Tables in PSA and Aggregates

Hi,
Wt are the Tables present in PSA and Aggregates???
Regards,
siv

Hi,
Goto RSA1 -> PSA -> Right click on the Infosource and select delete PSA data -> A new screen is shown where the technical name of the PSA is displayed. It should be /BIC/*******. Copy that and come out of the screen.
In SE16 click F4 and then Information System.In the Short Description field put in the name of the InfoSource within *, like 0MATERIAL_ATTR and click the check mark. You will get the /BIC/ table (PSA table) that you are looking for.
U can know the PSA table name by going to the PSA (RSA15) in AWB.
Choose the infosource ....beneath it u can find ur PSA name...its an extention of the uinfosource name.
You can see the different aggregate tables in Se16 by putting in the technical name of the aggregate, like 100178. You can look at the aggregate data in LISTCUBE using the same technical name
Select InfoCube -> Maintain Aggregates -> on right panel select or highlight the aggregate -> choose menu GOTO -> Aggregate Data. This will put u to the List Cube of the Technical Name of the Aggregate directly
Hareesh

Similar Messages

How can i delete data in psa and how can i partation psa?

hi friends,
can i delete data from psa and how can i partation psa?
Thanking u
suneel.

hi Suneel,
http://help.sap.com/saphelp_nw70/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
Using partitioning, you can separate the dataset of a PSA table into several smaller, physically independent, and redundancy-free units. This separation can mean improved performance when you update data from the PSA. In the <b>Implementation Guide with SAP NetWeaver > Business Intelligence > Connections to Other Systems > Maintain Control Parameters for Data Transfer</b> you define the number of data records needed to create a new partition. Only data records from a complete request are stored in a partition. The specified value is a threshold value.
transaction SPRO to go implementation guide
at database level
http://help.sap.com/saphelp_nw70/helpdata/en/33/dc2038aa3bcd23e10000009b38f8cf/frameset.htm
If you are using this database you can also partition PSA tables. You first have to activate this function using RSADMIN parameter DB4_PSA_PARTITIONING = 'X'. SAP Note 815186 includes more comprehensive information on this.
hope this helps.

Process Chain : Read PSA and Update Data Target in BI 7.0

Hello Experts,
In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
In the variant " Read PSA and Update Data Target". the selection Parameters were
PSA.Table : 0GLACCEXT_T011_HIER_BA1
Selection Object Type : same Infopackage in Varaint Execute Infopackage
the Error message was Variant doesnot contain a valid combination request/data target
I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
0GLACCEXT_T011_HIER_BA1
0GLACCEXT_T011_HIER_BA2
0GLACCEXT_T011_HIER_BA3
0GLACCEXT_T011_HIER_BA4
All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
I can't understand why there exists four PSA Tables?
I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
How shall I handle this issue?
Please carify me the issues as soon as possible.
thanks in advance
Regards
sailekha

Hello,
In the Variant Read PSA and Update Data Target I have to select the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table then only I can save and include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
I checked the PSA using the Transaction RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
Thanks & Regards

Any difference between distinct and aggregate function in sql query cost???

Hi,
I have executed many sql stmts patterns- such as:
a) using a single table
b) using two tables, using simple joins or outer joins
but i have not noticed any difference in sql stmts in cost and in execution plan....
Anyway, my colleague insists on that using aggregate function is less costly compared to
distinct....(something i have not confirmed, that's why i beleive that they are exactly the same...)
For the above reffered 1st sql pattern.. we could for example use
select distinct deptno
from emp
select count(*), deptno
from emp
group by deptno select distinct owner, object_type from all_objects
select count(*), owner, object_type from all_objects
group by owner, object_typeHave you found any difference between the two ever...????
Note: I use Ora DB 10g v2.
Thank you,
Sim

distinct and aggregate function are for different uses and may give same result but if u r using aggregate function to get distinct records, it will be expensive...
ex
select distinct deptno from scott.dept;
Statistics
0 recursive calls
0 db block gets
2 consistent gets
0 physical reads
0 redo size
584 bytes sent via SQL*Net to client
488 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
4 rows processed
select deptno from scott.emp group by deptno;
Statistics
307 recursive calls
0 db block gets
60 consistent gets
6 physical reads
0 redo size
576 bytes sent via SQL*Net to client
488 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
6 sorts (memory)
0 sorts (disk)
3 rows processed
Nimish Garg
Software Developer
*(Oracle & ASP.NET)*
Indiamart Intermesh Limited, Noida
To Get Free Oracle & ASP.NET Code Snippets
Follow: http://nimishgarg.blogspot.com

Need complex query with joins and AGGREGATE functions.

