Target Area with Multiple Correct Choices

I hope someone can help me with this issue.
I am setting up a page that is going to be very interactive.
I will give you one segment of the page. There will be a group of
12 people (that have a certain job requirement) on the left and
then on the right side there will be 7 different work areas for
these people to work at. I want the user to drag 1 of the 12 people
to certain areas and leave them. Up to this point it should be
pretty straight forward, however, is gets more complicated....say I
want 1 person to be dragged and only accepted at areas 1, 3 and 7
but not at the other areas. How would I go about setting multiple
target areas that would be correct?

Well really it depends on how you are choosing to record the
right
answers and if you want to allow the user to put people in
the wrong
places. I dont think anyone will have the time to give you a
complete
run down on how to do all that without a fee but try looking
at the
active if field of the the target responses and set that to
different
icon titles.
Jason Stewart
logan3975 wrote:
> Anyone? If this is not possible to set up, please just
let me know so I can figure out another way to set this page up or
if you need more details I am willing to give more.

Similar Messages

  • Can clone be set to sample the original targeted area with every click (regardless of location)?

    Can the clone be set to sample the original targeted area over and over again regardless of x/y coordinates? it currently pins the original area to the result- it won't let me apply the targeted area in various locations (unless I target the specific area after every click). I am used to GIMP, where this is default... Thanks

    Good day!
    Do you mean »Aligned Sample« (in the Options Bar)?
    http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
    Regards,
    Pfaffenbichler

  • Target Mode with multiple partitions??? Also file sharing

    I am trying to connect my MacBook Pro to my older G4 using a firewire cable. My G4 has 2 hard drives, and one is divided in to 2 partitions. When I restart my G4 in target mode only the drive that is my start-up disk shows up.
    Is there any way around this?
    I've thought about just connecting my computers through file sharing but it only lets me share files in my public drive. Is there a way to share all of my files?
    Thanks,
    Justin

    Emailing you now...
    Lets say the Username on Machine#1 is jk1, Username on Machine #2 is jk2, and is an admin on #2...
    Then from Machine#1 use Go>Network, type in the name of Machine #2, (use the actual IP if the name can't find it), it should come up with the Dialog box with jk1 filled in for the name and asking for the password... but you have to change the name to jk2, (the one with permissions on Machine #2 to see everything), then type in the password of jk2.
    The only thing I can see why this wouldn't work for you is if Machine #1 can't find #2, or Permissions need Fixing on #2.

  • Problem scoring assessment with multiple correct actions

    I've created an assessment simulation in Captivate 4. On several slides, I have two click boxes set up to be the correct action. The user can click either one, receive credit for a correct response, and advance to the next slide. The problem is that the final scoring slide (and the data that gets passed onto the LMS) assigns two possible points to a slide like this (one for each of the two click boxes) instead of one. The result is that when the user clicks either of the two correct click boxes, it is scored as getting only 1 out of 2 points on that slide. Any ideas on how to make either click box count as a correct response, but not both of them count towards the total possible score? I have tried using Advanced Interactions to adjust the Points, Add to Total, Track Score and Report Answer settings, but haven't found a combination that works. Thanks in advance for any help you can provide!

    I don't get it. What is the significance of standby 1 and 2 VS standby 14 and 40? The only difference I noticed is the lower number of standby group goes with primry and higher goes with secondary.
    If possible, can you also try the same config you used before except swapping the group number?
    e.g.
    interface VLAN 32
    ip address 10.10.13.2 255.255.255.0 secondary
    ip address 10.10.32.2 255.255.248.0
    standby 40 ip 10.10.13.3
    standby 14 ip 10.10.32.3

  • Object with multiple states and slider in folio are rasterized, settings seem correct.

    I am having trouble keeping An object with multiple text states from being rasterized, as well as a slider that is also rastering.
    I have read that you are supposed to set the folio and article up to be .pdf and that the slider should have the vector option chosen.
    I haven't found anything for the multi state object to for these settings.
    What happens is when I output the folio to Adobe Content Viewer, only the text in those items is rasterized. All other text is crisp. Tested on both iPad Mini and iPad Retina and the both are blurry.
    Is there a way to force the vector option? It seems even with the correct options selected it is still rastering the test in interactive elements.
    Thanks!

    Here is the MSO with the folio.
    Here is the Slider with folio overlays panel.

