Target fieldpoint connection failed due to version conflicts
I have set up a small network of fieldpoint (fp-2015) and laptop with Ethernet. Then, I have succesfully configured this fp with MAX and downloaded the iak file to it. Now, I want to target the labview RT of this fp. However, the the connection failed with following message "Version Conflicts between host labview and RT Engine". I'm using Labview 7.1 released in August.
It sounds like the FP-2015 that you have has an older version of software on it (probably LabVIEW 7.0). To upgrade the software on the FP-2015, first launch Measurement & Automation Explorer. Locate the FP-2015 under Remote Systems. Right click on the software item and select Install Software. This will allow you to install the new software image and upgrade the controller to LabVIEW 7.1. Note: You will need FieldPoint Explorer 4.1 which shipped with LabVIEW 7.1. If you have an older version of FieldPoint Explorer, it will not have the 7.1 image for the FieldPoint controller.
Regards,
Aaron
Similar Messages
-
Import of a request failing : ERROR: connect failed due to DbSL load lib fa
Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
Transport control program tp ended with error code 0249
Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Request: E08K901525
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAYHi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit. -
Hi gurus,
We are upgrading the test server.we face a problem.the error message is "connect failed due to dbsl load lib failure".
"cannot find the dll dboraslib.dll in path"
But dboraslib.dll in the Dir_executable path.
Please provide the solution.
regards
gunamoorthy dyou must check the system path or user path, not dir_executable.
try this:
start -> Run
CMD
set
you will see a list of parameters, check the values for PATH. you must have an entry equivalent to your dir_executable. if not, do this:
right click on MY COMPUTER
choose PROPERTIES
click on ADVANCED tab
click on button ENVIRONMENT VARIABLE
change PATH to add the needed path.
once this is completed, you will need to restart SAP services and close down all command prompts... then try again. -
TP error: connect failed due to DbSL load lib failure
Hi All,
I have prepared Quality system from Production system as System copy.I have upgarded Kernel from 620 to 640 in Quality system.
After Kernel upgrade , Server details are as below
Operating System : windows 2003 IA 64
Database : SQL server 2000 IA 64
Kernel :640 and compiled for 64 bit non unicode system ,
patch number is 43.
SAP : SAP R/3 4.7
Before kernel upgrade , server details are as below
Operating System : windows 2000 server
Database : SQL server 2000
Kernel :620 and compiled for Non unicode system ,patch number
is 1363
SAP : SAP R/3 4.7
I am able to transport request from Development to Quality . But when I try to import request from Quality I am getting error message "Connect failed due to DBSL Load lib failure"
Error message is " connect failed due to DBSL load lib failure
cannot find the DLL dbmssslib.dll in path( K:\usr\sap\NBQ\SYS\exe\run)
problem when loading DB-dependent DLLs."
I have set Environmnet variable ( DBMS_TYPE value as mss) for nbqadm user.
I have seen that dbmssslib.dll file is exist in exe/run path.
Does anyone having an Idea , how to resolve this issue.Pls help me
Thanks in advance
Regards
VenuHi ,
Thanks for all
Issue is resolved by myself.
Instead of update Kernel to 640 , I have downloaded latest 620 kernel patch on IA 64 .
Since my production server is running on x86 and 620 kernel , i have downloaded 620 kernel for IA 64 .
That resolved my issue.
Regards
Sai -
[SOLVED] update zfs fails due kernel version
$ uname -v
#1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014
and
$ sudo pacman -Syu
:: Synchronising package databases...
core is up to date
extra is up to date
community is up to date
demz-repo-core is up to date
demz-repo-archiso is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: spl-git: requires linux=3.14.6-1
:: zfs-git: requires linux=3.14.6-1
As I have the required kernel version, I'm puzzled why pacman couldn't do the update.
Please enlighten me.
Last edited by theking2 (2014-06-22 07:54:43)@Xi0N
With spl{,-utils} and zfs{,-utils}, upgrading leads to circular dependencies. This can be worked around by always building the packages in a chroot, but it is a bit more work than a normal module add on from the AUR.
