Table.setRowSelectionInterval(a,a)select with yellow color why
Hi
table.setRowSelectionInterval(a,a);
Why duos this method selects around the cell
With a yellow color not blue like when I mouse click
Thanks
maybe resetting the colour to another one and then revert back to original if it works...
Hope this helps.
Best wishes
Shirley
Similar Messages
-
Check syntax of process chain get three variants with yellow color
When I click the "Checking View" picture icon to check the syntax of process chain, find there are three variants with yellow color. All the displaying msgs of the three yellow color variants says:
There must be a type "Read PSA and Update Data Target" process behind process "Execute InfoPackage" var.ZPAK_3WN4PJ43QNW7DC2Z3ZV532ZFF in the chain
What does this mean? Do we have to take care of the three yellow color errors?
ThanksHi Kevin,
Sometimes you need to instruct process chains explicitly. Even though you have it mentione din your InfoPackage, still it needs another process (and variant) to load from the PSA to the data target. In the RSPC screen where all the processes are listed on the left hand side, under Load Processes and Post Processing, you will find Read PSA and Update Data Target as the second process.
Hope this helps... -
Why my mails in inbox are marked with yellow color?
hello to all,
if someone knows why is this happening, pleas help.
All the rest is working great, the only problem is the color of my new mails in the mail list is yellow.
It started to mark it with that color a month ago, all the other mails are as normal ( no color)
Tony,maybe resetting the colour to another one and then revert back to original if it works...
Hope this helps.
Best wishes
Shirley -
Af:table range navigation and select with rownum
I'm trying to use af:table to display some data (long list), but the value attribute always returns the entire list. (Basic example)
I'd like to use the range navigation so the application only select a sublist from the database (using rownum between x and y) and also display the navigation pane with all the pages, but I was only able to get the specific page with no navigation pane.
Does anyone have a good example on how to use the range navigation with selects/rownum?Assuming I have an untitled1.jspx page with an Untitled1.java backing bean and an <af:table> on my page whose whose binding attribute is set to the EL expression #{Untitled1.table} to expose the table UI component in the backing bean, and a rangeChangeListener set to the EL expression #{Untitled1.onRangeChanged}, then with the following backing bean class, I seem to have been able to disable the user's picking the "Show all" option. It still appears in the list, but visually picking it stays on the current range of rows.
package test.backing;
import oracle.adf.view.faces.component.core.data.CoreTable;
import oracle.adf.view.faces.event.RangeChangeEvent;
public class Untitled1 {
private CoreTable table;
public Untitled1() {
public void onRangeChanged(RangeChangeEvent rangeChangeEvent) {
int newStart = rangeChangeEvent.getNewStart();
int newEnd = rangeChangeEvent.getNewEnd();
if (newEnd - newStart > getTable().getRows()) {
int oldEnd = rangeChangeEvent.getOldEnd();
int oldStart = rangeChangeEvent.getOldStart();
queueRangeChangeEventForTable(newStart, newEnd, oldStart, oldEnd);
private void queueRangeChangeEventForTable(int oldStart, int oldEnd,
int newStart, int newEnd) {
RangeChangeEvent rce =
new RangeChangeEvent(getTable(), oldStart, oldEnd, newStart, newEnd);
getTable().queueEvent(rce);
public void setTable(CoreTable table) {
this.table = table;
public CoreTable getTable() {
return table;
} -
Fully filling a selection with certain color
Hello!
I'm trying to fill a selected region using Edit -> Fill...
However, pixels at the periphery of the region are not changed to the desired color exactly, but a lighter/darker one.
Is there a way to replace every single pixel inside a region with a certain color?
Thanks!He/she means when making the selection.
Feather should be 0px, Anti-alias should be unchecked.
-Noel -
Update table based on a select with a where clause
I am trying to update a table only for records where i have a status of changed.
Using the following code the update changes all the records putting in blank data if it is outwith the where clause.
ideas?
