SCCM 2012 Report that shows the users with specific software installed

Hi,
Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
1. Adobe(all versions)
2. Photoshop(all versions)
3. MS Project(all versions)
4. MS Vision(all versions)
Regards, Lorin Davis

Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

Similar Messages

SCCM 2012 QUERY THAT SHOWS SOFTWARE INSTALLED AND LAST TIME IT WAS USED OR OPENED

Hello
I am in need of an SCCM 2012 query that shows PCs that have Visio , Adobe Professional and Visual Studio and the last time each was used or opened. I have the query below which give me the PC name and the product. Any assistance will be very helpful
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%adobe acrobat%pro%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%viewer%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service pack%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security
update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hydra%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%MUI%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%amd%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%microsoft visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%vision%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%add-in%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
= "Microsoft Visual studio 2012 devenv" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hotfix%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service%

See me reply to your other post with the exact same details, in the CM07 forum.
http://www.enhansoft.com/

IN NEED OF A SCCM 2012 QUERY THAT SHOWS LAST TIME SOFTWARE WAS USED OR OPENED

Hello
I am in need of an SCCM 2012 query that shows PCs that have Visio , Adobe Professional and Visual Studio and the last time each was used or opened. I have the query below which give me the PC name and the product. Any assistance will be very helpful
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%adobe acrobat%pro%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
like "%visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%viewer%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service pack%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security
update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hydra%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%MUI%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%amd%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%microsoft visio%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%vision%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%add-in%"
select distinct SMS_R_System.NetbiosName, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID = SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
= "Microsoft Visual studio 2012 devenv" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%hotfix%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%security%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName
not like "%update%" and SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName not like "%service%"

Did you create a software metering rule for each software title? if not then you need you do that first and it will take over a week before you see results.
Also keep in mind that your query will only find x86 software titles.
http://www.enhansoft.com/

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

Report that shows Asset number with acquisition year and acquisition month

Hi Gurus,
Is there any standrd FA report that shows assts with acquisition year and equisition month/period.
thnx

This reprot gives you the calender year dates but we are actually for for fiscal year date and period.
Example
asset acquired on 05/01/2009 calender year
our fiscal year will be 02/01/2010. ( April to March).
we need to generate reports that shows second dates ( fiscal year 02/01/2010) and your mentioned report shows only caldender year( 05/01/09). advice if know any report
thnx

Different users with different Software installed

Hi there,
As I am rebuilding my computer and recovering my user through Time Machine, I suddenly thought about creating two separate users on my machine:
1.- Me: for my day to day usage.
2.- Developer: an account specifically targeted to install apps and/or test stuff.
In the second one I would like to be able to install apps I do not want accessible in the first and viceversa (I literally want to keep them perfectly separated so, in the case I want to rebuild my computer again, I can make a "clean restore" of user 1 while starting from scratch with user 2 to keep installing software and other testing situations.
The questions are:
A) Is this possible?
B) if so, how?
Thanks in advance

Thank you CT :-))
I do believe that would be a very feasible workaround. My fear (or my questions) goes into the following direction:
a) by doing so, are you keeping anything outside of that folder potentially affecting other programs (supposely, uninstalling apps in MacOS is clean, but there are so many apps to "completely uninstall applications" that I wonder if that is true).
b) I am looking for a programmatic solution (your solution definitely seems to be feasible, but I was looking for a system option or similar to make clear split among users within the same computer).
Thank you very much in any case :-))
Jose.

Report that shows the PO and PR number for each FI doc # of invoice posting

Hi
I want a report in SAP for PO and PR no. for each FI doc.
Thanks & Regards

There is no standard report. Through development or BI.

I am trying to create a report that shows the last payment received by BP customer

I am just looking for the last payment the most current one. I am not sure of how to write "Last" payment only. Best Danielle

Hi,
Try
select top 1 a.DocNum, a.DocDate, a.DocDueDate, b.CardName, a.DocTotal
from ORCT a
inner join OCRD b on b.CardCode = a.CardCode
where a.CardCode = '[%0]'
order by a.DocDate desc
Regards,
Alvin

Software 02D - Computers with specific software installed - Help

Want to Add Username and if possible Displayname to this report can someone tell me how to modify this report to make this happen?

More info:
Create Custom Reports for ConfigMgr 2012 with Report Builder
http://www.scconfigmgr.com/category/reporting/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to show a filter of the values in SCCM 2012 report?

I didn't see a forum for SCCM 2012 reporting, only SCCM 2007 Reporting, so I hope I am posting in the correct forum for this.
We upgraded to SCCM 2012 R2 and when running a report and entering values we can no longer type in a filter and then see a filtered list of values like in SCCM 2007.
Is there a solution for this? This was very useful especially in the Add/Remove report because many times we don't know exactly what to enter.
Below is a snapshot of what we did in SCCM 2007.