But while demizer's repo is super duper convenient, he is human and doesn't always get to updating the packages as soon as the new kernel drops to [core]. So from time to time, you will have to patiently wait for the unofficial repo to be updated before you can update the linux package. That said, I am pretty sure he versions the dependency on the linux package, so I don't think that you can install the new linux package and then end up with a non-working filesystem. Rather, the attempt to upgrade the linux package will fail due to unmet dependencies.
Edit: As a disclaimer, it has been a while since I have played with zfs. So while I think this information is accurate, things may or may not have changed.
Last edited by WonderWoofy (2014-06-26 23:27:17) -
Duplicate target database - is failed due to missing archive log
Hi,
"duplicate target database to " is failed due to required archive log is not found on tape.
After mounting the right tape, how to proceed , please suggest
ERROR:-->
RMAN>
connect catalog *******
connect auxiliary /
connect target ******
Run {
set until time '16-NOV-2008 23:50';
allocate auxiliary channel t1 type 'sbt_tape' parms ....
duplicate target database to mydb;
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/30/2008 10:27:00
RMAN-03015: error occurred in stored script Memory Script
ORA-19501: read error on file "orcl_ARCHIVES_BACKUP_0811160110_u0jvq7vt_1
_1", blockno 1 (blocksize=512)
ORA-27190: skgfrd: sbtread2 returned error
ORA-19511: Error received from media manager layer, error text:
ANS1314E (RC14) File data currently unavailable on server
Recovery Manager complete.
Thanks In Advance,This is basically not a RMAN problem,but a media management issue,which has to be addressed to the TSM staff:
ANS1314E
File data currently unavailable on server
Explanation:
The file data is currently unavailable on the server. A retrieve or restore operation was attempted. Possible causes are:
Data was corrupted at the server
Server found a read error
File is temporarily involved in a reclaim operation at the server
Server requested a tape volume that was marked unavailable.
System action:
Processing stopped.
User response:
Retry the operation. If the problem continues, see your system administrator to determine the problem from the server console or the activity log. Check whether any requests were made for a tape volume that was unavailable. A tape volume may be marked unavailable if prior read errors were encountered or the volume is checked out of the tape library.
Werner -
Erro: connect failed due to DbSL load lib failure
Error when trying to transport request
Error Attach.
My database is SQL 2008
Version of the kernel source: 201
Version of the kernel target: 225
Can you help me?
Tks,
RenatoHi,
I include the environment variables that were gone and rebooted the server, the error changed:
Erro: connect failed
Error code 0232
Tks,
Renato -
In FF 37.0 getting secure connection failed connecting to a website. Works fine in previous version. Config parameter version.fallback-limit default setting is 3. In previous version the default setting was 1. Does the setting version.fallback-limit to 3 mean only TLS1.2 is supported. Any help is appreciated.
Secure Connection Failed
The connection to xxxx.xxx.com was interrupted while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
Thx,The website may try to fallback to TLS 1.0 in a way that is no longer allowed in current releases or may be using a deprecated cipher suite.
You can open the <b>about:config</b> page via the location/address bar and use its search bar to locate this pref:
*security.tls.insecure_fallback_hosts
You can double-click the line to modify the pref and add the domain (full domain) to this pref.
If there are already websites (domains) in this list then add a comma and the new domain (no spaces).
You should only see domains separated by a comma in the value column.
See also:
*https://developer.mozilla.org/en-US/Firefox/Releases/36/Site_Compatibility#Security
*https://developer.mozilla.org/en-US/Firefox/Releases/37/Site_Compatibility#Security -
[Solved] Dovecot upgrade failed due to file conflicts
yaourt -Syu failed this morning do to file conflicts with dovecot. Here is the output:
:: Starting full system upgrade...
warning: iscan: local (2.15.0.3-1) is newer than archlinuxfr (2.8.0-3)
resolving dependencies...
looking for inter-conflicts...
