Task Missing

Hi,
SDE_ORA_ProductDimension_Derive task is missing when i try to set $$MASTER_ORG through DAC Design View. Please help where's the problem

Its a documentation bug. Look at the task 'SDE_ORA_ProductDimension' for configuring $$MASTER_ORG.

Similar Messages

  • KM Scheduler Tasks Missing!!

    We have been experiencing KM Scheduler Tasks issues. The installed custom KM Schedulers disappear for some days and shows up again. There are four schedulers currently missing which we have installed with the last transport. We were able to see those schedulers after the transport migration. We have experienced the same issue last month and then the scheduler tasks started acting normal after multiple server restarts. However this time the server has been restarted four times since last one week but we still couldn't get to the missing four scheduler tasks.
    We have checked the deployment log and the transport installed successfully
    SAP NetWeaver 7.0 SP14
    Please Help!!

    Hi Dana,
    You can use the standalone log-viewer to view the log files. See the documentation on sap help. http://help.sap.com/saphelp_nw04/helpdata/en/47/209779bbe64a318454b64148a0c76d/frameset.htm
    The best way would be to include some tracing and logging statements in your scheduler code.
    Create a new location in your code
    private static Location logger = Location.getLocation("mylocation");
    and put some trace statements in your code
    logger.intoT("start of method");
    But you will have to create a new location in Log Configurator in the VA and set the severity level to INFO. Then in the default.trc you can filter on your location name to get the relevant traces.
    Akhilesh

  • Photoshop CC 2014   Bridge CC: automated tasks missing

    I Have downloaded the new Photoshop CC 2014 and updated to Bridge CC. I am no longer able to run automated tasks from Bridge in Photoshop because the "photoshop" submenu is no longer available under tools… unistalling en reinstalling brings no avail. I'm now back to Photoshop CS6 and Bridge CS6… I just would like to know: Am I doing something wrong or is this a bug that hopefully will soon get fixed?

    Please post queries regarding Adobe Bridge over at
    Bridge General Discussion

  • User Task: Missing elements from payload

    I have created a user task that sends an array of 'people'. The user can select the people they want and reject the rest by removing / setting blank values.
    I have checked that the payload is being set as an array, but the JSP screen for the task only displays a single element for that array.
    When the user completes the task, the entire array is sent back, so I am guessing that this is a problem with the JSP knowing there is more than one element.
    Is there a way I can add the JSP code to access further elements?
    The payload type is defined in my process .wsdl file.
    Thanks,
    Dan

    You can edit the generated JSP to make it do whatever you like. We did this to handle arrays as well, but it proved to be pretty painful.

  • Flexunit task missing time info

    I'm not sure why, but when I run my unittests with the ant task, in the generated report xml, time is always displayed as 0.000.

    It is fixed in the code base on github and available in the FlexUnit 4.1 Beta 2 and upcoming Beta 3 release.
    The first release version where it will be fixed is 4.1
    Mike

  • Netconfig Ad Hoc and System Tasks Missing

    I recently upgraded to LMS 3.2 with RME 4.3.1. I don't have the option to create ad hoc jobs and I don't see any system tasks available. The tasks folder expands to reveal nothing.
    Any ideas?

    Restoring the backup did not fix the problem. I just tried reinitialize the RME database and got the following error:
    E:\Program Files\CSCOpx\bin>perl E:\Progra~1\CSCOpx\bin\dbRestoreOrig.pl dsn=rmenf dmprefix=RME
    FATAL ERROR: e:\PROGRA~1\CSCOpx\databases\rmenf\orig\odbc.tmplorig does not exist, or is not readable.
    Verify that the DSN exists, before contacting a Cisco support engineer.
    Ideas?

  • BPM 7.3 basis setup - deploy error

    Hi guys,
    I`m a PI developer and quite new to SAP BPM, only took part in the SAP training several months ago.
    Now the installed a BPM 7.3 system and I`m trying to implement some processes starting with
    the sample of the training.
    I created a RuleSet and try to deploy it as a web service.
    During deployment I get following error.
    message: Deployment failed
    plug-in ID: com.sap.ide.tools.services
    Error code: 0
    Exception stack trace:
    com.sap.ide.eclipse.deployer.api.APIException: System BPM not responding.
         at com.sap.ide.eclipse.deployer.DeployerPlugin.getCurrentServerInfo(DeployerPlugin.java:91)
         at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:233)
         at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:205)
         at com.sap.ide.tools.services.dc.EngineDcDeployService.deployFiles(EngineDcDeployService.java:255)
         at com.sap.ide.tools.services.dc.EngineDcDeployService.deploy(EngineDcDeployService.java:135)
         at com.sap.ide.dii05.ui.internal.actions.dc.DcDeployAction$4$1.run(DcDeployAction.java:262)
         at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    Does anybody have an idea what the reason for this error could be or how it could be investigated best?
    The basis "just" installed the system and probably there are several BPM related configuration tasks missing.
    Is there a guide describing all the necessary configuration steps during new installation of BPM?
    We`ve also faced a network issue when port 5xx13 was not open and I was not able to connect my NWDS with the Java AS Server. Are there more ports needed during development, deployment and running of the processes?
    I already searched for this error and also config guides in SDN and the web, but without result.
    Any help appreciated.
    Thanks in advance
    Kind regards,
    Jochen

