Tables for CJ40 - change cost

Hi Gurus,
Which is the table for CJ40 --> actuivity input?
In this field we enter sender cost Ctr and Sender Act.Typ. Is there any table for same for PS?
thanks in advance.
NArender.

In SE16, PROJ, only project header details are provided.
In CJ40, we plan cost for each and individual WBS element. For a particular WBS element, if I plan cost with "activity input", system pops up following columns: Sender cost center, Sender activity type, and quantity. Quantity will be valuated with KP27 entries.
So my question is: in which table this data will be saved (WBS element --> Sender cost center --> sender activity type) ?
Regards,
Narender.

Similar Messages

  • Tables for PIR change documents

    Dear Experts ,
    I need to know the tables for PIR change documents , as shown in t code ME14.
    Can anyone please let me know the same ?
    Regards
    Anis

    Hi,
    Check below tables
    CDHDR- Change document Header
    CDPOS- Change socument Item
    SAM

  • Tables for PO changes and message output

    Hi Experts
    I wish to capture the changes in PO in the respective change out put. For this purpose, i need to fetch the relevant infmrmation applicable for the change output.
    Please let me know the appropriate tables for:
    -PO changes -item and header
    -PO message output
    Warm regards
    ramSiva

    Hi,
    Please check the following link :
    [Re: PO not showing Header Changes Log]
    Hope it helps,
    Best regards
    Amit Bakshi

  • Table for total actual cost and total actual revenue.

    Hi Gurus,
    Can anybody pls tell me what is the table for total acutal cost and total actual revenue for a service order.
    Thanks in advance.
    Regards
    Satish

    Check COSP

  • Table for Delivery changed data

    Dear Gurus
    There is a requirement to create a z report based on delivery details. As according to the business process, the delivery weight is changed by z activities somedays after creation of delivery. Is there any table from which i can get the previous (old) value of weight which is now replaced by new weight value. (As this can be seen in delivery change data details, it shows the previous weight value and new weight value but i cant find the table for it)
    Thnx in advance
    Deepak Mehmi

    Hi
    Since Lakshmipati has already answered the question just to add on in CDHDR with VL02N you can find the object class as LIEFERUNG for any change in net weight. You can query in CDPOS with object class as LIEFERUNG as Object class and Object Id as the delivery number (with preceeding zeros-to make it 10 digits). The FNAME would be BTGEW for gross weight and NTGEW would be for net weight. The VALUE_NEW would give the new value and VALUE_OLD would give the old value.
    Thanks
    Indranil

  • Table for "Budget planning : Cost Center"

    Hi Gurus,
    can anyone pls tell me table for "Budget : Cost Centre" . We create budget with respect to cost center in KPZ2/KPZ3 but i am unable to find out in which this data can be found.
    Pls tell me the table to retrieve the data.
    Regards

    You can do it yourself.
    goto transaction St05. activate the trace. then execute the transaction. after execution goto st05. click deactivate trace.
    then click display trace...hit enter button. a list will be displayed. goto menu bar choose first menu then choose option "Summarice sql statements"...a list will be displayed from which you can know what all tables were affected by the transaction.

  • Tables for  BUDGET & ACTUAL - COST CENTER

    Hi
    I want to know what are the table in which the actual and the budget for the COST CENTER are stored....
    Regards
    SAP4ME

    Hi Eli,
    Thnx for the reply.i have already checked those mentioned by u.
    My req is  that i want to pull the DATA for developing a report of ACTUAL and BUDGET for a particular cost center o range of cost cost centersfor a range of period.
    But in the table mentioned by,how can i will come to know,to which cost center ,what is budgeted and the actual .
    Please give some details.
    Regards
    SAP4ME