Targets (10): libcups-1.3.10-1 cups-1.3.10-1 libmysqlclient-5.1.34-1 dovecot-1.1.14-1
ffmpegthumbnailer-1.5.0-1 mysql-clients-5.1.34-1 mysql-5.1.34-1 recordproto-1.13.2-2
renderproto-0.9.3-2 subversion-1.6.1-3
Total Download Size: 51.88 MB
Total Installed Size: 148.31 MB
Proceed with installation? [Y/n]
:: Retrieving packages from extra...
libcups-1.3.10-1-x86_64 185.2K 106.8K/s 00:00:02 [#########################################################] 100%
cups-1.3.10-1-x86_64 3.0M 121.0K/s 00:00:26 [#########################################################] 100%
libmysqlclient-5.1.... 12.2M 120.9K/s 00:01:44 [#########################################################] 100%
dovecot-1.1.14-1-x86_64 3.2M 120.2K/s 00:00:28 [#########################################################] 100%
mysql-clients-5.1.3... 278.2K 122.2K/s 00:00:02 [#########################################################] 100%
mysql-5.1.34-1-x86_64 25.9M 122.4K/s 00:03:36 [#########################################################] 100%
recordproto-1.13.2-... 4.0K 226.0K/s 00:00:00 [#########################################################] 100%
renderproto-0.9.3-2... 16.7K 86.4K/s 00:00:00 [#########################################################] 100%
subversion-1.6.1-3-... 6.9M 118.3K/s 00:01:00 [#########################################################] 100%
:: Retrieving packages from community...
ffmpegthumbnailer-1... 64.9K 119.1K/s 00:00:01 [#########################################################] 100%
checking package integrity...
(10/10) checking for file conflicts [#########################################################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
dovecot: /usr/lib/dovecot/imap exists in filesystem
dovecot: /usr/lib/dovecot/pop3 exists in filesystem
Errors occurred, no packages were upgraded.
Should I remove /usr/lib/dovecot/imap and /usr/libdovecot/pop3 and continue the upgrade, or is there a problem with a package?
Jay
Last edited by jt512 (2009-04-18 17:32:31)Abelian wrote:
http://www.archlinux.org/news/444/
yaourt -Syuf should do it
next time don't do it again.
just pacman -Sf package and then pacman -Su -
FDQM Target Dimension - connection failed
Hi, I am getting started to FDQM and I am trying to prepare the new environment so I started with the workbench and finished these steps:-
1) Imported the Essbase adapter (ES11XG4-J) to the application then registered it successfully.
2) Edited the two environment variables "ESSBASEPATH" and "PATH" with the right variables specified in oracle docs.
3) Opened the configurations of the Adapter from the workbench and submitted this settings:-
a) Source and Target Machines.
b) Application name, Essbase DB Name
The issue now is that when I view the mapped dimensions at the "Dimensions" tab, It always gives me a 'connection failed" error beside the "Target Dimension" label so I can't complete my work to map the dimensions.
I checked the error log also, and found that the error existing now saying "Essbase AP Procedure: [EsbSetActive] Threw code: 1051032-1051032", I searched for this error in the forum here but the solutions offered not working with me!
Your help is much appreciated , Thanks in advancewe need to update, ARBORPATH and ESSBASEPATH first, then in the PATH add as shown in the below link(If it is 64 bit machine)
Hyperion Installations and Implementations: FDM-Essbase Adapter Issue in Hyperion 11.1.2.x
Make sure, you have installed Essbase Client in the FDM Machine.
Once the Environmental Variables changes done, restart the Server then try again.
Let me know if you face any issue....!
Thanks,
Mady -
Networkmanager 3G connection failed due to lack of /var/locs directory
By far the packages that give me the most pain on upgrades is network-manager / modem-manager combo. This last time i was having it fail like this:
Jul 8 01:44:22 renata NetworkManager[1053]: <info> Activation (ttyACM0) Stage 3 of 5 (IP Configure Start) started...
Jul 8 01:44:22 renata NetworkManager[1053]: <info> (ttyACM0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 8 01:44:22 renata NetworkManager[1053]: <info> starting PPP connection
Jul 8 01:44:22 renata NetworkManager[1053]: <info> pppd started with pid 1328
Jul 8 01:44:22 renata NetworkManager[1053]: <info> Activation (ttyACM0) Stage 3 of 5 (IP Configure Start) complete.
