Unable to do a Full backup due to missing archived Files

I had setup everything to do a full backup and when the job started, it failed. It seems not able to find the archived file.
I had deleted the archived File earlier due to low storage space. Can anybody advised me ? Thanks in advance.
------From Job --------
switch logfile executed
Recovery Manager: Release 8.1.7.0.0 - Production
RMAN-06005: connected to target database: DB (DBID=97457188)
RMAN-06008: connected to recovery catalog database
RMAN> run {
2> allocate channel DB_Channel type disk format 'Z:\b_%u_%s_%p';
3> backup incremental level 1 ( database include current controlfile );
4> backup ( archivelog all
5> delete input );
6>
7> }
8>
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: DB_Channel
RMAN-08500: channel DB_Channel: sid=15 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03025: performing implicit partial resync of recovery catalog
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-06052: no parent backup or copy of datafile 22 found
RMAN-03023: executing command: backup
RMAN-08008: channel DB_Channel: starting incremental level 1 datafile backupset
RMAN-08502: set_count=24 set_stamp=454219212 creation_time=FEB 19 2002 04:00:12
RMAN-08010: channel DB_Channel: specifying datafile(s) in backupset
RMAN-08522: input datafile fno=00002 name=E:\ORACLE\ORADATA\DB\RBS01.DBF
RMAN-08522: input datafile fno=00001 name=D:\ORACLE\ORADATA\DB\SYSTEM01.DBF
RMAN-08011: including current controlfile in backupset
RMAN-08522: input datafile fno=00009 name=H:\ORACLE\ORADATA\DB\CALL_H1.ORA
RMAN-08522: input datafile fno=00013 name=H:\ORACLE\ORADATA\DB\OPT1.ORA
RMAN-08522: input datafile fno=00015 name=H:\ORACLE\ORADATA\DB\CALL_H2.ORA
RMAN-08522: input datafile fno=00017 name=H:\ORACLE\ORADATA\DB\OPT2.ORA
RMAN-08522: input datafile fno=00022 name=H:\ORACLE\ORADATA\DB\CALL_H3.ORA
RMAN-08522: input datafile fno=00003 name=D:\ORACLE\ORADATA\DB\USERS01.DBF
RMAN-08522: input datafile fno=00004 name=E:\ORACLE\ORADATA\DB\TEMP01.DBF
RMAN-08522: input datafile fno=00006 name=E:\ORACLE\ORADATA\DB\INDX01.DBF
RMAN-08522: input datafile fno=00008 name=H:\ORACLE\ORADATA\DB\CALL_L1.ORA
RMAN-08522: input datafile fno=00010 name=H:\ORACLE\ORADATA\DB\TIC1.ORA
RMAN-08522: input datafile fno=00011 name=H:\ORACLE\ORADATA\DB\OTH1.ORA
RMAN-08522: input datafile fno=00012 name=H:\ORACLE\ORADATA\DB\SS1.ORA
RMAN-08522: input datafile fno=00014 name=H:\ORACLE\ORADATA\DB\REP1.ORA
RMAN-08522: input datafile fno=00016 name=H:\ORACLE\ORADATA\DB\CALL_L2.ORA
RMAN-08522: input datafile fno=00018 name=H:\ORACLE\ORADATA\DB\OTH2.ORA
RMAN-08522: input datafile fno=00019 name=H:\ORACLE\ORADATA\DB\REP2.ORA
RMAN-08522: input datafile fno=00020 name=H:\ORACLE\ORADATA\DB\SS2.ORA
RMAN-08522: input datafile fno=00021 name=H:\ORACLE\ORADATA\DB\TIC2.ORA
RMAN-08522: input datafile fno=00007 name=D:\ORACLE\ORADATA\DB\OEM_REPOSITORY.ORA
RMAN-08522: input datafile fno=00023 name=H:\ORACLE\ORADATA\DB\RCVCAT01.ORA
RMAN-08522: input datafile fno=00005 name=D:\ORACLE\ORADATA\DB\TOOLS01.DBF
RMAN-08013: channel DB_Channel: piece 1 created
RMAN-08503: piece handle=Z:\B_0ODH5LEC_24_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:02:48
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-03022: compiling command: backup
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: DB_Channel
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: backup
RMAN-06089: archived log G:\ORACLE\ORADATA\DB\ARCHIVE\DBT001S03368.ARC not found or out of sync with catalog
Recovery Manager complete.
child process exited abnormally