-- Update changed records
UPDATE IP_SURVEY_ACTIVITY_REG_NO old
SET (
old.SLPN,
old.SURVEY_DATE,
old.SEQUENTIAL_REF_NUMBER,
old.TOTAL_NUM_OF_SAMPLES,
old.TOTAL_NUM_OF_ASSOC_SAMPLES,
old.AIR_TESTS,
old.REMARKS,
old.SURVEY_DETAILS,
old.FURTHER_SURVEY_DETAILS,
old.GENERAL_COMMENTS) =
(SELECT
new.SLPN,
new.SURVEY_DATE,
new.SEQUENTIAL_REF_NUMBER,
new.TOTAL_NUM_OF_SAMPLES,
new.TOTAL_NUM_OF_ASSOC_SAMPLES,
new.AIR_TESTS,
new.REMARKS,
new.SURVEY_DETAILS,
new.FURTHER_SURVEY_DETAILS,
new.GENERAL_COMMENTS
FROM IP_SURVEY_ACTIVITY_REG_NO_INT new
WHERE new.load_id = v_load_id
AND new.status = 'CHANGED'
AND new.sarn = old.sarn);
cheers bjornThe EXISTS claue just needs to be added to your original query as a predicate on the ip_survey_activity_reg_no table. somethign like:
UPDATE ip_survey_activity_reg_no old
SET (old.slpn, old.survey_date, old.sequential_ref_number,
old.total_num_of_samples, old.total_num_of_assoc_samples,
old.air_tests, old.remarks, old.survey_details,
old.further_survey_details, old.general_comments) =
(SELECT new.slpn, new.survey_date,
new.sequential_ref_number,
new.total_num_of_samples,
new.total_num_of_assoc_samples, new.air_tests,
new.remarks, new.survey_details,
new.further_survey_details,new.general_comments
FROM ip_survey_activity_reg_no_int new
WHERE new.load_id = v_load_id and
new.status = 'CHANGED' and
new.sarn = old.sarn)
WHERE EXISTS (SELECT 1 FROM ip_survey_activity_reg_no_int new
WHERE new.load_id = v_load_id and
new.status = 'CHANGED' and
new.sarn = old.sarn)An updateable join view is similar, except you just join the two tables. Assuming that sarn is the primary key of ip_survey_activity_reg_no_int, or is at least declared as unique in that table, then the update of the join would look something like:
UPDATE (SELECT old.slpn oslpn, old.survey_date osurvey_date,
old.sequential_ref_number osequential_ref_number,
old.total_num_of_samples ototal_num_of_samples,
old.total_num_of_assoc_samples ototal_num_of_assoc_samples,
old.air_tests oair_tests, old.remarks oremarks,
old.survey_details osurvey_details,
old.further_survey_details ofurther_survey_details,
old.general_comments ogeneral_comments,
new.slpn nslpn, new.survey_date nsurvey_date,
new.sequential_ref_number nsequential_ref_number,
new.total_num_of_samples ntotal_num_of_samples,
new.total_num_of_assoc_samples ntotal_num_of_assoc_samples,
new.air_tests nair_tests, new.remarks nremarks,
new.survey_details nsurvey_details,
new.further_survey_details nfurther_survey_details,
new.general_comments ngeneral_comments
FROM ip_survey_activity_reg_no old, ip_survey_activity_reg_no_int new
WHERE new.sarn = old.sarn and
new.status = 'CHANGED' and
new.load_id = v_load_id)
SET oslpn = nslpn,
osurvey_date = nsurvey_date,
osequential_ref_number = nsequential_ref_number,
ototal_num_of_samples = ntotal_num_of_samples,
ototal_num_of_assoc_samples = ntotal_num_of_assoc_samples,
oair_tests = nair_tests,
oremarks = nremarks,
osurvey_details = nsurvey_details,
ofurther_survey_details = nfurther_survey_details,
ogeneral_comments = ngeneral_commentsHTH
John
Message was edited by:
John Spencer
Honest, Eric wasn't there when I posted :-) -
Server0 keeps standing with yellow color
Dear experts,
My J2EE engine keep the status Start Apps on the Console Management for a long time, instead of changing to Running. I cover the log file and have some confused thing, pls help me to find the solution.
