TAPIOVERRIDE not working w/Outlook 2010 64-bit & Lync 2013 64-bit

Hi all,
I have a Win7 64-bit machine with Office 2010 Standard 64-bit and Lync 2013 64-bit. The user would like to use the Windows Dialer instead of Lync to call from his Outlook contacts. Prior to my installing Lync for him, this worked very well. However, thereafter
Lync attempts to do the calling.
There are dozens of threads out there for using the TAPIOVERRIDE registry fix (http://support.microsoft.com/kb/959625/en-us) to correct this issue, but it is not working for me and I assume it's due to my combination of application versions. I've confirmed
both approaches (HKLM\Software\Microsoft\... -vs- HKLM\Software\Wow6432Node\Microsoft\...) fail to work even after rebooting entirely - for the record, I would assume the "32-bit approach" is what I need.
Has anyone gotten the TAPIOVERRIDE fix to work with the aforementioned software versions? Can anyone else make a recommendation on a TAPI add-in for Outlook which would inherently override Lync's calling functionality?
Thanks!

Aaron0001,
Good news.  As an Office365 subscriber, I was able to open a service ticket on this issue, and I believe we've got a solution.  As it turns out, these Call Integration/TAPIOVERRIDE keys do work (as a precaution, I created both); however, it appears
they have to be in-place when you install Lync to have any effect.  I'm guessing that these keys may impact how Lync installs, but have no effect if Lync is already installed.
I had uninstalled Lync so that I could use Outlook with Windows dialer ... dialing functionality was restored as soon as I uninstalled Lync.  However, when I got online with the Microsoft technician he had me reinstall Lync 64bit (after the keys had
already been created) and, presto, Outlook is still using Windows dialer rather than contacting Lync to try to place the call.
I hope this is helpful to you, or to anyone else who happens upon this page with the same problem.
All the best,
Kevin

Similar Messages

  • In outlook 2013 Add-In, Adding dynamic menu to splitButton idMso="DialMenu" is working and the same code is not working in outlook 2010 Add-In.

    In outlook 2013 Add-In, Adding dynamic menu to <splitButton idMso="DialMenu"> is working and the same code is not working in outlook
    2010 Add-In. please let me know, if i am missing something. Below is the xml and screen shot
    <contextMenu idMso="ContextMenuFlaggedContactItem">
     <splitButton idMso="DialMenu">
              <menu>
                <dynamicMenu id="CallContactwithFreedomvoice
    " label="CallContactwithFreedomvoice" 
                            getContent="OnGetContenttest"                           insertAfterMso="Call"/> 
            </menu>       </splitButton>    </contextMenu> 

    Hi Narasimha prasad2,
    Based on the description, the context menu for the flagged contact doen't work in Outlook. I am tring to rerpoduce this issue however failed.
    I suggest that you check the state of the add-in first to see wether the add-in was loaded successfully.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Infopath form people picker not working in outlook 2010

    Hi,
    I have created custom task form which has reassign feature. If the form is opened in IE, people editor control is working but in outlook account names are not resolved and dictionary also not working. There should be some work around as OOTB  approval
    task form could able to do it.
    So, Question is, why people picker is not working in Outlook? and how to make it work? If I store user profile in InfoPath form, people editor in outlook is working. but how to make a dynamic soap connection ?
    Thanks.

    Don't mark your own post as an answer when you obviously didn't understand the question...
    Dharnima mentioned it is working in IE but not working in Outlook, so it's obviously not because the
    "Requested By" field is in read only otherwise it wouldn't work in IE either.
    Like Navid.R mentionned, the problem is indeed when going through the "Reassign Task" button, but coming from Outlook.
    I have the same problem where the people picker validator and the people directory button doesn't work, only when coming from Outlook. I do click on Reassign Task, but I am unable to valide or open the people directory with both people picker buttons, simply
    nothing happens.
    I tried adding a native SharePoint Approval workflow to my list, and this one works fine. I can click the "Open Task" button in Outlook, click "Reassign Task" and then the people picker works perfectly fine.
    However my custom workflow (that has default forms) does not work when prompted from Outlook.
    I even tried to delete both forms and republish my workflow, so SharePoint can regenerate the forms by itself, it did generate new forms, but no luck either.

