Table for BOM changes

Is there a report that I can run to find all BOM changes for a specific date? Is there a table that I can query that would hold this information?
I would also like to perform the same search for recipies and material master changes.

Hi
YOu can use CS80.
I think you must be aware about the BOM history maintenance which you select at the time of customization.
After you select the indicator please go to the table MKAL and find out the BOM.
It will show you all the changes made in a particular BOM
also you can find the change records in tables CDHDR (Header records), CDPOS (Item records), CDATA (Details)
Material master changes - MM04
Recipe change report - check C260 and C261
regards
Srinivas

Similar Messages

Customized report for BOM changes

Hi PP Gurus,
My client is not having ECM. he want to create one Z report for BOM changes. I checked tables MAST, STKO, STPO, CDPOS and CDHDR. In CDPOS I can see replaced component and replced quantity. But if I deleted any component or inserted any new component I can not see this in any table. Please suggest me how can I track such changes without ECM.
Jayesh Narvankar
SAP PP

Dear ,
You can try to develope a report with the help of you ABAPer with following FM /BAPI :
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_BOM_ITEM_MAINTAIN
CSAP_MAT_BOM_CLOSE
Refer this experts theards on this issues : Deletion of BOM item using BAPI/FM
If you need to go ahead with ECM , you refer our earlier posting in the same issue :
Changes in Production Orders
Regards
JH

Setting up workflow for bom change LO-ECH

Hi all,
I am trying to set up the workflow for BOM change. I have followed the Preparation step for the setup and was stuck at the step 'Define the Organizational Plan for the Change Department (LO-ECH)', step number 6.
<a href="http://">http://help.sap.com/saphelp_46c/helpdata/en/f1/499a34272a5f2ee10000009b38f83b/frameset.htm</a>
5. Select the object type SAP Organizational Object, and click .
The Add SAP Organizational Object screen appears.
6. In the field SAP org. object type, enter one of the following organizational object types:
TCC11
Responsible for changes of this change type (master record)
TCC13
Responsible for object changes of this change type
When I click on either TCC11 or TCC13, it give me the below error message
"Method CREATE not defined for object type Person responsible for changes of this type.
Message no. 5W003"
I have debugged the program and seems like it error out because there is no entries for 'CREATE' in the table SWOTDV for objecttype = 'TCC13' or 'TCC11'
May I know what am I missing here?
Regards
Khong Kiam

But I find if I have as original media - one jpeg still, one 480 x 720 video clip
480x720? Do you mean 720x420? And what CODEC? DV? Some odd whackball one like MPEG-4? Look at COMPRESSOR in the BROWSER in FCP.
Stills you have to render...
and are employing opacity, a filter like Blink,some color correction, etc. That I get minutes to render a 30 second clip.
That is still adding a filter, and opacity..and color correction. That will require rendering.
If you find that you drop a clip onto the timeline, and you instantly need to render, then something is wrong with your settings. You shouldn't have to render clips in the timeline. Not if they are captured or imported PROPERLY, meaning that they are codecs that FCP edits with.
If you want to just grab random clips or use random codecs and throw them all into an application and begin editing, then you should look at another editing application, like Vegas or Adobe Premiere CS5.
Shane

Tables for PIR change documents

Dear Experts ,
I need to know the tables for PIR change documents , as shown in t code ME14.
Can anyone please let me know the same ?
Regards
Anis

Hi,
Check below tables
CDHDR- Change document Header
CDPOS- Change socument Item
SAM

Tables for PO changes and message output

Hi Experts
I wish to capture the changes in PO in the respective change out put. For this purpose, i need to fetch the relevant infmrmation applicable for the change output.
Please let me know the appropriate tables for:
-PO changes -item and header
-PO message output
Warm regards
ramSiva

Hi,
Please check the following link :
[Re: PO not showing Header Changes Log]
Hope it helps,
Best regards
Amit Bakshi

Tables for BOM Header and Components

Dear Friends,
Please let me know which tables provide a link between the header Material and corresponding Component Materials of a BOM?
I have seen STKO and STPO but couldn't find such a link in them. STPO gives the component material but I couldn't get any link to Header material.
Regards,
Alok.

