Tablespace full, mostly due to recyclebin

We have a tablespace that has become full (ORA-01653: unable to extend table xxx by 64 in tablespace ODI_WORK)
There is about 24GB of recycle-bin objects in that tablespace.
According to the Database Administrators Guide (http://docs.oracle.com/cd/E11882_01/server.112/e25494/tables011.htm#sthref2311) says:
Dropped tables and any associated objects such as indexes, constraints, nested tables, and the likes are not removed and still occupy space. They continue to count against user space quotas, until specifically purged from the recycle bin or the unlikely situation where they must be purged by the database because of tablespace space constraints.
So, we have apparently reached the space constraints; why were the objects not purged?
select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
5 rows selected.
Thanks,
Mike

The space held by dropped objects is reusable so you should remove this figure in your space management queries. If an object needs an extent and there are not renough free extents to hold the request extents will be taken from the recycle bin to fill the request. You should not have to purge the recycle bin to make free extents however I am in favor or purging objects that you know will not need to be restored.
HTH -- Mark D Powell --

Similar Messages

HT4914 If my phone's memory is full, mostly due to music, how can I make it to where my IPad holds all the music and remove all of it from my phone without losing any of it??

If my phone's memory is full, mostly due to music, how can I make it to where my IPad holds all the music and remove all of it from my phone without losing any of it? I recently got an iPad so I now use that as my main source as opposed to my Dell. Yes, I have a Dell that failed me. Miserably.

Sync your music from your computer to your iPad. Then delete the music from your iPhone.

The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

You can store your iTunes library on a Time Capsule. So that you can access on your local (home) network (I wouldn't recommend access via the internat), (off site.....to slow).
If you do decide to put your libray on Time Capsule I'd recommend doing this.
Option 1:
1. Don't use TC as a Backup (Time Machine).
2. Connect a USB drive to your TC or Computer and backup to the drive. Backup when a change is made to the library (adding Apps, Songs you get the idea).
Option 2: (What Im doing)
1.   Two Time Capsule's connected via ethernet cable (roaming mode, bridge).
2.   Use TC1 as a Time Machine backup
3.   Use TC2 as network drive. (The information on TC2 does NOT get backed up to TC1).
3a. Connect a USB, FW, drive to your desktop computer (if you have one) use SilverKeeper to schedule backups.       Silverkeeper will look at TC2 and back it up to a external or internal HD. I've been doing the or some time now. Or connect to your TC and do an archive.
I have this setup because I don't trust Cloud base services and I want access to my files (in Sync) on TC where ever I am, as long as there's a internet connection. It's expensive, but does exactly what I expect.
The most important thing is to safe guard your data in case of a failure.
In your situation it would probably be better to get a high speed SD or thumb drive, however I've never been successful in backing up those type of drives with TM. What ever you decide to do make sure you have a GOOD duplicate (backup).

Temporary tablespace Full error 10g RAC.

Hi All,
Can any one help me in below problem.
After migrating one of database from single node to two node RAC database. we are facing temporary tablespace full problem. The database previously have 2 GB of temporary tablespace but after moving to RAC enviornment it is filling 32 GB of space and still generate error.
Thanks & Regards
Shailendra Wanjari

FIND OUT WHO IS USING THAT TEMP.. I USE WHEN I SEE TEMP IS BEING EATEN UP...
column tablespace format a12
column username format a12
break on username nodup skip 1
select se.username
,se.sid
,su.extents
,su.blocks * to_number(rtrim(p.value)) as Space
,tablespace
,segtype
from v$sort_usage su
,v$parameter p
,v$session se
where p.name = 'db_block_size'
and su.session_addr = se.saddr
order by se.username, se.sid
/

Tablespace full

Hi,
When I repeatedly delete table entries and keep entries in dat files (on unix) and retrieve back those entries using sqlldr, the tablespace gets full even though table is empty. After a while, sqlldr fails to load because of tablespace full. If I increase tablespace for those tables, again after a while they gets full. Could anybody please tell me how to free table spaces.
SHAMIM
Software Developer
TaracomNetworks

It's a misconception that if you delete from tables the 'space' is now available. That is not necessary the case.
You also have to take into consideration the parameters that the tablespace was created with. It may be trying to allocation more space than is available.
There is also the problem of fragmentation.
If possible either add another datafile to the tablespace, or export the database , drop the tables, and drop and re-create the tablespace (with more space and parameters exactly as you want)
null

Ur temprory tablespace full . how u resize or increase size of file .

ur temprory tablespace full . how u resize or increase size of file .u have no more space .how u slove

Answers in your duplicated thread: Some inter view Questions Please give prefect answer help me
You can get all the answers at http://tahiti.oracle.com.
You understimate job recruiters, a simple crosscheck is enough to discard people with experience from people who memorize 'interview answers'.
Don't expect to get a job just because you memorize answers for 'job interviews', get real life experience.

