TableView and horizontal scroll bar

Hi
I need to show horizontal scroll bar in my TableView - there are many columns in my view. I tried to put it into the ScrollPane but it takes no any effect.. Is there any ability to make scrollable treeview via FXML layout file?
My code is
<ScrollPane fitToHeight="true" fitToWidth="true" hbarPolicy="ALWAYS" VBox.vgrow="ALWAYS">
<content>
<TableView fx:id="resultsTbl">
<columns>
<TableColumn text="col 1" prefWidth="60" />
<TableColumn text="col 2" prefWidth="60" />
<TableColumn text="col 3" prefWidth="130" />
........cut....
</columns>
<items>
</items>
</TableView>
</content>
</ScrollPane>
Thanks
Edited by: 918392 on 02.03.2012 4:51

OK. If I understand you correctly, you want the table view to fill the scroll pane width when the total column width is less than the scroll pane width, but show a scroll bar when the total column width is greater than the scroll pane width. Is that right? If so, I don't believe that is currently supported. I think there is a feature request for it, but JIRA is down right now so I can't tell for sure.
Feel free to submit a feature request for this if you like, and we'll mark it as a duplicate if necessary.

Similar Messages

Add bookmark button and horizontal scroll bar - bugs on Snow Leopard

Safari after update to 5.1.4, has a bug in interface on Snow Leopard (10.6.8): 'add bookmark' button (combined with addres bar), and horizontal scroll bar didn't look good. I think, that shouldn't happend on flagship Apple browser, on just a little older OS X than 'Lion'.
Clearing (deleting files) 'Cache.db' and .plist files didn't help.

Ok.. maybe corrupted Safari preferences (.plist )
Quit Safari.
Go to ~/Library/Preferences
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
Relaunch Safari. If that helped, move the .plist file to the Trash.
If not, move it back to the Preferences folder.
If that didn't help, go to Safari > Preferences then select the Extensions tab. If you have any installed, turn that OFF, quit then relaunch Safari to test.
If it's not a plugin, try troubleshooting Safari third party unsupported add ons > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
edited by: cs

KM Document Iview and Horizontal scroll bar

I have a simple KM Doc Iview that displays a image. But I get this annoying hosrizontal scrollbar, it should rather display the whole image without the scrollbar. Have anybody experienced this? Any workarounds please? Thanks!

Hi,
Set the height type of the iView to Automatic OR if that doesn't work because of domain issues then set it to fixed and in addition set the iview height to the height of the image + 10~20 px more..
Good Luck
Benjamin Houttuin

Issue with Multithreading and vertical scroll bar - help needed to debug!!!