"SAPJarResourceCloseTimeoutThread" daemon prio=5 tid=0x07b99b10 nid=0x1594 in Object.wait() [9c4f000..9c4fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x17810138> (a com.sap.engine.frame.core.load.res.JarThread)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.frame.core.load.res.JarThread.run(JarThread.java:32)
- locked <0x17810138> (a com.sap.engine.frame.core.load.res.JarThread)
"Thread-14" daemon prio=5 tid=0x07cd8410 nid=0x157c in Object.wait() [9c0f000..9c0fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x17812350> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <0x17812350> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at com.sap.engine.cache.util.ReferenceQueueRunnable.run(ReferenceQueueRunnable.java:43)
at java.lang.Thread.run(Thread.java:534)
"Background Jobs Internal Thread" daemon prio=5 tid=0x078b44e0 nid=0x15a8 in Object.wait() [9bcf000..9bcfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x17812378> (a java.lang.Object)
at com.sap.engine.cache.job.impl.BackgroundExactImpl.run(BackgroundExactImpl.java:134)
- locked <0x17812378> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:534)
"Timeout Service Integrity Watcher Thread" daemon prio=10 tid=0x080f5008 nid=0x1648 runnable [9b8f000..9b8fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x178123e0> (a com.sap.engine.cache.job.impl.IntegrityWatcher)
at com.sap.engine.cache.job.impl.IntegrityWatcher.run(IntegrityWatcher.java:54)
- locked <0x178123e0> (a com.sap.engine.cache.job.impl.IntegrityWatcher)
at java.lang.Thread.run(Thread.java:534)
"Background Jobs Internal Thread" daemon prio=5 tid=0x07fccad8 nid=0x1644 in Object.wait() [9b4f000..9b4fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x17812420> (a java.lang.Object)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.cache.job.impl.BackgroundExactImpl.run(BackgroundExactImpl.java:115)
- locked <0x17812420> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:534)
"Timeout Service Integrity Watcher Thread" daemon prio=10 tid=0x07c786e8 nid=0x1640 runnable [9b0f000..9b0fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x17812468> (a com.sap.engine.cache.job.impl.IntegrityWatcher)
at com.sap.engine.cache.job.impl.IntegrityWatcher.run(IntegrityWatcher.java:54)
- locked <0x17812468> (a com.sap.engine.cache.job.impl.IntegrityWatcher)
at java.lang.Thread.run(Thread.java:534)
"Finalizer" daemon prio=9 tid=0x010f06a0 nid=0x1304 in Object.wait() [34bf000..34bfd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x17816680> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <0x17816680> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x010efa88 nid=0x1300 in Object.wait() [347f000..347fd94]
at java.lang.Object.wait(Native Method)
- waiting on <0x178137f8> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:429)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:115)
- locked <0x178137f8> (a java.lang.ref.Reference$Lock)
"main" prio=5 tid=0x003d49b0 nid=0x1408 in Object.wait() [619af000..619afe1c]
at java.lang.Object.wait(Native Method)
- waiting on <0x178166a0> (a com.sap.engine.boot.StartFrame)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.boot.StartFrame.work(StartFrame.java:121)
- locked <0x178166a0> (a com.sap.engine.boot.StartFrame)
at com.sap.engine.boot.Start.main(Start.java:34)
Pls help!!!
Thanks in advance,Hi Pham,
I am not sure whether this will help or not, but can you check whether the server service is running or not?
Go to services.msc in the run command and start the service named server if it is in stopped state.
Bye
Ankur -
Select with no conditions taking long time, too many blocks, pctused?
select * from at_journal;is taking 15 seconds, which is absurd. I have similar situations with other log tables in this system.
(selecting with rownum < 5 and with first_rows hint still takes 15 seconds)
Suspicious parameters:
PCT_FREE 1
PCT_USED 99
(Some other log tables have PCT_FREE 5, PCTUSED 90)
The tables have frequent inserts, once every day all records older than 90 days get deleted.
After computing statistics:
Blocks: 42,304 (seems absurdly high)
Size: 663 Mb
NUM_ROWS: 505,966
After copying data without compression to new table:
Blocks: 3,785
Size: 60 Mb
NUM_ROWS: 505,966
The select on the new table is instantaneous.
On a side note, in general is compression for a table with frequent deletes OK? It seems OK to me.
Storage parameters of table creation script:
PCTUSED 99
PCTFREE 1
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
NOMONITORING;I imagine that most blocks for the table are empty. In my mind pctused of 99 means most of the block space should be full. I have read several explanations of PCTUSED/pctfree including oracle documentation and it seems pctused of 99 means the block should be 99% full.
