Tabstop in a text field not displayed...

Hello,
i've got following problem:
In an table there's an varchar field. This may contains a tabstop, like this
textTextText123Text(now tabstop ) textText
In Report the tabstop won't be displayed accurate. Maybe it will be displayed just as on space...
is there someone who can help me??
Best regards
Florian

Unlike any text editor, there are no tab stops in the Report Builder, so it just doesn't know where to jump. Based on which behavior you expect from tabs, you may consider creating formula replacing tabs with something more meaningful for the Report Designer, for example, with a number of spaces.

Similar Messages

G/L Account Long Text Field in Display

Dear Sir,
I want G/L Account long text field be displayed along with G/L account number in G/L Account line item display report (FBL3N)
I cheched the layout, the option of G/L account number is available but option of G/L account Long text is not available.
Kindly guide me as to how can I do it?
Regards
Chirag Shah

You must do some development for it.
You can add additional field to FBL*N reports with using BTE exit.
First of all, if you don't use BTE before, you must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product: ZFI
Text: BTE Products for FI Exit
Product active: tick checks from activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure
Define 4 fields.
Component: KUNNR - Component type: KUNNR
Component: NAMED - Component type: NAME1
Component: LIFNR - Component type: LINFR
Component: NAMEK - Component type: NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (Next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process: 00001650
Function Module: ZFI_INTERFACE_00001650
Product: ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
ABAP source example,
TABLES : bseg, kna1, lfa1.
IF sy-tcode = 'FBL3N'.
CLEAR: bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'K'.
IF sy-subrc EQ 0.
    e_postab-lifnr = bseg-lifnr.
    CLEAR: lfa1.
    SELECT SINGLE *
    FROM lfa1
    WHERE lifnr = bseg-lifnr.
    IF sy-subrc EQ 0.
      e_postab-namek = lfa1-name1.
    ENDIF.
ENDIF.
CLEAR : bseg.
SELECT SINGLE *
FROM bseg
WHERE bukrs = i_postab-bukrs
       AND belnr = i_postab-belnr
       AND gjahr = i_postab-gjahr
       AND koart = 'D'.
IF sy-subrc EQ 0.
    e_postab-kunnr = bseg-kunnr.
    CLEAR: kna1.
    SELECT SINGLE *
    FROM kna1
    WHERE kunnr = bseg-kunnr.
    IF sy-subrc EQ 0.
      e_postab-named = kna1-name1.
    ENDIF.
ENDIF.
ENDIF.

Making short text field in Display mode for one particular Purchasing

Hi All,
This is regarding Making the Short text field in Display mode of PR for one Particular Purchasing.. i am giving you a bit elaborate...We are into E-Catalog Procurement.I will do the shopping from the Vendors external catalog and i will return back to SAP.
While doing so, i dont want the user to change the Short Text field. I want that field shud display the Description. When i tried with the Screen Layout settings, it is fully grayed out and i am not able to see the Description of the Material. Is there any other options to get this enabled?. Please advice me on this settings to be done. Thanks in Advance.
With Regards,
Saakithyan

Hi
Define a Field selection key (new not the one which is assigned to document type) which makes short text editable in screen layout config. and assign it to functional authorization value in t.code OMET. (it should be numeric). Then assign that functional authorization value in user master SU01 for users with parameter id EFB.
Then it will work
Regards
Antony