Temp tablespace full at startup

Hi,
my temp tablespace appears full at database startup. I know it is full because the collecting statistics process can not be executed since temp tablespace can not grow (autoextend off). I had to add another temp datafile to get the statistics but first one continues full after each restart.
Is this any signal of malfunction?
Thanks for all.
Greetings.

ok. I think all is understood.
DBMS_STATS.GATHER_SCHEMA_STATS probably needed more disk than 1.5 GB (my old temp tablespace), so the result was
ERROR en línea 1:
ORA-01652: no se ha podido ampliar el segmento temporal con 128 en el
tablespace TEMP
ORA-06512: en "SYS.DBMS_STATS", línea 9136
ORA-06512: en "SYS.DBMS_STATS", línea 9616
ORA-06512: en "SYS.DBMS_STATS", línea 9800
ORA-06512: en "SYS.DBMS_STATS", línea 9854
ORA-06512: en "SYS.DBMS_STATS", línea 9831
ORA-06512: en línea 1
Then adding new datafile (1.5 GB more) process could finish. Database continues growing, process always had finished not yesterday: the day of needing full temp tablespace came.
Tell me if I am wrong.
Thanks a lot.

"Event test "Tablespace full" failed: syntax" on some databases

On OEM 9i (9.2) I have got some failed events due to syntax.
I use the same event also for other databases where it works fine.
I already looked at the tcl files and compared it with a database server where it works fine, there is no difference. The monitored database is 9.2.0.6 standard edition.
What's wrong ? Anyone have a tip or hint to check ?

I set the agent tracelevel (dbsnmp.trace_level=16 in snmp_rw.ora) restarted the agent and got following messages. For tbsfull is checks all tablespaces correctly, but after that it returns MESSAGE - -1. Whatever that means....
tbspfull: 'USERS', used = 448.0, ratio = 0.01, available = 4095552.0
tbspfull : TD01 : Mon Aug 21 15:36:33 2006 : MESSAGE - -1,
sesslmt : TD01 : Mon Aug 21 15:36:53 2006 : 60, 170, 35.2941176471
sesslmt : TD01 : Mon Aug 21 15:36:53 2006 : MESSAGE - -1,
proclmt : TD01 : Mon Aug 21 15:36:53 2006 : 61, 150, 40.6666666667
proclmt : TD01 : Mon Aug 21 15:36:53 2006 : MESSAGE - -1,
locklmt : TD01 : Mon Aug 21 15:36:53 2006 : 0, 748, 0.0
locklmt : TD01 : Mon Aug 21 15:36:53 2006 : MESSAGE - -1,
dfilelmt : TD01 : Mon Aug 21 15:36:54 2006 : 20, 200, 10.0
dfilelmt : TD01 : Mon Aug 21 15:36:54 2006 : MESSAGE - -1,

SYSTEM tablespace full

Hi,
I am new to Oracle database. Currently I am using Oracle 10g version 10.2.0.4. I noticed that the SYSTEM tablespace is 100%, may I know what's the impact to the database server? Will it slow down all the transactions to process?
Thanks.

Your car won't run fast or slow if your gas tank is completely full or half full! The tablespace being full or not completely full won't decide the performance of the database. Since the tablespace is System tablespace which is supposed to store the data dictionary, it being full may hinder the working of the database since there is no more space left the dictionary. But if you would purely do queries without doing any changes at all, those queries performance won't be determined from the tablespace, whichever it may be, being full or not being full.
That said, this is a rather wrong criteria to check the performance. If you want to check performance, first take a feedback from the users and than get a report using Statspack or AWR( if you have license for it) and see what does the report says. If you find anything wrong in it than only imagine it as an issue and try to fix it.
HTH
Aman....

