Table that contains the change date for every cost element

Hi everyone!
Can anyone please help me find a table which contains the change date for every cost element?
Thanks,Jess

If you basically want to find out if anyone changed the cost element, you need to use transaction KA05 and enter the cost element and controlling area.
This would actually bring you whatever field was changed and on double clicking give you the actual change and the date on which the change was made.
Problem is this change date is actually the creation date of a change document which is in the table CDHDR.Its not like the change date is on any master tables.
Hope this helps
Deepa

Similar Messages

  • What are the T-codes that contain the master data for material and vendor?

    what are the T-codes that contain the master data for material and vendor?

    hi ,
    - Display Material  tcodes...
    MM01 - Create Material
    MM02 - Change Material
    MM03 - Display Material
    MM50 - List Extendable Materials
    MMBE - Stock Overview
    MMI1 - Create Operating Supplies
    MMN1 - Create Non-Stock Material
    MMS1 - Create Service
    MMU1 - Create Non-Valuated Material
    ME51N - Create Purchase Requisition
    ME52N - Change Purchase Requisition
    ME53N - Display Purchase Requisition
    ME5A - Purchase Requisitions: List Display
    ME5J - Purchase Requisitions for Project
    ME5K - Requisitions by Account Assignment
    MELB - Purch. Transactions by Tracking No.
    ME56 - Assign Source to Purch. Requisition
    ME57 - Assign and Process Requisitions
    ME58 - Ordering: Assigned Requisitions
    ME59 - Automatic Generation of POs
    ME54 - Release Purchase Requisition
    ME55 - Collective Release of Purchase Reqs.
    ME5F - Release Reminder: Purch. Requisition
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MBRL - Return Delivery per Mat. Document
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB1B - Transfer Posting
    MIBC - ABC Analysis for Cycle Counting
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI21 - Print physical inventory document
    MI04 - Enter Inventory Count with Document
    MI05 - Change Inventory Count
    MI06 - Display Inventory Count
    MI09 - Enter Inventory Count w/o Document
    MI34 - Batch Input: Enter Count
    MI35 - Batch Input: Post Zero Stock Balance
    MI38 - Batch Input: Count and Differences
    MI39 - Batch Input: Document and Count
    MI40 - Batch Input: Doc., Count and Diff.
    MI08 - Create List of Differences with Doc.
    MI10 - Create List of Differences w/o Doc.
    MI20 - Print List of Differences
    MI11 - Physical Inventory Document Recount
    MI07 - Process List of Differences
    MI37 - Batch Input: Post Differences
    for vendor..
    XKN1  Display Number Ranges (Vendor)
    XK01  Create vendor (centrally)
    XK02  Change vendor (centrally)
    XK03  Display vendor (centrally)
    XK04  Vendor Changes (Centrally)
    XK05  Block Vendor (Centrally)
    XK06 Mark vendor for deletion (centrally
    XK07  Change vendor account group
    XK11  Create Condition
    XK12  Change Condition
    XK13  Display Condition
    XK14  Create with cond. ref. (cond. list)
    XK15  Create Conditions (background job)
    reward points if useful,
    venkat.

  • Tables that contains the legacy systems authorization information

    Hi all,
    I'm setting up legacy systems in my SAP GRC 5.3. We would like to check if the information uploaded from the extractor is correct. Does anyone know what are the GRC 5.3 tables that contains all the systems authorization from the legacy system uploaded?
    Thank you in advanced.

    Hi,
    If I understand your question correctly, you wish to know the GRC 5.3 RAR tables that contains the authorization information and want to connect a legacy system.
    If you check the /VIRSA/* tables, you can find all the GRC related tables.
    However, if you are trying to perform an offline risk analysis, refer the below Article:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20a06e3f-24b6-2a10-dba0-e8174339c47c
    Hope this helps!!
    Regards,
    Raghu

  • Changed data for OM infotypes

    Hi All,
    Could anyone let me know if there is any sap standard program which will give all the changed data for OM related Infotypes? I know we have some idoc types which can do this, but I am looking for some standard program.
    Please help.
    thanks
    shyam

    Hi Suresh,
    Thanks for the information. But I am unable to see any documents in the table T77CDOC_CUST even though I made some changes to the OM data for a particular object. I see that there is a SWITCH in the above table which needs to be activated..I think in my system it is not active..So could you please let me know how can I activate this?
    Many thanks

  • Number convention for Secondary cost element

    Hi,
    Anyone can guide me how to check the number convention for secondary cost element being set up in SAP?
    thank you

    Hi,
    The best way so far i have experienced is:
    Start the numbering with two digits from your company code and then cost element category and then the numerics.  If you have too many Cost elements, better to have 10 Digit numbering system.
    Assumption: You have multiple company codes
    For Example you company code is TP01
    Activity Type Cost element:
    TP43000001 - Labour Hours
    TP43000002 - Machine hours
    and so on
    This is easy for identifying either from the consultant point of view of the end user point of view
    Best Regards
    Surya

  • How do I perform a trigger that collect the data for every rising edge continuously and then automatically put the data in a .xls file??