Text Fields Not Showing in Design or Live View

Hello Everyone,
I have run into a problem trying to create a simple contact form through Dreamweaver CS6. I have two text fields for Name & Email, and 1 text area for Comments. The issue I am running into is that the text fields are not showing in Design or Live view. I have set-up all variables required for the server for the form to work... but that should not have any effect on the text field showing... I tried uploading my contact page with the same result of no text fields showing...
What is really laughable is that the "text area" I placed in my form for Comments shows up in Design & Live view just fine. I am thinking that I am missing something, but just do not know what exactly. The form is styled through CSS.
Here is the form code:
     <div id="CRDForm">
       <form action="http://www.sweetformimi.com/formmail/formmail.php" method="post" enctype="application/x-www-form-urlencoded" name="contact" target="_self" id="contact">
    <input type="hidden" name="env_report" value="REMOTE_HOST,REMOTE_ADDR,HTTP_USER_AGENT,AUTH_TYPE,REMOTE_USER">
    <input type="hidden" name="recipients" value="[email protected]" />
    <input type="hidden" name="subject" value="Contact Form" />
         <label><p>Your Full Name
           <input name="Name" type="text" id="Name" size="40" /></p>
         </label>
         <label><p>Email
         <input name="email" type="text" accesskey="2" tabindex="2" title="Email" value="Email"></p>
         </label>
         <label>Comments<br />
         <textarea name="comments" cols="40" rows="10" accesskey="3" tabindex="3" title="Comments"></textarea>
         </label>
         <input name="submit" type="submit" accesskey="4" tabindex="4" title="submit" value="submit">
       </form>
    </div>
Are there other variables I should be thinking about in the rest of my site? I am using a fluid grid layout. I have CSS for desktop, tablet, and phone devices. I also have a primary CSS file that imports all three. The sites structure was done by using <header>, <article>, <footer>, and of course <div> tags.
Has anyone ever experienced the "text fields" not showing up before? Is it a simple fix as reinstalling Dreamweaver CS6? Finally, another thing I should mention is that I did have a previous version of Dreamweaver on my comp, which was CS3. I did not uninstall that before installing the newer version. I assumed (and I could be wrong here) that it would automatically replace the older version.
I apoligize for it being long winded, but I am looking for some help on this issue...
Thank You

Hey thank you osgood for the reply!
When I look at code for long hours it sort of blurs together, and I miss things... I think that happens to the most of us
Ya I found what was blocking my text fields in my desktop.css
I primarily work through code view, and currently working on quite a few projects kind of makes your eyes miss the small errors.
Thanks again!

In PO print text is not displaying?

Hi all,
IN PO printout text which i maintained in PO item text is not displaying, how to enable the same?
regards,
Sanjana

You have to make changes in the print program to pick the same.
Texts are not stored in any table directly. They are stored in STXH Header texts and STXL Item texts in an encrypted formats. You have to use Function module FM READ_TEXT to read the same.
Please contact your programmer.

Text does not display in address bar or any windows I open

Text does not display when typing in address bar. When I open a window (eg Edit > Preferences) no text is displayed within that either.
Problem has persisted through Ubuntu 12.04 (possibly 11.10) to 13.04. Has also remained after re-installs, both through use of Software Centre, and through Terminal commands, and after running purge of all firefox content.
Running Firefox as root using gksu command also doesnt help.

Have finally solved,
1st checked default system fonts available using unity-tweak
Then went to ~.mozilla/firefox and found prefs.js file, deleted everything to do with fonts and families, saved and restarted.
The odd thing is how this file persisted despite removing and purging firefox.

Iphone 4s has anyone had a problen with text messages not displaying

has anyway had a problem with text messages not displaying?

helplessmom,
We want to make sure all of your messages show up for you! What issues are you having with them? Do they come to the phone at all? Is it only messages from certain people having issues or all?
AndrewT_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Button Setting Variable - Text Field Not Updating

Hi,
I am working with Acrobat 9 Pro on Windows.
I am unable to make the following work: When the user clicks a Button, a Text Field appears with the text associated with the Button clicked. I have tried accomplishing this with a variable declared in the Document JavaScripts, buttons setting the value of the variable, and a Text Field containing a Custom Calculation Script that returns the text associated with the value of the variable.
Everything works - except the Text Field doesn't return the text associated with the value of the variable. I have an app.alert (for now) in the button scripts so I can see if the variable has the correct value - and it does - but when the Text Field appears - the text never changes.
What I have observed: if I go back into the Custom Calculation Script of the Text Field and do nothing, go back out, go to Preview, and click on a Button, the text updates to the previous variable value (not the Button variable value I just clicked).
So - I think - the Custom Calculation Script isn't seeing the new variable "on the fly". Even though the app.alerts are. I don't think this is a Field Calculation Order problem. But maybe it is. And this is where my brain power ends. Any suggestions would be greatly appreciated. Thank you.
I have this in the Document JavaScripts:
var ITrig = 1;
I have three Buttons (want to have more) that will set the ITrig variable.
Here is what I have in one Button:
var Inpopup = this.getField("PartASectionIIInstructions")
ITrig = 2;
app.alert(ITrig);
if (Inpopup.display == display.hidden) {
Inpopup.display = display.visible
Inpopup.setFocus();
} else {
Inpopup.display = display.hidden;
I have this in the PartASectionIIInstructions Text Field in the Custom Calculation Script:
if (ITrig == 2) {
event.value = "#2";
else if (ITrig == 3) {
event.value = "#3";
else if (ITrig == 4) {
event.value = "#4";