Hello Alok,
Table for BOM header - STKO
Table for BOM item - STPO
Table for material to BOM link - MAST
Check if MARC table has a material in it and the same material is available in MAST also, it means that BOM has been created for that material..
If Material is available in MARC and not available in MAST, it means BOM has not been created for that material.
Reward Points, if useful.
Regards,
Nitin.

Need Table for BOM selection with qunatity

Hi experts,
I'm unable to get the table for Alternate BOM, BOM component and Component qty in one table. Plz help me if any body having idea about this inform me.
Thanking you,
Narendra

Hi,
Please find below tables for BOM
                      STKO                    BOM - header
     STPO                    BOM - item
     STAS                    BOMs - Item Selection
     STPN                    BOMs - follow-up control
     STPU                    BOM - sub-item
     STZU                    Permanent BOM data
     PLMZ                    Allocation of BOM - items to operations
     MAST                    Material to BOM link
     KDST                    Sales order to BOM link
I think use MAST,STKO ,STPO for your use
Regards
SANIL

Table for Delivery changed data

Dear Gurus
There is a requirement to create a z report based on delivery details. As according to the business process, the delivery weight is changed by z activities somedays after creation of delivery. Is there any table from which i can get the previous (old) value of weight which is now replaced by new weight value. (As this can be seen in delivery change data details, it shows the previous weight value and new weight value but i cant find the table for it)
Thnx in advance
Deepak Mehmi

Hi
Since Lakshmipati has already answered the question just to add on in CDHDR with VL02N you can find the object class as LIEFERUNG for any change in net weight. You can query in CDPOS with object class as LIEFERUNG as Object class and Object Id as the delivery number (with preceeding zeros-to make it 10 digits). The FNAME would be BTGEW for gross weight and NTGEW would be for net weight. The VALUE_NEW would give the new value and VALUE_OLD would give the old value.
Thanks
Indranil

What are the main tables for BOM (Bill of Materials)

Hi Gurus,
I need to know the tables involved in BOM (Bill of Materials) for Oracle EBS.
Can anyone point out the list of related tables?
Thanks