The RMAN Crosscheck command only validates that what RMAN thinks is backed up really is.
The Change archivelog all validate is what you need to run when you delete archivelogs before they have been backed up by RMAN.
If you have to restore a backup that was made before you deleted the archive logs, you will not be able to perform a full recovery.
You may want to consider running just archivelog backups more often and have RMAN delete them after they have been successfully backed up. In Oracle9i Release 2, there is an option to delete the archive logs after they have been backed up X number of times in case you want the logs duplex archivelog backups.

Similar Messages

Fileupload issue. Unable to get the full local directory path of the file uploaded

Fileupload Applet Issue with Firefox 15:
When uploading a file using our application, file that is being uploaded is hashed using a signed Applet.
This is working fine in IE and FF version lower than FF15.
Signed applet needs to hash file contents but it is is unable to read the full path of the uploaded file, and thus failing.
Applet expects the full path of the file that has been uploaded
Is there any way to get the full file path?

Is not a new feature and not really a bug, but rather a security change that they have cleaned up code and removed the ability to use UniversalXPConnect that made it possible in older Firefox versions to get enhanced privileges.<br />
That is no longer possible, so any code that relies on it will fail silently.<br />
You will now require an extension to run any code that requires enhanced XPCOM permissions.

Standby database is not applying redo logs due to missing archive log

We use 9.2.0.7 Oracle Database. My goal is to create a physical standby database.
I have followed all the steps necessary to fulfill this in Oracle Data Guard Concepts and Administration manual. Archived redo logs are transmitted from primary to standby database regularly. But the logs are not applied due to archive log gap.
SQL> select process, status from v$managed_standby;
PROCESS STATUS
ARCH CONNECTED
ARCH CONNECTED
MRP0 WAIT_FOR_GAP
RFS RECEIVING
RFS ATTACHED
SQL> select * from v$archive_gap;
THREAD# LOW_SEQUENCE# HIGH_SEQUENCE#
1 503 677
I have tried to find the missing archives on the primary database, but was unable to. They have been deleted (somehow) regularly by the existing backup policy on the primary database. I have looked up the backups, but these archive logs are too old to be in the backup. Backup retention policy is 1 redundant backup of each file. I didn't save older backups as I didn't really need them from up to this point.
I have cross checked (using rman crosscheck) the archive log copies on the primary database and deleted the "obsolete" copies of archive logs. But, v$archived_log view on the primary database only marked those entries as "deleted". Unfortunately, the standby database is still waiting for those logs to "close the gap" and doesn't apply the redo logs at all. I am reluctant to recreate the control file on the primary database as I'm afraid this occurred through the regular database backup operations, due to current backup retention policy and it probably might happen again.
The standby creation procedure was done by using the data files from 3 days ago. The archive logs which are "producing the gap" are older than a month, and are probably unneeded for standby recovery.
What shall I do?
Kind regards and thanks in advance,
Milivoj

