Table SelectionModel with Forte
Is there a way to set the SelectionModel in Sun's Forte 4 ?
I use this code by interting it with Post-Init Option.
datesTable.getSelectionModel().setSelectionModeListSelectionModel.SINGLE_SELECTION);
The problem is, if you change the name of the table the code
will hold the old name. That happens when you use the
post code generation options.
regards
Stephan
Hi Kevin.
I have updated the original post with the link to CONNECT. So feel free to upvote ;-). As you will see, it is definitively a bug in the generated deployment script. It's a pity because all the functionality around in SSDT to handle development databases
is splendid work.
The Workaround is also sketched as a little sample in the CONNECT post. Just to assisted the developers. Here is that sketch. To try it simple use a different CLR-UDT which user defined serialization.
Thanks for the pointer to open source samples. I'll give it a try.
Regards Jörg
Similar Messages
-
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
Multi-table INSERT with PARALLEL hint on 2 node RAC
Multi-table INSERT statement with parallelism set to 5, works fine and spawns multiple parallel
servers to execute. Its just that it sticks on to only one instance of a 2 node RAC. The code I
used is what is given below.
create table t1 ( x int );
create table t2 ( x int );
insert /*+ APPEND parallel(t1,5) parallel (t2,5) */
when (dummy='X') then into t1(x) values (y)
when (dummy='Y') then into t2(x) values (y)
select dummy, 1 y from dual;
I can see multiple sessions using the below query, but on only one instance only. This happens not
only for the above statement but also for a statement where real time table(as in table with more
than 20 million records) are used.
select p.server_name,ps.sid,ps.qcsid,ps.inst_id,ps.qcinst_id,degree,req_degree,
sql.sql_text
from Gv$px_process p, Gv$sql sql, Gv$session s , gv$px_session ps
WHERE p.sid = s.sid
and p.serial# = s.serial#
and p.sid = ps.sid
and p.serial# = ps.serial#
and s.sql_address = sql.address
and s.sql_hash_value = sql.hash_value
and qcsid=945
Won't parallel servers be spawned across instances for multi-table insert with parallelism on RAC?
Thanks,
MaheshPlease take a look at these 2 articles below
http://christianbilien.wordpress.com/2007/09/12/strategies-for-rac-inter-instance-parallelized-queries-part-12/
http://christianbilien.wordpress.com/2007/09/14/strategies-for-parallelized-queries-across-rac-instances-part-22/
thanks
http://swervedba.wordpress.com -
Move Table Column with AppleScript in Microsoft Word
Microsoft Word has a flaw (in my opinion) with tables in that it aligns the left and right text with the margins rather than aligning the table columns with the margins. This results in sloppy tables, because the left and right borderlines lie outside the margins.
I would like to fix the word tables by
calculating the left cell padding and right cell padding in points and setting them to variables {left_pad,right_pad} respectively
move left column by left_pad to the right
move right column by right_pad to the left
The script I was working on does not work, but I will post it to show my thought process as I hone in on my solution.
tell application "Microsoft Word"
--595 points is width of A4 paper
-- Set page margin in points to variables
set {l_margin, r_margin, t_margin, b_margin} to {(get left margin of page setup of active document), get (right margin of page setup of active document), get (top margin of page setup of active document), get (bottom margin of page setup of active document)}
get {l_margin, r_margin, t_margin, b_margin}
-- Set specific Paragraph margins
-- NOTE: If you select a table thinking you wish to drag just the left margin to the right, or the right margin to the left, this code does not accomplish this because each cell has its own paragraph formatting. This code will set the margin for every single cell, because each cell has its own margins! (separate from padding).
set para_sel to paragraph format of selection
set paragraph format left indent of para_sel to (centimeters to points centimeters 0.5)
-- Aligning left and right columns of table with the margins
-- NOTE: There is a command to set left row indent, but not right row indent (very stupid of Microsoft)
end tellI have worked up something that seems to work (although I cannot promise it is the best way). Hope it helps anyone else who has this need.
tell application "Microsoft Word"
activate
set findRange to find object of selection
clear formatting findRange -- clear any previous formatting used in a find operation
set forward of findRange to true -- find forward
set style of findRange to "List Bullet" -- the style to look for
tell findRange
set gotIt to execute find find text "" -- do the search w/o matching any text
end tell
if gotIt is true then -- if a match was found
copy object selection -- copy it to the clipboard
set mySelection to (the clipboard) -- then put clipboard into a variable
set myOffset to ¬
(get selection information selection information type ¬
(horizontal position relative to page)) -- now put selection info into a variable
display dialog mySelection & return & (myOffset as text) -- then display it
end if
end tell -
Hiding Table Columns with the Spry Element Selector
I am trying to set up a toggle button that will show/hide
rows >1 when clicked. I've used Adobe's
"Hiding
Table Columns with the Spry Element Selector" example and it
worked fine with an HTML list, until I linked to actual XML data.