  • PDF Preview Handler Not Working in Outlook 2010

    I have Win 7 Home Premium 64-bit and Outlook 2010.
    Everything was working fine, until a few months ago when the PDF Preview Handler stopped working. I got the typical message that others were having with the issue with Adobe Reader 9. I have Adobe Acrobat X Pro and have also used Adobe Reader X. I have tried the little registry fix app that is supposed to fix this issue, but it states that my registry is already correct. Has anyone found a resolution for this issue with Acrobat X and Outlook 2010? As a workaround I am using the Foxit PDF Preview Handler, but I have to reinstall it everytime Adobe Reader or Acrobat is udpated as for some reason Outlook then reverts back to the PDF Preview Handler, which is not working.
    Thanks,
    Merg

    Nope, using 32-bit. And I recently uninstalled Acrobat Pro completely and reinstalled it due to an issue with it not updating due to having the "Error Applying Transforms" issue. After I reinstalled, I updated it completely. I suppose I can try uninstalling and reinstalling again, but that seems like overkill.
    - Merg

  • Crystal  2008 not working with outlook 2010 mapi when exporting

    I recently had service pack 3 and fix pack 3.3 updated to my system ( crystal 2008) to help correct a issue with mapi not populating addresses from outlook when trying to export a report. I have a new issue. - sort of???
    Now when I try to export multiple reports in a row I still have the same issue. I can send 1 report out. But if i try to send another report out i have the same issue that I had with mapi not populating the addresses field from outlook.
    To get past this I shut down crystal and then bring it back up and I can send (ONE) report again before the same thing happens. Does anyone know if there is fix for this issue?
    Fyi - this has nothing to do with the design of my report.  The problem lies with how Crystal is communicating with mapi when trying to allowi a 2nd report to be exported.  I am not using any outside programs, only crystal 2008 version and trying to export my report through mapi (outlook 2010 (in PDF format).  As stated above with the above fixpack - I was able to restore exporting but now I can only export 1 report at a time.
    When I select a 2nd report to export (after just sending out my 1st) the mapi function will not allow me to select addresses.  So while the fix pack (from the website) restored some functionality it only allows 1 report at a time.

    Hi Max,
    It works for me. I get the Allow for 1 minute box and then I export again and same thing.... works...
    I'm using Windows 7 64 bit at home. It just installed SP 1 so that may be the difference also but I don't recall this being a problem before.
    I also don't see this being a CR problem, if it works once then something else is blocking the MAPI permission box. Check your anti-virus logs, could be it things a trojan is taking over your address book and blocking the second attempt. The AV logs should show you if something was blocked. Or disconnect from your network/disable network cards and disable your AV and test again.
    Do you have any other tool that allows you to export? If you install Winzip or WinRAR it adds a feature that allows you to right click on any file, save the PDF to disk and then test using the zip tool to see if that works for you. If not it's definitely your AV or possibly Firewall software blocking the pop up.
    Thanks again
    Don

  • Rules not working in Outlook 2010 Sent Items folder (Personal Folder)

    I've been trying to automatically categorize and send emails I've written and sent to the archive's Sent Items folder.  However, everytime I create a rule for a particular type of email it doesn't carry it out.  The rule will only work when I manually
    click 'Run this rule now...'.
    Here is what my rule looks like:
    Apply this rule after the message arrives
    from Byron33
      and sent to 'XXX'
      and with 'YYY' in the subject'
    assign it to the 'ZZZ' category
      and move it to the Sent Items folder (here, 'Sent Items' is in the Archive section)
    But it doesn't work.  All my other rules work (for the inbox folder).  Any way in which I can get this rule to function automatically?

