Table/ Report that shows GR and PO

Are there any tables or reports that give all the GR documents for a PO? and Is there any way to reverse or cancel a GR document?

hi,
1. You can check at table EKBE - puchasing doc history in tcode SE16...
2. At PO history tab in the respective PO..
3. At trnsaction ME87 - aggregate PO history...
You can cancel / reverse the document from MIGO transaction with the reference of the last material document...
Hope it helps..
Regards
Priyanka.P

Similar Messages

Is there a table/report that shows a list of the original tcodes vs tcodes?

How to I find out the calling tcode of a transaction other than using SE93?
e.g
ABUM 's original tcode is AB01.
Is there a table/report that shows a list of the original tcodes vs tcodes?

Table TCDCOUPLES gives a list of called tcodes for a particular tcode.
e.g
For parameter tcode 1KEF , called-tcodes are :
1KE1
1KEF
1KEG
OKKS
BUT this table does not show which called-tcode is the original tcode.
Using se93, I see that 1KEG is the original tcode.
Is there a table that will show only the parameter tcodes vs orginal tcodes?

Report that shows managers and his/her Employees

Hello All,
Is there any standard report that shows the list of managers and his employees.
Eg:
Report should like below
ManagerObjID EmployeeObjid
When I enter a position of a manager it should give managers and employees belonging to that position.
Thanks
Venkat

hi,
u can that details from HRP1001 table.
or u can use function module RH_STRUC_GET .

Help with report that shows Year and Last Year

Hello!
I want to view in a report some KPIs (Rows) and Years(Columns) but I want a specific report with a prompt, I mind, at top of my dashboard there is a Year prompt that it contains (2001, 2002, 2003….,2010) and I want to see in a report when I chose in prompt 2008 for example that my report shows me 2008 Year and Last Year (2007) and another column that indicate Diference between these years. Is that possible? Can u explain me the process to get it?
Thank you very much!

If you get access, create a duplicate of the Measure you wish to use in the Business Model.
Once you have a duplicate rename to say $ Revenue Year Ago and then from the properties of the Measure, General click on Use existing logical columns as the source.
Then select function>Time Series> Ago
Ago has 3 inputs, select the column you want to base the measure on, the TIME SERIES Dimensions for year, and then 1 for 1 year ago.
So your formula will look something like:
Ago("Human Resources"."Fact - Absence"."# Days" , "Human Resources"."Time"."Year" , 1)
Save this and copy into your Presentation layer available for use.
Hope this helps

Report that shows Asset number with acquisition year and acquisition month

Hi Gurus,
Is there any standrd FA report that shows assts with acquisition year and equisition month/period.
thnx

This reprot gives you the calender year dates but we are actually for for fiscal year date and period.
Example
asset acquired on 05/01/2009 calender year
our fiscal year will be 02/01/2010. ( April to March).
we need to generate reports that shows second dates ( fiscal year 02/01/2010) and your mentioned report shows only caldender year( 05/01/09). advice if know any report
thnx

Std. Report that shows PSG linked to WBS (Pdt. hier. defined)

Hi Experts,
Is there any standard report that show, which Profit segment is derived and receives settled costs and revenues for a particular WBSE?
Our scenario:
(1) Billing WBS element is assigned to SO Line item, and billing plan is created and accordingly invoicing happens.
(2) Product hierarchy is defined in MM and linked to COPA for derivation of PSG.
Thanks in advance.

Hi Aditya,
There are no standard reports in PS which will give you this information. You need to check with your CO counterparts to get it.
Most probably i think there won't be any standard report available to give you that detail. Try creating a custom report.
Use the table COBRA and COBRB with RPSCO or COSP/COEP table with PRPS to get the desired results.
Cheers
Sammar

UCCX8 Is there a log or report that shows IVR/CTI port availability over time

Question:
Is there a log or report that shows IVR/CTI port availability over time?
Objective:
We are trying to determine if, when doing a Call Redirect step, the IVR/CTI port stays the same or the port is made available by the first script and the second script, where the Call Redirect is redirecting to, has to reserve its own IVR/CTI port.
What we have done already:
We limited the Call Control Group to 1 CTI port and ran the scripts that do the Call Redirect step and it worked fine, so we are assuming that there is not a point where the transfer takes up two IVR/CTI ports at the same time.
-Lauren

Hi,
if it's UCCE, then if I remember that correctly, there is a webview report that would tell you Network Trunk Group utilization. Or, actually, you can extract this information yourself from the HDS table named Trunk_Group_Half_Hour.
G.