Now it works in reverse. What gives?
Here's the example:
http://a44.awardspace.com/testing/toggleShowHideRows.htmThat's what I started with. Same result:
http://a44.awardspace.com/testing/toggleShowHideRows.htm -
How to bind internal table values with RootUIElement(Table) from select Que
Hello Friends,
In my view Layout,there r two Input fields ,Submit button and Table... My concept is when user posting values in two input fields and clicking submit button means the result(more than one values) should be displayed in Table...
I written coding also but i dont know to bind internal table values with Table... My code as follows,
method onactionsearch .
data:
Node_Node_Flight type ref to If_Wd_Context_Node,
Elem_Node_Flight type ref to If_Wd_Context_Element,
Stru_Node_Flight type If_View1=>Element_Node_Flight ,
itab TYPE STANDARD TABLE OF sflight.
navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
@TODO handle not set lead selection
if ( Node_Node_Flight is initial ).
endif.
get element via lead selection
Elem_Node_Flight = Node_Node_Flight->get_Element( ).
@TODO handle not set lead selection
if ( Elem_Node_Flight is initial ).
endif.
alternative access via index
Elem_Node_Flight = Node_Node_Flight->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Node_Flight is initial ).
endif.
get all declared attributes
Elem_Node_Flight->get_Static_Attributes(
importing
Static_Attributes = Stru_Node_Flight ).
select * from sflight into CORRESPONDING FIELDS OF TABLE itab
WHERE carrid = Stru_Node_Flight-carrid and connid = Stru_Node_Flight-connid.
Node_Node_Flight->bind_table( new_items = itab ).
endmethod.
Plz reply me asap...!Hi,
What I understood from your coding is...
* navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
You are reading values from the above node and binding the values to the same node.Am i right?
Did you take seperate context node for your input fields or binded the above context to the fields.If not then read the context attribute values which are binded to the carrid and connid then pass these values to select query.
One more thing is select cardinality 1..n for node NODE_FLIGHT since you are displaying more than one record.
Go through the some basic tutorials.Search in sdn you will it get.Already there is a tutorial in sdn which explains exactly what do you require.
Go throgh this link
Web Dynpro for ABAP: Tutorials for Beginners
Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
Edited by: suman kumar chinnam on Mar 26, 2009 10:50 AM -
BDC: How to enter data in Table control (With wizard) using scrolling?
Using BDC, I am trying to enter the data in the table control (with wizard).
I want to know what is the specific command to scroll down in table control (With Wizard).
While recording I am getting these steps:
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
When I use above command and run BDC, it does not scroll.
Kindly let me know where am I going wrong.
Thanks in advance for your kind help.
AshishThe transaction is CK94
and the BDC recording is :
T CK94
SAPLCKBASCR1 0200 X
BDC_CURSOR CKI94A-BDATJ
BDC_OKCODE =ENTR
CKI94A-MATNR 10000789
CKI94A-WERKS VA79
CKI94A-BDATJ 2005
CKI94A-MGTYP ZDU01
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MISCH_VERH(02)
BDC_OKCODE /00
CKI94B-MIXCOST_PC(01)
CKI94B-MIXCOST_PC(02) X
CKI94B-MISCH_VERH(01)
CKI94B-MISCH_VERH(02) 40
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MISCH_VERH(07)
BDC_OKCODE /00
CKI94B-MIXCOST_PC(07)
CKI94B-MISCH_VERH(07) 60
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE =STOR
BDC_OKCODE '/00' is recorded when I scroll down in the table control.
Thanks for your kind concern.