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, I understand that the rule will only work when you manually click 'Run this rule now...'. If there is any misunderstanding,
    please feel free to let me know.
    Turn off Cached Exchange Mode to test this issue:
    http://office.microsoft.com/en-us/outlook-help/turn-on-or-off-cached-exchange-mode-HP010355560.aspx?CTT=1
    Click the File tab.
    Click Account Settings, and then click Account Settings.
    On the E-mail tab, click the Exchange account, and then click
    Change.
    Under Microsoft Exchange server, clear the Use Cached Exchange Mode check box.
    Exit and then restart Microsoft Outlook 2010.
    If it work fine after turn off cached exchange mode ,please repair your .OST file follow this article steps:
    http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA010354964.aspx?CTT=1
    More additional information
    Troubleshoot rules you can refer to this link:
    http://office.microsoft.com/en-us/outlook-help/troubleshoot-rules-HP005242904.aspx?CTT=1
    Similar thread you can refer this link:
    http://www.msoutlook.info/question/133
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this
    information.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Bug: Auto-archive does not work in Outlook 2010

    The Auto-Archive feature does not seem to work. In my case, I'm creating a mail folder in my inbox and setting the auto archival to "2 weeks, then delete". I run Auto Archival manually. It seems to progress without any error, but I know better.
    It should take the process more than a few minutes to process the mail I have stored up for almost a year. No error and my mail has been untouched.
    I noticed this thread in the Outlook 2010 beta forums
    I'm having the same issue. I'd like this bug fixed if possible? I keep archival folders to manage my mail.

    Hi Canovac,
    Auto Archive works as expected in my environment.   I noticed you said that you created a new mail folder in your inbox.  Did you just create the folder and move the mail to that folder?  Auto archive looks at modified date and if you
    move the mail to that folder that changed the modified date so the mail will not archive.
    To determine the modified date, do the following:
    While on the folder in question:
    Click View > View Settings > Columns
    In the Select available columns from dropdown choose
    All Mail Fields locate Modifed in the Available colums: and click
    Add
    If the mail has not been modified within the last two week span, please test the following for me.
    Start Outlook with the /safe switch and then run Auto-Archive. 
    Does auto-archive work when starting with the /safe switch?
    Regards, Teresa Microsoft Online Community Support Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community
    members reading the thread.

  • ICloud email account not working with outlook 2010

    How to I make iCloud and outlook 2010 work?

    See the section on setting up your iCloud account in Outlook 2010 in this Apple support document.
    iCloud: Set up iCloud Mail on your devices and computers
    By the way, you posted this in the Apple Developer forums, when it probably should have gone in the iCloud forum.
    B-rock

  • Outlook Delay Delivery not work in Outlook 2010

    Outlook Delay delivery is not working even after installing SP1
    Please update me
    10

    Hi King,
    Please make sure you have sat right for the Delay Delivery time.
    After you send the delay deliver email, please don’t open it in your Outbox.
    If you have open the email in your outbox, it will not deliver at the time you have sat.
    Delay or schedule sending email messages
    http://office.microsoft.com/en-us/outlook-help/delay-or-schedule-sending-email-messages-HP010355051.aspx
    Thanks,
    Evan

  • Viewmail 8.6.5 not working with outlook 2010

    Hello,
    I try to configure viewmail 8.6.5 with outlook 2010 on a windows 7 computer.  We have unity 7 and exchange 2007. I enter all the information in the viewmail setup but when I click test settings it says unable to find the voice mail server.  The unity server name  I entered is correct I can also ping it from my computer.  Any suggestions.
    Thanks.

