Task out empty?

Hi,
I don't want to use the MAX to create an global channel/Task. I want the RT system to create the internal task and use it programatically. There should be no trace in the MAX at all.
Previously, I used to do the following under RT 7.x:
Initialize early in the VI execution:
create a DAQmx Task / Create channel
then have the DAQmx Start task execute.
I would usually take the  Task out reference and store into an Indicator.
then, within my VI's whenever I need to toggle a few Digital bits, I would use the Reference Indicator and just use DAQmx Write.
However, this is not working because the task returned out is always empty  and get an error -200428 (Invalid task or virtual channel)
I noticed in a seperate VI that if I don't use an indicator and just wire in to the Task In directly it works. Why am I not able to store it into an indicator?
Regards,
Ashm01

ashm01,
    In LV
8, you can use the project to create a Project DAQmx Channel. You can then use
Variable to bind to that channel to read and write your data. This channel will
not show up in MAX unless you export it to MAX. You can deploy the channel and
the variable to the Target or to the host.
I hope this helps.
-Lorenz

Similar Messages

  • Empty task out from DAQmx Create Virtual Channel (VI)

    Hi, 
    I'm using a NI USB_6008 in my project and I use ao0 to provide my device with supply-voltage. And I use ai1 to measure voltage on my device. The thing is that I have been using another identical USB_6008 before, and everything worked just fine, but now when I want to use this new DAQ, it doesn't work at all and I get "empty" or "unnamed" task out. I have the right serial-number and device-number in my hardware initiation. And I have used the test panel in    "Measurement & Automation Explorer to check that the channels works properly. I have also changed the USB-port and also updated my drives. But nothing has helped. 
    Unfortunately I can not send the code here since it's too big and complicated but I'll attach a screen-shot of the part the I'm stucked in with the "probe" values. 
    I'll really appreciate it if someone could explain for me why I get "unnamedTask". 

    Just came across this while looking for something else.
    Your tasks are unnamed because you haven't named them .  You can name your task when you call DAQmx Create Task.vi:
    In the case of the first VI, the task is being implicitly created when the channel is created, so an "unnamed" task is the result.
    Best Regards,
    John Passiak

  • Warning: Leaving out empty argument '-windowtitle'

    When I generated a javaDoc for my project I received the following
    Warning: Leaving out empty argument '-windowtitle'
    Could someone please explain to me what is that warning and how to fix it?
    Thanks in advance

    I too am generating my javadoc files from Netbeans and I get the same message. However, my javadoc is generated fine, so my advice is not to worry about it!
    The documentation says:
    -windowtitle
    Specifies the title to be placed in the HTML <title> tag. This appears in the window title and in any browser bookmarks (favorite places) that someone creates for this page. This title should not contain any HTML tags, as the browser will not properly interpret them. Any internal quotation marks within title may have to be escaped. If -windowtitle is omitted, the Javadoc tool uses the value of -doctitle for this option.

  • Task out with a shift register using ULx

    This post below describes my same problem of passing a task through a case structure but they are using the DAQmx Library and it has a CreateTask.vi which the ULx Library doesn't have.
    http://forums.ni.com/t5/LabVIEW/passing-DAQmx-task-out-through-a-shift-register/td-p/410447
    Any suggestions as to how to get my task out through the shift register?
    Thanks
    -CC
    Solved!
    Go to Solution.

    I have never had a problem getting ULx task out of shift register.
    This is an action engine that I use to store the ULx tasks ref to use later in the code.
    Omar

  • Differential backup cleanup tasks leave empty files behind

    Hello,
    I have a full backup done weekly and then differential backups every 4 hours. Both backups are followed by cleanup tasks. Full backups and cleanup tasks run with no problems and so do differential backups too and their cleanup tasks, but sometimes differential
    backup cleanup leaves behind empty files (0 bytes in size).
    I checked the logs, and differential backup tasks are completing succesfully and I can see the backup files being created too and being cleaned up too, but sometimes there are empty backup files left over. I had the same issue while using SQL Server maintenance
    tasks and Ola Hallengren's SQL Server Maintenance Solution. I tried googling and asking Ola too but couldn't come up with a solution.
    Has anybody else had anything like this happenning or has any idea what might be causing this?

    Hello,
    A 0 byte file generally means there was a problem with whatever created it. Maintenance plan cleanups check the file header to see if it's a SQL Server backup file. If it isn't, it won't delete it thus the reason why it's "left behind". figure
    out why the files are created as 0 bytes and if that can be fixed, there will be no cleanup issue.
    -Sean
    The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

  • How to list out Empty users in system schema

    Can any one help to list out only empty users in system schema?
    Edited by: leen on Jul 24, 2012 11:34 PM

    Osama-mustafa wrote:
    EdStevens wrote:
    Osama-mustafa wrote:
    thank you
    in this case if i use count like below :
    select 'select ''' || table_name || ''' from ' || table_name || ' having count(*) = 0;' from user_tables;
    its suppose to work right ?I don't know. What did you get when you tried it?
    And we still don't really know what the OP thinks he wants. He posted a rather vague and confusing "requirement" and people started jumping in with solutions without finding out the problem.Yes its did , but like you said we need solution.Before we can offer a solution, we need to know the problem, which the OP still hasn't been able to articulate.