Garth, unfortunately, I don't. I was fair at SCCM 2007 reporting and modifying SQL statements, but it seems everything has changed with SCCM 2012 reporting. For the specific SCCM 2012 report I mentioned, "Computers with specific software
registered in Add Remove Programs", is there some code I could paste in somewhere to get it to operate like the SCCM 2007 report?
Are you using BIDS or Report Builder. (Keep in mind that I recommend BIDS over RP)
Here are the basic steps:
Review the SQL for the Prompt
Add a variable to the prompt
Import; refresh the SQL query within the dataset
Move that the new variable is BEFORE the existing variable
Enter in the Prompt text “Enter computer filer”
Test to make sure everything is nice
Upload the report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Report for Software registered in Add/Remove programs

Hi
Am looking to create an SCCM 2012 Report for Software registered in Add/Remove programs on windows 7 machines but dont have enough experience with report builder to do this.
Was hoping someone could help.

When i use the url i still only see the following categories
Administrative Security
Asset Intelligence
Client Push
Client Status
Compliance and Settings ManagementHave looked through them all and that one is not there
the only software ones are the following
Report Software 01A - Summary of installed software in a specific collectionThis report provides a summary of installed software ordered by the number of instances found from inventory.
Open Menu
Report Software 02A - Product families for a specific collectionThis report lists the product families and the count of software in the family for a specific collection.
Open Menu
Report Software 02B - Product categories for a specific product familyThis report lists the product categories in a specific product family and the count of software within the category. This report is linked to Software 02C - Software in a specific product
family and category.
Open Menu
Report Software 02C - Software in a specific product family and categoryThis report lists all software that is in the specified product family and category. This report is linked to Software 06B - Software by product name.
Open Menu
Report Software 02D - Computers with specific software installedThis report lists all computers with specific software installed. This report is linked to Software 02E - Installed software on a specific computer .
Open Menu
Report Software 02E - Installed software on a specific computerThis report lists all software installed on a specific computer.
Open Menu
Report Software 03A - Uncategorized softwareThis report lists the software that is either categorized as unknown or has no categorization.
Open Menu
Report Software 04A - Software configured to automatically run on computersDisplays a list of software configured to automatically run on computers.
Open Menu
Report Software 04B - Computers with specific software configured to automatically runDisplays all computers with specific software configured to automatically run.
Open Menu
Report Software 04C - Software configured to automatically run on a specific computerDisplays installed software configured to automatically run on a specific computer.
Open Menu
Report Software 05A - Browser Helper ObjectsThis report displays the Browser Helper Objects installed on computers in a specific collection.
Open Menu
Report Software 05B - Computers with a specific Browser Helper ObjectDisplays all of the computers with a specific Browser Helper Object.
Open Menu
Report Software 05C - Browser Helper Objects on a specific computerDisplays all Browser Helper Objects on the specific computer.
Open Menu
Report Software 06A - Search for installed softwareThis report provides a summary of installed software ordered by the number of instances based on search criteria for the product name, publisher, or version.
Open Menu
Report Software 06B - Software by product nameThis report provides a summary of installed software ordered by the number of instances based on selected Product Name.
Open Menu
Report Software 07A - Recently used executable programs by the count of computersThis report displays executable programs that have been used recently with a count of computers on which they have been used. The Software Metering client must be enabled for this
site to view this report.
Open Menu
Report Software 07B - Computers that recently used a specified executable programThis report displays the computers on which a specified executable program has recently been used when you enable the software metering client setting.
Open Menu
Report Software 07C - Recently used executable programs on a specified computerThis report displays executables that have been used recently on a specified computer when you enable the software metering client setting.
Open Menu
Report Software 08A - Recently used executable programs by the count of usersThis report displays executable programs that have been used recently with a count of users that have most recently used them when you enable the software metering client setting.
Open Menu
Report Software 08B - Users that recently used a specified executable programThis report displays the users that have most recently used a specified executable program when you enable the software metering client setting.
Open Menu
Report Software 08C - Recently used executable programs by a specified userThis report displays executable programs that have been used recently by a specified user when you enable the software metering client setting.
Open Menu
Report Software 09A - Infrequently used softwareThis report displays software titles that have not been used during a specified period of time. You can specify a value that will represent the number of days that have elapsed since the last use (e.g. if you
enter 90 days, you will see software that was not used in the past 90 days or more). You can also leave the Days not used field empty to see all software titles that were never used.
Open Menu
Report Software 09B - Computers with infrequently used software installedThis report displays computers which have software installed that has not been used for a specified period of time. The specified period of time is based on the value specified in the
'Software 09A - Infrequently used software' report.
Open Menu
Report Software 10A - Software titles with specific multiple custom labels definedThis report allows you to view software titles based on matching of all selected custom label criteria. Up to three custom labels can be selected to refine a software title search.
Open Menu
Report Software 10B - Computers with a specific custom-labeled software title installedThis report shows all computers in this collection, that have the specified custom-labeled software title installed.
Open Menu
Report Software 11A - Software titles with a specific custom label definedThis report allows you to view software titles based on matching of at least one of the selected custom label criteria.
Open Menu
Report Software 12A - Software titles without a custom labelThis report displays all software titles that do not have a custom label defined.
Open Menu
Report Software 14A - Search for software identification tag enabled softwareThis report provides the count of installed software with a software identification tag enabled.
Open Menu
Report Software 14B - Computers with specific software identification tag enabled software installedThis report lists all computers that have installed software with a specific software identification tag enabled.
Open Menu
Report Software 14C - Installed software identification tag enabled software on a specific computerThis report lists all installed software with a specific software identification tag enabled on a specific computer.
Open Menu