    Hello Horacio,
    At this point we are missing what outlook version you have and what exact version of Unity or UConnection.
    1-Check Compatibility Matrix: Cisco Unity and the Software on Subscriber Workstations
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cuclientmtx.html#wp364674
    and see if everything matches accordingly to the supported versions, this is a well known issue. If everything does continue with option below.
    2-Beside the server name try with the IP instead.
    3-Check if you have turned on the SSl, if you do turn it off and try again
    Best Regards,
    David Peck

  • Read receipt not working in Outlook 2010

    Hi.  I am having some problems with read receipt. It does not work on my computer, it works fine on my co-workers computers.  It worked fine for a couple of weeks but no I neither receive read receives from others to confirm nor do mine get sent
    with my mails.  
    I have looked at rules and I have no rules. I really need this to work because of my work. 
    can someone please help me ?
    Thanks 
    Baldvin

    Hi Baldvin,
    Did you tick the 'Request a Read Receipt' option when composing a new message? Or did you select the option "Read receipt confirming the recipient viewd the message" under
    File tab > Options > Mail >
    Tracking section?
    Can you confirm if the recipient clicked Yes button and agreed to send the receipt?
    You can send test emails with a request for read receipt to yourself to check the result.
    Regards,
    Steve Fan
    TechNet Community Support

  • Previewer not working in Outlook 2010

    I have a windows xp machine that is unable to preview pdf files in outlook.  I get the error adobe pdf previewer failed to start.  I can prefiew other files like excel and word documents.  and when other users log onto the machine they have the same problem.  The computer used to run Office 2007 but I upgraded to Office 2010 and it still has the same issue.  I have uninstalled adobe and reinstalled from the web site and still the same problem.

    Have you opened Reader by itself and accepted the End User License Agreement?

  • Lync 2013 Frequent Contacts not showing in Outlook 2010 on RDS

    Running Outlook 2010 along with Lync 2013.
    On a Windows 7 PC if I launch Outlook first, then launch Lync. The frequent contacts will appear on the To-Do bar after "refreshing outlook" (minimizing and maximizing or changing folders.
    If I do the same thing on a Windows 2008 R2 RDS machine the Frequent contacts never appear. I have to close down Outlook and reopen Outlook for them to appear.
    Does anyone have any detail information about how the integration between Outlook and Lync works to bring through these contacts?
    Thanks

    Hi,
    I test the issue on Windows Server 2008 R2 and I found the frequent contacts appeared on the To-Do bar if I opened Outlook 2010 firstly and then opened Lync 2013 client.
    So please make sure Outlook 2010 and Lync 2013 client to the latest version and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • IPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones

    Problem: iPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones. Contacts synch fine. Was no problem in the past until...
    Sorry for the length. Trying to give all info I can.
    Summary: Had to get motherboard fixed under factory warranty which included new hard drive, and reinstall everything on an HP DV7 laptop. So this is a clean installation of everything on the laptop (Win7). Configuring iTunes and Outlook 2010 for two iPhone 4S users (myself and wife) was my last step. Re-established each user account to iTunes. Calendar synch problem popped up on one of two iPhones that did not exist before.
    Prior history: all synchs worked great prior to the clean install and I never had a problem.
    Config: Windows 7, two iPhone 4S, Week Calendar apps on both. All software up-to-date on iPhones and Win7 (fanatic about that). Had OL2010 PST datafile backups and simply used them for the OL re-installs. OL2010 makes that easy. Each user has their own Win7 login to keep our stuff separate. Of course, OL has Calendar as part of its install.
    Week Calendar apps on both are configured with same calendars (Calendar, Home, My Birthdays, Work). Verified each iPhone Calendars app, Calendar button: From My PC listing has all these checked: All From My PC, Calendar, Home, My Birthdays, Work; Other: Birthdays.
    Difference: In using iTunes to synch, iTunes said the iPhone account was different from the OL account and asked to merge or replace. Apparently this is normal for iTunes on a new install (since basically it is) synching to prior synched stuff.
    iTunes settings for both: Connect iPhone for each user and checked INFO settings for Contacts and Calendars.I used “selected calendars” and verified. Each user has all four calendars checked.
    NOTE: Prior to each users first synch below, neither user had anything in OL2010 Calendar. Can't blame on recurring events problems in OL. ALL the events are on the iPhones and are being synched TO the PC to populate OL2010 Calendars.
    Additional Note: Contacts was already loaded into OL from my backups so synching has no problem.
    User 1 iPhone: Success 1st try.
    In iTunes, selected “merge info” instead of replace.
    Results: User 1 synched fine from iTunes to OL2010 including the 4 Calendars (Calendar, Home, My Birthdays, Work). 4 calendars showed up. No problems at all. Wonderful! expected behavoir.
    User 2 iPhone: Still failing to synch.
    In iTunes, selected “replace” instead of merge info. Apple’s dialog is incredibly confusing and non-explicit on what copies to what and what it does.
    Results: User 2 synched fine from iTunes to OL2010 for Contacts. DID NOT synch the 4 Calendars (Calendar, Home, My Birthdays, Work). Only calendar that shows up in OL is Calendar and it doesn’t contain any data. iTunes has no errors and the synch status bar indicates everything went fine.
    Tried: I deleted the PST files and copied the backup files back to OL to start over. ITUNES no longer gives me the merge info versus replace option. I’ve synched multiple times but the calendar data will not synch.
    Not Tried: Creating the same remaining named calendars (Home, My Birthdays, Work) in OL and trying again.
    ALL suggestions is greatly appreciated.