  • Query to find out empty records

    Hi experts,
    I want to find out those tables in my databases which does not have any records or data. I have many tables in my databases which are totally empty. Please help me to build a query . Which database view i should access to find out the tables with empty records? Please help.

    Hello,
    Just pass the user list you want to count and not admin users or other default users.
    SELECT owner, table_name, num_rows
          FROM dba_tables
          WHERE owner IN ('MYUSER','OTHERUSER');or this
    DECLARE
       CURSOR mycur
       IS
          SELECT owner, table_name, num_rows
          FROM dba_tables
          WHERE owner NOT IN ('SYS', 'SYSTEM', 'SYSMAN', 'OUTLN')
                AND iot_name IS NULL;
       v_sql     VARCHAR2 (100);
       v_count   NUMBER := 0;
    BEGIN
       FOR cur IN mycur
       LOOP
          v_sql     := NULL;
          v_count   := 0;
          v_sql     :=
             'select count (*) from ' || cur.owner || '.' || cur.table_name;
          EXECUTE IMMEDIATE v_sql INTO v_count;
          IF (v_count = 0)
          THEN
             DBMS_OUTPUT.put_line(   'Table name = '
                                  || cur.table_name
                                  || ' rows '
                                  || v_count);
          END IF;
       END LOOP;
    END;Regards

  • Human Task in Empty Process

    Hi Guys!
    Can someone tell me how to create a Human Task in an empty project?
    These are the problems i m facing:
    1. I dont have any schema in my process so i cannot choose the task parameter
    2.If i choose initiateTask from workflow.xsd as the task param then the task jsps are not generated
    3.If i create a variable from a schema and use it then it will say unresolved variable ..make sure it is in any of the WSDLs referenced..
    4.Morever i can't import the schema which initiates the process as it has some imports and jdev says problem building schema
    Any suggestions as how to go about this?

    Well you must understand what the 'sync' part in your process is.
    if you have a process with is sync and in it you put a human workflow which will give his callback like 3days later before your own process gives the reponse back to the caller, how do you want to communicate this to the caller ?
    normally you use a sync process which will give the response back in a few moments, so the caller can wait on it, he won't wait on it for 3days.
    so for you the question, whats the reason why it needs to be sync, what do you want to do with the response (even if it's getting back to you after 3days)
    if it's after 3 days, why not just make the process async and put the response on for example a queue

  • Substring function giving out empty fields

    I am using OAS 10.1.3v . I have a problem with the substring function in the BPEL functions. In 10.1.2v , all the xpaths with substring functions gave out data.
    But in 10.1.3v, all those nodes are seen empty. Is there any particular reason for this ?
    Is this a problem of any particular jar file ? I am using xalan 2.7.0 along with this, for custom functions.
    Also, in which class, inside the jar file, is the substring function defined ?

    Try wrapping the substring function in a @member function. You need the ruturn of a member name not a string. Look at the example of @member in the technical reference for more details

  • DNSMaint not clearing out empty records

    NW65 SP8 .DNSmaint.nlm version is 1.0 2004. We are trying to get this
    process to work. all of the parameters are set correctly and the utility
    runs. there are no errors but also none of the empty records are clearing
    out. here is the command we are using. The user created for this process has
    full rights. The partition in question has a read / write.
    load
    dnsmaint -User:dnscleaner.ccps -PASSWORD:xxxx -ZoneList:.tt_calvertnet_k12_md_us.TechTrailer.CCPS
    load
    dnsmaint -User:dnscleaner.ccps -PASSWORD:xxxx -ZoneList:.21_10_IN-ADDR_ARPA.TechTrailer.CCPS

    CCPS,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • To find out empty tables in a database

    Hi all,
            I have a database which gets its daily feed from a ftp file. Now is there any way i can figure out the empty tables in the databese which doesnot get any data on the feed.
    Thanks in advance,

    That's a cool little function.
    In case it ever DOES go away in future versions of SQL Server, this will do the same thing:
    --Here is the command template:  
    declare @cmdtemplate nvarchar(500)  
    set @cmdtemplate='if exists(select * from ?) print ''Table ? is not empty.''' 
    --Set up the batch of commands, one for each table, substituting ? for the table name:  
    declare @cmdbatch nvarchar(max)  
    select @cmdbatch=coalesce(@cmdbatch+'; ','')+replace(@cmdtemplate,'?',TableName)  
    from (select quotename(Table_Schema)+'.'+quotename(Table_Name) as TableName  
          from INFORMATION_SCHEMA.TABLES  
          where Table_Type='BASE TABLE') as q  
    --Execute that batch of commands:  
    exec sp_executesql @cmdbatch  
    --Brad

  • I can't print web pages since a recent upgrade to 4.01. The print command works but the page comes out empty. right now a copy the link to IE and print from there. HELP!