Report that shows material codes according to valuation class/ BSX posting

Dear SAP experts,
Is it possible to generate a report that shows all material codes under a certain valuation class or BSX (inventory) posting? Your help will be highly appreciated. Thanks!
Jessica Mari C. Cruz
Jr. Software Development Analyst
SAP- Materials Management Team

You can get the valuation class of the Material from MBEW- BKLAS
and you can get the Valuation class, TE Key & GL Account Combination in T030 table..
You can generate a Report by Joining the above tables..

Vendor report that shows all vendors missing tax id information

I would like to create a report that shows all vendors that are missing the tax id information. Please direct me on where to go.
thx
Trace

Dear,
Enter T-code MASS.
Select Object Type LFA1 and click on execute button.
Than click on Fields tab, Find your required field and click on execute button.
Than enter vendor list for which you want to find out the list.
And click on execute button.
Regards,
Mahesh Wagh.

A Standard RRB report that shows actual project cost line items .... ?

A Standard RRB report that shows actual project cost line items but that also shows amount/qty by rejected, billed, to be billed, postponed?
I'm looking for something that will allow project managers to reconciile with the RRB totals and be able to dril in a see a level detail not available in RRB to decide what should be billed, what should should be deferred (postponed) and what should be rejected out of hand.
Thanks.

Thanks Virendra Pal but the VAx5 reports are not really the answer - maybe a custom report will be required right enough.

Screen or Report that shows all Responsibilities for Org Unit

How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
FROM FND_PROFILE_OPTIONS FPO,
FND_PROFILE_OPTION_VALUES FPOV,
FND_RESPONSIBILITY_TL FR,
HR_ALL_ORGANIZATION_UNITS HOU
--HR_OPERATING_UNITS HOU
WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
PROFILE_OPTION_NAME = 'ORG_ID'
AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

Hello Kashif,
Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
The link that you provided really did not give any information that i was looking for.
And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
I have also tried to look in the System Administrator -> Profile -> System
and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
Thank you

Cost Centre report that shows all Tax Codes

Hi there,
We're trying to run a cost centre report that shows the tax codes relating to all expenditure, but Tax Code isn't an option in KSB1. Is there a way that it can be imported, or another report that we can use?
We need the tax code in order to be able to report on expenditure and tax paid / not paid for HMRC.
Thanks,
Michelle

Hi,
Cost reports KSB1 show only CO documents posted on cost centres. You can reconcile CO data with FI only for accounts which are relevant for CO, that is accounts defined as cost elements (normally, these are P&L accounts). If you want to see all CO documents, it's better to use KSB5 transaction as it shows all CO object postings, and not only cost centres. If you have some internal CO postings (manual postings, allocation, etc.), then they won't be shown in FBL3N and you have to consider this also.
Regards,
Eli

SCCM 2012 Report that shows the users with specific software installed

Hi,
Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
1. Adobe(all versions)
2. Photoshop(all versions)
3. MS Project(all versions)
4. MS Vision(all versions)
Regards, Lorin Davis

Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

Can we create a report that show us all comments created for a specific MP

Hi All,
I have created documents for multiprovider.
Now, I want to know whether we can create a report that shows all the documents created on this multiprovider or not.
Your help will be rewarded.
Regards,
Haritha.

Check out this post: http://forums.adobe.com/message/4399918#4399918
You can use skip logic to get the desired effect. If you have problems do it just reply back.
Randy

How can i create a simple netweaver portal page that shows text and images?

Hi,
i have a simple question or maybe it's not so simple.
I am completly new to SAP Netweaver 2004s Portal. At the moment i'm trying to understand the struture of the whole thing. I already know how to create roles, worksets and pages and i know how to combine the different elements so a user can acces them.
And now i want to create a simple portal page that shows text and images. Is it possible to create such a simple page with the portal content studio? What iView do i have to use?
(I just want to create a start page with a welcome text on it.)

Marc
Considering that you would any ways go ahead with complex development from this simple start page I recommend create a Web dynpro Iview for your start page (include the Iview in your page).
For putting the contents use Netweaver Developer studio to build a simple start page application and put your static text on that Iview.
Please go through the following log after your NWDS development is over - This will make you comfortable for further challenging work.
http://help.sap.com/saphelp_erp2005/helpdata/en/b7/ca934257a5c96ae10000000a155106/frameset.htm
Do reward points if this helps and let me know of you want anything more.

Table/ Report that shows GR and PO

Similar Messages

Maybe you are looking for