Takagi-Sugeno Fuzzy system in Labview, Matlab

Hello! I am trying to make a neuro-fuzzy controller for an inverted pendulum in Labview. For this I've created a ANSIF neural network in matlab, witch is improving a Takagi-Sugeno .fis file (the fuzzy controller in matlab). I want to put this .fis file in labview. Can I do that with matlab script?
What other possibilities I have for creating a neural network in labview?.. I mean, for a neuro-fuzzy controller..
Thank you for any idea!
Emilia

Hi Emilia,
Please have a look at this post. To do it graphically, it appears that Mathscript is the only method--the other option is to call Matlab from the command line as suggested.
Ipshita C.
National Instruments
Applications Engineer

Similar Messages

Fuzzy System Designer in Labview 8.5

I am using LabView 8.5. My project requires me to use fuzzy logic. In the Labview manual, stated that, I need to click to Tools > Control Design and Simulation > Fuzzy System Designer to launch the Fuzzy System Designer. However, in LabView 8.5, I follwed the steps but it did not lead to Fuzzy System Designer as the intruction mentioned in the manual. How to find it?

In addition, I strongly recommend to update your LabVIEW version to 2009 or later. We did a major improvement to the toolkit at that version.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Matlab fuzzy logic in Labview

I'm working with the fuzzy logic toolbox from matlab. I created a .fis file with some rules from the fuzzy editor in the fuzzy logic toolbox from matlab, wich I want to run in labview, with the matlab script. How can load the fis file? I tried with the examples attached, but it didn't work.
Attachments:
fuzzy_test.zip ‏7 KB

I have also noticed you have posted on another thread with the same issue I have added a link just to tie them together
http://forums.ni.com/ni/board/message?board.id=170&message.id=180182&jump=true

Fuzzy system from simulink to labview

Hey all, hope you are well.
I have a developed fuzzy system in simulink, how would I go about transfering this over to labview? If anyone has any help or developed a model that can do this. Any advice is well recieved.
regards
Alim Guy

Hi Alim,
This can be achieved using the Simulation Interface Toolkit, which can be purchased from this URL, which allows you to directly interact with models developed in Simulink. This toolkit will import the developed files into LabVIEW. In terms of researching Fuzzy Systems created within LabVIEW, if you have the Fuzzy Logic Toolkit, you can go to the NI Example Finder (LabVIEW > Help > Find Examples...) and search for the keyword 'Fuzzy' you can view Fuzzy Systems developed purely in LabVIEW. You can learn in depth about Fuzzy Logic Toolkit here to see if these tools suit your specific requirements.
In terms of the ease of implementation, it really depends on what you're after. It's not so much what process is easiest, but what you are suits your current process of development. If you're used to developing systems in Simulink and it's the standard at your workplace, then it's probably more suitable to implement your Fuzzy System through the Simulation Interface Toolkit; there are some extra steps required when importing the data in terms of referencing the variables appropriately in LabVIEW but it's not a lot of extra work. If you're interested in developing and implementing your systems entirely from the LabVIEW environment, it will be worth using the Fuzzy Logic Toolkit.
Regards,
Alex Thomas, University of Manchester School of EEE LabVIEW Ambassador (CLAD)

Systems Engineer(LabVIEW)

Excellent opportunity for Systems Engineer(LabVIEW)
Locationheffield
Salary:£30 to £37k per annum
Austin Consultants are a National Instruments Alliance Partner and have been the UKs highest certified LabVIEW Consultants for three of the last four years. We are an elite team of LabVIEW Engineering professionals and software programmers working across multiple industries with a passion for problem solving and being at the forefront of technology.
We are currently looking for a LabVIEW Systems Engineer to join our dynamic and expanding team in our northern office based in the heart of Sheffield . As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architectures primarily in the LabVIEW Programming Language and on the National Instruments Hardware Platforms.
Key Skills
Qualifications & Requirements:
◦ Minimum of 3 continuous year’s practical experience in instrumentation & control, industrial automation and ATE is required.
◦ Minimum 2.1 honours degree in engineering or science related field,
◦ Minimum of LabVIEW qualification of Certified LabVIEW Developer or equivalent.
◦ Firm knowledge and experience of National Instruments embedded systems, including LabVIEW FPGA and LabVIEW Real Time.
◦ Understanding and practical experience of object oriented principles.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI,
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills
◦ Excellent communication skill
◦ A proactive/can do attitude
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license and be flexible to travel throughout UK.
Key Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Must be available and happy to travel and work on customer sites around the UK.
Kindly send us your updated CV or call us for confidential chat regarding the opportunity.
Mathi Narayanaswamy
Resource Consultant
(LabVIEW, TestStand, VeriStand, VISION and other NI technologies)
Austin Resourcing (Division of Austin Consultants, National instruments Silver Alliance Partner)
Studio 41, Clink Street Studios
Clink Street
London
SE1 9DG
Tel: 0800 772 0795
Mobile: 07809344621
Email:[email protected]
www.austinresourcing.co.uk
LinkedIn: uk.linkedin.com/in/austinresourcing
Twitter: www.twitter.com/austinrecruit
Austin Consultants are the highest certified LabVIEW Consultancy in the UK. Visit them at www.AustinConsultants.co.uk
Come and Visit Austin Resourcing's Stand at NI Day on Nov 4th ,2014