Hi Sudipta,
Following are the BOM main tables.
bom_bill_of_materials
bom_inventory_components
bom_reference_designators
bom_substitute_components
mtl_item_revisions
bom_operational_routings
bom_operation_sequences
bom_operation_resources
BOM_BILL_OF_MTLS_INTERFACE
BOM_INVENTORY_COMPS_INTERFACE
BOM_REF_DESGS_INTERFACE
BOM_SUB_COMPS_INTERFACE
MTL_ITEM_REVISIONS_INTERFACE
BOM_OP_ROUTINGS_INTERFACE
BOM_OP_SEQUENCES_INTERFACE
BOM_OP_RESOURCES_INTERFACE
MTL_RTG_ITEM_REVS_INTERFACE
=======================
Following are all tables of BOM.
BOM_ALTERNATE_DESIGNATORS
BOM_ALTERNATE_DESIGNATORS_TL
BOM_ATO_CONFIGS_TEMP
BOM_ATO_CONFIGURATIONS
BOM_BILLS_HEADER_TEMP
BOM_BILL_OF_MATERIALS
BOM_BILL_OF_MATERIALS_ARCHIVE
BOM_BILL_OF_MATERIALS_TEMP
BOM_BILL_OF_MTLS_INTERFACE
BOM_BILL_REVISIONS_B
BOM_BILL_REVISIONS_TL
BOM_CALENDARS
BOM_CALENDAR_DATES
BOM_CALENDAR_EXCEPTIONS
BOM_CALENDAR_SHIFTS
BOM_CAL_WEEK_START_DATES
BOM_CAL_YEAR_START_DATES
BOM_CMP_USR_ATTR_INTERFACE
BOM_COMPARISON_TEMP
BOM_COMPONENTS_B
BOM_COMPONENTS_EXT_B
BOM_COMPONENTS_EXT_TL
BOM_COMPONENT_COLUMNS
BOM_COMPONENT_OPERATIONS
BOM_COMPONENT_OPS_INTERFACE
BOM_COMPONENT_TYPES
BOM_COMP_OPTCLASS_TEMP
BOM_COMP_OPTIONS_TEMP
BOM_CONFIG_EXPLOSIONS
BOM_COPY_ORGANIZATION_LIST
BOM_COPY_STRUCTURE_ACTIONS
BOM_COPY_STRUCTURE_REQUEST
BOM_CTO_MLSUPPLY_MAIN_TEMP
BOM_CTO_MODEL_ORGS
BOM_CTO_ORDER_DEMAND
BOM_CTO_ORDER_LINES
BOM_CTO_ORDER_LINES_UPG
BOM_CTO_OSS_COMPONENTS
BOM_CTO_OSS_ORGS_LIST
BOM_CTO_SRC_ORGS
BOM_CTO_SRC_ORGS_B
BOM_DELETE_ENTITIES
BOM_DELETE_ERRORS
BOM_DELETE_GROUPS
BOM_DELETE_SQL_STATEMENTS
BOM_DELETE_SUB_ENTITIES
BOM_DEPARTMENTS
BOM_DEPARTMENT_CLASSES
BOM_DEPARTMENT_RESOURCES
BOM_DEPENDENT_DESC_ELEMENTS
BOM_DEPEND_DESC_ELEM_ARCHIVE
BOM_DEPT_RES_INSTANCES
BOM_EAM_DEPT_APPROVERS
BOM_EXCEPTION_SETS
BOM_EXCEPTION_SET_DATES
BOM_EXCLUSION_RULE_ARCHIVE
BOM_EXCLUSION_RULE_DEF
BOM_EXPLOSIONS
BOM_EXPLOSIONS_ALL
BOM_EXPLOSION_TEMP