    I need to collect the data for every rising edge a trigger perfoms. So far I could collect the data but it seems that it only collect the data in the start of triggering, but not continuously. I also want to put the data in an excel spreadsheet and automatically add new set of data when the next rising edge occur. Please help.
    thanks a lot.

    LabWindows/CVI actually ships with a comprehensive set of examples for just about every area of programming you can use it in, including triggered analog data acquisition and ActiveX control of Microsoft Excel for data logging. Go to the following two directories on your computer to find respective examples for the two areas you are inquiring about:
    1) C:\MeasurementStudio\CVI\samples\DAQ\Ai\DAQsingleBufExtTrig.PRJ
    2) C:\MeasurementStudio\CVI\samples\activex\excel\excel2000dem.prj
    Just make sure to study the examples carefully so that you fully understand the processes followed for triggered analog acquisition and the process of launching an ActiveX automation server for control, and then you should be able to merge the concepts shown in both of the example
    s to make the application you desire.
    Jason F.
    Applications Engineer
    National Instruments
    www.ni.com/ask

  • XD02 transaction to change the customer data for updating KNA1 table?

    Hi all,
    How can we use XD02 transaction to change the customer data for updating KNA1 table?
    Give the steps.
    Thanks in advance
    rk

    Hi KR,
    Why don't u use BDC to run XD02.
    With Regards,
    Zafar Ali

  • Query for retreiving table names that have the same data

    Hi,
    Does anybody know how to retreive all the table names that have the same data in their respective tables but i dont know the table names or its fields. Is there any possible query to perform this action???
    Thanks in Advance,
    Balaji.

    What about...
    WITH manager_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id
      AND   m.name = :P_MANAGER)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    ), all_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    SELECT a.*
    FROM   manager_list m,
           all_list a
    WHERE  m.employees = a.employeesWould be easier in 11g, but I don't have an installation here so this is based on 10g.
    Cheers
    Ben

  • How to find a specific word (from a list) in a sentence located in a different table, and build a column that contains the name

    Hi all, 
    I have 2 tables:
    1) Lookup table- "Names"- which contains ID# and product description (~100 names that can change).
    2) Data table- "Data"- which contains a column with sentences and within lies also the description. In addition, there is a quantity column.
    Example:
    Names table-
    ID
    Name
    1 Glass
    2 Paper
    3 Alum'
    4 Metal for construction
    100 Hydro therapy products
    And Data table-
    Description
    Qty
    Someone went to use the machine. 1.80 cm, Alum', for the rest of the day
    6
    Metal for construction is the major component in our system
    7
    <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="ba668f16-4de8-41d9-af39-d1b17422d6fe" id="ae5b76e8-6897-46c8-823b-86a382087f83">Kandoo</gs>, Delgado,
    Glass 17
    Greece needs more paper, 200 ft.
     45
    *there is no order where the lookup value can be found in the sentence*
    My purpose is to import the Data table while performing a calculation, that <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="1941bde7-1595-40eb-9d64-c2e3b9fabdef" id="b60549fc-5b92-46ea-abc6-72cc8c4c093b">checks</gs>
    for each row what is the suitable lookup value and then add it to a new column "Name". 
    Meaning, this table should be the new data after import:
    <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="f5d9da98-3ff6-4022-920d-8965a15730ee" id="580f945f-7822-4035-9b5b-542c74eff605">Description</gs>
    Qty                        
    Name
    Someone went to use the machine. 1.80 cm, Alum', for the rest of the day
    6 Alum'
    Metal for construction is the major component in our system
    7 Metal for construction
    <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="365dd7f8-7ffc-4ef3-95bf-9bf03421c90d" id="c9ba8515-3dba-4a6b-929e-650510f70844">Kandoo</gs>, Delgado, Glass
    17 Glass
    Greece needs more Paper, 200 ft.
     45 Paper
    Appreciate all support! 
    I lost hope and I want to avoid macros as much as possible.
    Thanks!
    עמית