Ashish -
How to Populate a Dropdown field for a table control with different keys
Hi All,
I have Table control with abt eight columns (fields). Out of these eight field one field is with dropdown list. In table control Project ID is Primary key column. Depending upon this Project ID value, i have different values which is to be populated in dropdown boxes. In table control if there is only one project ID value say 'P000715' i can populate it but when i have more than one project ID (P000715, p000716, P000717.....) in display in rows of table control i want to have different values in my dropdown field corresponding to that row of project id. Experts please tell me how to achieve this functionality.
Thankx in Advance
Rizwan Ahmad SiddiquiThe only way you may be able to do this is using
MODULE PROCESS ON VALUE-REQUEST. User-programmer F4 help
in your PAI routine.
In this routine you would build the list and get the returned value to update the field.
Something like this.
DATA: BEGIN OF value_tab OCCURS 0,
field1 TYPE zlmltype,
field2 TYPE zltypex,
END OF value_tab.
* Drop down values
REFRESH it_return_tab. CLEAR it_return_tab.
REFRESH value_tab. CLEAR value_tab.
SELECT ltype ltypex
INTO TABLE value_tab
FROM zlmltyp
WHERE auth NE '9'. "System Only
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'FIELD1'
value_org = 'S'
TABLES
value_tab = value_tab[]
return_tab = it_return_tab.
READ TABLE it_return_tab INDEX 1 INTO wa_return_tab.
CHECK sy-subrc EQ 0.
p_pleadtyp = wa_return_tab-fieldval. -
RE: Using CORBA as Middleware with Forte'
This is one solution when the two sides want to be somewhat independent of
each other.. To use Forte messaging the environments have to be connected,
identical Forte versions, probably identical versions of all objects
involved (rather than just correct IDL), etc. I've toyed with this as well
for a client with two major Forte application development efforts occurring
in completely different business units.
-Greg
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, October 22, 1998 1:56 PM
To: Giuseppe Sorce; Lenny Hon
Cc: [email protected]
Subject: Re: Using CORBA as Middleware with Forte'
If you don't mind me asking, why would you ever want to do this? If
you are
talking between two Forte services, why would you not want to use
the native
protocol which is bound to be more efficient since it was written
specifically for that purpose? The only reason I can think of is if
you
need two Forte services to talk to each other through a firewall and
the
firewall is configured to only allow certain protocols through, such
as
IIOP. Is this what you are trying to do? If not, what is your
reasoning?
Thanks,
Sean Brown
Cornice Consulting Inc.
mailto:[email protected]
-----Original Message-----
From: Giuseppe Sorce <[email protected]>
To: Lenny Hon <[email protected]>
Cc: [email protected] <[email protected]>
Date: Thursday, October 22, 1998 10:05 AM
Subject: RE: Using CORBA as Middleware with Forte'
>
>Lenny, I'm sorry but I think that my problem is more complicated.
>No java clients or java servers are involved: I want to use CORBA
as
>middleware between 2 different Forte' partitions (running on
different
>forte' environments).
>For example imagine you have 2 different Forte' applications (say
>application A and application B) in 2 different forte'
environments.
>Now imagine to define an IIOP-enabled service object (Inbound) in
>application A and, starting from the generated IDL (using corbagen
utility)
>to create a IIOP-enabled service object (Outbound) in application
B.
>Application B will be the Corba Client and application A will be
the Corba
>Server.
>They don't use Forte' middleware for communication (they are in
different
>Forte' envs).
>
>Giuseppe Sorce
>
>
>
>
>
>Lenny Hon <[email protected]> on 22/10/98 15.35.40
>
>Please respond to Lenny Hon <[email protected]>
>
>To: Giuseppe Sorce/CSI/IT, "'[email protected]'"
> <[email protected]>
>cc:
>Subject: RE: Using CORBA as Middleware with Forte'
>
>
>
>
>I have successfully used Forte IIOP-enabled service object to
communicate
>with my client Java program that uses VisiBroker 3.2 for Java ORB.
For the
>information, you can read the Forte Web Enterprise manual and the
following
>tech notes: 10950, 10951, 11145, 11152. I found them from Web
manual.
>
>Lenny Hon
>
>-----Original Message-----
>From: Giuseppe Sorce [mailto:[email protected]]
>Sent: Thursday, October 22, 1998 5:58 AM
>To: [email protected]
>Subject: Using CORBA as Middleware with Forte'
>
>
>
>I would like to find a way to use CORBA middleware as an
alternative for
>communications between Forte' partitions (I'm using Forte' rel.