On a physical standby database
To determine if there is an archive gap on your physical standby database, query the V$ARCHIVE_GAP view as shown in the following example:
SQL> SELECT * FROM V$ARCHIVE_GAP;
THREAD# LOW_SEQUENCE# HIGH_SEQUENCE#
1 7 10
The output from the previous example indicates your physical standby database is currently missing log files from sequence 7 to sequence 10 for thread 1.
After you identify the gap, issue the following SQL statement on the primary database to locate the archived redo log files on your primary
database (assuming the local archive destination on the primary database is LOG_ARCHIVE_DEST_1):
SQL> SELECT NAME FROM V$ARCHIVED_LOG WHERE THREAD#=1 AND DEST_ID=1 AND 2> SEQUENCE# BETWEEN 7 AND 10;
NAME
/primary/thread1_dest/arcr_1_7.arc /primary/thread1_dest/arcr_1_8.arc /primary/thread1_dest/arcr_1_9.arc
Copy these log files to your physical standby database and register them using the ALTER DATABASE REGISTER LOGFILE statement on your physical standby database. For example:
SQL> ALTER DATABASE REGISTER LOGFILE
'/physical_standby1/thread1_dest/arcr_1_7.arc';
SQL> ALTER DATABASE REGISTER LOGFILE
'/physical_standby1/thread1_dest/arcr_1_8.arc';
After you register these log files on the physical standby database, you can restart Redo Apply.
Note:
The V$ARCHIVE_GAP fixed view on a physical standby database only returns the next gap that is currently blocking Redo Apply from continuing. After resolving the gap and starting Redo Apply, query the V$ARCHIVE_GAP fixed view again on the physical standby database to determine the next gap sequence, if there is one. Repeat this process until there are no more gaps.
Restoring the archived logs from the backup set
If the archived logs are not available in the archive destination then at that time we need to restore the required archived logs from the backup step. This task is accomplished in the following way.
To restore range specified archived logs:
Run {
Set archivelog destination to '/oracle/arch/arch_restore'
Restore archivelog from logseq=<xxxxx> until logseq=<xxxxxxx>
To restore all the archived logs:
Run {
Set archivelog destination to '/oracle/arch/arch_restore';
Restore archivelog all;
}

Unable to install ituns on windows 7 64 missing .dll file

Unable to install ituns on windows 7 64. Installer states missing .dll file.

Here is a solution that worked for a user who also had a problem with iTunes Software Support. This thread was for a win32 version, but Maybe this is the problem for both of you?:
IT appears that AppleApplicationSupport.msi, is not opening and installing properly.
Download and SAVE iTunesSetup.exe, where you can find it.
Then:
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally.
Here is a link to that fairly lengthy thread.. http://discussions.info.apple.com/thread.jspa?threadID=2151777&tstart=-1

Duplicate target database - is failed due to missing archive log

Hi,
"duplicate target database to " is failed due to required archive log is not found on tape.
After mounting the right tape, how to proceed , please suggest
ERROR:-->
RMAN>
connect catalog *******
connect auxiliary /
connect target ******
Run {
set until time '16-NOV-2008 23:50';
allocate auxiliary channel t1 type 'sbt_tape' parms ....
duplicate target database to mydb;
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/30/2008 10:27:00
RMAN-03015: error occurred in stored script Memory Script
ORA-19501: read error on file "orcl_ARCHIVES_BACKUP_0811160110_u0jvq7vt_1
_1", blockno 1 (blocksize=512)
ORA-27190: skgfrd: sbtread2 returned error
ORA-19511: Error received from media manager layer, error text:
ANS1314E (RC14) File data currently unavailable on server
Recovery Manager complete.
Thanks In Advance,

This is basically not a RMAN problem,but a media management issue,which has to be addressed to the TSM staff:
ANS1314E
File data currently unavailable on server
Explanation:
The file data is currently unavailable on the server. A retrieve or restore operation was attempted. Possible causes are:
Data was corrupted at the server
Server found a read error
File is temporarily involved in a reclaim operation at the server
Server requested a tape volume that was marked unavailable.
System action:
Processing stopped.
User response:
Retry the operation. If the problem continues, see your system administrator to determine the problem from the server console or the activity log. Check whether any requests were made for a tape volume that was unavailable. A tape volume may be marked unavailable if prior read errors were encountered or the volume is checked out of the tape library.
Werner

Iphone backup due to missing ring tones

Hi, I am missing my personal ring tones on my iphone. But I only have one backup in itunes. Is it possible to restore a previous backup with time machine? Or any other idea? Many thanks, Helmut

The RMAN Crosscheck command only validates that what RMAN thinks is backed up really is.
The Change archivelog all validate is what you need to run when you delete archivelogs before they have been backed up by RMAN.
If you have to restore a backup that was made before you deleted the archive logs, you will not be able to perform a full recovery.
You may want to consider running just archivelog backups more often and have RMAN delete them after they have been successfully backed up. In Oracle9i Release 2, there is an option to delete the archive logs after they have been backed up X number of times in case you want the logs duplex archivelog backups.