Hello Everyone ;
Good Morning to all ;
I have 3 tables with 2 lakhs record. I need to check query performance.. How CBO rewrites my query in materialized view ?
I want to make complex join with AGGREGATE FUNCTION.
my table details
SQL> select from tab;*
TNAME TABTYPE CLUSTERID
DEPT TABLE
PAYROLL TABLE
EMP TABLE
SQL> desc emp
Name
EID
ENAME
EDOB
EGENDER
EQUAL
EGRADUATION
EDESIGNATION
ELEVEL
EDOMAIN_ID
EMOB_NO
SQL> desc dept
Name
EID
DNAME
DMANAGER
DCONTACT_NO
DPROJ_NAME
SQL> desc payroll
Name
EID
PF_NO
SAL_ACC_NO
SALARY
BONUS
I want to make complex query with joins and AGGREGATE functions.
Dept names are : IT , ITES , Accounts , Mgmt , Hr
GRADUATIONS are : Engineering , Arts , Accounts , business_applications
I want to select records who are working in IT and ITES and graduation should be "Engineering"
salary > 20000 and < = 22800 and bonus > 1000 and <= 1999 with count for males and females Separately ;
Please help me to make a such complex query with joins ..
Thanks in advance ..
Edited by: 969352 on May 25, 2013 11:34 AM

969352 wrote:
why do you avoid providing requested & NEEDED details?I do NOT understand what do you expect ?
My Goal is :
1. When executing my own query i need to check expalin plan.please proceed to do so
http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_9010.htm#SQLRF01601
2. IF i enable query rewrite option .. i want to check explain plan ( how optimizer rewrites my query ) ? please proceed to do so
http://docs.oracle.com/cd/E11882_01/server.112/e16638/ex_plan.htm#PFGRF009
3. My only aim is QUERY PERFORMANCE with QUERY REWRITE clause in materialized view.It is an admirable goal.
Best Wishes on your quest for performance improvements.

Taking long time filling the setup tables for sales and shipment

Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .

Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth

Doesn't load from source system to PSA and DSO

Hi Gurus,
We have launched a Delta load from Source System (POSDM) to DSO. In the source system there are 5000000 rows but none was loaded into DSO or PSA. The delta load was ok, but any data was loaded.
If the delta load was lunch again, would be loaded those 5000000 rows. Or those 5000000 rows wouldn't be able to load again.
Any idea abut this issue? Any feedback will be really appreciated.
Thanks in advance.

Hi David,
Are you sure this 5 million records are delta records and should be pulled into BW as delta??
did you count the number of records in the underlying tables??
which data source you are using??
Delta loads are suppose to bring the new records or changed records since the last data load and not all the records.
Since the request is green as you said and still it shows 0 records then it is possible that nothing has changed since last delta.try to see the details of the data load... if it failed...may be thats the reason you are not able to see any records.
If you schedule the delta again it will bring the records changed or created after last delta.
If the delta was unsuccessfull then turn the QM status and overall status of request to red manually in the monitor of the request and delete it from PSA and all the targets in which its loaded and schedule the delta again and it should bring the delta.
Thanks
Ajeet
Thanks
Ajeet

Analytic function and aggregate function

What are analytic function and aggregate function. What is difference between them?

hi,
Analytic Functions :----------
Analytic functions compute an aggregate value based on a group of rows. They differ from aggregate functions in that they return multiple rows for each group. The group of rows is called a window and is defined by the analytic_clause. For each row, a sliding window of rows is defined. The window determines the range of rows used to perform the calculations for the current row. Window sizes can be based on either a physical number of rows or a logical interval such as time.
Analytic functions are the last set of operations performed in a query except for the final ORDER BY clause. All joins and all WHERE, GROUP BY, and HAVING clauses are completed before the analytic functions are processed. Therefore, analytic functions can appear only in the select list or ORDER BY clause.
Analytic functions are commonly used to compute cumulative, moving, centered, and reporting aggregates.
Aggregate Functions :----------
Aggregate functions return a single result row based on groups of rows, rather than on single rows. Aggregate functions can appear in select lists and in ORDER BY and HAVING clauses. They are commonly used with the GROUP BY clause in a SELECT statement, where Oracle Database divides the rows of a queried table or view into groups. In a query containing a GROUP BY clause, the elements of the select list can be aggregate functions, GROUP BY expressions, constants, or expressions involving one of these. Oracle applies the aggregate functions to each group of rows and returns a single result row for each group.
If you omit the GROUP BY clause, then Oracle applies aggregate functions in the select list to all the rows in the queried table or view. You use aggregate functions in the HAVING clause to eliminate groups from the output based on the results of the aggregate functions, rather than on the values of the individual rows of the queried table or view.
let me know if you are feeling any problem in understanding.
thanks.
Edited by: varun4dba on Jan 27, 2011 3:32 PM

Base tables for aggragates and Multiproviders

Is RSDICMULTIIOBJ the base table for Multiproviders?
What is the base table for Aggragates and units?