BOM_FORM_QUERY
BOM_IMPLOSION_TEMP
BOM_INTERFACE_DELETE_GROUPS
BOM_INVENTORY_COMPONENTS
BOM_INVENTORY_COMPONENTS_TEMP
BOM_INVENTORY_COMPS_ARCHIVE
BOM_INVENTORY_COMPS_INTERFACE
BOM_INV_COMPONENTS_TEMP
BOM_ITEM_ATTACH_CATEGORY_ASSOC
BOM_ITEM_BACKFLUSH_SUBINV
BOM_LISTS
BOM_LOW_LEVEL_CODES
BOM_MIXED_MODEL_MAP_CELLS
BOM_MIXED_MODEL_MAP_HEADER
BOM_MIXED_MODEL_MAP_PROCESSES
BOM_MIXED_MODEL_MAP_RES
BOM_OPERATIONAL_ROUTINGS
BOM_OPERATION_NETWORKS
BOM_OPERATION_RESOURCES
BOM_OPERATION_RESOURCES_EFC
BOM_OPERATION_SEQUENCES
BOM_OPERATION_SEQUENCES_TEMP
BOM_OPERATION_SKILLS
BOM_OP_NETWORKS_INTERFACE
BOM_OP_RESOURCES_ARCHIVE
BOM_OP_RESOURCES_INTERFACE
BOM_OP_ROUTINGS_ARCHIVE
BOM_OP_ROUTINGS_INTERFACE
BOM_OP_SEQUENCES_ARCHIVE
BOM_OP_SEQUENCES_INTERFACE
BOM_PARAMETERS
BOM_PERIOD_START_DATES
BOM_REFERENCE_DESGS_ARCHIVE
BOM_REFERENCE_DESIGNATORS
BOM_REF_DESGS_INTERFACE
BOM_RESOURCES
BOM_RESOURCES_EFC
BOM_RESOURCE_CHANGES
BOM_RESOURCE_DOWNCODES
BOM_RESOURCE_EMPLOYEES
BOM_RESOURCE_EQUIPMENTS
BOM_RESOURCE_FLEX_FENCES
BOM_RESOURCE_SETUPS
BOM_RESOURCE_SHIFTS
BOM_RES_INSTANCE_CHANGES
BOM_RTGHEADER_TEMP
BOM_RTG_ITEM_REVISIONS_ARCHIVE
BOM_RTG_NETWORK_TEMP
BOM_RTG_OPERATION_TEMP
BOM_RTG_OPER_RES_TEMP
BOM_RTG_RESOURCE_TEMP
BOM_RTG_SUB_RESOURCE_TEMP
BOM_RULES_B
BOM_SETUP_TRANSITIONS
BOM_SETUP_TYPES
BOM_SHIFT_DATES
BOM_SHIFT_EXCEPTIONS
BOM_SHIFT_TIMES
BOM_SMALL_EXPL_TEMP
BOM_SMALL_IMPL_TEMP
BOM_STANDARD_OPERATIONS
BOM_STD_OP_BONUS_CODES
BOM_STD_OP_RESOURCES
BOM_STD_OP_RESP_EXCLUSIONS
BOM_STD_OP_SCRAP_CODES
BOM_STD_SUB_OP_RESOURCES
BOM_STRUCTURES_B
BOM_STRUCTURES_EXT_B
BOM_STRUCTURES_EXT_TL
BOM_STRUCTURE_EXT_B
BOM_STRUCTURE_REVISIONS_B
BOM_STRUCTURE_REVISIONS_TL
BOM_STRUCTURE_TYPES_B
BOM_STRUCTURE_TYPES_TL
BOM_SUBSTITUTE_COMPONENTS
BOM_SUBSTITUTE_COMPS_ARCHIVE
BOM_SUB_COMPS_INTERFACE
BOM_SUB_OPERATION_RESOURCES
BOM_SUB_OPERATION_RESOURCE_EFC
BOM_SUB_OP_RESOURCES_INTERFACE
BOM_WORKDAY_PATTERNS
HTH
Sanjay