  • Drag drop objects to multiple target areas

    Hi,
    I am trying to  make a quiz on metals. I have several elements which i want to fall into  multiple target areas (e.g. the target areas are shaded grey in the  following swf; metal_mc, nonmetal_mc, metalloid_mc). I can make  individuals match to target areas (as there are tutorials for that) but i  want each one to be able to slide in to any target area (and someday i  want to create a solve button which will then place each element in the  correct place).
    http://megaswf.com/serve/65365/
    I  have started all over and have designated only chlorine to move (for  the moment) but how do i code it to allow it to fall into any of the  grey areas?
    var objectoriginalX:Number;
    var objectoriginalY:Number;
    chlorine_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
    chlorine_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
    function pickUp(event:MouseEvent):void {
        event.target.startDrag(true);
    function dropIt(event:MouseEvent):void {
        event.target.stopDrag();
    chlorine_mc.buttonMode = true;
    function pickupObject(event:MouseEvent):void {
    event.target.startDrag(true);
    event.target.parent.addChild(event.target);
    objectoriginalX = event.target.x;
    objectoriginalY = event.target.y;
    (I would like to do it in AS3)
    any ideas or other similar tutorials most appreciated.
    many thanks,
    sosodef

    If you are not familiar with using the trace function, you should become familiar with it ASAP.  It is made for troubleshooting... it is your firend in finding things out.
    If you place...
    trace(event.target.dropTarget);
    before your conditional line, you will see what you are actually looking at wrt the dropTarget.  Your code from yesterday is not what you just showed, it was...
    if (event.target.dropTarget != null && event.target.dropTarget.parent == matchingTarget){
    As for that first bit of code, remove it for now.  It is AS2 which will not work in an AS3 file, and the stuff inside the function is not legitimate code in any AS version.

  • HT1692 Have recently installed itunes and outlook on a new computer.  Have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, Help!

    My new computer is 64-bit running Windows 7 pro, SP1 and Microsoft Office 2010 Pro Plus 32-bit
    My phone is a 4S runing iOS 6.1.3
    Very frustrated now that I have recently installed itunes and outlook on this new computer.  Everything worked perfectly ok on my laptop which was also 64-bit Windows 7 and running 32-bit Microsoft Office 2010 Pro.  I have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, when I sync the calendar and contacts are empty.  Not sure if there is any way to point itunes to particular address books and calendars.
    I have installed and uninstalled itunes 3 times and thank goodness have a backup
    Can anyone help please?
    thanks in anticipation

    I had my home computer set up to sync to work's Exchange server. It worked well, but I didn't like seeing work email messages and other programs trying to sync with my default Outlook folder, which was then the Exchange (& work related) .ost file. I know there are various ways to manage those problems using filters, view, subfolders, etc., but it was a hassle for me. I think it could work well for many other folks.
    For now, I have published my work calendar and subscribed to that calendar on my home computer. So I have view only access to my calendar on my home computer (and I can add/edit calendar items on my iPad (or Outlook Web Access) when away from work). This is not quite what I wanted, but it may work.
    It almost makes me long for the days when I used my Windows Mobile Treo to sync back and forth between exchange at work and outlook at home (but had many sync conflicts as a result).

  • With multiple events in a single event case, how to associate value with the correct object?

    I am playing with the template where an event structure takes note of user inputs and a main state machine is then used to respond to these inputs. When I only monitor one control I use the 'NewVal' output to read out the changed value. But when I monitor multiple objects with a single case I also have to associate the readout with the correct owner. After some tinkering I was able to extract the label property and use a case to assign them. Are there better ways of doing this? For example maybe there is a way to connect the label text directly to the 'bundle by name'?
    Also this should be easy to accomplish by simply creating local variables of the objects and read from them, but I got the impression that the use of global and local variables is now strongly discouraged?
    Thanks for any suggestions!
    Attachments:
    Untitled.png ‏39 KB

    Well, I don't really like these theroretical discussions. Can you attach a simplified version of some of your code?
    There are many other ways to identify the particular control. You could for example search an array of references for the value of the "ctlref" event data node. This would make the code much more robust (your code will fail for example if you (or some other programmer updating your code in a few years!) notices a mispelling and edits the label without also changing the case structure cases).
    LabVIEW Champion . Do more with less code and in less time .

  • Multiple choice with multiple answers

    Hello,
    I was wondering if someone can help me out.  I'm creating a series of tutorials useing Captivate and at the end of each one I want a slide that has the options
    a) re-run tutorial (jump back about 100 slides)
    b)go to next tutorial (next slide)
    c)return to start (jump to slide 1)
    I've had a look at the multiple choice questions in Captivate but they only seem to alow you to make one movement with a "correct" answer and I'm looking for more of a navigational tool.  Would this functionality be stored under the 'Quiz' section or somewhere else or is this function just not available in this tool?
    Thank you very much for your help,
    Michelle

    Hi there
    Notice that with the Multiple Choice question type, when you select one of the possible answers you have an Advanced button that may be clicked. You may then assign a different action for each answer selected. So answer a could jump back 100 slides, answer b could open another project and answer c could perhaps open Google.
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • DSD route settlement with multiple sales are