    When printing from the mozilla 4.01 browser the printer spits out blank pages. It seems like it happened after downloading and running mozilla 4.01 browser.
    I have to copy the link to IE (boo!) to print the coupon or page on my printer.
    Why?

    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
    *https://support.mozilla.org/kb/Private+Browsing

  • Aperture3- How do I clear out empty libraries in Aperture 3?

    I have managed to create several libraries which are empty or, in one case, have one photo.   How can I clean up libraries and get rid of the useless ones?
    I have tried deleting to no avail.  Two books I've consulted are no help.

    Scott,
    As for as I know, it stands for Aperture Library.  Such a library is a package of many files and folders, and complex in structure.
    Ernie

  • Daily task list empty on upgraded mailboxes

    In our network the Exchange and Outlook versions have been upgraded to 2010 versions.
    On New created mailboxes the Daily Task List works as it supposed to.
    On Old mailboxes the Daily Task List does not show any tasks, even though they where visible on their before the upgrade from Outlook 2007.
    Any support is welcome.
    Thanks
    Erik De Bondt

    Hi Erik,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Filling out empty space with a div

    http://www.elliotnewman.com/index/test5.html
    Is there a way to automatically fill the space between the two divs: "news" and "basket" with the div "spacer" ? "news" is floating to the left, and "basket" is floating to the right, so I just want the "spacer" to fill this gap.

    Forgive for me for saying this, but your code suffers from a common newbie syndrome called "division-itis"  a tendency to wrap every single page element inside its own division.  This is counter-productive.  You shouldn't use ID except for top level elements such as #header, #navbar, #content, #sidebar, #footer.  Everything else should fit inside one of those divisions.
    IMO your menu would be so much better if you simplified it and used an unordered list instead of all those divisions.
    <ul id="navbar">
    <li><a href="#">HOME</a></li>
    <li><a href="#">ABOUT</a></li>
    <li><a href="#">GALLERY</a></li>
    <li><a href="#">VISUAL EFFECTS</a></li>
    <li><a href="#">PRINT SALES</a></li>
    <li><a href="#">NEWS</a></li>
    <li><a href="#">CONTACT</a> </li>
    </ul>
    Then simply style your list to float:left and remove bullets like so.
    /* BEGIN HORIZONTAL DROP-MENU */
    #navbar ul{
    margin: 0;
    padding:0;
    #navbar li {
    list-style: none;
    font-size: 12px;
    float: left;
    /**LINK STYLES**/
    #navbar li a {text-decoration:none; display:block;}
    #navbar li a:link {color: #CCC}
    #navbar li a:hover,
    #navbar li a:active,
    #navbar li a:focus {color: #FFF; background: #333;}
    You can see a working example here (look at the code to see how it comes together)
    http://alt-web.com/DEMOS/CSS2-Horiz-Drop-Menu.shtml
    Hope this helps,
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

Maybe you are looking for

  • Changing action name of sample custom action block in MII 12.2

    Hi all, I have a problem changing the action name of the custom action block sample. I've changed the content and successfully implemented the action block. But when I changed the action name and uploaded again, the action block cannot display any in

  • "Windows Authentication Mode" when SQL Server 200 and CF on different machines?

    Hi All, I am playing for two days with following problem. And still I did not able to get rid of it. I have installed SQL Server 2000 on machine which is my server (windows 2003 server) and this machine is my domain controller. I have user "ABC" user

  • Problem with customer exit EXIT_SAPLL03A_002:

    hello all , i have to write some code in the customer exit 'EXIT_SAPLL03A_002'. this customer exit will trigger while creating a transfer order using LT01,LT02 or LT03 transaction . the standard program for all these transactions is SAPML03T . The cu

  • Toggle Layers Visibility Animation in Pre-Comp

    Hi, I want to make a pre-comp with 2 mouse-pointer images, the one has the normal state, the other image has teh pressed pointer state. Now in a parent layer it'd be wonderful if I could use this pointer-pre-comp and when ever I want to show a presse

  • ITunes 11 NEVER prompts for proxy authorisation

    I upgraded to itunes 11 and now I can never reach the itunes store. previous it used to promt for proxy authoirsuation twice and now it does not prompt for anyting! it seems that iTunes 11 does not have any proxy support at all! Can someone else comm