    Hi,
    I also had the same problem but I'm not convinced that there was anything needed to change on the servr side (in the p4 port or firewall settings). I'm not using firewall at all anyway and the p4 port has always been open. I rather think this is a bug in NWDS unfortunately. As I'm using a local server installation, the solution I found is as follows:
    1.) In NWDS go to Preferences -> General -> Network Connections and set the Active Provider to "Direct" which means I don't want to use proxy connection.
    2.) In NWDS go to Preferences -> SAP AS Java and remove the current server settings. Also disable the checkbox "Automatically detect local system at startup". Afterwards I added the local server again but by using local IP instead of "localhost" like this:
    Instance Host Name: 127.0.0.1
    Instance Number: <0 for me but use your own instance number of course>
    Add to Domain: I left it empty
    Use HTTP: unchecked
    That was it. Upon the next deployment I was prompted for the J2EE user and password deployment was successful. I have been developing with NWDS 7.11, 720 etc. since many years but I've never seen this error prior to NWDS 7.3.
    Hope this helps for some people in the future :-)
    Viktor

  • JMD issues

    Hi
    Questions needed to be answer based on JMD using Adobe Central Output Server version 5.5
    1)Is there a limit for the numbers of JOBS or TASKS to be created?
    Cos currently inside my JMD there are quite alot of jobs and tasks and
    i found out that some of the jobs after reloaded have all its assigned
    tasks missing althought it existed inside the physical <<jfserver.jmd>>
    file.
    I tried reducing the number of jobs > reload JMD > check back to the
    previous jobs with missing tasks > everything is back to normal the
    missing tasks appeared now.
    (I modified the Job line inside the <<jfserver.jmd>> file instead
    of inside the Central)
    2)I have made use of the <<jfctrl00.msg>> method to reload my JMD, it does
    indicate in the log but physically the JMD isn't reloaded
    Please do give some advise on this.
    Thanks alot

    I don't know what the limitations may be. Currently we have
    67 Jobs
    48 Tasks
    97 Printers
    defined, with more to come. I do my mods using Central Control but then distribute the JMD to our 11 production servers via the (DOS) COPY statement; then a file is copied to the CONTROL folder to cause Central to reload it.
    So far, I've never experienced what you are describing. Is this a common problem with you or did it start after the last time you physically changed the JMD file? If it just started there may be some mistake or weird character that you inserted that is causing the problem.

  • Ical don't save my event!!

    I don't understand why, but since 2 days, the Ical lost all my changes that I did in end january, until today. When I've quit the application, I've lost all the changes! And I came back to the old calender... Help me please! I Don't want to right again and again my events! It was not like this before, I think there's a technical problem but I don't know what to do...
    Heeeelp!

    I'm having the same problem and it's driving me crazy. I've been trying to switch over from entourage and i guess I'm not going to be able to because i don't trust ical to keep track of my information. Here is my situation: I organized my recurring events in ical, including a few calendars, a few subscription calendars and the "show birthday calendars" option. Everything was fine for a week. Then i opened ical and all my tasks and some of my events (but not all) were missing. At this point ical began to NOT save anything i entered. I would enter a test task or event and upon reopening the application the changes were not there.
    I searched the internet for help. I found no advice except deleting everything and starting over. This i did last week. I even deleted my plists etc... Now when i relaunched, I had empty Home and Work calendars and a "Entourage calendar", which i tried to delete multiple times (syncing was turned off), but I can't seem to permanently remove. It will go away if i delete it, but if i clean up the plists and library again it comes back. maybe this is the way it's suppose to work?? In any case, i finally just unchecked it. This time things seemed to work fine for a day. So i finally turned back on the "birthdays calendar", but i was still leery of subscribing to any other calendars. Things were fine again. Last night I entered my tasks again. No importing, just directly entering the info into ical. This morning I open i cal and i'm back to where i started. No tasks, missing events, and i can't seem to get any new events or tasks to save. I'm so frustrated! I hope someone can help. Thanks!