    Hi folks,
    I have looked in this forum for an answer for my problem but haven't found any, so i am creating this new thread.
    Well i am trying to settle a shipment in /DSD/DE_ENTRY transaction with multiple sales area in it, example:
    Visit 1 - Sales Org(D002) Distribution channel(GN) Division(GA)
    Visit 2 - Sales Org(D002) Distribution channel(GN) Division(GB)
    Visit 3 - Sales Org(D017) Distribution channel(17) Division(D1)
    The problem i get is that when i settle the shipment he mixes up the sales area in the visits, so far, allways in visit 3 where he puts up D002, 17, D1, giving the error of non existent sales area when trying to create the order(he doesn't mix up for all orders, only for some ones in the visit).
    Another strange fact is that i made 3 shipments with same data, and in all 3, he mixed up for different documents, in 1 he created 2 documents fine, in other one only 1, making me believe that he "randomly" atributes the sales area.
    What i need is to "manipulate" or have a solution for standard doesn't mix up the sales area, and atribute the correct sales area to the orders to create based on the sales are in the visit.
    Best Regards.

    Thanks for the link, it's more or less the functionality that I'm looking for but the issue with BW is that I need to do the Settlement at the moment that routes are arriving "on line" and with BW I need wait the load to BW system. A lot of routes are arriving frequently.
    ¿Do you know a R3 functionality for this? or ¿do you know a "Shipments settlement" who has all Shipments of the route? in order to use same transaction that is by transport.
    Thank's a lot

  • Multiple OUs with GPOs - One OU with multiple GPOs and security - One OU with one GPO and item level targeting

    Background...
    We have around 30 locations and we need to deliver different GPOs to these locations.
    There can be between 3 and 8 PCs in each location.
    These PCs can move around at short notice (mainly as a backup with neighbouring locations should
    PCs fail)
    The GPOs differ to change printers (2 per location and 2 backup printers from neighbouring location), auto login, desktop wallpaper
    Which is in your opinion the best solution for login speed, GPO & device management?
    1) Multiple OUs with a single GPO in each OU, the devices can be moved into new OU when the PCs move
    2) Single OU with multiple GPOs, add devices to security group and use security filtering on the GPOs
    3) Single OU with single GPO, add devices to security group and use item level targeting on the group

    > 1) Multiple OUs with a single GPO in each OU, the devices can be moved
    > into new OU when the PCs move
    > 2) Single OU with multiple GPOs, add devices to security group and use
    > security filtering on the GPOs
    > 3) Single OU with single GPO, add devices to security group and use item
    > level targeting on the group
    4) GPMC, Sites, "show sites". Then link appropriate GPOs to each
    individual site.
    That's the way to go here...
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • SQL Dealing with multiple choice answers in a DB with no unique identifier

    I am working with a Database that has forms set up with multiple select fields.  As seen below, (Question_ID 2533) the Patient_ID, Visit_ID, and Question_ID are the same and there are 3 different answers that were chosen.  I am trying to figure
    out how to seperate these Multiple answers so I can use SSRS to pull them into seperate fields. I believe I know how to use SSRS to pull the data after I have differentiated each answer. I need help with the SQL code...
    Patient_ID   Visit_ID   Form_ID   Question_ID   Answer_ID     Answer
    124            1685        164          2533             1490             
    Muscle pain
    124            1685        164          2533             1492             
    Weight loss
    124            1685        164          2533             1494            
     Shoulder joint pain
    124            1685        164          2534            
    678                Good
    124            1685        164          2535            
    678                Good

    I was able to get the unique identifier by creating a new table using the ROW_NUMBER()OVER and PARTITION BY Functions.  Then I was able to identify each answer of the multiple choice fields.  Here is the full code.
    CREATE TABLE Multiple_Answer(
     Patient_ID INT,
     Visit_ID INT,
     Visit_Date DateTime,
     Form_ID INT,
     Form_Name nvarchar(255),
     Question_ID INT,
     Question_Name nvarchar(1000),
     Answer_ID INT,
        Answer  nvarchar(1000),
        Multiple_Answer INT)
        INSERT INTO Medred_Reporting.dbo.Multiple_Answer
               ([Patient_ID]
               ,[Visit_ID]
               ,[Visit_Date]
               ,[Form_ID]
               ,[Form_Name]
               ,[Question_ID]
               ,[Question_Name]
               ,[Answer_ID]
               ,[Answer]
               ,[Multiple_Answer])
    SELECT        Patients.Patient_ID, Patient_Visits.Visit_ID, Patient_Visits.Visit_Date, Forms.Form_ID, Forms.Form_Name, Questions.Question_ID, Questions.Question_Name, Answers.Answer_ID,
                             Answers.Answer,
                             ROW_NUMBER()OVER
                             (PARTITION BY Patients.Patient_ID, Patient_Visits.Visit_ID,Forms.Form_ID,Questions.Question_ID
                             ORDER BY Questions.Question_ID)
                             AS Multiple_Answer
    FROM            Patient_Visits INNER JOIN
                             Patients ON Patient_Visits.Patient_ID = Patients.Patient_ID INNER JOIN
                             User_Visit_REL ON Patient_Visits.Visit_ID = User_Visit_REL.Visit_ID INNER JOIN
                             Users ON User_Visit_REL.User_ID = Users.User_ID INNER JOIN
                             Visit_Question_Answer_REL ON User_Visit_REL.User_Visit_ID = Visit_Question_Answer_REL.User_Visit_ID INNER JOIN
                             Symptom ON Visit_Question_Answer_REL.Symptom_ID = Symptom.Symptom_ID INNER JOIN
                             Question_Answer_REL ON Symptom.Question_Answer_ID = Question_Answer_REL.Question_Answer_ID INNER JOIN
                             Answers ON Question_Answer_REL.Answer_ID = Answers.Answer_ID INNER JOIN
                             Form_Question_REL ON Question_Answer_REL.Form_Question_ID = Form_Question_REL.Form_Question_ID INNER JOIN
                             Questions ON Form_Question_REL.Question_ID = Questions.Question_ID INNER JOIN
                             Protocol_Form_REL ON Form_Question_REL.Protocol_Form_ID = Protocol_Form_REL.Protocol_Form_ID INNER JOIN
                             Forms ON Protocol_Form_REL.Form_ID = Forms.Form_ID

