Taking 4ever to update from 3.2 to 5.0.

It's been connected for over 4 hrs. Have a 1st Gen ipad with 64 meg. Just got it on Monday and it has nothing on it. Nothing! How long do I need to wait? Should I hit the cancel button and start over? Any help would be great!!
Thanks in advance
Mrsmicdee

Hi
<b>Have you gone through the follwoing two SAP OSS Notes -></b>
Note 928881 BBP_XPRA_ORGEH_TO_VENDOR_GROUP: Problem w/ check mode 9 (2)
Note 917536 BBP_XPRA_ORGEH_TO_VENDOR_GROUP: Problem with check mode 9
<b>Also, Please see the following links, which deal with the same issue -></b>
Re: SRM 5.0 Exception E:BBP_BUPA:034 -Organizational unit in SUS
Re: Vendor Replication in SUS scenario
Vendor Node still in Org Structure after BBP_XPRA_ORGEH_TO_VENDOR_GROUP
Re: Errors while executing BBP_XPRA_ORGEH_TO_VENDOR_GROUP
Re: Vendor Replication
Re: SRM organization plan...
Deletion of Vendors not possible in SRM server
Re: Vendor Replication - Org Units
Hope this will solve the problem.
Do let me know.
Regards
- Atul

Similar Messages

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

Why is a fillable, savable form on iPad taking 4ever to move from field to field when data entered?

How can I get my fillable, savable, calculated fields PDF form to move from field to field more quickly when entering data on an iPad/iPhone/handheld using the Adobe Reader app? I have tried everything I can find to reduce the file size, but to no avail. It is taking about 8-10 seconds to move from field to field after entering data. There is no problem filling in the form on a Mac laptop/desktop in regards to the lagtime. I haven't tried the form on any Windows OS product.
I suspect it has to do with the javascript, but I've tested other fill-in savable forms on my iPad (such as employer tax forms from IRS and State) and they work fine and move quickly. However, there are quite a lot of fields on this particular form I've created (270 to be exact - it is an order form for clothing with many size choices for each item), so perhaps it has to do with that as well. I came to this conclusion after creating one page of the form and it only took 3-4 seconds to move from field to field when entering data, but when I created the second page it went up to the 8-10 seconds.
Any suggestions would be greatly appreciated. I am using Adobe Acrobat X 10.1.7.27 for/on iMac 10.7.5 2.5 GHZ Intel Core i5.

I have this issue as well. I created an expense tracking form using the Acrobat X basic calculation tool (not javascripts) and it takes 10 - 15 seconds to move to the next field on an iPad or Android device. On my PC it works great. HELP!
I also tried using a trial version of Acrobat XI with the same result.

WSUS SERVER TAKING UPDATES FROM DIFFERENT DOMAIN

Dear Concern
We have oberved from the logs that WSUS server is taking updates from the sites which is Non-Microsoft .
Few updates ar being feteched from the Akamai platform kindly confirm if the microsoft is providing updates from Akamai cloud.
This is security concern for us .
Regards

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

I am getting browser needs updating from various web sites since getting 10.0 update.sites are taking forever to load.I have to click stop then reload to get them to work.

I have had web site page loading problems since I started beta Firefox.I took the update from beta 9 to 10.0 and since then I am getting a message from various web sites that my browser needs to be updated for site to work with links to all browser update pages including Firefox.Sony premium services support is one of the pages I got the update needed notice.

Hi,
You can try using the [https://addons.mozilla.org/en-US/firefox/addon/user-agent-switcher/ User Agent Switcher] and create a generic entry like '''Mozilla/5.0 (Windows NT 6.1; rv:9.0.1) Gecko/20100101 Firefox/9.0.1''' and switch to this on problem sites.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

Microsoft Security Essentials not taking definition updates from WSUS Server.

Hi Experts,
I have a WSUS server installed on network on which MSE definition updates are installed, but the MSE on the client computer is not getting updates from it.
When I click the update button it gives me error "Virus and spyware definitions couldn't be updated".
The error code i am getting is 0x80244018. The definition updates couldn't be installed please try again later.
I also have TMG on my network as a default gateway, I want to update MSE from WSUS not from microsoft update.
Do I have to change rules....??? or any suggesstions that how MSE can be automatically updated from WSUS, the WSUS setting is saved into a GROUP Policy and applied....
Please advice......

