Taking cluster disk offline made all other resources in the group to go offline.

Hi,
We have three node windows 2008 R2 failover cluster. When we tried to take one of the cluster disk offline from a application and services, it made all other resources in that application and services to go offline even though there was no dependency on
this disk. I want to know why it made all other resources to go offline. Can some one clarify please? Is it a default behavior?
Umesh

"When we tried to take one of the cluster disk offline from a application and services, it made all other resources in that application and services to go offline even though there was no dependency on this disk."
I'm a little unclear on your problem description. You state you are taking a "disk offline from a application and services". That implies the disk is necessary for the application and/or service, otherwise there is no way to take it
offline from that application and/or service. Then you state "there was no dependency on this disk". If there was no dependency on the disk, how you could take it "offline from a application and services"?
Using the Failover Cluster Manager consolde, select one of the resources that is going offline. Click on the Resources tab at the bottom of the center window. That resource does not show any dependency on the disk being taken offline?
Does it show dependency on any other resource that is dependent upon the disk you are taking offline?
. : | : . : | : . tim

Similar Messages

A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

Hi all
I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
Stay Hungry, Stay Foolish
Solved!
Go to Solution.

Steve Chandler wrote:
I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
Kudos for being sneaky.
I like these creative work-arounds!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards.

In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!

You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
https://www.macupdate.com/app/mac/15485/labels-&-addresses
I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
Regards.

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul

I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. Help needed.

I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. How do I add purchased playlist to ipod without erasing existing ipod playlists?

cujoftw wrote:
wow ... I get a headache just trying to read what you just said. I went and read how to migrate my library and found that you can only migrate purchased media.
No, you can easily migrate your entire library from one working compter to another.
If you fail to backup or migrate your library and find yourself with nothing but a new empty computer and a device full of content iTunes is designed to only recover the iTunes purchased content, however third party tools can help recover everything if needed.
tt2

Installed iTunes 10.5 but after I restarted my computer it won't connect to the Internet. All other computers in the house connect to Internet just fine. Help!!

Installed iTunes 10.5 but after I restarted my computer it won't connect to the Internet. All other computers in the house connect to Internet just fine. Help!! I Did all the regular modem diagnostics but that computer won't connect and it's a hard wire connection, not wireless (too far from the wireless signal). Is anyone else having this problem?

Hello, might try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
IFor 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

I have an index page that does not correctly load css, but css works on all other pages in the site.

http://www.boulderridgecondos.com/ does not load the css correctly, but ALL other pages in the site do load the css correctly. There is nothing different (that I can identify) between the pages.
http://www.boulderridgecondos.com/news.htm
I am guessing that there is something wrong in the css, I inherited this site and have gone over the css but can't find a issue that would cause this to occur.
Any help or suggestions to research something would be appreciated.

That page is saved as UTF-16 (Content-Type: text/html (BOM UTF-16, litte-endian)) in your text editor. The CSS file is send as ISO-8859-1. Firefox likes to see all files in the same encoding. The other pages are send as ISO-8859-1 and thus use that CSS file. You will have to re-save that page as ISO-8859-1 and upload that corrected version.

I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
 Cheers, Tom

All other buttons on the my internet banking is working except the log on button

Macbook Pro 13-inch Mid 2012 (Newly bought 5-6 months)
Porcessor 2.5 GHZ İntel Core i5
Memory 4 GB 1600 MHz DDR3
472.55GB free of 498.88 GB
OS X Yosemite Version 10.10.1
I use my Macbook Pro to do internet Banking. İn the internet Banking(HSBC Turkey) there is a LOG ON botton. That botton use to work before I upgraded to Yosemite, now it doesn't work but all other botton on the my internet banking is working except the log on botton. The weirdest thing is that if I log out to my Admin user and change to Guest User, then go to my internet banking site, the LOG ON botton is working without any problem.
One more thing, ever since I upgraded to Yosemite, when I turn off my MacBook Pro and turn on again, it start up very slow, is shows a counter while staring up, granting that I only used around 26-28 GB on the storage it should starts up without any delay.
Please help me!
Thanks,
Arnel
<Re-Titled By Host>

Regarding the internet banking site log on, I had a very similar problem with a different internet bank. It was resolved by Safari Menu > Clear History and Website data.