    Hi Amit,
    I updated the file. The solution uses the following query formula:
    let
    Source = Excel.CurrentWorkbook(){[Name="DataTbl"]}[Content],
    #"Added Custom" = Table.AddColumn(Source, "Custom", each IndexTbl),
    #"Expand Custom" = Table.ExpandTableColumn(#"Added Custom", "Custom", {"Scope"}, {"Scope"}),
    #"Filtered Rows" = Table.SelectRows(#"Expand Custom", each Text.Contains([Description], [Scope])),
    #"Grouped Rows" = Table.Group(#"Filtered Rows", {"Topic", "Component Code", "Project", "Date", "TotalQty", "TotalQtyActual", "ID", "SOW #", " SOW#(lf)Rev", "Scope Driver", "Scope Source", "Scope Source #", "Cost Code", "Type", "Bdg", "System Code", "IMF Number", "IMF Description", "WG", "C or NC", "C/e", "LLE", "Dwg Ref", "Comments ", "Description", "Size", "Qty", "Unit", "Materials Cost/Unit ", "Sub-Total per Unit €", "Unit Rate ", "Total", "DIV Code", "SYS Code", "HelperForDynfilter"}, {{"Scope", each Text.Combine([Scope], " | "), type text}})
    in
    #"Grouped Rows"
    It is based on two queries. The first is the import from table of "IndexTbl", the second is the import of "DataTbl' which is then extended according to the expression above.
    Hope this helps.
    Gil

  • Unable to Determine the Change Date and Time for records in infotype 2011

    Hi Everyone,
    We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
    The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
    It is not possible to get the audit logs for infotype 2011 as it is switched off.
    We found this table TEVEN and just the same thing, the field "change on" is blank.
    Kindly help us on how we can determine the change date and time for records in infotype 2011.

    Hi Prasad,
    Here's the scenario.
    On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
    However, when I checked infotype 2011, the record is there.
    So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
    The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
    Can you help further on this?

  • Urgent-change the end date for a existing wage type.

    Hi,
    Can u pls let us know how to change the end date for a existing wage type.
    The current end date is 30.8.2008  and we would like to change to 31.12.9999.
    Rgds,

    Use This report RPCLGV00
    The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator ‘A’ when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employee’s organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
    The wage type distribution offers you the following options for evaluation:
    Individual reporting for a specific personnel number or name.
    Totals evaluation without specifying a personnel number or name.
    You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
    Scope of Function
    You use the following parameters to determine how the appearance of the wage type statement:
    Wage type for evaluation
    Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
    Evaluation start date
    Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
    Evaluation end date
    This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

  • Sales Order creation/ change date for the items

    I have a unique scenario and i need to get a Report for this
    A sales order is created for 4 line items.
    Out of these , for 2 line items a delivery is created. I need the sales order creation date and time  for these 2 items in a custom report
    Now the other 2 items go in to some kind of block- Now these are released by going in the sales order VA02 and after releasing the delivery is created. Again for these two items , i need the sales order change date as after a user goes and changes the sales order to remove the block only then delivery is created for these two items
    Also another scenario is the 2 line items go for back order and when we get stock  at tht time system confirms the stock and then the delivery is created for these. So also for this when this change occured i need to get the date for these 2 line items
    Can any one please suggest how to get this data  from the scenarios?
    I dont want to get the date when the delivery is created as i can get tht from the LIKP table. I need the sales order create and change dates for these.

    You may be aware, any changes to a document will be recorded in CDHDR (for header changes) and CDPOS (for item changes).  You can explore these two tables.
    thanks
    G. Lakshmipathi

  • How to search for a pattern string in entire registry and delete all the keys and subkeys that contain the pattern (C# or VB)?

    I want to search for a pattern string in the entire registry and need to delete all the keys and sub-keys that contain the pattern. How can I implement this in VB Script or C#? Appreciate if you can give some sample examples. Now every time, I am manually
    searching for the pattern in registry and deleting one by one.
    Thanks Prasad

    There is no built in way to do this. You'll end up having to enumerate all keys and values in the entire registry and comparing each one for a pattern using Regex or similar.  This is going to be really slow but there isn't much else you can do about
    it (other than parallelize the enumeration).  Also note that you won't have permissions to all keys for read and/or write access so you'll need to skip over those using exception handling.
    Michael Taylor
    http://blogs.msmvps.com/p3net