Thank you. I had tried something like that earlier - without success. That is why I went to the calculation script. So - I went back to the "Acrobat Forms - JavaScript Object Specification" looking for an answer. It finally sunk in I was guilty of this:
var Inpopup = this.getField("PartASectionIIInstructions").value
Inpopup = "#3"
When I should have been doing this:
var Inpopup = this.getField("PartASectionIIInstructions")
Inpopup.value = "#3"

How can I get text from a text field and display it in an alert?

Hello! I am BRAND NEW to Objective-C and Xcode and iOS, so PLEASE be forgiving of what is going to be a stupid question. I have a text field. I want to enter some text, click "return", and see my text in an alert. It doesn't serve any useful purpose, but this is how I learn. So far, I am unsuccessful. Here's my function from my HelloEarthViewController.m file:
-(IBAction)showInputMessageUITextField *)textField
if ([textField.text isEqualToString:@""])
    return;
UIAlertView *helloEarthInputAlert = [[UIAlertView alloc]
                                     initWithTitle:@"Name!" message:[NSString stringWithFormat:@"Message: %@", textField.text]
                                     delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil];
// Display this message.
[helloEarthInputAlert show];
Then I go option+click the text field and drag it to File's Owner and connect it to "showInputMessage:" Then I run it and the build succeeds, but nothing happens when I click my "return" button on the iPhone simulator.
What have I missed? Where have I gone wrong?

Okay, here's where I am. I have this in my view controller .h file:
@interface HelloEarthViewController : UIViewController <UITextFieldDelegate>
    IBOutlet UITextField *textFieldTest;
@end
And this in my view controller .m file:
-(IBAction)showInputMessage
    if ([textFieldTest.text isEqualToString:@""])
        return;
    UIAlertView *helloEarthInputAlert = [[UIAlertView alloc]
                                         initWithTitle:@"Name!" message:[NSString stringWithFormat:@"Message: %@", textFieldTest.text]
                                         delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil];
    // Display this message.
    [helloEarthInputAlert show];
And I have connected the text field to showInputMessage. When I hit "return", however, I still get nothing.
Is an "action button" a real button? From my limited understanding, the alert should launch when I click "return" since showInputMessage is attached to Editing Did End on the text field.
Thanks for the help. The transition from writing C# for web applications to writing Objective-C for iOS applications is not going as smoothly as I'd anticipated.

Field not displayed completely in the Query

Hi friends,
I have a Field in a query. The info object for this field is a characteristic and has length 40. Data is getting extracted completely in DSO. But Query is not displaying complete field.
For example in DSO the field has "Catering/Food, Non-Product (Overhd Cost)" but the query is displaying "Catering/Food, Non-P"
Some inputs please!
Thanks & Regards,
Virinchi.