Is there and app that does the following. Multiple apps are showing a clock in different rooms, all are synced together, one ipad is a master ipad and if you change the time on it all other ipads change the time

Is there and app that does the following. Multiple apps are showing a clock in different rooms, all are synced together, one ipad is a master ipad and if you change the time on it all other ipads change the time

None of the spreadsheet apps that work with Excel files offer anything like full native support in iOS. Apple's own Numbers app pairs down features for the iOS version. The hardware is simply not up to what a true computer is capable of, so all apps like QuickOffice, DocumentsToGo, Numbers and so forth offer reduced features from their computer-version counterparts.
I think a custom app will be your only real choice, be it a fully standalone app, or something built in filemaker or some other db-based platform.

I recently updated my apple tv and now you wifi will not connect all other devices in the room are connected to wifi

i recently updated my apple tv to 5.1 now the wifi will not connect all other evices in the house are working fine, any help out there

Go to your ipod touch wireless settings chose your network and right beside there is button looks like ">" click on that check the dhcp what IP are you getting? do you get any ip? if you do your ipod touch should work with wireless no problem. Also, you may have to enter wep key again. After that it shou,d save your device

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you

This crap just happened to me this morning where I was sent 90% data plan threshold warningfrom AT&T (while sleeping at 7:09am) then 5 minutes later getting the Overage data plan warning from AT&T. This is all while I'm asleep right next to my phone plugged into a (non-Apple) dock on my clock radio.
Android has a limiting feature, why can't the "smart" guys at Apple learn from this??

Initiator Task not visible to other users in the Group

Hi
JDeveloper 11.1.1.6, WLS 10.3.6, BPM 11.1.1.6
I have a Process and the swimlane containing the Initiator Task is assigned to a Group.
All the users in the group are able to Initiate the Task.
But when the Task is initiated, the Task is assigned to the User specifically, but not to the Group. I guess this is the default behavior.
The Human Task Assignee - defaultPerformer for the Initiator Task is uneditable in the initiator.task file.
What I was expecting is that, since the Initiator swimlane is assigned to the Group, All the users in the Group should be able to see the Tasks initiated by anyone in the Group.
I want this behavior in the Initiator type of tasks specifically. (The normal Tasks other than Initiator tasks are working as expected.)
The reason why we want this is, let us say after the task is created, and before it is submitted, there is a lot of work to be done, for example, data entry, should be done by many people in the Group.
If all the users in the Group are able to see the Initiator Task, then it will help to share the responsibility of data entry among the users of the group.
I tried Reassigning the task to Group, and it works, but we am looking for something automatically assigning to the Group when the Process is created. (We may not be using the Oracle BPM Workspace at all).
Can anyone please tell us if there is a way to make the Initiator Task automatically assigned to the Group instead of just the user?
Thanks for any help
Sameer

Hi Ashwini
Thanks for replying.
I did the same and it was working for me even if the Type is Single.
I just gave the Group name and all users were able to see the task. This is fine with me.
I just observed one more thing.
When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
But the data entered by the creator is not seen by other users.
There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
Other users in the group are able to see the task and the saved data, but are not able to Submit.
What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
Is there a way to make the payload data only to save but not to claim the task?
Thanks and Regards
Sameer

My new ipad 2 freezes after using the internet for about 15 minutes. It is properly connected to the network and works fine after I re-start it but it is very annoying to have to re-start it every so often. All other laptops on the internet work fine.

My ipad 2 freezes when using the internet. Re-starting the ipad fixes the problem but it is very annoying to have to do this. I have tried all of the trouble shooting suggestions including re-joining the network. All other laptops work fine on my network. I think there is something wrong with my new ipad.

I recommend two things before taking your iPad back to the Apple Store.
1. Fully close safari, by going to your home screen, then double tapping your home button to bring up your most recently used Apps. Using your finger, hold it on any of the used Apps until they jiggle. At this point, you'll see a to the top left of each App. Touch the sign on Safari, which will fully close it.
Then.......
2. Reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any settings or data.
If that does not help, then make an appointment at the Apple store to have your iPad checked.

Taking cluster disk offline made all other resources in the group to go offline.

Similar Messages

Maybe you are looking for