Much thanks,
googoo wrote:
I imagine that most blocks for the table are empty. In my mind pctused of 99 means most of the block space should be full. I have read several explanations of PCTUSED/pctfree including oracle documentation and it seems pctused of 99 means the block should be 99% full.Hello, you don't give your database version, but if you were using Automatic Segment Space Management you would not need to worry about the PCTUSED setting, and it could be that you already are:
1 select tablespace_name, segment_space_management
2 from dba_TABLESPACES
TABLESPACE_NAME SEGMEN
SYSTEM MANUAL
SYSAUX AUTO
UNDOTBS1 MANUAL
TEMP MANUAL
USERS AUTO
EXAMPLE AUTOAnd if you are already using ASSM, then the PCTUSED is not an issue (PCTFREE still applies, but it's not an issue in your case).
goo wrote:
On a side note, in general is compression for a table with frequent deletes OK? It seems OK to me.Frequent DELETEs could be an issue because they will not reset the High Watermark, though there will not be a performance penalty because of the compression for DELETEs (the record only needs to be located for a DELETE, not decompressed). Your PCTUSED, however, is high enough so that any newly deleted record slots should be quickly reused, but... it depends on how those new records are being INSERTed. If, as Daniel says, the HWM is being effectively bypassed (Direct Path INSERTs, etc.), then the table will grow in size every day, but the volume of records effectively stays just about the same.
Have a look at how the new records are being added to that table, if it's a:
INSERT /*+ APPEND */ INTO tableA
SELECT...Then the HWM is being advanced, and the newly vacated slots from the DELETEd records are not being reused. So the table will continually grow, for roughly the same amount of data, and there'll be a proportionately longer data retrieval time. -
Please, kindly help to find out why Photoshop fills a selection with transparent color while opacity and fill of a layer are set to 100% and blending modes are “normal”
Thank you!Olga,
In that case I have no idea, sorry.
Only thing I can think off is to reset the preferences. When Photoshop is acting up this will sometimes make Photoshop behave.
But before you do this make sure you backup your actions, gradients, shapes, brushes etc or you will lose the ones you made yourself. -
ALV - How to hide yellow color in first cell
Hello ALV experts!
I am using 7 ALV layouts in one screen with one main screen and 6 small layouts with nine cells each. My objective is to enter data data in main ALV which updates the cells in the remaining ALV layouts.
In all the six ALV alyouts, I am getting the first cell with yellow color (highlighted) which makes screen look awkward. Do you have any idea how to hide that color. ALso I would apprecaite if any of you know how to make the column fixed (when you pull the vertcal line between columns, it should not move).
I am using OOPS ALV grid control.
thanks!
SenthilHi,
TO fix a column, in the filedcatalogfor the particular column which u want to fix give as
DATA: fcat LIKE LVC_S_FCAT.
fcat-fieldname = 'MATNR'.
fcat-<b>FIX_COLUMN = 'X'.</b>
Hope this helps. -
Not able to color different rows with different colors in a column of table
Hi,
I am trying to to display different rows with different colors in a column of the table based on some decode condition.
I have gone through the following threads :
Can we colour the rows in the column of a table
Changing Color of a value in a column
This is what i have done :
1.Added the following code to custom.xss(changed the name to Custom.xss as suggested in one of the above threads) --- in path ---- jdev\myhtml\OA_HTML\cabo\styles
<style selector=".1">
<includeStyle name="DefaultFontFamily"/>
<property name="font-size">11pt</property>
<property name="font-weight">Bolder</property>
<property name="color">#008000</property>
<property name="text-indent">3px</property>
</style>
<style selector=".2">
<includeStyle name="DefaultFontFamily"/>
<property name="font-size">11pt</property>
<property name="font-weight">Bolder</property>
<property name="color">#FFFF00</property>
<property name="text-indent">3px</property>
</style>
2. Sql query of the VO is :
select comments,role ,decode(role,'REQUESTER','1','2') Colorattr from xxat_sars_action_history where request_id = :1 and event_name = :2 and action_code <> 'PENDING'
order by sequence_num desc
3. Coded the following in the process request of the controller:
OATableBean table = (OATableBean)webBean.findIndexedChildRecursive("CommentsTB");
OAMessageStyledTextBean roleBN = (OAMessageStyledTextBean)webBean.findIndexedChildRecursive("role");
OADataBoundValueViewObject cssjob = new OADataBoundValueViewObject(roleBN,"Colorattr");
roleBN.setAttributeValue(oracle.cabo.ui.UIConstants.STYLE_CLASS_ATTR, cssjob);
where 1 and 2 form the colors ( i have even tried with 'Red' and 'Yellow'...as it was not working replaced with 1 and 2)
4.The query returns data fine with corresponding 1 and 2 values.