Jul 8 01:44:22 renata pppd[1328]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
Jul 8 01:44:23 renata kernel: [ 154.870138] PPP generic driver version 2.4.2
Jul 8 01:44:23 renata kernel: [ 155.078468] NET: Registered protocol family 10
Jul 8 01:44:23 renata kernel: [ 155.085942] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul 8 01:44:23 renata kernel: [ 155.088396] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jul 8 01:44:23 renata pppd[1328]: pppd 2.4.5 started by root, uid 0
Jul 8 01:44:23 renata pppd[1328]: Exit.
Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
Jul 8 01:44:23 renata NetworkManager[1053]: <warn> Activation (ttyACM0) failed.
Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): deactivating device (reason: 0).
After a lot of head-scratching and a lot of searching this bbs for the failed (reason 'ip-config-unavailable') snippet that seemed to me to be the culprit, i ended up finding another log file telling me that:
Jul 8 01:44:22 renata pppd[1328]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
Jul 8 01:44:23 renata pppd[1328]: pppd 2.4.5 started by root, uid 0
Jul 8 01:44:23 renata pppd[1328]: Can't create lock file /var/lock/LCK..ttyACM0: No such file or directory
Jul 8 01:44:23 renata pppd[1328]: Exit.
Checked if i had a /var/lock dir, no. Created said dir, with write permission for users group, am writing this through the connection that just started working. I have absolutely no idea whether this is a liability, to have this dir with that write permission, of if i should do something different. Also, i have no idea why i didn't have such a normal-sounding dir... Anyway, i'm posting it just in case anyone bumps into the same criptic ip-config-unavailable message...
marcioHi Nat,
Thanks a lot for your response.
I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
Please let me know if you have any question.
Thanks,
Neeraj -
Installing grub2 fails due to labels conflicts?
I had a working arch setup on /dev/sda with the following setup:
/dev/sda1 /boot
/dev/sda4 /
Then I bought a new disk and installed a new archlinux onto LUKS from the previous working system. The new setup is the following:
/dev/sdb1 /boot
/dev/sdb2 /dev/mapper/cryptroot /
However I'm still booting from the old sda1 grub-legacy, I just edited the menu.lst to point to the new sdb1 /boot. Now I want to wipe the old disk because I want to encrypt it too. So I installed grub and issued the command:
root@HomeC # grub-install /dev/sdb
Installing for i386-pc platform.
grub-install: warning: Attempting to install GRUB to a disk with multiple partition labels. This is not supported yet..
grub-install: warning: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged..
grub-install: error: will not proceed with blocklists.
I don't know it there are multiple labels or not, and my google-fu didn't reveal anything useful (tried this for example: http://slopjong.de/2013/10/11/attemptin … n-labels/). My labels are like this:
lrwxrwxrwx 1 root root 10 2014-03-24 10:43 bakoboot -> ../../sdb1
lrwxrwxrwx 1 root root 9 2014-03-24 11:16 bakodisk -> ../../sdb
lrwxrwxrwx 1 root root 10 2014-03-24 10:43 sda1boot -> ../../sda1
lrwxrwxrwx 1 root root 10 2014-03-24 10:43 sda4ext4 -> ../../sda4
Well there is a suspicious entry, because I don't know how I labelled sdb itself as bakodisk, I probably wanted to label sdb2. Could that be the issue? How do I solve this problem? Also I tried to remove the label with
e2label /dev/sdb ""
but that didn't help either.Maybe worth quoting the result of fdisk -l:
Disk /dev/sda: 298,1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00091306
Device Boot Start End Blocks Id System
/dev/sda1 * 63 6256639 3128288+ 83 Linux
/dev/sda2 619080840 625137344 3028252+ 5 Extended
/dev/sda4 6256640 619079679 306411520 83 Linux
/dev/sda5 619080903 625137344 3028221 82 Linux swap / Solaris
Partition table entries are not in disk order.
Disk /dev/sdb: 232,9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc54cfa1d
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2099199 1048576 83 Linux
/dev/sdb2 2099200 488397167 243148984 83 Linux
Disk /dev/mapper/cryptroot: 231,9 GiB, 248982462464 bytes, 486293872 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes -
Hi Experts,
We have installed sql server 2005 sp3 and for some reason the sidadm user profile had some issue and I was not able to login.