The error code i am getting is 0x80244018.
This is an HTTP 403 error, which is generally (but not always) indicative of a proxy server interfering with the download. Assuming this is happening when the client is trying to get Definition Updates from Microsoft during the daily scan, this error will
likely go away once you properly set up WSUS to provide the definition updates.
I want to update MSE from WSUS not from microsoft update.
To do this, you need the following:
The Definition Updates classification must be configured for synchronization.
An Automatic Approval rule that approves the Definition Updates classification for the appropriate target group(s) must be configured and enabled.
The policy setting Allow Automatic Updates immediate installation must be ENABLED.
Your WSUS server should be configured to synchronize multiple times per day (at least 2).
Your clients should be configured with a shorter Detection Frequency (8 hours is ideal).
With the above configured, the clients will check the WSUS server 3x-4x per day, find the latest available Definition Update, download it and install it immediately.
Note, however, that if the client fails to download and install Definition Updates, MSE will continue to do a check, and attempt to update the Definition Updates during the daily scan. If your TMG blocks the client's Internet access, then they
will continue to log HTTP 403 errors when this definition update attempt is executed. (This is why you configure multiple syncs and scans per day -- so the client *never* has to go to Microsoft to get the current definition updates.)
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Updates from Apple result in white screen, have to reinstall thru time machine, 4hrs.

I have a Mac 21.5, OS X Yosemite 10.10.2
Processor: 3.06 GHz; intel Core i3
Memory 4 GB 1333MHz DDR3
If I do an update from Apple I end up with the White Screen of Death. I restore thru Time Machine and this takes about 4hrs. I have to turn off, unplug everything then plug everything back in, power up while holding "shift" "command" "r" and "p", keeping my finger on power button till I get an option screen with 4 choices. I've found, restore with Time Machine the best choice. It takes two people to hold the keys and power up. I don't know why this happens, hoping for some ideas. There has to be an easier and faster way to restore. I currently have an update pending, 10.10.3, I just did 10.10.2 Saturday (04-11-15) and had to go through all of the above to get update and eliminate "white screen" to restore.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

After installing 3 updates from "software update app" today (june,11th) my MacBook Pro doesn't initialize anymore. Why this is happening? And how do i solve this issue?

Hello Mac Friends!
Need some help here!
After installing 3 updates from the "software update" app today (June, 11th) my macbook doesn' t initialize anymore.
Is there someone who can help me fix this issue?
Why this is happening?
How can i fix it?
Wainting some feedback...

Two places to start with that would have been better:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovery Mode
http://support.apple.com/kb/HT4718
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.htmlhttp://macperformanceguide.com/Mac-HowToClone.htmlhttp://www.macupdate.com/app/mac/7032/carbon-copy-cloner
If you have backups, if you can and saved your ML installer, you can start over.
Prevention and taking a more proactive approach to system maintenance and repair, rather than fixiing a problem (likely pre-existing?) format the drive or partition and reinstall 10.8.1 and restore from backups.
Never had any issues? freezing? apps crashing before?

I cannot update from OS 10.9.4 to 10.9.5. I get a message saying: File couldn't be installed error (513). I have configured my OS so that I have read and write permission followed by system with read and writ permission. Can someone help me? Thanks.

I cannot update from OS X 10.9.4 t0 10.9.5> Whenever I try I get the following message: File couldn't be installed error (513) and something about not having the proper permission. Under the Macintosh HD sharing and permissions settings I have customized the settings so that (Me) has read and write permission followed by the system with read and write permission, wheel and everyone have Read permissions.
I have no problems updating apps such as Adobe CC or iTunes but cannot update the operating system, can someone help me? Thanks.

1. Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, go to Step 2.
If there's no change after taking this step, continue.
2. Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "folders" selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Iphone 5 is updated from ios6.1.3 to ios 7.0.2, then use the machine to slow down.

Iphone 5 is updated from ios6.1.3 to ios 7.0.2, then use the machine to slow down.

I am in the same predicament...any resolve? Other than possibly taking it into the shop?

Updating from 10.4.7 to 10.4.9 - been trying ALL day!