  • What are the tables that Contains DTP Filter Entries

    Hello,
    for the filter entries on a DTP Process I found the table RSBKSELECT "Selections for DTP Request (Summary)". But that holds only value which are done generic by Formula etc. but not the information which are entered manual.
    Does anybody knows the table for the rest of entries ??
    I need this Information to Report these Filter as Selectioncriteria.
    Thank for any help
    Henning

    Hi,
    Please note that I was able to link the tables by this kind of code:
    "Get the request from the cube, to identify them.
        CALL FUNCTION 'RSSM_ICUBE_REQUESTS_GET'
          EXPORTING
            i_infocube     = LV_IC
          IMPORTING
            e_t_request    = LT_REQUEST
          EXCEPTIONS
            wrong_infocube = 1
            internal_error = 2
            others         = 3.
    "Check each request
        LOOP AT LT_REQUEST INTO LS_REQUEST.
          "Populate LV_REQUID_CHAR to be able to read the table RSBKSELECT
          "The key is : Request id, without leading 0, right justified, and shifted one time to the left.
          LV_REQUID_CHAR = LS_REQUEST-PARTNR.
          SHIFT LV_REQUID_CHAR LEFT DELETING LEADING '0'.
          SHIFT LV_REQUID_CHAR RIGHT DELETING TRAILING SPACE.
          SHIFT LV_REQUID_CHAR LEFT.
          "Get the filters
          SELECT  *
            INTO TABLE LT_RSBKSELECT
            FROM RSBKSELECT
            WHERE REQUID = LV_REQUID_CHAR.
    ENDLOOP.
    The internal table LT_RSBKSELECT will now contains all the filters used by the DTP.
    It is way better than using the field that contains the concatenation of all filters since it is limited to 255 characters.
    Hope it helps.

  • Need to update a table that contains large volume of xml data

    Hi,
    i want to update a table that contains large amount of XML data.
    when execute the query it shows an error .
    Xml parsing is failed .But tghe data in xml is well formed.don't know why its happening .
    Pls help me on this.
    Thanks,
    Fahad

    below is my code..
    pls do the needful.
    create or replace
    PROCEDURE SPFETCHRETRIEVEDATA (
        p_txteordernum IN trnorderitem.TXTEORDERNUM%TYPE,
        p_intversionnum IN trnorderitem.INTVERSIONNUM%TYPE ,
        p_interrorcode OUT NUMBER)
        AS
        ------variable declaration---
        v_xmlorderitem XMLTYPE;
        v_trnsiebelmodification XMLTYPE;
        diff XMLTYPE;
            BEGIN
                BEGIN
                select xmlorderitemxml into v_xmlorderitem
                from trnorderitem
                where TXTEORDERNUM= p_txteordernum
                AND INTVERSIONNUM= p_intversionnum;
                  END;
               --insert into tempxml values ('xmlorderitem',v_xmlorderitem);commit;
                BEGIN
                SELECT TrnSiebelModificationXML into v_trnsiebelmodification
                from trnsiebelmodification
                where TXTEORDERNUM= p_txteordernum
                AND INTVERSIONNUM= p_intversionnum
                AND TXTSIEBELFIELDNAME='Asset XML';
              --  insert into tempxml values ('trnsiebelmodification',v_trnsiebelmodification);commit;
    --            EXCEPTION
    --            WHEN TOO_MANY_ROWS THEN
    --            dbms_output.put_line('Statement return multiple rows');
                 END;
    --------comparing differences between xml data and storing into a variable -----------
               BEGIN
               select xmldiff(v_xmlorderitem, v_trnsiebelmodification)
               into   diff
               from   dual;
               --insert into tempxml values ('diffxml',diff);commit;
               if diff IS NOT NULL THEN
               UPDATE trnsiebelmodification
                SET TXTACTIONTYPE='Update2'
                WHERE TXTEORDERNUM= p_txteordernum
                AND INTVERSIONNUM= p_intversionnum
                 AND TXTSIEBELFIELDNAME='Asset XML';
                ELSE
                UPDATE trnsiebelmodification
                SET TXTACTIONTYPE='No Change2'
                WHERE TXTEORDERNUM= p_txteordernum
                AND INTVERSIONNUM= p_intversionnum
                 AND TXTSIEBELFIELDNAME='Asset XML';
                END IF;
                END;
        END SPFETCHRETRIEVEDATA;Edited by: BluShadow on 11-Sep-2012 14:13
    added {noformat}{noformat} tags. Please read: {message:id=9360002} and learn to do this yourself.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Maybe you are looking for