The admin guys deleted the profile because of which I could login to the system. But the env. variable was not visible.
so added the standard variable.
Imp: There was some issue while sap startup and the dev_w0 was giving some error related to db connect and mentioned some note and also set the MSSQL_FORCEOLEDB=1. and then SAP came up.
When the env. variable dbms_set = mss was present in user variable of sidadm, and then tested the stms> system> communication --we got this error
DB Connect Link to database failed
Offline Call connect failed due to DbSL load lib fa..
This is tp version 372.04.71 (release 701, unicode enabled)
ERROR: No connect due to DbSl Load Lib Failure
ERROR: environment variable dbms_type is not set.
ERROR: Connect to DCO failed (20100625094219).
INFO: no trace information stored
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
standard output from tp and from tools called by tp:
After changing the env variab ( system ) DBMS_TYPE to mss and deleting from user variable we got the following err
This is tp version 372.04.71 (release 701, unicode enabled)
ERROR: Connect to DCO failed (20100625100539, probably wrong environmen
TRACE-INFO: 1: [dev trc ,00000] Fri Jun 25 10:05:39 2010
0.021323
TRACE-INFO: 2: [dev trc ,00000] DlLoadLib success: LoadLibrary("d
TRACE-INFO: 3:
0.021333
TRACE-INFO: 4: [dev trc ,00000] using "E:\usr\sap\DCO\DVEBMGS
0.021342
TRACE-INFO: 5: [dev trc ,00000] Thread ID:6508
0.023983
TRACE-INFO: 6: [dev trc ,00000] Thank You for using the SLOLEDB-i
0.023998
TRACE-INFO: 7: [dev trc ,00000] Using dynamic link library 'E:\us
0.024017
TRACE-INFO: 8: [dev trc ,00000] dbmssslib.dll patch info
0.024042
TRACE-INFO: 9: [dev trc ,00000] patchlevel 0
0.024052
TRACE-INFO: 10: [dev trc ,00000] patchno 92
0.024062
TRACE-INFO: 11: [dev trc ,00000] patchcomment Improved overflow
0.024076
TRACE-INFO: 12: [dev trc ,00000] np:(local) connection used on SE
0.024124
TRACE-INFO: 13: [dev trc ,00000] CopyLocalParameters: dbuser is '
0.024137
TRACE-INFO: 14: [dev trc ,00000] Using Provider SQLNCLI
0.034997
TRACE-INFO: 15: [dev trc ,00000] OpenOledbConnection: MARS proper
0.035082
TRACE-INFO: 16: [dev trc ,00000] Provider Release:9.00.4035.00
0.098421
TRACE-INFO: 17: [dev trc ,00000] Using Provider SQLNCLI
0.099260
TRACE-INFO: 18: [dev trc ,00000] OpenOledbConnection: MARS proper
0.099302
TRACE-INFO: 19: [dev trc ,00000] i'm dbo but there exists 1 users
TRACE-INFO: 20:
0.113172
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
standard output from tp and from tools called by tp:> After the installation of SCM7 the network guys updated the Windows and security patches. After that the SIDADM was not able to login and seems they deleted the profile because of which we can login through SIDADM. After that I have set the general parameter.
Did you ever try to find out the root cause why the user was not able to log in? Since the profile was deleted all environment settings are gone. The only clean way would be to do a system recovery since it's not only the environment but also permissions and local policies that got deleted - including registry permissions and ACLs.
> The SAP is up but while upgrade the SPAM we are facing this issue. and tried all the thing
The environment of user SAPService<SID> doesn't seem to be right.
I suggest you open an OSS call and let the support have a look on your system. It's very difficult to help you without having system access.
Markus -
Connect failed because target host or object does not exist
Hello,
I've installed XE 10.2 under Fedora Core 7 from the downloaded .rpm. The RPM installs fine, and I've run the config from the command line. I've edited my bash file to load the environment variables. Here's my hosts file:
xxx.xxx.xxx.xxx hostname hostname.domain
127.0.0.1 localhost.localdomain localhost
When I start the oracle-xe service from the services interface, I get this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 20-JUL-2007 14:49:01
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX.XXXX)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
with the HOST name filled in. None of the messages I've searched though on this forum relate to this error. Any help would be greatly appreciated.