  • Joining vbak to cdhdr table for document changes

    Hi Expert
    I am hanging for a week in this project please need some advice
    I want to join vbak table with cdhdr and select
    vbak.vkbur (plant) and want to show that vkbur in the internal table of it_cdhdr
    so as to select only those plant belong to vkbur so how can I join base on the below coding................
    REPORT ZCHGDOC
    NO STANDARD PAGE HEADING LINE-SIZE 120.
    WRITE: sy-title, 40 'Page', sy-pagno.
    ULINE.
    TABLES: CDHDR,
             CDPOS,
             t001w,
             "VKBUR,
             "VBELN,
             VBAK,
             VBAP.
    SELECTION-SCREEN BEGIN OF BLOCK DOCUMENT WITH FRAME TITLE TEXT-701.
    SELECTION-SCREEN END OF BLOCK DOCUMENT.
    SELECT-OPTIONS:
                     V1 FOR VBAK-VKBUR,
                     S_WERKS for T001W-werks,
                     objectid for  cdhdr-objectid,
                     udate for cdhdr-udate.
    PARAMETER: USERNAME LIKE CDHDR-USERNAME.
    DATA: BEGIN OF IT_VBAP OCCURS 0,
             OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
             OBJECTID LIKE CDHDR-OBJECTID,
             VBELN LIKE VBAP-VBELN,
              END OF IT_VBAP.
    DATA: BEGIN OF IT_CDHDR OCCURS 0,
             OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
             OBJECTID LIKE CDHDR-OBJECTID,
             CHANGENR LIKE CDHDR-CHANGENR,
             USERNAME LIKE CDHDR-USERNAME,
             UDATE LIKE CDHDR-UDATE,
             UTIME LIKE CDHDR-UTIME,
             FNAME LIKE CDPOS-FNAME,
             TABNAME LIKE CDPOS-TABNAME,
             TABKEY LIKE CDPOS-TABKEY,
             VALUE_NEW LIKE CDPOS-VALUE_NEW,
             VALUE_OLD LIKE CDPOS-VALUE_OLD,
    END OF IT_CDHDR.
    DATA: WA LIKE LINE OF IT_CDHDR.
    DATA: WA LIKE LINE OF IT_CDPOS.
    DATA: BEGIN OF IT_CDPOS OCCURS 0,
             OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
             OBJECTID LIKE CDHDR-OBJECTID,
             CHANGENR LIKE CDHDR-CHANGENR,
             TABNAME LIKE CDPOS-TABNAME,
             TABKEY LIKE CDPOS-TABKEY,
             FNAME LIKE CDPOS-FNAME,
             VALUE_NEW LIKE CDPOS-VALUE_NEW,
             VALUE_OLD LIKE CDPOS-VALUE_OLD,
    END OF IT_CDPOS.
    Move-corresponding it_cdhdr to wa.
    Move-corresponding it_cdpos to wa.
    SELECT OBJECTCLAS
            OBJECTID
            CHANGENR
            USERNAME
            UDATE
            UTIME FROM CDHDR
            INTO CORRESPONDING FIELDS OF TABLE IT_CDHDR
    WHERE OBJECTCLAS = 'VERKBELEG' or
          objectclas = 'BETRIEB'
          ORDER BY UDATE.
    WHERE OBJECTCLAS = 'VERKBELEG'
    OR OBJECTCLAS = 'BETRIEB' ORDER BY UDATE.
    Filter data based upon Plant selection criteria.
    IF NOT S_WERKS[] IS INITIAL.
    DELETE IT_CDHDR WHERE NOT OBJECTID IN S_WERKS.
    ENDIF.
    IF IT_CDHDR[] IS NOT INITIAL.
       SELECT OBJECTCLAS
              OBJECTID
              CHANGENR
              VALUE_NEW
              VALUE_OLD
              FNAME
              TABNAME
              TABKEY
              FROM CDPOS
              INTO CORRESPONDING FIELDS OF TABLE IT_CDPOS
              FOR ALL ENTRIES IN IT_CDHDR
              WHERE
              OBJECTCLAS = IT_CDHDR-OBJECTCLAS
              AND OBJECTID = IT_CDHDR-OBJECTID
              AND CHANGENR = IT_CDHDR-CHANGENR.
              "or tabname = 'VBAP'.
       SORT IT_CDPOS BY OBJECTCLAS OBJECTID CHANGENR.
    ENDIF.
    Add tables CDPOS DATA TO CDHDR.
    DATA: INDEX TYPE i.
    LOOP AT IT_CDHDR.
       INDEX = SY-TABIX.
       READ TABLE IT_CDPOS WITH KEY OBJECTCLAS = IT_CDHDR-OBJECTCLAS
       OBJECTID = IT_CDHDR-OBJECTID
       CHANGENR = IT_CDHDR-CHANGENR BINARY SEARCH.
       IF SY-SUBRC = 0.
         IT_CDHDR-VALUE_NEW = IT_CDPOS-VALUE_NEW.
         IT_CDHDR-VALUE_OLD = IT_CDPOS-VALUE_OLD.
         MODIFY IT_CDHDR INDEX index TRANSPORTING value_new value_old.
       ENDIF.
       WRITE:/ SY-DATUM,SY-UZEIT,
              50 'DOCUMENT CHANGE REPORT',
             80 'Page', SY-PAGNO,
    "  WRITE: / SY-REPID
              50 'DETAIL REPORT BY PLANT '.
       SKIP.
       ULINE.
    *& T O P - O F - P A G E *
    WRITE:/ 'UDATE:' ,SY-DATUM.
    FORMAT COLOR 4 INTENSIFIED on.
    Write: /35                           ' DOCUMENT CHANGES REPORT '.
       WRITE: /5 'DOCUMENT-NO'.
    20 'TABNAME', 30 'TEXT_CASE', 50 'FNAME'.
       WRITE: /5 'DATE',  20 'FNAME', 45 'CHANGE-NO',65 'OLD-VALUE',80 'NEW-VALUE',95 'USER-NAME'.
       ULINE.
       LOOP AT IT_CDHDR INTO WA.
       on change of wa-objectid.
       Write: / wa-objectid UNDER'DOCUMENT-NO' ."color col_key.
       ENDON.
    ULINE.
         " CDPOS-tabname UNDER'TABNAME', CDPOS-TEXT_CASE UNDER'TEXT_CASE',CDPOS-fname UNDER'FNAME'. "color col_key ,
         write: / wa-udate dd/mm/yyyy under'DATE' NO-GAP,wa-fname under'FNAME' NO-GAP,wa-changenr under 'CHANGE-NO',
         wa-value_old under'OLD-VALUE' LEFT-JUSTIFIED NO-GAP,
         wa-value_new under'NEW-VALUE' LEFT-JUSTIFIED NO-GAP ,wa-username under'USER-NAME' NO-GAP.
    ENDON.
    Move-corresponding it_cdhdr to wa.
    *Write: / wa-objectid UNDER'DOCUMENT-NO' "color col_key.
    *" CDPOS-tabname UNDER'TABNAME', CDPOS-TEXT_CASE UNDER'TEXT_CASE',CDPOS-fname UNDER'FNAME'. "color col_key ,
    *write: / wa-udate dd/mm/yyyy under'DATE' NO-GAP,wa-utime under'TIME' NO-GAP,wa-changenr under 'CHANGE-NO',
    ltrim(wa-value_old) under'OLD-VALUE' NO-GAP,
    *wa-value_new under'NEW-VALUE' NO-GAP ,wa-username under'USER-NAME' NO-GAP.
       ENDLOOP.
    ENDLOOP.