Temporary tablespace full

My temporary tablespace is full, i dont know if i should drop the tablespace and re-cretae a new one or extend the the size of the file available

hi Olu,
You will only need to worry if you start to see errors in the alert log file. If you don't then temp being full is not an issue.
regards
alan

SYSAUX tablespace full and snapshots not deleted

hi all,
I am on 10g linux.
1) my sysaux tablespace is full and i realize there are many awr snapshots lying around.
so i went to my OEM console -> Automatic Workload Repository and this are basically my settings
Snapshot Retention (days) 7
Snapshot Interval (minutes) 60
Collection Level TYPICAL
Next Snapshot Capture Time Sep 25, 2012 8:27:41 AM
However, when i check the amount of snapshots
->
Manage Snapshots and Preserved Snapshot Sets
Snapshots 247
Preserved Snapshot Sets 0
Latest Snapshot Time Sep 25, 2012 7:27:41 AM
Earliest Snapshot Time Jun 27, 2012 10:20:16 PM
q1) i have got 247 snapshots dated as early as Jun 27 but i am only retaining 7 days of snapshots ?
7 * 24 (1 hour snapshot frequency) != 247
there is no snapshot baseline also.
q2) why my latest snapshot time is dated way back to sept 25 ? is it because my sysaux is full for a longtime thus no more snapshot can be taken ? but i thought the retention of 7 days will remove obsolete snapshots ?
Please advise.
Regards,
Noob

Hi,
there are some problem in delete AWR stats.
For example, if the delete takes more 5 minute it's interrupted.
Look which component grows using awrinfo.sql under $ORACLE_HOME/rdbms/admin
You may execute the delete procedure manually than move and rebuild the tables.

SYSAUX tablespace full

Hi,
What will happen if SYSAUX tablespace size is full and we do not increase the size?
Will the database hang or continue to run?
AFAIK if SYSTEM tablespace is full then database gets hanged.
Edited by: oratest on Feb 13, 2010 11:00 PM

If sysaux tblsp is full, the database would still remain operational except the functionality associated with AWR will not work. I would expect that the snapshots that by default gets gathered every hour cannot be stored anymore unless you increase the sysaux tablespace size.
Your database users would still be able to work normally though.

Unable to do a Full backup due to missing archived Files

I had setup everything to do a full backup and when the job started, it failed. It seems not able to find the archived file.
I had deleted the archived File earlier due to low storage space. Can anybody advised me ? Thanks in advance.
------From Job --------
switch logfile executed
Recovery Manager: Release 8.1.7.0.0 - Production
RMAN-06005: connected to target database: DB (DBID=97457188)
RMAN-06008: connected to recovery catalog database
RMAN> run {
2> allocate channel DB_Channel type disk format 'Z:\b_%u_%s_%p';
3> backup incremental level 1 ( database include current controlfile );
4> backup ( archivelog all
5> delete input );
6>
7> }
8>
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: DB_Channel
RMAN-08500: channel DB_Channel: sid=15 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03025: performing implicit partial resync of recovery catalog
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-06052: no parent backup or copy of datafile 22 found
RMAN-03023: executing command: backup
RMAN-08008: channel DB_Channel: starting incremental level 1 datafile backupset
RMAN-08502: set_count=24 set_stamp=454219212 creation_time=FEB 19 2002 04:00:12
RMAN-08010: channel DB_Channel: specifying datafile(s) in backupset
RMAN-08522: input datafile fno=00002 name=E:\ORACLE\ORADATA\DB\RBS01.DBF
RMAN-08522: input datafile fno=00001 name=D:\ORACLE\ORADATA\DB\SYSTEM01.DBF
RMAN-08011: including current controlfile in backupset
RMAN-08522: input datafile fno=00009 name=H:\ORACLE\ORADATA\DB\CALL_H1.ORA
RMAN-08522: input datafile fno=00013 name=H:\ORACLE\ORADATA\DB\OPT1.ORA
RMAN-08522: input datafile fno=00015 name=H:\ORACLE\ORADATA\DB\CALL_H2.ORA
RMAN-08522: input datafile fno=00017 name=H:\ORACLE\ORADATA\DB\OPT2.ORA
RMAN-08522: input datafile fno=00022 name=H:\ORACLE\ORADATA\DB\CALL_H3.ORA
RMAN-08522: input datafile fno=00003 name=D:\ORACLE\ORADATA\DB\USERS01.DBF
RMAN-08522: input datafile fno=00004 name=E:\ORACLE\ORADATA\DB\TEMP01.DBF
RMAN-08522: input datafile fno=00006 name=E:\ORACLE\ORADATA\DB\INDX01.DBF
RMAN-08522: input datafile fno=00008 name=H:\ORACLE\ORADATA\DB\CALL_L1.ORA
RMAN-08522: input datafile fno=00010 name=H:\ORACLE\ORADATA\DB\TIC1.ORA
RMAN-08522: input datafile fno=00011 name=H:\ORACLE\ORADATA\DB\OTH1.ORA
RMAN-08522: input datafile fno=00012 name=H:\ORACLE\ORADATA\DB\SS1.ORA
RMAN-08522: input datafile fno=00014 name=H:\ORACLE\ORADATA\DB\REP1.ORA
RMAN-08522: input datafile fno=00016 name=H:\ORACLE\ORADATA\DB\CALL_L2.ORA
RMAN-08522: input datafile fno=00018 name=H:\ORACLE\ORADATA\DB\OTH2.ORA
RMAN-08522: input datafile fno=00019 name=H:\ORACLE\ORADATA\DB\REP2.ORA
RMAN-08522: input datafile fno=00020 name=H:\ORACLE\ORADATA\DB\SS2.ORA
RMAN-08522: input datafile fno=00021 name=H:\ORACLE\ORADATA\DB\TIC2.ORA
RMAN-08522: input datafile fno=00007 name=D:\ORACLE\ORADATA\DB\OEM_REPOSITORY.ORA
RMAN-08522: input datafile fno=00023 name=H:\ORACLE\ORADATA\DB\RCVCAT01.ORA
RMAN-08522: input datafile fno=00005 name=D:\ORACLE\ORADATA\DB\TOOLS01.DBF
RMAN-08013: channel DB_Channel: piece 1 created
RMAN-08503: piece handle=Z:\B_0ODH5LEC_24_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:02:48
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-03022: compiling command: backup
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: DB_Channel
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: backup
RMAN-06089: archived log G:\ORACLE\ORADATA\DB\ARCHIVE\DBT001S03368.ARC not found or out of sync with catalog
Recovery Manager complete.
child process exited abnormally