  • Error while posting Customer with Multiple sales areas using DEBMAS05.

    Dear experts,
    We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05.  we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error:  "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created!  The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
    As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization).  OSS Note (384462)  provides further details about this. One Important point from the note is: 
    "As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
    Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
    For your customers, contact persons exist to which a private address or a different business address is assigned.".
    This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
    If someone have experienced the same issue before and have found a solution to it, kindly help out.

    I have found the cause and solution to this problem.
    This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
    This was resolved by splitting the IDOC into 2.
    The solution is to First post only the KNA1 segment and create the customer.
    In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”:  you would have got the KUNNR after the first step.
    Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC. 
    I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
    Cheers
    Venkat

  • Report with multiple Detail Area

    Hi All,
    Please see the Report pointed to the link below:
    [Report with multiple Detail Area|http://us.share.geocities.com/felix5ac/fairway.jpg]
    Some Explanations:
    ========================
    (1) The line with "ABCDEFGH..." is variable data coming from the database in the Detail Area
    (2) The lines with "WBLNX'" "123, 123.12", 
                             "WBLNX'"
       are variable data associated with the same Heading: "ABCDEFGH..."
    (2b) There can be multiple lines of data in the detail area (i.e. 1 or more "ABCDEFGH..." and the associated WBLNX and numbers...)
    (3) Item Code Descriptions ==> is a Header Info
    (4) ARL ... and FPHI... ==> are variable data and lines in these area can be 1 line; it can be 4 lines; it can be 10 lines...
    (5) Lines FROM "Artwork Procedures..." to the the end of the page are static.
    QUESTION:
    ===================
    How do I best design these Report with the multiple detail areas? Again, please see link of the Report above...
    Thanks and Best regards,
    Felix

    Hi Felix
    You can place the less detailed fields in the regular sections of the report and wherever you require multiple lines you can use the subreports.
    Hope this helps.
    Regards
    Nikhil

  • I have ripped all of my Cds into iTune, now I cannot find where some of the artists have been filled, not all the artists are listed, yet others are listed multiple times as they play with other groups. How do I list all one artist under his name? I know

    Sorry this will appear pretty basic stuff.  I have ripped all my Cds into iTunes, but in starting to make playlists it is apparent that some artists are listed multiple times as they appear with different bands, and others do not appear at all.  I have tried searching different categories, compilations etc, and Finder box does not bring them up.
    My questions are:-
    Do I need additional software to manipulate my tunes in iTunes?
    If so what is suggested?
    or if not:-
    How can I re arrange the tunes so that they appear only under one artist?
    How do I make my "lost" artists tunes appear?
    Thanks for any advice.

    I am not really following what the problem is here.  Artists are listed in the Artist field.  I guess you could stick individual artists in a band in a field such as comments, but then you would have to include searching the comments field in your search.  In which fields are these names located?
    How are you making these playlists? Are these smart playlists or are you just dragging tracks to a playlist?
    Are you doing this search with Finder's find or with iTunes' search?
    If I knew exactly what it was you were trying to do I could tell you if you need addditional software.  In reality though there isn't "additional software" for iTunes.  There's Applescript plugins but I don't see how the ones with which I am familiar would have anything to do with searching for artist names.
    How can I re arrange the tunes so that they appear only under one artist?
    Steve MacGuire aka turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message.jspa?messageID=9910895)
    Quick answer:  Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
    If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.

Maybe you are looking for