    Hai everybody.
    I am new to this forum. i got a job in abap recently. The below is my requirement.I want solution for this one. Anybody plz help me.
    The change logs were captured in DBTABLOG for table ZWPRFRUND (in transaction ZWPG).
    The only report which is currently used to get the change logs is RSVTPROT
    Now my requirement is,
    we need to display the change logs in the form of ALV.
    We should divert the changes to CDHDR table instead of DBTABLOG, then we can use the RSSCD100 to display change logs.
    The Important items for the change LOG needed in case of changes to table in “ZWPG” are,DATE ,TIME,USER,FIRST NAME,FILED NAME,OLD VALUE,NEW VALUE
    The above fields need to be displayed in the grid. In the above list “FIELD NAME” denotes any field of the table in the transaction in “ZWPG”
    Thanks & Regards,
    Sujatha.T.

  • Table for Sales order Cost Est?

    Cost estimate data for sales orders used to be kept in KEKO and KEPH -
    Now that we've upgrade to 5.0 - there are only product cost estimates.
    Anybody know the tables for sales orders?
    thanks

    Dear Althea,
    please check with this tables.
    VBAG                           Sales Document: Release Data by Schedule Line in Sch.Agrmt.
    VBAK                           Sales Document: Header Data                               
    VBAP                           Sales Document: Item Data                                 
    VBBE                           Sales Requirements: Individual Records                    
    VBBS                           Sales Requirement Totals Record                           
    VBDATA                         Update data      
    Regards
    Mangal.