My system was re-set during repairs and I have lost my Firefox bookmarks. Are these stored anywhere on the system? I did a full backup of documents and programme files before repair, but can't find any bookmark file.

I did not do backups of the bookmarks regularly, since I thought these would be saved somewhere. However, I can't find any bookmark files on my backed-up system.

Thanks - now I can see an applications folder, and have found a .default file, hope this is the one. Should I now follow these instructiosn to restore my profile, or just go to organise bookmarks and import the default file?
Copying files between profile folders
Note: Firefox must be closed down while copying files between profile folders.
1. Open your profile folder:
* (Firefox 3.0 and 3.5): See How to find your profile
1. (Firefox 3.6): At the top of the Firefox windowOn the menu bar, click on the Help menu and select Troubleshooting Information.... The Troubleshooting Information tab will open.
2. Under Application Basics, click on Open Containing FolderShow in Finder.
2. From the menu at the top of the Firefox windowbar, select FileFirefox and then select the ExitQuit FirefoxQuit menu item.
3. Right-clickHold down the Ctrl key while you click on a file you want to copy and choose Copy.
4. Open the new Firefox profile folder.
5. Right-clickHold down the Ctrl key while you click inside the profile folder and choose Paste Item.
Repeat steps 2-5 for each file you wish to transfer over to your new profile folder.
While copying your personal data from an old Firefox profile to a new Firefox profile, it is possible that you could copy over the file that is causing the problem you are trying to get rid of! The more files you copy over, the greater the chance of this happening. It is therefore recommended that:

TCP: Incomplete TCP data segment for full reassembly, due to missing continuation message.

Once a day we're hitting this error. What does it mean, any idea why?
We have following situation:
ServerA is calling a standard web service (http post with soap request) to ServerB. This same web service gets called many times a day. But only once a day I get error in the subject! (SOAP message is truncated as a result.) I log the error and then when
I reissue the same request later (calling the same web service again) everything is fine !?!?!
I'm capturing traffic on ServerA (the one that's calling).
Any idea? Thank you!

It's hard to say without looking at the trace. Both the receiver/sender will resend messages if they are lost over a TCP connection. The result in a trace will show the TCP message, a small delay, then a retransmit. But in the end, the result
should be invisible to the HTTP/SOAP layer above it. So I feel that there is something else going on, but it's hard to say.
I believe you are also saying that your application is getting an error at the same time you see this problem in the trace, is that correct?
If this is true, I would look at the SOAP request/response in the trace and compare that to what you are sending. Are they the same? Does it look incomplete?
It's difficult to help without a trace to example. If you want to share one with me via email, feel free to contact me from the blog (http://blogs.technet.com), and then we can start an email thread.
Paul

Time Machine backup set is missing some files

Today I noticed that some files I last worked on in August have disappeared from my computer. They were pdfs, word and vectorworks (cad) files in different folders – they could not have been accidently trashed. They were active work files from May until late August so they should have been backed up by Time Machine sometime in the past few months. But when I browse the backup sets these files are nowhere to be seen (and of course my daily Superduper bootable clone doesn't have the files either).
The external usb hard drive for Time Machine and the computer are clean according to disk utility, and I've run Onyx a few times to fix permissions.
Does anyone know why files would disappear from both the computer hard drive and the backup sets?