Hi there. I decided last night to reinstall my iMac from the setup discs as I was having a few glitches (not wanting to shut down, having to keep forcing apps to quit etc). All went well, til I tried to upload my iLife '08 disc this morning. I discovered my installation discs were from Feb so i'm currently running on 10.4.7 - iLife 08, need a minimum of 10.4.9. I've tried doing via system preferences, software update, but just keeps getting stuck on locating software. so i've then tried downloading direct from the apple downloads site. still no joy. do i need to install 10.4.8, then 10.4.9, then 10.4.10 to get the most uptodate version? Doesn't seem right, and now the imac is running drastically slower on the internet too. taking an estimated 4 hours to download 250mb (my internet connection is slow anyway only on a 2meg connection, but still). Any help on the quickest way to get uptodate? And then to top it off, at lunch I had the same problem. Refused to shutdown when I tried, all icons disappeared off screen, but i was left with the blue background. I feel like I'm back in the pc days, and just want to curl up with my MacBook and forget about this iMac !!! Any advice gratefully appreciated.

i'm really surprised if i have to download previous versions to get to 10.4.10
You don't, that is what the 10.4.10 Combo updater is for.
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

I updated from 2.0 to 3.1 - Delete old drivers?

Hello,
I updated from 2.0 to 2.1 to 3.0 to 3.1 as the updates came out.
I recently went to "Change/Remove programs" on my Windows system and noticed that all of the old drivers (4 copies of each driver), the newest to the oldest, are all there. Is it alright to remove the older drivers, as they are likely just taking up space. Or should I leave them? Are the updates just amendments to the previous versions?
Thanks for your help.

any help?

Taking time in updating the dml form

Hi friends
i have made a dml form and that form is updating one of my table. there is a report on basis of that from where one edit button is there. Once i am clicking the edit button it is redirecting me to the form of that record to edit the fields value. when i am trying to edit the field value it is taking time to update it. but this is working fine with development.
suggest something on this. what could be the reason?
Regards

Hi,
I do not think it relates to your Apex.
Do you have it in some other places?
Your DBA may investigate and put traces.
If you check Google on ora-02049 or Oracle docs about this error, you will be sure that it is on Db level
Regards
Oleg
Edited by: oleg.lihvoinen on Feb 6, 2010 3:02 PM

Clearing 1.14 update from iTunes in order to try again

Hi, The latest iphone update seems corrupt, and will not apply itself. iTunes reports that there is an update for my iphone, but when I choose to update, it fails. Seeing as the update has already downloaded - I assume that I have had a bad download. Where is the update so that I can try to update from afresh. Thanks in advance.
Message was edited by: Gwyn Plem

You can do a backup of iTunes to disk and then after reinstalling, take that backup and restore. I'm not sure exactly where the file is located, however I've also heard of people taking and plugging their phone in, and if they are prompted for the update they click on no. Then once they get the summary screen in iTunes, they are clicking on update and it is working. That may be an option for you, not sure.
The update was some bug fixes, one I know for sure was the SMS text misorder, another was bluetooth disconnection issues, as well as bluetooth support for GPS handsfree sets and the last one that I am aware of was call drop issues that seemed to be created by 1.1.3. Other than that, I'm not sure of anything. Someone else may be able to tell you where the file is located, but I'm sorry, I cannot.

Updated from Acrobat 5 to 7, seems to do far less. Need help.

I just "updated" from Acrobat Standard 5 to 7, but I guess I wasted my money. It doesn't seem to do half of what 5 did! Some upgrade!
Ok, now that I've vented, please tell me there's a way to select objects to delete them. I've tried the "Object Data Tool" and the "Select Object Tool," one of which you'd think would do the trick, but no. I tried clicking on the objects, I tried drawing a box around them, it acts as if there's nothing there. It won't select anything.
v7 apparently doesn't allow you to create or edit forms either, which 5 did! How is going backwards an update???

I have Acrobat Standard 7, not pro. But my v5 was not pro, and it did forms.
It also had no problem working with objects, the way this one seems to.
I've uploaded the file to a place where you can have access to it, it's a publication called the Humor Times:
http://www.humortimes.com/images/1010.pdf
Thanks for taking a look.

Taking 4ever to update from 3.2 to 5.0.

Similar Messages

Maybe you are looking for