Hi,
Goto BW system, Maintain that info object screen, in Business explorer tab > bex description> select as long text and then reactivate.
Same thing to be done in query designer.
Then see ur report in analyser, and then lemme know,
thanks

Mail merge fields not displaying properly - Dollar signs and percentages

Hi folks,
I don't know much about mail merging, so I have a question. I have most things working on my merge, but need help with a couple of minor items (I hope). I have an Excel 2010 spreadsheet that we use for merging to a Word 2010 document.
It has various fields such as name, address, city, etc. It also has a field for a dollar amount formatted to two decimal places and showing the $ sign in Excel (ex. $67,000.00), but when it gets merged into the Word document, it displays as 67000.
It doesn't pull the $ nor the decimal point and cents.
I also have the same thing with a percentage (Ex. 6.00%), displays in the Word document as .006.
I think I have everything else working, but can't figure out how to format these items in the Word document to display properly. Any advice?
Mike

If you insert the fields
{ MERGEFIELD Total_NB_Premium_away_from_Plan }
and
{ MERGEFIELD Total_Premium_of_Team_Sales_Target }
directly in your mail merge main document, outside an IF field, not nested in an { = } field, with no formatting switches, what results do you see?
Word will only apply a numeric format to things that it decides are numeric (broadly speaking, that includes numeric and currency amounts that it can recognise). It will leave anything else unformatted. So if you have something that looks a bit like a number
like "$-164,209.00", the chances are that Word will leave it exactly as it is.
When Word does not recognise something as being a number or a valid numeric expression, it will generally display one error or another when you try to put it in an { = } field. So, e.g.
{ =$-164,209.00 } would give you the syntax error that you are seeing. (Assuming "$" is set up as the currency symbol in your COntrol Panel's regional options. If the regional currency symbol was £, you would see a different syntax error.)
The problem in this case probably originates in something that has happened in Excel. Normally, things that are numeric/currency in Excel come through as things that Word treats as numeric. But if for example, someone has entered a number formatted as text
in a column that has texts rather than numbers above it, Word may receive something that it does not think is numeric. You may have to fix your sheet before Word will "see" the numbers correctly.
When you have got to the point where WOrd sees the numbers correctly, you should be able to use
{ MERGEFIELD
Total_NB_Premium_away_from_Plan} \#$,0.00 }
(and the negative numbering formats if you want) without nesting the { MERGEFIELD } inside an { = }
Peter Jamieson

Text area not displaying all rows

I have a SQL query as the source for a text field that returns several rows. However, the text area (display as text (do not save state)) only displays the data from the first row in the query. How do I get the rest as well?

SQL as source assumes you will return exactly one value. If you return more, it only takes the first. Instead, use a function body and return a concatenation of what you want:
declare
l_retval varchar2(32767);
cursor c1 is select v1 from t ...
begin
for c1rec in c1 loop
l_retval := l_retval || chr(10) || chr(13) || c1rec.v1;
end loop;
return l_retval;
end;

Master page fields not displaying data from XML file

Hi,
For some reason if I a add a field on the master page, when previewed it does not display the xml data assigned to the field.
I have a work around, but it looks messy and would prefer to resolve the problem correctly.
My work around is to create another field with the same name in the "Design view" layout, and change the presence to invisible. I don't even have to link it to the xml data, simply select Global as the default binding.
Any ideas what I have done wrong, I assume it's a simple setting somewhere but I have no idea what it is.
Thanks
Russell

If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

Appended Comments Fields Not displaying in Open with Access SharePoint 2013

i have a Issues List which is actively been used as a helpdesk ticketing system amongst one of the groups within my organization. Within that list we have Comments Field( Multiple Line Of text) and its set to Append changes to existing text.
One of the Office Admins uses the "Open with Access" Feature of that list to open the list in the access view and do some reporting. We are able to open the list in the Access, but Comments Field is not displaying the appended comments in that
Comments field we talked about above.
Is there something, i need to tunr on to activate that or is it not supported?
Your insights would be helpful

Hi Octopus,
I understand that you want to display the Appended changes to the multiple line of text field when using "Open with Access".
Per my knowledge, the “Append change to existing text” feature is the feature of the item view.
It calls the “Comments” data from the versions and display them on the item view. It is just a “view".
The original data of the versions does not locate in the list items but in the version files.
The contents of the “Comments” column are the latest update contents of this column exist in this list.
So, the contents in the versions will not be displayed in Access when using Open with Access, even if using Export to Excel.
It is by design.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

Tabstop in a text field not displayed...

Similar Messages

Maybe you are looking for