  • Name of the table for Standard Output/Cost maintained in in the IO

    Dear All,
    We go to KO03, enter the order no, display the order. Go to extras, Cost analysis. There are two columns. Total target cost and total actual cost. I need to find out the name of the table where the target cost/standard output is stored.
    Thanks in advance,
    Thanks,
    Satya

    Hi,
    The tables are :
    COSP
    COSS
    COSL
    COSB
    Regards,
    Eli

  • Table for po changes

    Hi,
       The changes in po item level and po changes at header level which table is maintained
          Thanks and Regards
            Anil

    Hi
    CDHDR - Change document header
    CDPOS - Change document items in addition to that following tables are used for Purchasing.
    EBAN - Purchase requisition: items
    EBKN - Purchase Requisition: account assignment 
    STXH - SAPScript Text Header
    STXL - SAPScript Text Lines
    EKKO - Purchasing document header 
    EKPO - Purchasing Document: Item
    EKET - Purchasing Document: Delivery Schedules
    MDBS - Material View of Order Item/Schedule Line (good to find open PO's)
    EKKN - Account assignment in purchasing document 
    EORD - Purchasing Source List
    EIPA - Order price history record 
    EKAB - Release documentation 
    EKBE - Purchasing document history 
    EKBZ - Purchasing document history: delivery costs 
    EKPB - "Material to be provided" item in purchasing document 
    ESKL - Account assignment specification for service line 
    ESKN - Account assignment in service package 
    ESLH - Service package header data 
    ESLL - Lines in service package 
    ESSR - Service entry sheet header data 
    ESUC - External services management: Unplanned limits for contract item 
    ESUH - External services management: unplanned service limits header data 
    ESUP - External services management: unplanned limits for service packages 
    ESUS - External services management: Unplanned limits for service types
    EINA - Purchase Info Record: General
    EINE - Purchasing info record: purchasing organization data 
    KONP - Condition Item
    KONH - Condition Header
    Thanks & Regards
    Anilkumar Dalai

  • Report or table  for the changed sales orders

    Hi Friends,
      Does anyone know of the standard report with which we can track all the sales orders where the changes have been made in particular date range?
      If not standard report then atleast the table or the structure where the value is stored.
    I know that we can track the orders one by one but I am looking for a list of orders.
    Thanks in advance.
    Regards
    Karan

    Hi,
    Try CDHDR for header and CDPOS for items.
    The only trick here is finding the object.
    Reward points if useful
    Regards,
    Amrish Purohit

  • Table for finding material cost in group currency

    Hi ,
    We are maintaing product cost on Cocode currency and group currency using CK11. We are not able to find the cost in group currecy in MEBW or KEPH.
    Kindly let me know the right table to look into.
    Thanks,
    Jatin

    Hi Jatin
    Did you mean you have cost component split in controlling area currency? if yes, then you will get for each costing calculation two records in table KEPH, the currency label is field LOSFX. The record with blank LOSFX is company code currency, the one with "X" is controlling area currency.
    Hope this helps.
    Junqi

  • Table for BOM changes

    Is there a report that I can run to find all BOM changes for a specific date? Is there a table that I can query that would hold this information?
    I would also like to perform the same search for recipies and material master changes.

    Hi
    YOu can use CS80.
    I think you must be aware about the BOM history maintenance which you select at the time of customization.
    After you select the indicator please go to the table MKAL and find out the BOM.
    It will show you all the changes made in a particular BOM
    also you can find the change records in tables CDHDR (Header records), CDPOS (Item records), CDATA (Details)
    Material master changes - MM04
    Recipe change report - check C260 and C261
    regards
    Srinivas

  • Table for "documents change" with statuses

    Hi,
    I need a table where all the status changes for a service order (ticket) are stored (with dates).
    I know of CDHDR table, but there are no entries for statuses?
    Any idea?
    Thank you,
    Borut

    Thanks!
    I think this table will do the job.
    Kind regards,
    Borut

Maybe you are looking for