SQL Connection Failed for SCCM 2012 R2 (Unable to load user-specified certificate)

We've recently completed an upgrade from SCCM 2012 SP1 to 2012 R2 and have been running in the new environment for about a week. As of this morning, The consoles failed to connect to the CAS' and one of the Primary Site's database. The issue was resolved
easily enough by addressing a certificate issue in SQL, but I'm left wondering if there's a correlation between the SP1-to-R2 upgrade that would cause the cert to fail. Anyone have experience with this?
2014-01-21 22:10:11.81 Server      The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2014-01-21 22:10:11.81 Server      Error: 26014, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      Unable to load user-specified certificate [Cert Hash(sha1) "haaaaassssshhhh"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See
"Configuring Certificate for Use by SSL" in Books Online.
2014-01-21 22:10:11.81 Server      Error: 17182, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-01-21 22:10:11.81 Server      Error: 17182, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-01-21 22:10:11.81 Server      Error: 17826, Severity: 18, State: 3.
2014-01-21 22:10:11.81 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-01-21 22:10:11.81 Server      Error: 17120, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

We got the same certificate related error events after a fresh install of SCCM 2012 R2 on a new server. It happened during the first reboot after SCCM was installed. In the Certificates mmc, I right-clicked on the certificate used by SQL and chose Manage
Private Keys. Giving the service account that runs the MSSQLSERVER service read rights to the private key allowed SQL to start. However, after a day or so we rebooted the server again, and SQL wouldn't start. Something had removed the service account's read
permission. Since the SCCM configuration wasn't that far along, we uninstalled SCCM. After giving the service account read rights again, and rebooting several times over a few days, and SQL started every time. We then installed SCCM 2012 R2 again, and checked
the certificate's permissions before rebooting. The service account still had read permissions when the install completed, but as soon as the server was rebooted, it lost the permissions again.
The Certificates mmc was then used to request a second computer certificate and then SQL was configured to use that new certificate via SQL Server Configuration Manager. After several days and a number of reboots the SQL services have started normally every
time so the second certificate seems to have fixed the issue. I have kept the original certificate for fear that removing it will cause whatever part of SCCM 2012 R2 that modifies the original certificate to start removing permissions from the new certificate
as well.

Generate report to show all users and groups in Shared Services in EPM 11x

Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~Adeeba

Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba

Cost Centre report that shows all Tax Codes

Hi there,
We're trying to run a cost centre report that shows the tax codes relating to all expenditure, but Tax Code isn't an option in KSB1. Is there a way that it can be imported, or another report that we can use?
We need the tax code in order to be able to report on expenditure and tax paid / not paid for HMRC.
Thanks,
Michelle

Hi,
Cost reports KSB1 show only CO documents posted on cost centres. You can reconcile CO data with FI only for accounts which are relevant for CO, that is accounts defined as cost elements (normally, these are P&L accounts). If you want to see all CO documents, it's better to use KSB5 transaction as it shows all CO object postings, and not only cost centres. If you have some internal CO postings (manual postings, allocation, etc.), then they won't be shown in FBL3N and you have to consider this also.
Regards,
Eli

Report that shows managers and his/her Employees

Hello All,
Is there any standard report that shows the list of managers and his employees.
Eg:
Report should like below
ManagerObjID EmployeeObjid
When I enter a position of a manager it should give managers and employees belonging to that position.
Thanks
Venkat

hi,
u can that details from HRP1001 table.
or u can use function module RH_STRUC_GET .

SCCM 2012 Report that shows the users with specific software installed

Similar Messages

Maybe you are looking for