peterkhill wrote:
Thanks for your response. I know it's a mystery.
The files - in some version or other – should be in one of the backup sets, but they aren't. Time Machine hasn't started to delete old backups, as there's plenty of space on the external drive.
Not true. Time Machine "thins" backups normally, regardless of space.
As noted on the TM Preferences panel, it keeps one backup per week for as long as there's room; one per day (the first) for a month; all others for 24 hours. Every time it does a backup, it does "post backup thinning," deleting "expired" backups. So, depending on how long something was on your internal HD before being deleted, and just when various backups were performed, copies of deleted items can disappear as early as 24 hours, or as late as your oldest backup.
I've checked the backups with Timechecker
Do you mean TimeTracker? If not, and it's useful, do you have a link?
and it seems these missing files were never backed up, even when similar files in other folders nearby have been backed up properly.
The Do not back up box is as it should be in Timemachine - the files should have been backed up.
But then the files should still be on the internal HD too.
All I can think of is that the files themselves must have been corrupted somehow, but they are different file types, completed on different days, before and after files that appear to be OK on the internal and on the TM backup. And they must have been corrupted in a way that means that they cannot be found on either the internal HD or in the backup sets.
This is not something I've seen before (and I read at least the title of every thread here). The only thing I can think of is some sort of directory corruption that caused the originals to disappear, and the backups then, eventually, were deleted in the normal fashion.
By the way, I'm not running FileVault.
Do you know of any good data recovery applications?
The one I see here the most is +Data Rescue II.+ I can't recommend for or against it, not having used any of them. They are expensive, and there's no guarantee, although some have a free trial mode that will tell you if anything is recoverable, and perhaps let you recover one file.
Check Google, VersionTracker.com, or MacUpdate.com for +Data Recovery.+ Make certain whatever you get is compatible with Leopard.
Let us know if you have any success.

Can't install ros-hydro-collada-parser due to "missing" header file

Hello,
I'm trying to install ros-hydro-desktop-full on this i686 arch laptop and I got stuck at compiling ros-hydro-collada-parser.
Ros-hydro-collada-parser has collada-dom from aur as a dependency. I have installed it, and all the right files appear in the /usr/include/collada-dom2.4:
[flyer@lapt ../ros-hydro-collada-parser]$ ls /usr/include/collada-dom2.4/
1.4 1.5 dae dae.h dom.h modules
The compilation fails with this:
[ 50%] Building CXX object CMakeFiles/collada_parser.dir/src/collada_parser.cpp.o
/home/flyer/.builds/ros-hydro-collada-parser/src/collada_parser/src/collada_parser.cpp:45:17: fatal error: dae.h: No such file or directory
#include <dae.h>
^
compilation terminated.
CMakeFiles/collada_parser.dir/build.make:57: recipe for target 'CMakeFiles/collada_parser.dir/src/collada_parser.cpp.o' failed
make[2]: *** [CMakeFiles/collada_parser.dir/src/collada_parser.cpp.o] Error 1
CMakeFiles/Makefile2:94: recipe for target 'CMakeFiles/collada_parser.dir/all' failed
make[1]: *** [CMakeFiles/collada_parser.dir/all] Error 2
Makefile:116: recipe for target 'all' failed
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
The full output is here: http://pastebin.com/gAe8MNwb
It works fine on my 64bit arch system. The collada-dom folder is exactly the same and cpp file (collada-parser.cpp) is exactly the same.
How does this <dae.h> include work on my 64bit system and shouldn't it be <collada-dom2.4/dae.h> instead?
Do you have any ideas of what could be the cause of this problem?

Error "Installer Failed to Initialize" | Install desktop application | Windows

Error while compiling Web Dynpro program due to missing JAR files

Hi Experts,
I am getting error message while compiling Web Dynpro program. The erring lines are as below:
          Message message = new MimeMessage(session);
          try {
               message.setFrom(new InternetAddress(fromMailId));
               message.addRecipient(
                    Message.RecipientType.TO,
                    new InternetAddress(toMailId));
               message.setSubject(mailSubject);
               message.setText(mailBody);
               message.setHeader("X-Mailer", "E-Mail");
               message.setSentDate(new Date());
               Transport.send(message);
The error messages are:
Message.ReceipientType can not be resolved
The method send(Message) is undefined for the type Transport
The method setFrom(InternetAddress) is undefined for the type Message
The method setHeader(String, String) is undefined for the type MessageThe method setSentDate(Date) is undefined for the type Message
The method setSubject(String) is undefined for the type Message
The method setText(String) is undefined for the type Message
Type mismatch: cannot convert from MimeMessage to Message
Can you please help me in resolving the issue. It seems that some API is missing. I believe if some one can tell me the name of JAR file / API then I will be able to sort out the issue. I will add these JAR file in my program.
Thanks,
S