Joining vbak to cdhdr table for document changes

Hi Expert
I am hanging for a week in this project please need some advice
I want to join vbak table with cdhdr and select
vbak.vkbur (plant) and want to show that vkbur in the internal table of it_cdhdr
so as to select only those plant belong to vkbur so how can I join base on the below coding................
REPORT ZCHGDOC
NO STANDARD PAGE HEADING LINE-SIZE 120.
WRITE: sy-title, 40 'Page', sy-pagno.
ULINE.
TABLES: CDHDR,
         CDPOS,
         t001w,
         "VKBUR,
         "VBELN,
         VBAK,
         VBAP.
SELECTION-SCREEN BEGIN OF BLOCK DOCUMENT WITH FRAME TITLE TEXT-701.
SELECTION-SCREEN END OF BLOCK DOCUMENT.
SELECT-OPTIONS:
                 V1 FOR VBAK-VKBUR,
                 S_WERKS for T001W-werks,
                 objectid for cdhdr-objectid,
                 udate for cdhdr-udate.
PARAMETER: USERNAME LIKE CDHDR-USERNAME.
DATA: BEGIN OF IT_VBAP OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         VBELN LIKE VBAP-VBELN,
          END OF IT_VBAP.
DATA: BEGIN OF IT_CDHDR OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         CHANGENR LIKE CDHDR-CHANGENR,
         USERNAME LIKE CDHDR-USERNAME,
         UDATE LIKE CDHDR-UDATE,
         UTIME LIKE CDHDR-UTIME,
         FNAME LIKE CDPOS-FNAME,
         TABNAME LIKE CDPOS-TABNAME,
         TABKEY LIKE CDPOS-TABKEY,
         VALUE_NEW LIKE CDPOS-VALUE_NEW,
         VALUE_OLD LIKE CDPOS-VALUE_OLD,
END OF IT_CDHDR.
DATA: WA LIKE LINE OF IT_CDHDR.
DATA: WA LIKE LINE OF IT_CDPOS.
DATA: BEGIN OF IT_CDPOS OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         CHANGENR LIKE CDHDR-CHANGENR,
         TABNAME LIKE CDPOS-TABNAME,
         TABKEY LIKE CDPOS-TABKEY,
         FNAME LIKE CDPOS-FNAME,
         VALUE_NEW LIKE CDPOS-VALUE_NEW,
         VALUE_OLD LIKE CDPOS-VALUE_OLD,
END OF IT_CDPOS.
Move-corresponding it_cdhdr to wa.
Move-corresponding it_cdpos to wa.
SELECT OBJECTCLAS
        OBJECTID
        CHANGENR
        USERNAME
        UDATE
        UTIME FROM CDHDR
        INTO CORRESPONDING FIELDS OF TABLE IT_CDHDR
WHERE OBJECTCLAS = 'VERKBELEG' or
      objectclas = 'BETRIEB'
      ORDER BY UDATE.
WHERE OBJECTCLAS = 'VERKBELEG'
OR OBJECTCLAS = 'BETRIEB' ORDER BY UDATE.
Filter data based upon Plant selection criteria.
IF NOT S_WERKS[] IS INITIAL.
DELETE IT_CDHDR WHERE NOT OBJECTID IN S_WERKS.
ENDIF.
IF IT_CDHDR[] IS NOT INITIAL.
   SELECT OBJECTCLAS
          OBJECTID
          CHANGENR
          VALUE_NEW
          VALUE_OLD
          FNAME
          TABNAME
          TABKEY
          FROM CDPOS
          INTO CORRESPONDING FIELDS OF TABLE IT_CDPOS
          FOR ALL ENTRIES IN IT_CDHDR
          WHERE
          OBJECTCLAS = IT_CDHDR-OBJECTCLAS
          AND OBJECTID = IT_CDHDR-OBJECTID
          AND CHANGENR = IT_CDHDR-CHANGENR.
          "or tabname = 'VBAP'.
   SORT IT_CDPOS BY OBJECTCLAS OBJECTID CHANGENR.
ENDIF.
Add tables CDPOS DATA TO CDHDR.
DATA: INDEX TYPE i.
LOOP AT IT_CDHDR.
   INDEX = SY-TABIX.
   READ TABLE IT_CDPOS WITH KEY OBJECTCLAS = IT_CDHDR-OBJECTCLAS
   OBJECTID = IT_CDHDR-OBJECTID
   CHANGENR = IT_CDHDR-CHANGENR BINARY SEARCH.
   IF SY-SUBRC = 0.
     IT_CDHDR-VALUE_NEW = IT_CDPOS-VALUE_NEW.
     IT_CDHDR-VALUE_OLD = IT_CDPOS-VALUE_OLD.
     MODIFY IT_CDHDR INDEX index TRANSPORTING value_new value_old.
   ENDIF.
   WRITE:/ SY-DATUM,SY-UZEIT,
          50 'DOCUMENT CHANGE REPORT',
         80 'Page', SY-PAGNO,
" WRITE: / SY-REPID
          50 'DETAIL REPORT BY PLANT '.
   SKIP.
   ULINE.
*& T O P - O F - P A G E *
WRITE:/ 'UDATE:' ,SY-DATUM.
FORMAT COLOR 4 INTENSIFIED on.
Write: /35                           ' DOCUMENT CHANGES REPORT '.
   WRITE: /5 'DOCUMENT-NO'.
20 'TABNAME', 30 'TEXT_CASE', 50 'FNAME'.
   WRITE: /5 'DATE', 20 'FNAME', 45 'CHANGE-NO',65 'OLD-VALUE',80 'NEW-VALUE',95 'USER-NAME'.
   ULINE.
   LOOP AT IT_CDHDR INTO WA.
   on change of wa-objectid.
   Write: / wa-objectid UNDER'DOCUMENT-NO' ."color col_key.
   ENDON.
ULINE.
     " CDPOS-tabname UNDER'TABNAME', CDPOS-TEXT_CASE UNDER'TEXT_CASE',CDPOS-fname UNDER'FNAME'. "color col_key ,
     write: / wa-udate dd/mm/yyyy under'DATE' NO-GAP,wa-fname under'FNAME' NO-GAP,wa-changenr under 'CHANGE-NO',
     wa-value_old under'OLD-VALUE' LEFT-JUSTIFIED NO-GAP,
     wa-value_new under'NEW-VALUE' LEFT-JUSTIFIED NO-GAP ,wa-username under'USER-NAME' NO-GAP.
ENDON.
Move-corresponding it_cdhdr to wa.
*Write: / wa-objectid UNDER'DOCUMENT-NO' "color col_key.
*" CDPOS-tabname UNDER'TABNAME', CDPOS-TEXT_CASE UNDER'TEXT_CASE',CDPOS-fname UNDER'FNAME'. "color col_key ,
*write: / wa-udate dd/mm/yyyy under'DATE' NO-GAP,wa-utime under'TIME' NO-GAP,wa-changenr under 'CHANGE-NO',
ltrim(wa-value_old) under'OLD-VALUE' NO-GAP,
*wa-value_new under'NEW-VALUE' NO-GAP ,wa-username under'USER-NAME' NO-GAP.
   ENDLOOP.
ENDLOOP.