Multiproviders
RSDCUBEMULTI
RSDICMULTIIOBJ
Aggregates
RSDDAGGREF
RSDDAGGRT
RSDDCVERREPAGGR
RSDDAGGR
RSDDAGGRCOMP
RSDDAGGRDIR
RSDDAGGRDIR_M

Self Join and Aggregate Functions

Hi all,
I am trying a query in TOAD where I need to use an aggregate function MAX and a self join using a subquery. Its working fine when there is no aggregate function but when I tried to use the MAX function then its running for infi time. Is it because of the invalid joins? or because of the usage of the self join and aggregate func?
The query contains some other tables too....
Any one please help....
Thanks in advance,
G

Toad will bring back a limited set of rows and present them to you giving the impression that the work is done. Adding an aggregate function requires the entire resultset to be traversed.
Yes, post the 2 queries to verify what I am saying.

Link Between PSA and Data Targets

Hi Experts,
Could you please help me is there any table which will have PSA & data target (Cube or ODS) details.
I know the table which will have data target manage screen details and other table wil give the details like data loaded into till PSA.
But i want to know any SAP table will have link between PSA & data target.
I want to know if the request is loaded till PSA or it is loaded into data target.
Any table will give details like PSA request no, if target is there then some kind of flag like....
Please let me know if any one know the table which will have PSA as well as Data target details.
Thaks in Advance
Shaik

Hi,
I clearly mentioned im aware of Manage screen details table, i want link between PSA and Data target table which will return if requst loaded till PSA or PSA & target.
Im using BI 7.0 .
Regards
Shaik

Table for Customer and vendor open balance on a key date

Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.

Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu

Xcelsius Dashboard on SAP R/3 Table using BSP and XML Mapping

Hi Experts,
I have developed a simple dashboard on small data set (10 records) that I am fetching from a R/3 Table into BSP and generating XML from there and consuming it in Xcelsius (SAP R/3 + BSP + XML Mapping).
Now I want to fetch data based on Variables values that should be passed from the dashboard at the runtime and should display the data accordingly. Any help on how it can be achieved?
Thanks..!!
Sharad

Hi,
You could try doing this by using XML data connection. You would have to make use of Enable load to get the data from XML and Enable send to send data back to XML from dashboard.
This would require you to write a script.
Thanks,
Amit

Need To Create a table in Sql Server and do some culculation into the table from Oracle and Sql

Hello All,
I'm moving a data from Oracle to Sql Server with ETL (80 tables with data) and i want to track the number of records that i moving on the daily basis , so i need to create a table in SQL Server, wilth 4 columns , Table name, OracleRowsCount, SqlRowCount,
and Diff(OracleRowsCount - SqlRowCount) that will tell me the each table how many rows i have in Oracle, how many rows i have in SQL after ETL load, and different between them, something like that:
Table Name OracleRowsCount   SqlRowCount  Diff
Customer                150                 150
0
Sales                      2000                1998
2
Devisions                 5                       5
0
(I can add alot of SQL Tasks and variables per each table but it not seems logicly to do that, i tryid to find a way to deal with that in vb but i didn't find)
What the simplest way to do it ?
Thank you
Best Regards
Daniel

Hi Daniel,
According to your description, what you want is an indicator to show whether all the rows are inserted to the destination table. To achieve your goal, you can add a Row Count Transformation following the OLE DB Destination, and redirect bad rows to the Row
Count Transformation. This way, we can get the count of the bad rows without redirecting these rows. Since the row count value is stored in a variable, we can create another string type variable to retrieve the row count value from the variable used by the
Row Count Transformation, and then use a Send Mail Task to send the row count value in an email message body. You can also insert the row count value to the SQL Server table through Execute SQL Task. Then, you can check whether bad rows were generated in the
package by querying this table.
Regards,
Mike Yin
TechNet Community Support

How to pick max value from a column of a table using cursor and iteration

Hello Everybody
I have a table loan_detail
and a column in it loan_amount
now i want to pick values from this table using cursor and then by using iteration i want to pick max value from it using that cursor
here is my table
LOAN_AMOUNT
100
200
300
400
500
5600
700i was able to do it using simple loop concepts but when i was trying to do this by using cursor i was not able to do it .
Regards
Peeyush

SQL> SELECT MAX(sal) Highest_Sal,MIN(sal) Lowest_Sal FROM emp;
HIGHEST_SAL LOWEST_SAL
       5000        800
SQL> set serverout on
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := counter;
10      counter := counter + 1;
11    END LOOP;
12    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
13    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
14 END;
15 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Even smaller
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := 1;
10    END LOOP;
11    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
12    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
13 END;
14 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Edited by: Saubhik on Jan 5, 2011 4:41 PM

Tables in PSA and Aggregates

Similar Messages

Maybe you are looking for