HI Stuart,
you are missing the jar files required for sending mail in java
Installing JavaMail
You will need the latest version of JavaMail (Version 1.2) available here:
http://java.sun.com/products/javamail/
Download and unzip the file, in the newly created top level JavaMail directory you will find a number of jar files,
these need adding to your classpath.
To do this in Eclipse, right click on your project in the tree view, select properties, select the libraries tab.
Now click the 'Add external jars' button, navigate to your JavaMail directory and click on the jars.
The tutorial also makes use of the Java Activation Framework, which is available here:
http://java.sun.com/products/javabeans/glasgow/jaf.html
Instalation of JAF is identical to JavaMail
activation.jar / mail.jar are 2 distinct names i remember rest you will get above
P.S: close the question to assist other users narrow the search and find solutions
Message was edited by:
        Armin Reichert

Itunes 6.04 cannot run due to missing required files

Hi there,
I have just installed the new Itunes 6.04, and after installation, there is an error message "iTunes cannot run because some of its required files are missing. Please reinstall iTunes."
I have search through the Forum and did exactly everything suggested there:
1) Uninstall iTunes, uninstall QT (using the normal Add/remove programs within the control panel) and then clean up all directories manually, reboot and then reinstall again. Not working!
2) Download Window clean up and clean the iTunes and QT, the reinstall iTunes, not working!
3) Uninstall QT, uninstall iTunes, install the QT standalong version, install iTunes again, not working!
I am running out of opinions. Maybe I will try to uninstall everything, and then use Regedit to delete anything that is iTunes related registry. Does anyone has a better opinion? or, is it anyway I could check which file(s) are required?
Many thanks,
iPodrc
Windows 2000

Please be careful when editting the registry. Its a good way to really screw your PC up. I would suggest exporting your registry before any large scale edits. Beware the registry file will be huge.
As for your problems, when you uninstalled everything and rebooting after each uninstall. After you got QT installed from a standalone, did it display a video to verfiy it worked? Did you reboot afterwards before trying to install itunes? Also I didn't see it mentioned but make sure you turn off virus and firewall during your install.
I just noticed you are from Germany, when installing what language are you selecting? Also what language is your PC set to?

Cannot open iTunes after upgrade due to missing .dll file

I cannot open iTunes after a recent upgrade.
The error is "Applepushservice.dll is missing. Please reinstall iTunes." Which I have now done 8 times.
I have uninstalled everything, clear the cache and rebooted.
Now what? Can I download the file from somewhere else and if so, where do I install it?
Many thanks.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Itunes 10.7 install fails due to missing config file?

anybody have any ideas on this issue. I can't finish the install upgrading to 10.7 in windows vista. it can't find file c;\config.Msi\14e073.rbf. I checked my wife's laptop which has earlier itunes as well and she does not have the file either. Both looking at buying iphone 4s/5 in near futute and a little disturbed with the thought of not having a computer with itunes associated to our phones. any ideas would be appreciated.

What security software are you running on the PC, j? (Firewall, antivirus, antispyware?)

"itunes cannot run due to missing required files"

it says that and ive download different verisions and forms of itune...HELP!

This error has been associated with spyware terminator blocking certain files.
It might be worth disconnecting from the internet and then disabling all antivirus/ antimalware programs and your firewall and see if that allows the install to go through properly.
If that's not it, this error has been associated with maleware, try a free scan with malwarebytes:
http://www.malwarebytes.org/
The site has a very helpful forum if the scan finds something.

Unable to do a Full backup due to missing archived Files

Similar Messages

Maybe you are looking for