  • Unable to make changes in iCal

    I've lost the ability to make changes in iCal. Any change I make is lost when I quit and restart Ical. For example: Added event disappears, deleted task or calender reappears, unpublished calender is again marked as published. All looks fine while iCal is running and is undone when iCal is restarted.
    I can make changes in e.g. Mail, I removed tasks from Mail and they stayed removed.
    Events added in my iPhone gets added in iCal.
    /SJ

    I can't seem to find any help for this issue either. I don't have a .mac account btw. but here is what happened to me.
    I've been trying to switch over from entourage so I organized my recurring events in ical, including a few calendars, a few subscription calendars and the "show birthday calendars" option. Everything was fine for a week. Then i opened ical and all my tasks and some of my events (but not all) were missing. At this point ical began to NOT save anything i entered. I would enter a test task or event and upon reopening the application the changes were not there.
    I searched the internet for help. I found no advice except deleting everything and starting over. This i did last week. I even deleted my plists, library etc... Now when i relaunched, I had empty Home and Work calendars and a "Entourage calendar", which i tried to delete multiple times (syncing was turned off), but I can't seem to permanently remove. It will go away if i delete it, but if i clean up the plists and library again it comes back. maybe this is the way it's suppose to work?? In any case, i finally just unchecked it. This time things seemed to work fine for a day. So i finally turned back on the "birthdays calendar", but i was still leery of subscribing to any other calendars. Things were fine again.
    Last night I entered my tasks again. No importing, just directly entering the info into ical. This morning I open i cal and i'm back to where i started. No tasks, missing events, and i can't seem to get any new events or tasks to save. I'm so frustrated! I hope someone can help. Thanks!

  • How to I get a "Outcome" in WAIT task when a deeadline is missed

    Hi Experts,
    I have a WAIT task in my Workflow for which I have maintained a "Latest End"  -> End Date and Recipient. I wanted to get a mail (or some text in recipient's inbox)  in case the deadline is missed. Can some one tell why i am unable to get this? Is it possible to link the "Outcome" to "Latest End"?
    Many Regards,
    Sonu.

    Hi SS,
    did you mean that you want a separate outcome to your Step whenever deadline is missed?
    If yes, then in the Step when you give the Latest End, there is a column called Action, here you select 'Modeled', this will give you an outcome.
    Hope it helps.
    Aditya

  • Workflow task list is missing or damaged. SharePoint 2010

    SharePOint 2010 Enterprise
    Customer created workflows for the annual review of our QPC Emergency Plan.
    The document library  shows that there is a EP_Review workflow “In Progress” for each section.   However if you click into the “In Progress” link to see the actual progress of the workflow it shows no Visio diagram, it’s just a blank white
    space (not even an error message) and under the Tasks section it gives the message:
      "The workflow task list is missing or damaged.  Please contact your administrator for more information"
    I looked in the Task List and there are no tasks showing, which normally does show when we kick off a workflow. 
    I ran a report on the EP_Review workflow for Cancellations and Error messages and the system comes back with the following error message:  "Report contains no Data"
    Log says:
    3/05/2014 11:58:08.67  w3wp.exe (SLSPW02:0x8DC0)                0x8418 SharePoint Foundation          Monitoring                   
     nasq Medium Entering monitored scope (Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c)) 
    03/05/2014 11:58:08.67  w3wp.exe (SLSPW02:0x8DC0)                0x8418 SharePoint Foundation          Logging Correlation Data     
     xmnv Medium Name=Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
    03/05/2014 11:58:08.67  w3wp.exe (SLSPW02:0x8DC0)                0x8418 SharePoint Foundation          Logging Correlation Data     
     xmnv Medium Site=/sites/Compliance eaeae4dc-25b7-479e-bc20-dd98b6fcd778
    03/05/2014 11:58:08.70  w3wp.exe (SLSPW02:0x8DC0)                0x8418 Document Management Server     Document Management          
     52od Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c]. 
    Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list. eaeae4dc-25b7-479e-bc20-dd98b6fcd778
    03/05/2014 11:58:08.75  w3wp.exe (SLSPW02:0x8DC0)                0x8418 SharePoint Foundation          Monitoring                   
     b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=32.1239873194787 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
    03/05/2014 11:58:08.78  w3wp.exe (SLSPW02:0x8DC0)                0x8418 SharePoint Server              OpenXml                      
     0000 Medium OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\TEMP\AppData\Local\Temp\tmpBAE2.tmp, fcm=3) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
    03/05/2014 11:58:08.80  w3wp.exe (SLSPW02:0x8DC0)                0x8418 SharePoint Foundation          Monitoring                   
     b4ly High Leaving Monitored Scope (EnsureListItemsData#2). Execution Time=10.6167606926937 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
    03/05/2014 11:58:08.80  w3wp.exe (SLSPW02:0x8DC0)                0x8418 SharePoint Foundation          Runtime                      
     tkau Unexpected Microsoft.Office.RecordsManagement.Reporting.ReportEmptyException: Report contains no data.    at Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs
    e)     at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler
    sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
    03/05/2014 11:58:08.80  w3wp.exe (SLSPW02:0x8DC0)                0x8418 SharePoint Foundation          Monitoring                   
     b4ly Medium Leaving Monitored Scope (Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c)).
    Execution Time=131.764628890724 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
    03/05/2014 11:58:09.05  w3wp.exe (SLSPA02:0x1CD4)                0x1F68 SharePoint Foundation          Topology                     
     e5mb Medium WcfReceiveRequest: LocalAddress: 'http://slspa02.corp.questar.com:32843/5d041280466646db9f816a170ae8f6b8/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
    MessageId: 'urn:uuid:8f54c63f-a3d4-4180-b9be-2eefe9ff3495' 01f77dd7-96fb-4f20-b72a-cd736a3354bf
    03/05/2014 11:58:09.05  w3wp.exe (SLSPA02:0x1CD4)                0x1F68 SharePoint Foundation          Monitoring                   
     nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 01f77dd7-96fb-4f20-b72a-cd736a3354bf
    03/05/2014 11:58:09.05  w3wp.exe (SLSPA02:0x1CD4)
    Any Ideas how I can figure out how to resolve this?
    Thanks for any input