3.0.G plus
>Visibroker 3.1 ORB).
>
>I found a technical note (ID 10520) but it is quite old and it is
related
> to Forte' release 2.0.E.2 (!).
>
>Any experience with Forte' release 3 and Visibroker would be
greatly
> appreciated.
>
>
>
>TIA
>
>Giuseppe Sorce
>
>CSI Piemonte - C.so Unione Sovietica 216 - 10134 Torino - ITALY
>
>tel. +39-011-3168736
>
>fax +39-011-3168212
>
>e-mail [email protected]
>
>url http://www.csi.it
>
>
>
>-
>To unsubscribe, email '[email protected]' with
>'unsubscribe forte-users' as the body of the message.
>Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
>-
>To unsubscribe, email '[email protected]' with
>'unsubscribe forte-users' as the body of the message.
>Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
>
>
>
>
>
>
>-
>To unsubscribe, email '[email protected]' with
>'unsubscribe forte-users' as the body of the message.
>Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>This is one solution when the two sides want to be somewhat independent of
each other.. To use Forte messaging the environments have to be connected,
identical Forte versions, probably identical versions of all objects
involved (rather than just correct IDL), etc. I've toyed with this as well
for a client with two major Forte application development efforts occurring
in completely different business units.
-Greg
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, October 22, 1998 1:56 PM
To: Giuseppe Sorce; Lenny Hon
Cc: [email protected]
Subject: Re: Using CORBA as Middleware with Forte'
If you don't mind me asking, why would you ever want to do this? If
you are
talking between two Forte services, why would you not want to use
the native
protocol which is bound to be more efficient since it was written
specifically for that purpose? The only reason I can think of is if
you
need two Forte services to talk to each other through a firewall and
the
firewall is configured to only allow certain protocols through, such
as
IIOP. Is this what you are trying to do? If not, what is your
reasoning?
Thanks,
Sean Brown
Cornice Consulting Inc.
mailto:[email protected]
-----Original Message-----
From: Giuseppe Sorce <[email protected]>
To: Lenny Hon <[email protected]>
Cc: [email protected] <[email protected]>
Date: Thursday, October 22, 1998 10:05 AM
Subject: RE: Using CORBA as Middleware with Forte'
>
>Lenny, I'm sorry but I think that my problem is more complicated.
>No java clients or java servers are involved: I want to use CORBA
as
>middleware between 2 different Forte' partitions (running on
different
>forte' environments).
>For example imagine you have 2 different Forte' applications (say
>application A and application B) in 2 different forte'
environments.
>Now imagine to define an IIOP-enabled service object (Inbound) in
>application A and, starting from the generated IDL (using corbagen
utility)
>to create a IIOP-enabled service object (Outbound) in application
B.
>Application B will be the Corba Client and application A will be
the Corba
>Server.
>They don't use Forte' middleware for communication (they are in
different
>Forte' envs).
>
>Giuseppe Sorce
>
>
>
>
>
>Lenny Hon <[email protected]> on 22/10/98 15.35.40
>
>Please respond to Lenny Hon <[email protected]>
>
>To: Giuseppe Sorce/CSI/IT, "'[email protected]'"
> <[email protected]>
>cc:
>Subject: RE: Using CORBA as Middleware with Forte'
>
>
>
>
>I have successfully used Forte IIOP-enabled service object to
communicate
>with my client Java program that uses VisiBroker 3.2 for Java ORB.
For the
>information, you can read the Forte Web Enterprise manual and the
following
>tech notes: 10950, 10951, 11145, 11152. I found them from Web
manual.
>
>Lenny Hon
>
>-----Original Message-----
>From: Giuseppe Sorce [mailto:[email protected]]
>Sent: Thursday, October 22, 1998 5:58 AM
>To: [email protected]
>Subject: Using CORBA as Middleware with Forte'
>
>
>
>I would like to find a way to use CORBA middleware as an
alternative for
>communications between Forte' partitions (I'm using Forte' rel.
3.0.G plus
>Visibroker 3.1 ORB).
>
>I found a technical note (ID 10520) but it is quite old and it is
related
> to Forte' release 2.0.E.2 (!).
>
>Any experience with Forte' release 3 and Visibroker would be
greatly
> appreciated.