Hello Fred,
Can you please tell me if Indian citizen can apply for this position. I have a graduate degree from US and have the work permit to work anywhere in US. So can I apply?
Thank you.
-Ujwal

'Fuzzy System Designer' problem

After I completed set up the 'Fuzzy System Designer' (2 inputs and 1 output). How can I use it in vi program? I find it can save as .fc (custom pattern) file in 'Fuzzy Logic Controller Design'. But how to use the .fc file?

Hi,
To use the Fuzzy Logic file, you need to use the "FL Load Fuzzy Controller" to load the file and use the "FL Fuzzy Controller" VI to execute the controller.
The best way to see how to use it is accessing the manual and examples that ship with LabVIEW. You can access both function by going to "Help>>Search LabVIEW Help..." and go to "LabVIEW Modules and Toolkits" Options, browse the content for PID and Fuzzy Logic Toolkit. To access the example finder, go to "Help>>Find Examples.." and under Modules and Toolkits, find PID and Fuzzy Logic and open the examples.
Hope this helps!
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Fuzzy system designer

Hi,
Is it possible to start "Fuzzy system designer" from a .vi so that the .fs file is loaded?
I would like to tune my rules and memberships. Now I must look for Tools -> Control... -> Fuzzy System Designer, then wait for it to load. After that I must find the right .fs file. It could be more easily to use if the operation is: press button which stops fuzzy controller, starts/change control to Fuzzy system designer. After that I can edit rules etc, save the system. Back to my .vi. Press button to load new fuzzy system.
Thanks in advance!
Seppo Rantala

To change parameters of Fuzzy WHILE the Fuzzy Controller, you have two options:
1. You need to use the programmatic API (LabVIEW 2010 and later) that allow you to change any parameter while the VI is running. Please look at documentation and examples "examples\control\fuzzy\Dynamic greenhouse controller\FuzzyEx Dynamic Fuzzy Controller for a greenhouse.vi" to see how to use the API.
2. You can automate the process you described below by place the load VI "inside the loop" and use a case structure to reload the controller after you modify the parameters with the existent tool. Notice that you do not need to stop the Fuzzy System Designer to operate your VI and you can modify the controller, save to a file and then, you can "reload" the controller, which will update all the parameters for you.
Hope this helps.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Can I find the OS of a remote system using LabVIEW?

I wish to be able to start an application on a remote system using
LabVIEW. To do this, I need to know what the OS of the remote system is
(Windows, Linux, etc). I can ask the user to provide this information
for me, but is there any way I can get LabVIEW to automatically
retrieve this information? I know I can use the application node with
the OS sub-section to get this information for the local machine... is
there any way I can remotely run this? Would VI server allow me to run
this, if I turned it into a VI, on the remote system such that I could
retrieve this information for the remote system? Or is there a neater
solution I'm missing?
Cheers,
M.J.

Heya... many thanks for the suggestion(s).
The problem with my case is there's any number of users on the network
that might be using this, and it could be running on a Windows or Linux
box, depending on user circumstances, so trying to get a VI Starter
type application put into the start-up of all machines just in case is
a) overkill & b) more than I want to bite off So basically I
need to have the VI running on the machine in order to use VI server is
what I'm hearing & reading from the help, which essentially my idea
of dynamically firing off labview & loading/running any VI on the
remote system just ain't possible... hmmmn.
Back to the drawing board then, it looks like...
Cheers,
M.J.

Matlab syntax errors are not caught and reported when code is executed in a LabVIEW Matlab script node

I want to be able to catch errors that occur during the execution of Matlab code in a LabVIEW Matlab script node. According to my understanding of the documentation, errors of this type should be available at the "error out" signal point on the Matlab script node. I have noticed that even deliberately generating matlab syntax errors will not produce an error output. See the attached vi for an example.
Attachments:
matlab.vi ‏13 KB

I ran your example VI and the is what I got in the Error Out cluster:
"Code 1050
Error occured while executing script. Error message from server: ??? This is an error
. in matlab[1].vi"
If you are generating custom error messages in Matlab I would suggest passing them back to LabVIEW through output variables in the script node.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Test System Engineer / LabVIEW Developer

As a member of the Nexjen Systems team, the Test System Engineer / LabVIEW Developer performs engineering design, software development and hardware specification for custom test & measurement systems.
Nexjen Systems offers a challenging environment where you can:
Develop your Engineering, Design and Software Development skills.
Refine your communication skills through direct client interaction.
Take responsibility for highly technical projects, with mentoring from experienced engineers.
Add significant value to clients’ product development and engineering efforts.
Nexjen Systems is a premier integrator of LabVIEW-based, automated test & measurement systems. We pride ourselves on providing a very high level of technical value to our clients through a range of services focused on test system engineering, construction and deployment. Nexjen Systems is located in Charlotte, our clients are located around the world. Learn more at www.nexjen.com .
Position Requirements
Engineering Degree (Electrical, Computer or Mechanical preferably).
3-5 Years LabVIEW and/or TestStand Development Experience.
3-5 Years Automated Test Equipment Design or Test Engineering Experience.
Desire to grow as an Engineer/Developer in a challenging technical environment.
PLEASE EMAIL RESUME' TO [email protected]