-B
ps. I'm running this on my local machine.Thanks! that got most of my listener up and running. I now get this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 24-JUL-2007 09:01:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 24-JUL-2007 09:01:31
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
I performed a quick search on the forum and then tried this:
SQL> connect / as sysdba
Connected.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01507: database not mounted
SQL> alter database mount;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying control file, check alert log for more info
I checked the log file and it shows this:
Fri Jul 20 11:14:17 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:17 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5332.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5332
Fri Jul 20 11:14:18 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:18 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5334.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5334
Fri Jul 20 11:14:19 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:19 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5341.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5341
Fri Jul 20 11:14:20 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:20 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5360.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5360
Fri Jul 20 13:47:47 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:47:47 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7963.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7963
Fri Jul 20 13:48:41 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:48:41 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8332.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8332
Fri Jul 20 13:49:32 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:49:32 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8671.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8671
Fri Jul 20 13:50:51 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:50:51 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8708.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8708
Fri Jul 20 14:15:44 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:15:44 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9214.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9214
Fri Jul 20 14:27:16 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:27:16 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9688.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9688
Fri Jul 20 14:32:26 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:32:26 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9828.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9828
Fri Jul 20 14:40:39 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
MMAN started with pid=4, OS id=2232
PSP0 started with pid=3, OS id=2230
PMON started with pid=2, OS id=2228
DBW0 started with pid=5, OS id=2234
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2238
SMON started with pid=8, OS id=2240
RECO started with pid=9, OS id=2242
CJQ0 started with pid=10, OS id=2244
MMON started with pid=11, OS id=2246
Fri Jul 20 14:40:41 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2248
Fri Jul 20 14:40:41 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Jul 20 14:40:42 2007
ALTER DATABASE MOUNT
Fri Jul 20 14:40:42 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Fri Jul 20 14:40:45 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Jul 23 08:23:17 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2228
PSP0 started with pid=3, OS id=2230
MMAN started with pid=4, OS id=2232
DBW0 started with pid=5, OS id=2234
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2238
SMON started with pid=8, OS id=2240
RECO started with pid=9, OS id=2242
CJQ0 started with pid=10, OS id=2244
MMON started with pid=11, OS id=2246
Mon Jul 23 08:23:19 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2248
Mon Jul 23 08:23:19 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jul 23 08:23:20 2007
ALTER DATABASE MOUNT
Mon Jul 23 08:23:20 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Jul 23 08:23:23 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Jul 23 08:28:52 2007
Starting ORACLE instance (normal)
Mon Jul 23 14:22:36 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2226
PSP0 started with pid=3, OS id=2228
MMAN started with pid=4, OS id=2230
DBW0 started with pid=5, OS id=2232
LGWR started with pid=6, OS id=2234
CKPT started with pid=7, OS id=2236
SMON started with pid=8, OS id=2238
RECO started with pid=9, OS id=2240
CJQ0 started with pid=10, OS id=2242
MMON started with pid=11, OS id=2244
Mon Jul 23 14:22:38 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2246
Mon Jul 23 14:22:38 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jul 23 14:22:39 2007
ALTER DATABASE MOUNT
Mon Jul 23 14:22:39 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Jul 23 14:22:42 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 08:05:53 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PSP0 started with pid=3, OS id=2235
MMAN started with pid=4, OS id=2237
PMON started with pid=2, OS id=2233
DBW0 started with pid=5, OS id=2239
LGWR started with pid=6, OS id=2241
CKPT started with pid=7, OS id=2243
SMON started with pid=8, OS id=2245
RECO started with pid=9, OS id=2247
CJQ0 started with pid=10, OS id=2249
MMON started with pid=11, OS id=2251
Tue Jul 24 08:05:55 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2253