>
>
>
>TIA
>
>Giuseppe Sorce
>
>CSI Piemonte - C.so Unione Sovietica 216 - 10134 Torino - ITALY
>
>tel. +39-011-3168736
>
>fax +39-011-3168212
>
>e-mail [email protected]
>
>url http://www.csi.it
>
>
>
>-
>To unsubscribe, email '[email protected]' with
>'unsubscribe forte-users' as the body of the message.
>Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
>-
>To unsubscribe, email '[email protected]' with
>'unsubscribe forte-users' as the body of the message.
>Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
>
>
>
>
>
>
>-
>To unsubscribe, email '[email protected]' with
>'unsubscribe forte-users' as the body of the message.
>Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Applying table scroll bar for only table rows with table columns fixed.
hi oa gurus,
i had implemented table scroll bars using oarawtextbean , there is no problem in vertical and horizontal scroll bar working its working fine. but the requirement is i need to scroll only the table rows with table columns fixed. so , how to achieve the table scroll for only table datas neglecting table headers.
the code for vertical and horizontal bars scroll is like this,
OARawTextBean ors = (OARawTextBean)webBean.findChildRecursive("raw1");
ors.setText(div id=tabledivid style=height:500px;width:100%; overflow:auto>);
OARawTextBean ore = (OARawTextBean)webBean.findChildRecursive("raw2");
ore.setText("</div>");
where raw1 and raw2 are rawtextbean created above and below of the table . but i dont know hoow to apply this only for table rows neglecting table columns , can anybody give any ideas.
pelase this is very urgent , can u help me in this regards
thanks
Edited by: user630121 on Sep 29, 2008 5:17 AM
Edited by: user630121 on Sep 29, 2008 5:18 AMhi,
I have a similar task to do... Only to apply scrollbar at the table level.
I tried using the above mentioned but I am facing Null Pointer Exception..
Please explain about raw1 and raw2
Rahul -
Table Relation with Payment and Invoice of Vendor
Hi all,
I have one question about Table Relation with Payment and Invoice of Vendor.
the scenario is.
2 Purchase Order number : 100000001/100000002
1 Invoice document number : 200000001 which include 2 Purchase Order.
1 Payment document number : 300000001
How should I found out table relation from Payment document number - Invoice document number - Purchase Order number. ?
I try to link the following table, but it does not work.
RBKP * Invoice Receipt
RSEG * Invoice Receipt document line item
BKPF * Accounting Document Header
BSEG * Accounting Document Segment
PAYR Payment Medium File
BSIK Accounting: Secondary Index for Vendors
BSAK Accounting: Secondary Index for Vendors (Cleared Items)
BSIS Accounting: Secondary Index for G/L Accounts (Open Items)
Does any one know about it ?
Regards
KY ChuangHi Venkatesh,
Thnx a lot for the reply. This has almost solved my problem, however there's one thing left. when I'm trying to take a print out after exporting the info into an excel sheet, the information really looks scattered, i.e., is there a way where we can go ahead and get the info in a rather unscattered manner.
I've tried to take a print directly without actually transferring the info into an excel sheet, then each of the vendor is printed in a separate page, which again they feel is a problem.
So, if you have an idea pls suggest.
Thnx again for the information.
regards
sandhya -
How to rerieve records from the table starting with character 'D'
Hi Folks,
How to get the records from the table starting with character 'D'.
Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'.
last record in the table starting with character 'D'
How can i do that??
Pl explain.
Thanks,
MattHi,
Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'.
Select MAX (fld1)
From tab1
into table itab
where fld 2 = l_fld2
and fld1 like 'D%'. -
How to interface a windows DLL with Forte application?
Hi,
I want to use crystal report engine for generating reports from Forte
application on NT client, which requires interfacing crpe32.dll(report
engine DLL) with Forte. Can somebody help me out with a sample c project
(Forte project) either for crpe32.dll or any other DLL.
What are the requirement for for interfacing a DLL library with Forte
application .
Thanks in advance
Shashidahr Patil N S
BangaloreYou can make an empty server only with tpsvrinit that starts your client
listeners and a tpsrvdone that stops them. Be carefull with sharing ipcs
between processes, or your clients may get puzzled!!!
Another choice can be builting a custom WSL/WSH but I haven't done
this yet and I don't know exactly the troubles related with making them.
R.G.