But different colors are not getting reflecting on to the UI.
I am testing this on my local jdev.
Please do let me know if i am missing something.
Thanks ,
Sushma.Any Clues please.....
Thanks,
Sushma. -
How can I fill a table of objects from cursor with select * bulk collect???
Hi All, I have a TYPE as OBJECT
create or replace type dept2_o as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
I can fill a table of objects from cursor with out select * bulk collect...., row by row
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
i integer;
begin
i:=0;
dept_o_tab.extend(20);
for rec in (select * from dept) loop
i:=i+1;
dept_o_tab(i):=dept2_o(
deptno => rec.deptno,
dname => rec.dname,
loc =>rec.loc
end loop;
for k IN 1..i loop
dbms_output.put_line(dept_o_tab(k).deptno||' '||dept_o_tab(k).dname||' '||dept_o_tab(k).loc);
end loop;
end;
RESULT
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
But I can't fill a table of objects from cursor with select * bulk collect construction ...
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
begin
dept_o_tab.extend(20);
select * bulk collect into dept_o_tab from dept;
end;
RESULT
ORA-06550: line 6, column 39;
PL/SQL: ORA-00947: not enough values ....
How can I fill a table of objects from cursor with select * bulk collect???create or replace type dept_ot as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
create table dept
(deptno number
,dname varchar2(14)
,loc varchar2(13)
insert into dept values (10, 'x', 'xx');
insert into dept values (20, 'y', 'yy');
insert into dept values (30, 'z', 'zz');
select dept_ot (deptno, dname, loc)
from dept
create type dept_nt is table of dept_ot
declare
l_depts dept_nt;
begin
select dept_ot (deptno, dname, loc)
bulk collect
into l_depts
from dept
for i in l_depts.first .. l_depts.last
loop
dbms_output.put_line (l_depts(i).deptno);
dbms_output.put_line (l_depts(i).dname);
dbms_output.put_line (l_depts(i).loc);
end loop;
end;
/ -
I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred
Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year
Hi Arun ,
Can you explain little bit more ??
what is account doc no?
what are the transactions should be displayed in your output??
-Rajesh N -
Unable to use two af:tables with differing coloring (skins)?
Im trying to configure the Siebel Self-Services application and customize the skinning. I have some problems though, because i need to show two af:tables on the same page, but with different coloring. One with black background and white text (both header and body) and one with white background and black text. I have tried to use styleClass:es, but the css parameters set for the af table are overriding the ones set in the stylesheets.
Anyone having an idea how to overcome this?
Thanks
/Jon-ErikHi,
if the styleClass name is table1 then the skin selector would be something like
.table1 af|table
or .afTable.af|table
I don't see how this can be overriden. If you assumption is that the style class reference must be to a CSS definition on the page then this indeed does not work. The styleClass name is kind of a named identifier for the component to skin and is used to further qualify the component to skin
Frank
Maybe you are looking for
-
Messed with multiple Domains... Big Problems
I have posted on this topic because I was experiencing very slow save times and publishing times. I had 20+ sites created in iWeb, many of which have large photo galleries. Wanting to solve this problem, I tried a couple of techniques to start with a
-
Pages Template not opening in a different user's application.
I have Mac Pages 5.2, as does my client. I have designed a template for him, but when I send the .template file to him, he gets an error that says it cannot be opened. No error code. I have done the following things to fix this: Removed any possible
-
How do i create a closing which shows on every outgoing email automatically, please ?
procedural question: how do i create a closing line which automatically appears on every outgoing email? thanx!
-
How to open a swf in a new window
I have a button in one swf that I'd like to open another swf in a new window. What's the easiest way to accomplish this task?
-
Want to set a photo as wallpaper on my treo 755p
I want to know how to set a photo on my treo as the wallpaper. Is it possible to get wallpaper for my treo 755p Post relates to: Treo 755p (Sprint)