final2-arktx = gs_vbrp-arktx.
        gs_final2-fkimg = gs_vbrp-fkimg.
       lv_month1 = gs_vbrp-prsdt.
        read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
        if sy-subrc eq 0.
        name1 = wa_t247-ltx.
        endif.
         concatenate name1
                   lv_month1(4) into s_month SEPARATED BY '_' .
         CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
          CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
         gs_final2-month = s_month.
          lv_netwr1 = gs_vbrp-netwr.
        lv_mwsbp1 = gs_vbrp-mwsbp.
        gs_final2-MONTH_QTY = S_MONTH1.
        GS_FINAL2-MONTH_VAL = S_MONTH2.
        gs_final2-value = lv_netwr1 + lv_mwsbp1.
       append gs_final2 to gt_final2.
       clear: gs_final2. "lv_name2.
       endloop.
       if gt_final2[] is not initial.
         sort gt_final2 by matnr month ascending .
         loop at gt_final2 into gs_final2.
        gs_final2_01 = gs_final2.
     collect gs_final2_01 into gt_final2_01.
    endloop.
       endif.
   ENDIF..
Regards
Ankur

Change Mrp Element Data of Production Order in MD04

Dear guru ,
In the mrp element data of the stock/requirement list for the production order I see the
Production order number , the order type , and the system add /RE if production order is released or
/PD if production order is partial delivered. No other information about others production order status.
How can I change mrp element data using Customizing or ABAP in order to recognize in MD04 if production order is confirmed or partial confirmed ?
Thanks.

Dear Cris ,
I am not sure if CNF/PCNF will show up in the MRP Element data in MD04.I have checked PO which are also CNF/PCNF and i looked the same order in md04.It is not showing .U may need some ABAP help .
But if you really intersted to see the list PO status together , then go to COOIS and give plant , order type .It will give you all the order under that plant irrespective of material and also Status.U ave lot of option to filter the PO status under Status Profile or System status ok.
Hope this will fullfill your requirement
Reward point if useful
Regars
Jia

How To UPLOAD a DATA (.DAT) fiel from PC to internal table and then split it into the data different columns

Hi all,
I am new to ABAP Development. I need to upload a .DAT file (the file doesn#t have any proper structure-- Please find the .DAT file in the attachment). After uploading the DATA (.DAT) fiel I need to split in into different columns. Refering the attached .DAT fiel the fields in bracets like:
[Arbeitstag], [Pecunia], [Mita], [Kunde], [Auftrag] and [Position] are different fields that need to be arranged in columns in an internal table. this .DAT fiel which I want to upload and then SPLIT it into various fields will will treated as MASTER DATA table for further programming. The program that I had written is as below. Also please refer the attached .DAT table.
Please if any one could help me. i searched a lot in different forums but couldn't find me a solution. Also note that the attached fiel is in text (.txt) format here but in real situation the same fiel is in DATA (.DAT) format.
*& Report ZDEMO_ZEITERFASSUNG9
REPORT ZDEMO_ZEITERFASSUNG9.
Types: Begin of ttab,
        Rec(1000) type c,
       End of ttab.
DATA: itab type table of ttab.
DATA: wa_tab type ttab.
DATA: file_str type string.
Parameters: p_file type localfile.
At selection-screen on value-request for p_file.
                                       CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
                                        EXPORTING
*                                          PROGRAM_NAME        = SYST-REPID
*                                          DYNPRO_NUMBER       = SYST-DYNNR
*                                          FIELD_NAME          = ' '
                                           STATIC              = 'X'
*                                          MASK                = ' '
                                         CHANGING
                                           file_name           = p_file.
*                                        EXCEPTIONS
*                                          MASK_TOO_LONG       = 1
*                                          OTHERS              = 2
Start-of-Selection.
file_str = P_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\BUP_ZEIT.DAT'   " This the file source address
      FILETYPE                      = 'DAT'
      HAS_FIELD_SEPARATOR           = ';'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*     CODEPAGE                      = ' '
*     IGNORE_CERR                   = ABAP_TRUE
*     REPLACEMENT                   = '#'
*     CHECK_BOM                     = ' '
*     VIRUS_SCAN_PROFILE            =
*     NO_AUTH_CHECK                 = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    tables
      data_tab                      = itab
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP at itab into wa_tab.
        WRITE: / wa_tab.
ENDLOOP.
I will be grateful to all you experts for ur inputs
regards
Chandan Singh

For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = 'C:\temp\test.txt'
CHANGING
    data_tab = lt_data
EXCEPTIONS
    OTHERS   = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
      ls_str TYPE ty_str,
      lv_block TYPE string,
      lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
    WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
         OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
      lv_block = lv_data.
      lv_flag = abap_false.
    WHEN OTHERS.
      lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
    WHEN '[Auftrag]'.
      SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
    WHEN '[Position]'.
      SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
      APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP.