    Ok, new info. This gets better and better.
    In OL2010, the Calendar in the navigation pane had no arrow indicating it had subcalendars within it. I right clicked on Calendar and chose New Calendar. It gave me a list of the existing calendars that were missing !!
    When I cancelled, there was an expand arrow next to Calendar in the Navigation pane !!!!!
    Expanding it showed the unchecked missing calendars. I checked them and synched again.
    WRONG THING TO DO! ALL my wife's calendar entries in her iPhone since the laptop went down 3 weeks ago DISAPPEARED. No warnings, nothing at any step of this process. The OL files overwrote the iPhone data.
    I can't find any way to get them back as this **** iStuff relies on iTunes for everything.
    Is there any way to get her files back from before this synch?
    Is there no way to save data files off the iPhone w/o iTunes?
    Why doesn't iTunes let you control the direction of data transfer?
    I now have one very ****** off wife.

  • "From" presence not displaying in Outlook 2010

    I've been working on a software product aiming presence and im integration with Microsoft Outlook using IMessenger API.
    Integration works as expected with Outlook 2013. However, the presence indicator of the
    "from" or sender does not display in Outlook 2010. The to, cc and bcc fields all display presence properly. In Outlook 2013 however, all of the from, to, cc and bcc fields display presence.
    There is a similar discussion for Outlook 2013 on:
    http://social.technet.microsoft.com/Forums/office/en-US/a2500fec-fc3f-4295-bbe3-7620876a2d24/from-presence-not-displaying-in-outlook-2013
    My problem is similar to this one except that I've the same problem with Outlook 2010 and I don't have this problem with Outlook 2013. It may be resolved in Outlook 2013 with a hotfix I don't know. Does anybody have the same issue and have a fix or workaround
    for this situation? I have latest updates for Office 2010 already.
    A strange thing is that when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 1, presence indicators are disappear from contact names as expected, however when I hover over the sender it
    displays sender's presence correctly on tooltip. So integration seems ok when I look at this.
    when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 2, presence indicators are disappear from both contact names and tool tips as expected.
    when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 0, presence indicators are appear for contacts in to, cc, and bcc fields except "from" field, which is quite strange. After
    I move around between messages, some of the sender's presence indicators starts displaying.
    Does anybody know why the presence indicator is not displaying consistently for the "sender" contact in Outlook 2010 when TurnOffPresenceIcon has value 0? Does anybody have the same issue and have a fix or workaround for this situation?

    Hi,
    There is another registry value named TurnOffPresenceIntegration
    which also have an effect on the presence indicator, please find the
    Key in: HKEY_CURRENT_USER\software\microsoft\Office\14.0\Common\IM
    or Policy Key: HKEY_CURRENT_USER\software\Policies\microsoft\Office\14.0\Common\IM
    and then check if the key value is set to 0.
    For more information, please refer:
    http://support.microsoft.com/kb/2726007
    Regards,
    Steve Fan
    TechNet Community Support

Maybe you are looking for