Hai everybody.
I am new to this forum. i got a job in abap recently. The below is my requirement.I want solution for this one. Anybody plz help me.
The change logs were captured in DBTABLOG for table ZWPRFRUND (in transaction ZWPG).
The only report which is currently used to get the change logs is RSVTPROT
Now my requirement is,
we need to display the change logs in the form of ALV.
We should divert the changes to CDHDR table instead of DBTABLOG, then we can use the RSSCD100 to display change logs.
The Important items for the change LOG needed in case of changes to table in ZWPG are,DATE ,TIME,USER,FIRST NAME,FILED NAME,OLD VALUE,NEW VALUE
The above fields need to be displayed in the grid. In the above list FIELD NAME denotes any field of the table in the transaction in ZWPG
Thanks & Regards,
Sujatha.T.

Function module required for BOM Changes

Dear SAP Guru
I need the function module which gives me the details of changes done in the BOM.
Scenario: Need to develop the report which gives only the details of BOM changed on the given date. The BOM level might vary.
Regards
Rahul

Dear
I think you should have ECM in place to have tracability for any changes carried out in BOM .
Refer earlier posting : Re: ECM ECR
If the ECM is in place , then you can see what changes has been done in CC02/03 Environmnet - > Reporting -> Bill of Material.
Otherwise please try the following Functinal Module : You can also try CEWB and CS80
1. CSAP_BOM_ITEM_MAINTAIN
2.CS_BOM_EXPL_MAT_V2
3.CHANGEDOCUMENT_READ and CDHDR
Refer : http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
Regards
JH

Agile PLMA: MDS mapping table for BOM table

Hi,
I'm looking for BOM equivalent table in mds schema.
Currently OBIEE 10g is installed.
It would be really helpful, if you could share the entire schema mappings (Agile to MDS schema).
Thanks,
Prem.

Any hints on this would be highly appreciated.
Regards,
Prem.

Table for bom

Dear Experts,
Pls can u tell me table for multilevel bom exposion where i can get the lower level material.
Regards,
Sunil Patil

Dear Mr.Sunil,
Use tables MAST,STKO,STPO,STAS.
STPO               BOM Item Details
STPU               BOM Sub Items (designators)
STKO         BOM Header Details
MAST              BOM Group to Material
STZU              BOM History Records
STAS              BOM Item Selection
STPF        BOM Explosion Structure
PLMZ     Allocation of bill of material items to operations
T codes are CS11 - Display BOM Level By Level
CS12 - Display Multilevel BOM
CS13 - Summarised BOM.
Regards
Mangal

Tables for CJ40 - change cost

Hi Gurus,
Which is the table for CJ40 --> actuivity input?
In this field we enter sender cost Ctr and Sender Act.Typ. Is there any table for same for PS?
thanks in advance.
NArender.

In SE16, PROJ, only project header details are provided.
In CJ40, we plan cost for each and individual WBS element. For a particular WBS element, if I plan cost with "activity input", system pops up following columns: Sender cost center, Sender activity type, and quantity. Quantity will be valuated with KP27 entries.
So my question is: in which table this data will be saved (WBS element --> Sender cost center --> sender activity type) ?
Regards,
Narender.

How to use BAPI_MATERIAL_BOM_GROUP_CREATE for BOM change?

Hi All-
I would like to know how to use the BAPI - BAPI_MATERIAL_BOM_GROUP_CREATE to change an existing BOM? I know other available function modules for changing BOMs, but I would appreciate if someone tell me how to use the above BAPI. I heard we can use this to change the BOM.
Points will surely be awarded....
THanks
M A
Edited by: Shakir on Jul 15, 2008 4:29 PM

hi,
data : TESTRUN LIKE BAPIFLAG,
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
   EXPORTING
     TESTRUN = TESTRUN
   TABLES
     ITEMASSIGNMENTS = ITEMASSIGNMENTS
     SUBITEMASSIGNMENTS = SUBITEMASSIGNMENTS
     TEXTS = TEXTS
     RETURN = RETURN
     MATERIALRELATIONS = MATERIALRELATIONS
     SUBITEMS = SUBITEMS
     ITEMS = ITEMS
     VARIANTS = VARIANTS
     BOMGROUP = BOMGROUP
   EXCEPTIONS
     OTHERS = 01.

Table for BOM changes

Similar Messages

Maybe you are looking for