I have been working on a desktop Visual Studio 2010 application for quite a few years. It is written in C++ and MFC. This code is a combination of code I have written and code I inherited. It worked great for years on Windows XP, but when I ported
it to Windows 7, a tricky problem has come up that I am having the darnest time trying to figure out
In summary, it is a single .exe desktop application. There is the main thread (thread A), which launches another thread (thread B). Both threads share a pointer to a single window object which displays events. This window also implements a vertical and horizontal
scroll bar.
The interaction and message processing between the threads seems a little sticky to me. Both threads A and B call the same member function of the CWnd object. BUT, Thread B ALSO posts messages to thread A's queue.
So, in thread B, you will see code like this, which makes a direct call to the output window object, AND THEN it also posts a message to Thread A's mainframe window like this...
if( m_pEventLog )
pOutputWindow->AddLine("Some test...");
if( m_phNotifyWnd[RECEIVE] && m_puiEventWMsg[RECEIVE] ) {
::PostMessage( m_phNotifyWnd[RECEIVE], m_puiEventWMsg[RECEIVE], 0, (LPARAM) pPkt );
WHEN thread A receives the message that thread B posted above, it only does the following:
LRESULT CMainFrame::OnSocketReceive( WPARAM, LPARAM lParam )
CSPkt* pPkt;
CRWPkt* pRWPkt;
CSPktSocket* pSocket;
ULONG ulType;
CString csTemp;
CBSWords bsWords;
CSSSWords sssWords;
CRWPkt* pLoopBackRWMsg; // used if we have to send a loopback msg back to sender
CLMsg lmsg;
m_wndTextWindow.AddLine("Test message");
return 0;
So both threads are writing to the output window via the .AddLine() member function.
void COutputWnd::AddLine( CString& strLine, COLORREF crColor )
UpdateVScroll();
return;
And this function then makes a call to :UpdateVScroll(). The problem seems to arise because thread B does a
post to thread A, where thread A in turn writes to the output window. Eventually, the program
HANGS in the call to
SetScrollInfo() below...
void COutputWnd::UpdateVScroll()
CSingleLock lock( &m_CSVertScrollLock ); // lock things up while we are in here
BOOL bok = lock.Lock();
if (lock.IsLocked() == TRUE)
int iMax = m_FifoIndices.GetHighestIndex();
if( iMax < ( m_iMaxViewableLines - 1 ) )
iMax = 0;
//SetScrollRange( SB_VERT, 0, iMax, FALSE );
//SetScrollRange( SB_VERT, 0, 9, FALSE );
SCROLLINFO scrollinfo;
scrollinfo.cbSize = sizeof(SCROLLINFO);
scrollinfo.fMask = SIF_RANGE;
scrollinfo.nMin=0;
scrollinfo.nMax= iMax;
SetScrollInfo(SB_VERT, &scrollinfo, FALSE);
lock.Unlock();
It doesn't take long for the program to hang...maybe about 10 seconds.
When I hit DEBUG->BREAK ALL, I get the output below in the CALL STACK WINDOW.
ntdll.dll!770070f4()
[Frames below may be incorrect and/or missing, no symbols loaded for ntdll.dll]
user32.dll!76c0cde0()
user32.dll!76c018d9()
>
mfc100d.dll!AfxInternalPumpMessage() Line 153 + 0x13 bytes
C++
mfc100d.dll!CWinThread::PumpMessage() Line 900
C++
mfc100d.dll!CWinThread::Run() Line 629 + 0xd bytes
C++
mfc100d.dll!_AfxThreadEntry(void * pParam=0x0022f6a4) Line 122 + 0x13 bytes
C++
msvcr100d.dll!_callthreadstartex() Line 314 + 0xf bytes
C
msvcr100d.dll!_threadstartex(void * ptd=0x004f97c0) Line 297
C
kernel32.dll!762cee1c()
ntdll.dll!770237eb()
ntdll.dll!770237be()
NOTE: If I never make the call to SetScrollInfo(), the program never HANGS.
Sooo....I am trying to determine if there is a fundamental issue with the way the threads are communicating that is causing the issue, or if maybe I have a memory overwrite. It always hangs in ::SetScrollInfo(), no matter what I comment and uncomment. This
makes me think that scroll bat behavior is different in Windows 7 than on XP, but I have not been able to find any documentation about it.
Can anyone provide any insight as to what may be the cause of the program hanging>

It might look like working but it will crash eventually. The windows are thread affine and other thread must never touch other threads windows. Sometimes you might get along but usually it just crashes.
Thread B must use PostMessage ( or SendMessage if suncronous action is require) to thread A's windows to achieve correct updating. Some very basic calls are implemented directly with SendMessage so they are safe to use but then you must individually check
which ones are safe.
Also having multiple SendMessage calls from B to A require rendezvous which might cause other problems ( thread B stalls or program deadlocks, depending on other program structure).
So PostMessage is the way to do it ( or create yourself another inter-thread mechanism, possible but usually too much troble)

Horizontal scroll bar in tabular form with columns freeze

Hi All,
I have a requirement where i have to create a tabular form in which the first three columns should be in freeze mode and it should have a horizontal scroll bar.
with the help of Google i found an example [http://apex.oracle.com/pls/otn/f?p=267:46]
I want the same thing as in the example but with first three columns in freeze mode
But could not find out how to create this column freeze and horizontal scroll bar.
Let me know if you have any idea on this
Thanks in advance,
Ananth

Hi,
It is easy to look at the page source and see what they have done
if you search for var d1 = document.getElementById("d and d1 you see some javascript doing the magic.
Thanks

How do I view the Horizontal Scrolling bar and status bar at the bottom of the screen. I can only see the top menus, toolbars and vertical scroll bar?

Before the most recent upgrade, the bottom horizontal scrolling bar and status bar appeared on my screen. Now since upgrading, I cannot see the. Anyone ideas how to restore them?