Table in which system updates data collected through KKRV

Hi,
Can any one tell me the table in which system updates data collected through KKRV?
and the correct procedure to collect the data for product drilldown.
can i run KKRC alogwith KKRV to get summerized reports?
Thanks in advance
Regards,

You could probably trace them at COSP or COSS tables where the object starts with VD (summarization object).
Summarization transaction are better if run separately. First KKRV for summarising plant level information and then KKRC for hierarchy summarization.

Tables in which Appraisal note data stored..

Hi...Experts.
I want to know about the tables in which appraisal note data stored. please help me.
Regards,
Siva

https://forums.sdn.sap.com/click.jspa?searchID=9573368&messageID=5013157

Tables in CRM- Sales Area Data

Hi,
We have downloaded the Customer Master from R/3 to CRM system. Initial Load was successful and delta is also working fine. We are getting the R/3 sales area data in CRM system when we open a BP.
But here our issue is, we could not locate the sales area data in any of these below CRM tables -
CRMD_ORGMAN
CRMM_BUT_FRG0081
CRMM_BUT_FRG0080
This data we require for BW purpose, Can anyone help me where I can get this data?
The Bdocs coming from R/3 to CRM contains complete sales area data.
Thanks&regards,
kalyan

It depends on the tab you have maintained for sales area.
CRMM_BUT_LNK0011 holds the sales area data for the sales tab on the screen.
CRMM_BUT_LNK0021 holds the sales area data if the shipping tab is maintained.
Similarly if the billing tab is maintained, you ll find the data within the CRMM_BUT_LNK0031 table.
I hope this helps.
Regards,
Gaurav Gera

F.M or Table to get contract cancellation date in CRM

Hi,
Can you please let me know, where contract cancellation date would be available or stored n table or FM..
I have header GUID of contract, to which table or FM need to pass to get contract cancellation date.
crm_order_read function module is also not able to give the cancellation date.
Regards
Badari

HI using this methods u can create dynamic internal tables,
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = FIELD_CATALOG
    IMPORTING
      EP_TABLE        = GFINAL.
ASSIGN GFINAL->* TO <GFINAL>.
CREATE DATA WFINAL LIKE LINE OF <GFINAL>.
ASSIGN WFINAL->* TO <WFINAL>.
Please let me know once the requirement clearly , is the fm or Method importing parameter is internal table , corresponding to that
internal table you need to fetch data from data base.
In general , field symbols holds some memory in memory area , I think just like pointers in C language , this holds address only , there we dynamically assign some structure .
Let me know once if u not cleared ,
Regards
Siva

Table that contains the change date for every cost element

Hi everyone!
Can anyone please help me find a table which contains the change date for every cost element?
Thanks,Jess

If you basically want to find out if anyone changed the cost element, you need to use transaction KA05 and enter the cost element and controlling area.
This would actually bring you whatever field was changed and on double clicking give you the actual change and the date on which the change was made.
Problem is this change date is actually the creation date of a change document which is in the table CDHDR.Its not like the change date is on any master tables.
Hope this helps
Deepa

How to create a new table based out of old data rows

Hi All,
How to create a new table based out of old data rows. Also how can we find out the DBF for different users in a database?
Saqib

Not very clear what you need. I'll try to interpret...
How to create a new table based out of old data rowsIf this means how to create a table from an existing one, then you can do :
SQL> create table <new table> as select * from <old table>;
if you need a subset of rows you can add a where clause.
how can we find out the DBF for different users in a database?Here I need some more clarification. What do you mean exactly ?

Table & Field Name for Plan Data in CO

Hi All,
Can anyone tell me the table & field name where we can get the planned data in Cost Center Accounting and Profit Center Accounting.
I checked out the COSP(which is Totals) and COEP tables for CCA but i could find the fields only for actual data and not planned data.
Same for PCA...i checked out the GLPCT & GLPCA tables but in vain.
Regards & Thanks
Piyush Kothari.

Hi,
Thanks for the reply but COKL is only for Activity Type which contains Allocation Cost Elements.
I would like to have the Table & Field name for Plan data of Primary Cost Element.
Piyush

Table of WBS MRP Date Data

Similar Messages

Maybe you are looking for