The RMAN Crosscheck command only validates that what RMAN thinks is backed up really is.
The Change archivelog all validate is what you need to run when you delete archivelogs before they have been backed up by RMAN.
If you have to restore a backup that was made before you deleted the archive logs, you will not be able to perform a full recovery.
You may want to consider running just archivelog backups more often and have RMAN delete them after they have been successfully backed up. In Oracle9i Release 2, there is an option to delete the archive logs after they have been backed up X number of times in case you want the logs duplex archivelog backups.

Undo tablespace full even with no active transaction and undo_retention 10s

The 9.2.0.4 instance is AUM (auto undo management). The undo table space is 50G and is almost full.
I have set the undo_retention to 10, previously it was 10800 (3hours). I restart the database. Wait quite long time.
And search on the dba_undo_extents.
select sum(bytes/(1024*1024*1024)),status from dba_undo_extents d where d.tablespace_name='UNDOTBS2' group by status;
SUM(BYTES/(1024*1024*1024)) STATUS
.574447632 EXPIRED
45.5358887 UNEXPIRED
It is hard to explain. 10 seconds already passed, at least all the extents should be expired.
Why so many 45G is still unexpried.
Is there a bug for undo tablespace? how to fix it.
It is a rac instance, I am trouble shooting the undo tablespace issues.
The UNDOTBS2 is for node2 to use.

If you start the database in exclusive (one instance) mode then the database instance can have only one undo tablespace so I would not expect Oracle to do anything with the undo tablespace for the non-running instance.
Run you database as normal and generate undo. See if the status changes. If if does that would imply that Oracle does not expire undo unless the undo segments (rbs segments) are accessed. Please post back with results of what you see.
Between having batch production running on all my databases that use undo tablespaces and the fact we use uniform extent undo tabllespaces I am not in a position to try to duplicate what you are seeing.
HTH -- Mark D Powell --

Tablespace full, but actually there still are huge space free

Oracle alert "Tablespace [BITEMP] only has [0 megabytes ] free space", but actually there still are huge space free.
I create three datafiles(20g / datafile). One of them is full, the others are free.
Why?

Calling a person 'dear' is IMO too a familiar/intimate form of address in a support forum frequented by software professionals.
In the same vein, "I M" speak is not acceptable either. This is not instant message communication. We are not restricted to a difficult to use mobile phone keypad. We are not restricted in message size.
In fact, as software professionals we all know just how important it is to convey information accurately and correctly when dealing with technical issues. There is no place for "I M" speak in such an environment.
I kindly suggest that you give consideration to these points.

Tablespace full, mostly due to recyclebin

Similar Messages

Maybe you are looking for