If you haven't already, you could force-quit Quicktime by using the menu option from the desktop (finder) and choose Quicktime.
Not sure what you have frozen on the screen, be it a failed movie, or some unusual screen shot. If you can find by date (created) you may be able to look for .mov or quicktime suffix name or other video file content to delete it.
And you may have to restart your computer and perhaps run repair disk permissions from Disk Utility's first aid on the hard disk drive in your computer.
Not sure if all that would help now, but it is something a few days late...!
Good luck & happy computing!

Is there a way to hide the horizontal and vertical scroll bar?

Hi,
I have report with customized page height and width and I am displaying it in the windows forms.
When I am resizing the form wherein the crviewer is dock in, the horizontal and vertical scroll bars appears.
Is there a way for me to suppress the those scrollbars?
Thanks in advance.

Couple of ways I've been able to find info about. E.g.; there is not straight API off os the viewer (CRviewer.ScrollBar = False ).
1) Add Panel control onto the page and add report viewer control into a Panel. Set Scrollbar, width, height property of Panel control.
2) See http://www.dotnetspider.com/forum/266932-Remove-Scrollbar-from-Crystal-report-Viewer.aspx for another idea.
If either of the above works for you, please let us know as I have not tested this yet.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

I run 3.6.10 and the horizontal scroll bar vanishes.

I tried opening the browser in the Safe Mode & restoring the default settings. The horizontal scroll bar reappears until I resize the window. It vanishes again and does not reappear.

It is possible that the screen is too wide or too high and that the scroll bars fall off.
Open the system menu via Alt+Space and see if you can resize that window.
If that works then close Firefox to save that setting.
See also http://kb.mozillazine.org/Resizing_oversize_window
If that didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf

Tableview and horizontal scrollbar

Hi !
I'm having problem on showing horizontal scroll bar in a dynamic tableview.
My situation is:
TabPane
---|___Tab
-------------|_TableView
If i add more columns than i can view i would like to see an horizontal scroll bar.
Right now, extra columns do not care about my will ! :)
Do you have any idea?
thank you!
Edited by: fabsav on 31-mag-2013 16.27

This should happen automatically. For example, if you run the example code in {thread:id=2543320} and add enough columns, the scroll bar appears. It's possible you need to put the table in some other kind of container.

Help with code for inserting horizontal scroll bar in photo gallery in Business Catalyst site?

Hi,
I am using Business Catalyst and Dreamweaver to create a trial site.
I am not sure if this is the correct forum to post this request but anyway I have inserted a photo gallery module at the bottom of the sidebar in the homepage of my test site.
Can anyone advise on whether jquery or any other code can be inserted into the page or module code that will replace the "next" hyperlink below the first 4 photos with a horizontal scroll bar at bottom of the gallery so users can just scroll through all 12 images ?
Kind Regards, Matt.
http://craftime-bs6.businesscatalyst.com/

Alyssa,
Have you tried putting this rule back as it was originally:
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto; /*was 9px*/
    color: #EF9CCF;
    background-color: #FFF;
That is, changing your 9px back to auto.
And giving us a link (as you did) is much better than printing out the code for us! Thanks!
Beth

How to get the Horizontal Scroll Bar for a Table?

Hi All,
As per my requirement, I am displaying several records in a Screen in a Tabular Format. But here I have to show 21 Columns in that table which is too high. I am able to display it but due to it I am getting a Horizontal scroll bar for the whole screen since all the columns are not getting displayed in the normal window screen space. But its looking too odd since once I am scrolling it to right the columns are getting displayed but the above Header Bar and Global buttons are not displaying, they are bound to the normal screen space.
Is there a way to have a Horizontal scroll bar only for that table instead of the entire screen so that on scrolling that bar only the table rows will beshifted ant got displayed?
With Thanks
Kumar Gautam

try this approach.
include a raw text item before and table item.
include the appropriate HTML tags in raw text item to enable horizontal scroll
--Prasanna