Tue Jul 24 08:05:55 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:05:56 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:05:56 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:05:59 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Shutting down instance: further logons disabled
Tue Jul 24 08:16:25 2007
Stopping background process CJQ0
Tue Jul 24 08:16:25 2007
Stopping background process MMNL
Tue Jul 24 08:16:26 2007
Stopping background process MMON
Tue Jul 24 08:16:27 2007
Shutting down instance (immediate)
License high water mark = 1
Tue Jul 24 08:16:27 2007
Stopping Job queue slave processes
Tue Jul 24 08:16:27 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Tue Jul 24 08:16:29 2007
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 08:16:31 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3340
PSP0 started with pid=3, OS id=3342
MMAN started with pid=4, OS id=3344
DBW0 started with pid=5, OS id=3346
LGWR started with pid=6, OS id=3348
CKPT started with pid=7, OS id=3350
SMON started with pid=8, OS id=3352
RECO started with pid=9, OS id=3354
CJQ0 started with pid=10, OS id=3356
MMON started with pid=11, OS id=3358
Tue Jul 24 08:16:31 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3360
Tue Jul 24 08:16:31 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:16:32 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:16:32 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:16:32 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 08:38:07 2007
Starting ORACLE instance (normal)
Tue Jul 24 08:43:09 2007
Starting ORACLE instance (normal)
Tue Jul 24 08:49:39 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2224
PSP0 started with pid=3, OS id=2226
MMAN started with pid=4, OS id=2228
DBW0 started with pid=5, OS id=2230
LGWR started with pid=6, OS id=2232
CKPT started with pid=7, OS id=2234
SMON started with pid=8, OS id=2236
RECO started with pid=9, OS id=2238
CJQ0 started with pid=10, OS id=2240
MMON started with pid=11, OS id=2242
Tue Jul 24 08:49:41 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2244
Tue Jul 24 08:49:41 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:49:42 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:49:42 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:49:42 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Shutting down instance: further logons disabled
Tue Jul 24 08:51:39 2007
Stopping background process CJQ0
Tue Jul 24 08:51:39 2007
Stopping background process MMNL
Tue Jul 24 08:51:40 2007
Stopping background process MMON
Tue Jul 24 08:51:41 2007
Shutting down instance (immediate)
License high water mark = 1
Tue Jul 24 08:51:41 2007
Stopping Job queue slave processes
Tue Jul 24 08:51:41 2007
Job queue slave processes stopped
Waiting for shared server 'S003' to die
All dispatchers and shared servers shutdown
Tue Jul 24 08:51:42 2007
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 08:51:45 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3070
PSP0 started with pid=3, OS id=3072
MMAN started with pid=4, OS id=3074
DBW0 started with pid=5, OS id=3076
LGWR started with pid=6, OS id=3078
CKPT started with pid=7, OS id=3080
SMON started with pid=8, OS id=3082
RECO started with pid=9, OS id=3084
CJQ0 started with pid=10, OS id=3086
MMON started with pid=11, OS id=3088
Tue Jul 24 08:51:45 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3090
Tue Jul 24 08:51:45 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:51:45 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:51:45 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:51:45 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 09:00:41 2007
alter database open
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:00:54 2007
Starting ORACLE instance (normal)
Tue Jul 24 09:01:02 2007
alter database open
Tue Jul 24 09:01:02 2007
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:01:21 2007
Shutting down instance: further logons disabled
Tue Jul 24 09:01:21 2007
Stopping background process CJQ0
Tue Jul 24 09:01:21 2007
Stopping background process MMNL
Tue Jul 24 09:01:22 2007
Stopping background process MMON
Tue Jul 24 09:01:23 2007
Shutting down instance (immediate)
License high water mark = 2
Tue Jul 24 09:01:23 2007
Stopping Job queue slave processes
Tue Jul 24 09:01:23 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Tue Jul 24 09:01:29 2007
PMON failed to acquire latch, see PMON dump
Tue Jul 24 09:01:29 2007
ALTER DATABASE CLOSE NORMAL
Tue Jul 24 09:01:29 2007
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 09:01:31 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3682
PSP0 started with pid=3, OS id=3684
MMAN started with pid=4, OS id=3686
DBW0 started with pid=5, OS id=3688
LGWR started with pid=6, OS id=3690
CKPT started with pid=7, OS id=3692
SMON started with pid=8, OS id=3694
RECO started with pid=9, OS id=3696
CJQ0 started with pid=10, OS id=3698
MMON started with pid=11, OS id=3700
Tue Jul 24 09:01:31 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3702
Tue Jul 24 09:01:31 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 09:01:31 2007
ALTER DATABASE MOUNT
Tue Jul 24 09:01:31 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 09:01:31 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 09:01:57 2007
alter database open
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:02:47 2007
alter database mount
Tue Jul 24 09:02:47 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 09:02:47 2007
ORA-205 signalled during: alter database mount...