    Hi mikeatquestar,
    it seems you may need to check if should the task able to create at your environement,
    you may try this at your development environment first:
    Saved a task list as a template from a working site collection and moved the template to the problem site collection. Used this template to create a new list, and associated this list to the Workflows task list.
    http://office.microsoft.com/en-us/windows-sharepoint-services-help/manage-list-templates-HA010099156.aspx#BMcreate
    http://office.microsoft.com/en-us/sharepoint-server-help/copy-or-move-a-list-by-using-a-list-template-HA101782479.aspx
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

    Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
    I’ve tried several ways to fix these issues with no success.
    I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
    WHEN OPENING BIDS:
    I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
    . They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
    ONCE BIDS IS OPEN:
    No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
    TITLE: Microsoft Visual Studio
    There were errors while the package was being loaded.
    The package might be corrupted.
    See the Error List for details.
    BUTTONS:
    OK
    . . . and these errors in the Error List at the bottom of the IDE:
    Error      1             
    Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
    for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". 
            C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx   
    1               
    1             
    Error      2             
    Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". 
            Package.dtsx    
    0             
    0             
    Error      3             
    Validation error. Execute SQL Task : There were errors during task validation. 
       Package.dtsx    
    0             
    0               
    Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
    The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
    Microsoft.SqlServer.SqlCEDest.dll
    Microsoft.SqlServer.Management.CollectorTasks.dll
    Microsoft.SqlServer.SQLTask.dll
    System.Data.SqlServerCe.dll
    Microsoft.Synchronization.Data.SqlServerCe.dll
    (above dll repeated at bottom of message)
    After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
    as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
    If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
    items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
    In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
    and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
    out either).
    After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
    files or information you may require.
    CBS

    try: Devenv.exe /ResetSettings
    http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
    Or try this (it's for 2005, but maybe it works for 2008 aswell):
    http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
    or try
    http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
    "You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files.  I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
    without warning"
    Please mark the post as answered if it answers your question | My SSIS Blog:
    http://microsoft-ssis.blogspot.com |
    Twitter

  • Extended notifications: Missing tasks in SOST

    Hi!
    I've configured extended notifications via SWNCONFIG, including different task filters. When I execute the SWN_SELSEN report, a range of notifications is represented in SCOT. However, when I run SOST, I'm missing notifications on two tasks. Tasks that are used in decision steps in the workflows are represented, but the two tasks that are used in activity steps in the workflows are missing. Why is that?
    Best regards,
    Martin Aabo

    Hi Martin,
    Check these sites ,
    http://help.sap.com/saphelp_nw04/helpdata/en/27/9a793426cea749b18fa409565c3dee/content.htm
    http://help.sap.com/SCENARIOS_BUS2007/helpdata/EN/45/ac741f89522e78e10000000a155369/content.htm
    http://www.erpgenie.com/mysap-crm/924
    By
    Pari

  • Some fields are missing in Current Task - Designer Workflow Approval Task Process

    Hi All,
           I am using approval task process activity in designer workflow. When i go to the single task behaviour page, some fields are missing under Current Task Source.
    Some missing fields are :
    1. Assigned To
    2.External participants
    3. Form Urn
    I am trying to get the above fields but not available. What could be the issue?
    Puli Bala

    Hi Puli,
    I think your task list is corrupted, could you please try to associate your workflow to another task list in SharePoint Designer > Click Workflows on left navigation > Click to open your workflow > Under Settings section, select another task
    list and test.
    Thanks & Regards,
    Emir
    Emir Liu
    TechNet Community Support

Maybe you are looking for