It would appear at their headquarters in Charlotte, North Carolina, USA
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Research Design Engineer - LabVIEW/MATLAB Programmer -Boston, Massachusetts

Research Design Engineer - LabVIEW/MATLAB Programmer
The Eaton-Peabody Laboratory seeks an experienced programmer to design and write LabVIEW and MATLAB software to control stimulus generation, data acquisition and response analysis for a range of cutting-edge biomedical research projects. The successful candidate will join an existing team of hardware and software engineers within a multidisciplinary research laboratory, located at the Massachusetts Eye and Ear Infirmary, comprising 21 NIH-funded investigators studying a variety of aspects of hearing and deafness. To see current research projects here at the Eaton-Peabody Laboratory, go to our website: http://www.masseyeandear.org/research/ent/eaton-peabody/.
Minimum Qualifications:
BA/BS in Math, Computer Science or equivalent
demonstrated expertise in MATLAB, LabVIEW or C++
demonstrated ability to work and communicate effectively with technical and non-technical colleagues
Additional Qualifications:
experience with software control of digital and analog I/O boards
experience with scientific programming
Send a cover letter, resume, salary requirements and contact information for three references to:
[email protected]

Labview Programmer

ECG system on Labview

Hi
Please any one desing ECG monitoring system on LABVIEW for me i want 3 leads ECG monitoring system.
i want to take input by BLUETOOTH into PC.iam also sending u a circuit digram of ECG circuit please give output through BLUETOOTH and take input on other side by BLUETOOTH.please please please i search alot of teachers to teach me how to use LABVIEW but i didnt find any teacher so please help me out my ID are syja786 at yahoo and hotmail same please reply me iam waiting for your reply. Check circuit digram at http://geocities.com/syja786/

Actually, NI offers Labview basic courses in many areas of the world. See this thread.
The course is well worth the investment.
Or alternatively, try breaking down the problem into smaller pieces and ask advice on this forum along the way.
It is unlikely that someone will do a complete design and coding for you on this forum.
Can you at least give a bit of background explanation / description of what you are trying to achieve and why?
JLV

Fuzzy system. Correction of rules.

Hi all! Tell me, I have a fuzzy logic system with 6 inputs and one output. How to draw up rules and to adjust the system so that the resulting index was changed in the range from 0 to 10. Under the current rules, it varies on average from 3 min to max 8.6. that is the scale of values is not complete, although output membership function changes from 0 to 10. In what may be the case.
Attachments:
Fuzzy system.zip ‏38 KB

Hello,
This is a common behavior for Mamdani based Fuzzy controllers, where the defuzzification methods usually use the center or maximum value of a membership function to process the output, and these values maybe never touch the border of your universe of interest.
A workaround would be just creating membership functions in a extended range, so the maximum or minimal outputs will be whitin your desired range. For example, instead of using 0___10 range, try -2___12 so the defuzzification can reach your 0 or 10.
You can try first to mirror your first and last membership functions and see the result, and adjust them as needed.
Hope this helps, best wishes.

Current execution system of labview 8.20

What is the Current execution system of labview 8.20

Hi,
I presume you mean how LabVIEW executes the code in your block diagram? You can see this happen using the "Highlight Execution" button located next to the run, run continuously and abort buttons.
Thanks,
CLA | LabVIEW 7.1... 2013
www.renishaw.com

Error 1430 occurred at Open/Create/Replace File in NI_Fuzzy_Logic_API.lvlib:FL Load Fuzzy System.vi- Untitled 3 Possible reason(s): LabVIEW: The path is empty or relative. You must use an absolute path. Not A Path how can i copy it in new vi plz help

when i am copy the vi that is in find example>fuzzy>fuzzyEx with pi control the follwing error occuring
'error 1430 occured at open/create/replacefile in NI Fuzzy logic API.LVLIB FL LOAD FUZZY SYTEM.vi
untitel 3 possible reason the pat is empty or relative you must se use an absolute patth <not apath>
plz help me i only want that i can copy this vi in new vi but when i do so the above error occur and fuzzy logic cotroller is highlited

Hello Nofil,
This is probably happening because you have made a copy of the VI without changing the name/ location on the disc. I have saved a copy of the VI for you, it is in LabVIEW 2010 SP1, please ask if you want this in a previous version.
Regards
Andrew George @ NI UK
Attachments:
Fuzzy Tanks with PI.vi ‏31 KB

Takagi-Sugeno Fuzzy system in Labview, Matlab

Similar Messages

Maybe you are looking for