I checked the /usr/lib/oracle/xe/oradata/XE/ directory, and there is nothing in that file...
I am also concerned about these lines near the top of the log:
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths -
ORA-12545: Connect failed because target host or object does not exist
Hey Guys,
I know this particular query has been pinging around for ages now, but i cannot seem to get a good answer from anywhere :)
Oracle 10g Database RAC installation- installed/ and running
Oracle 10g Client on different box.
Problem:
[user@myserver ~]$ sqlplus
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:14:11 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: user
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
All env variables are set in user .profile:
export ORACLE_HOME=/space/oracle/oracle/product/10.2.0/client_1
export ORACLE_SID=MSRAC
PATH=$PATH:$ORACLE_HOME/bin:$JAVA_HOME/bin
export PATH
Full contents of tnsnames.ora on client machine:
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
I am not sure if the first 3 connection entries are even needed in here, are they?
The last entry is the connect info for the live database.
What buggs me is that this works:
[user@myserver ~]$ sqlplus 'user/user@msrac'
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:19:40 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
With the Real Application Clusters option
SQL>quit
BTW: This is the error catpured in sqlnet.log
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1/bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=myserver.me.com)(USER=user))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 04-APR-2008 16:14:16
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
I have a funny feeling that the problem lies with either:
PROTOCOL=beq
and/or
ARGV0=oracleMSRAC
I have tried everything to remedy this, this is why i am now turning to you guys.
Any and all help is always greatly appreciated.
RobertHi Guys,
Thank you both for your responses, my findings are as follows:
1. HOST=X.X.COM, ensure host is reachable : PING works and host(s) are reachable.
2. In RAC Env, ensure TNS Name is correctly spelled, spelling fine, i can connect with the tns name (is TNS name same as SERVICE_NAME?) by: sqlplus 'user/user@racenv'; but my efforts still will not allow me to use:
sqlplus 'user/user' it tells me that the host or object is does not exist, does this refer to the actual physical machine or the service name, or the instance name?
All host entries in my tnsnames.ora file refer to the vip addresses of both servers holding the rac installation, and both are resolved just fine, testing with ping; any other way to test this?
tnsnames file contains CONNECTION strings in the following order (does the listener entry need to be in the file? on the machine that i am trying to connect from?):
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I tried removing all entries but the entry for MSRAC, but still no joy:
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
Thanks again,
Robert..
In the sqlnet.log file the error is as follows:
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1//bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=x.x.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 07-APR-2008 11:03:12
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
It mentions PROTOCOL=BEQ, this should be TCP, is there a way to enforce TCP or disable BEQ??
Rob
Message was edited by:
DobSun
Maybe you are looking for
-
Hi, Is it possible to run Front Row on a MacBook with the lid shut? I want to connect a MacBook to a 32" LCD TV and run Front Row on the TV screen. And ideally I'd like to be able to do that with the MacBook's lid closed.
-
Hello everyone, I am trying to put a document together to have a check list for integration testing. does anybody have anything like this that can share? Or any tips of what steps should be taken in consideration to complete integration testing? Tha
-
Transformation during LDAP Sync reconciliation in OIM 11g
Does anyone know if the use of transformations is supported in LDAP Sync reconciliation in OIM 11g? The reconciliation of LDAP User records is defined in /db/LDAPUser in the OIM metadata. The default version of this file has entries to specify OneToO
-
T-code to upload mutliple files into SAP directories ?
Hi, Is there any other transaction to upload multiple files into SAP directories ( ALL11) other than CG3Z ? Any other procedures at the operating system level ? Please advise. Regards Shiva
-
Reverse delivery with batchsplit
Hi All, when you reverse the Transfer Order the batch split line has to be removed using an SAP program, Can anyone let me know that?