Horizontal Scroll Bar

I have this site that I'm practicing on called
Massattack Studios,
it's been a work in progress for a while experimenting with Flash
and Dreamweaver 8.
In internet explorer my scroll bar situation works fine, in
Fire Fox the unwanted horizontal scroll bar appears. At least at
the moment I'm not concerned with other browsers. Can anybody tell
me how to get rid of that little guy?
I'm looking at the Validator and it is very overwealming to
me as a beginner with the code.
Any help would be great, i can post anything you may need to
figure it out, thank you very much!
This is my main index page...
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frameset//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<title>Massattack Studios</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
</head>
<frameset cols="*,650,*" border="0">
<frame src="left.htm" name="left" marginwidth="0"
marginheight="0" scrolling=no>
<frameset rows="100,*,25" border="0">
<frame src="head.htm" name="head" marginwidth="0"
marginheight="0" scrolling=no noresize>
<frame src="home.htm" name="MainFrame" scrolling="yes"
noresize="noresize" marginwidth="0" marginheight="0"
id="MainFrame">
<frame src="footer.htm" name="footer" marginwidth="0"
marginheight="0" scrolling=no noresize>
</frameset>
<frame src="right.htm" name="right" marginwidth="0"
marginheight="0" scrolling=no noresize>
</frameset>
<noframes><body>
</body></noframes>
</html>

In the home.htm file that loads into your main frame, change
the DOCTYPE.
CHANGE:
!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frameset//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd"
TO THIS:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">BTW:
"Bumbing" has no effect in the NNTP forums where most of the
answers come
from and it's just annoying to the web form user who are
patiently waiting
for a response.

My horizontal scroll bar went missing when I maximise the window. How do I fix them?

My horizontal scroll bar went missing when I maximise the window. How do I fix them? I tried everything; such as auto hide the task bar. Even with this, I still can't see the horizontal scroll bar. I even tried the following and I still can't see the horizontal scroll bar.
1) In a new tab, type or paste about:config in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste dom and pause while the list is filtered
(3) Double-click the dom.disable_window_open_feature.scrollbars preference to switch it from false to true. By choosing true, you disable sites from deciding whether there can be scrollbars on a window, and Firefox uses its standard behavior for the page.
If you want to always get other bars, here are the corresponding settings:
Menu Bar: dom.disable_window_open_feature.menubar
Navigation Toolbar: dom.disable_window_open_feature.toolbar
Bookmarks Toolbar: dom.disable_window_open_feature.personalbar
Please help.

Can you post a screen shot?
Taking a Screen shot; '''''Windows > Start >''''' search box '''''> Snipping Tool'''''.
Save the picture(s) to your desktop. Now look at the '''Reply''' box below.
Do you see the button under it that says '''Browse'''? Click it and then select
the screen shot(s) from the desktop.

Vertical/Horizontal Scroll Bars in Numbers 3.0

Just upgraded from Numbers 2.0.1 today. I have a few simple spreadsheets that were converted to 3.0 that now have horizontal and vertical scroll bars that take the page WAY past where the sheet data is. In fact, when I create a blank document, the scroll bars at the bottom and right also want to extend far past the black sheet template data.
Simply put, how do I make these disappear? In the past I just dragged the right bottom corner of the window and they disappeared as it auto detected that the page data stopped at the last cell.
I realize this question is sorta ridiculous, but my OCD has me going nuts because I can't fix this

bump, anyone?
Another issue with this is that after I close the document, it doesn't save the format of the spreadsheet (wide like a 16x9 HDTV / landscape). It looks like it wants to make it a portrait shaped every time the file is opened. Is there no way to save the format?

How to make the knob of a horizontal Scroll Bar stay at right

Hi I need some advise to achieve this:
I have a chart continuously deploying towards the right side (think on an electro cardiogram that is continuously feeding data). All the chart information is kept available inside a JScrollPane. What I want to achieve is:
1. if the horizontal scroll bar knob is at the right end of the scroll bar make the end part of the chart be displayed continuously (view is scrolling to the right, the knob stays at the right end)
2. if the user moves the knob left from the right end freeze the motion and just show the selected portion (meanwhile data keeps being fed and stored but not displayed)
3. when the user decides to drag the knob again to the right end the behavior of point # 1 resumes.
The basic swing structure I'm using for this is the following:
public class Electro extends JPanel {
public Electro() {
JFrame f = new JFrame();
JScrollPane sp = new JScrollPane(this);
f.getContentPane().add(sp);
f.pack();
f.setVisible(true);
I would highly appreciate any feedback from fellow members. Thank you.

hi friend
try this in ur code
public class Electro extends JPanel {
public Electro() {
JFrame f = new JFrame();
JScrollPane sp = new JScrollPane(this);
sp.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
sp.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
f.getContentPane().add(sp);
f.pack();
f.setVisible(true);
i think it will be help full to you
thanks
waiting for reply

TableView and horizontal scroll bar

Similar Messages

Maybe you are looking for