Travis Ward wrote:
How would you interface a tuxedo app with another application that
uses tcp/ip socket messaging? I have a vendor product that offers
a tcp/ip message interface, and would like to know how best to
integrate it into a tuxedo application. I could write a C application
that listens and accepts incoming request from the vendors application,
and then make a tuxedo client call to a service. But this doesn't
allow me to control the listen thread through tuxedo. The C application
would have to be started seperately and would not take advantage
of the tuxedo restart facilities etc of a tuxedo service. -
Table Controller With 1:N Relationship
I'm looking at implementing a table controller with a 1:N relationship as per the following blog post: http://blogs.msdn.com/b/azuremobile/archive/2014/06/18/insert-update-related-data-with-1-n-relationship-using-net-backend-azure-mobile-services.aspx
However, when I run the sample solution given, an exception is thrown when I call the following controller method:
public SingleResult<TodoItemDTO> GetTodoItem(string id)
return Lookup(id);
The exception thrown:
The LINQ expression node type 'Invoke' is not supported in LINQ to Entities.
The sample solution can be found here: https://github.com/pragnagopa/BlogSamples/tree/master/InsertUpdateRelatedData
Can anyone explain why this is not working?Hi,
As per you requirement, it seems like a Field in main table is look up to Flat table which contains Two fields say Field A and Field B both as display fields. Field A has two values 100 and 200 only and Field B has six values P, Q, R, X, Y, Z.
You want whenever you select Field A as 100 then only P, Q, R comes.
I firmly believe that this is not achievable as per MDM capability using Fields. But you can run Validations to cross check that if it is 100 then correspondingly value of Field B should be from P, Q and R only. IIy, for 200 it should be from X, Y and Z.
Alternatively, I can suggest you to go for Taxonomy. Create 2 categories say category name Field100 and Field200.
Field100 category is linked with attribute 100 which has values P, Q and R.
Field200 category is linked with attribute 200 which has values X, Y and Z.
So whenever you select category Field100 associated linked attribute 100 will come and whose values can be populated using P, Q and R only.
lly, when you select category Field200 associated linked attribute 200 will come and can be populated using X,Y and Z only. Whenever for a record in main table you select this category field as Field100 and Field200 correspondingly linked Attribute comes with Predefined set of legal values.
Thanks and Regards,
Mandeep Saini -
Unique file name to be decoded and to be updated in a table along with data
Hi
I'm working on a File to Proxy scenario, where the file names(10 chars length) are unique. These files will be available for XI in a source directory. My requirement is -- file name need to be decoded into 3 values and to be updated into a r/3 database table along with the file data.
Hope my requirement is clear.
Thanks.You cannot see the field which stores the file name. The file name comes from payload at runtime.
Secondly no need to create any input parametes in your UDF, just edit your udf and delete the input parameter (default input is 'a') so that you don't have to map any constant to this UDF just map this UDF to target field.
e.g. UDF ---> target Field.
I did the same but am not able to activate the mapping.
Mapping activation Error:
Activation of the change list canceled Check result for Message Mapping hello_mapping | http://briks.com:
Mapping not sufficiently defined
Chennai.
Maybe you are looking for
-
Effect of Full Attribute Extract on Aggregate Attribute Change Run
Because we extract data that does not trigger the change pointer on 0CUST_SALES we do a FULL extract of this data daily instead of a DELTA. We recently created an aggregate which contains navigational attributes of 0CUST_SALES (namely Sales Office &
-
Context Menu "Send To" mail text
Hi, I am trying to explore the options available with in context menu -> send to mail option inside km document explorer view. The requirement is to change the text displayed in the form which is opened when users selects context menu -> send to opti
-
Exporting pdf with spot colour
Hi, Im having trouble exporting a pdf with a spot colour from ID. Just one part of my logo is showing as thicker once its exported. I can place in the exact same artwork but using a CYMK colour and the thick shape doesnt show. does any one know why t
-
CS4 EPS PROBLEMS FROM ILUSTRATOR TO InDesign
Hi, Original illustrator file, simple line, looks good in .ai Also looks good as an .eps in Illustrator. When brought into CS4 InDesign we see very fine, faint bitmapped negative lines - - as if the .eps was not fully drawn. We have remedied this b
-
The page where i include my password is gone
Can someone help me? For some reason my Mac is not showing the first page where I should login and type my password... I have no idea why its missing. It was working yesterday but I installed Firefox again and now its gone. What should I do? I alread