Warning: Leaving out empty argument '-windowtitle'

When I generated a javaDoc for my project I received the following
Warning: Leaving out empty argument '-windowtitle'
Could someone please explain to me what is that warning and how to fix it?
Thanks in advance

I too am generating my javadoc files from Netbeans and I get the same message. However, my javadoc is generated fine, so my advice is not to worry about it!
The documentation says:
-windowtitle
Specifies the title to be placed in the HTML <title> tag. This appears in the window title and in any browser bookmarks (favorite places) that someone creates for this page. This title should not contain any HTML tags, as the browser will not properly interpret them. Any internal quotation marks within title may have to be escaped. If -windowtitle is omitted, the Javadoc tool uses the value of -doctitle for this option.

Similar Messages

How to set the limit for the warning 'running out of disk space'

I am wondering if there's a way to set the number of GB before I get the system warning 'running out of disk space'.
I saw this question asked in 2010 and it did not get an answer. It was archived so I am asking again. I know how to monitor the available space on my startup disk, and how to empty the trash to clear up disk space. I am looking for an OS X setting that I can change.

My guess is that you want to lower the limit. IMHO I think the limit is alreay too low.
If you are seeing this warning regularly then your disk is severely overfull and needs to be replaced with a larger one.
Running the free space low eenough to get the warning greatly increases the chances for disk corruption. Once the disk gets corrupted then then next thing that happens is data lose.
You have a serious problem with your Mac that should be dealt with immediately.
Backing your data up would also be a good idea if you are not already doing that.
Allan

How can I leave an empty row?

Hi,
If I want to use GridBagLayout, how can I leave an empty row? Or empty column? When I create the buttons on a frame, are they created sequentially? so Is that mean I can't put something back to the first row later in the program? Thx.
Adrian

I'm just guessing, since I havent done Java for a long time... but if you want an empty row... what pops up in my mind first is like putting in an empty JLabel/Label... for that row... but then if you wanna fill it in... i dunno...

Duplicate Finder Items, but leave out a folder

Okay, this is probably way over Automator's head, but I figure I'd give it a shot.
I have a folder (Let's say it's called FolderA). Inside FolderA is a bunch of other folders, (for simplicity let's say it's A1, A2 and A3) and those three folders have files inside of them.
What I want to do is duplicate FolderA, but leave out the contents of A3, but I still need a folder called A3 inside this duplicate FolderA. Is this possible?
So, it will go something like this:
FolderA
- A1 > Files
- A2 > Files
- A3 > Files
What I want Automator to do is duplicate FolderA as such:
FolderA copy
- A1 > Files
- A2 > Files
- A3 >

As I am dealing with very specific folder structures, the FolderA structure will always be the same. Actually, there will ALWAYS be six folders in FolderA and they are always named the same (lets say A1-A6). What I want is ALWAYS A3 to be duplicated without it's contents (the contents will be replaced at a later time with a different version of the files).
So, it will look something more like this:
FolderA
A1 > Files
A2 > Files
A3 > Files
A4 > Files
A5 > Files
A6 > Files
and dupe should look like:
FolderA copy
A1 > Files
A2 > Files
A3 >
A4 > Files
A5 > Files
A6 > Files
Does that make sense?

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

I bought pdf converter pro but when i convert to excel it only converts the columns with figures leaving out the columns with quantity descriptions

i bought pdf converter pro @$29.99 but when i convert to excel it only converts the columns with figures leaving out the columns with quantity descriptions

Contact the vendor of the product for support.

Expression.getFunctionWithArguments() adds additional empty argument...

Hi; I'm trying to use the Expression.getFunctionWithArguments() method to include the Oracle db function bitand() in a query. It seems that getFunctionWithArguments() always includes an extra ',' at the front of the argument list, here's an example of the SQL that is created;
SELECT t0.CLASS_NAME, t0.DESCRIPTION, t0.EDITABLE,
t0.ID, t0.DATE_MODIFIED, t0.DATE_CREATED, t0.MODIFIED_BY,
t0.ACL_ID, t0.NAME, t0.CREATED_BY, t0.TYPE_ID, t0.WKSP_ID,
t1.ID, t1.NAME
FROM XDOOBJECT t0, ALL_OBJECT_PRIVILEGES t2, ACL t1
WHERE (((t1.ID = t2.xdoobject_id)
AND ((t2.user_id = 'twatson2')
AND (bitand(, t2.privilege, 2) = 2)))
AND ((t1.ID = t0.ID)
AND (t0.CLASS_NAME = 'oracle.xdo.server.security.authorization.model.ACL')))
Notice the "AND (bitand(, t2.privilege, 2) = 2)))"
Here's my code that sets up this portion of the expression;
Expression exp1 = parentEb.getTable("ALL_OBJECT_PRIVILEGES")
.getField("xdoobject_id");
Expression exp2 = parentEb.getTable("ALL_OBJECT_PRIVILEGES")
.getField("user_id");
Expression exp3 = parentEb.getTable("ALL_OBJECT_PRIVILEGES").getField("privilege");
Vector args = new Vector();
args.add(exp3);
args.add(READ_PRIVILEGE_VALUE);
Expression exp4 = parentEb.getFunctionWithArguments("bitand",args).equal(READ_PRIVILEGE_VALUE);
Expression exp = parentEb.get("ID").equal(exp1)
.and(exp2.equal(userId).and(exp4));
I've tried adding additional arguments to the Vector just to see what it does and it always has the extra empty argument.
Thanks for you help with this.
-Tim Watson

Hi Tim,
It seems this method requires a base, which is t2.privilege in your case. You need to call getFunctionWithArguments() on the base. So your code should be something like:
Expression exp3 = parentEb.getTable("ALL_OBJECT_PRIVILEGES").getField("privilege");
Vector args = new Vector();
args.add(READ_PRIVILEGE_VALUE);
Expression exp4 = exp3.getFunctionWithArguments("bitand",args).equal(READ_PRIVILEGE_VALUE);
Shannon

How to make JDev leave out data-sources.xml

Greetings
I would like to have jdeveloper leave out data-sources.xml. I have my test server setup with all the data-sources so this isn't needed. All it does is create bunches of data sources on my server then I go in and delete them.
Is there a way somewhere in jdeveloper or my deploy profiles were I can tell it to leave this file out so it just uses the ones I have already setup on the server?
thanks
troy

I think you can control this by going to tool->Embedded OC4J Preferences->Data sourcesI think the original author meant to ask for a way to exclude data-sources.xml when deploying to an external application server.
So far the only way I've found out to work is to manually blank the 'dataSourcesPath' field in "Configure Application" dialog before actual deployment takes place.

Leave out specified columns when making source ODBC connection to Access?

Hello,
I have question. I am making Non Oracle ODBC connection to Access file and then of course the Import of the tables from the Access file in OWB 10.2.0.1. Is it possible to choose and leave out (omit) some columns from the tables during this process? You may suggest that I should make connection to the whole table as it is and then leave out the unnecessary columns during mapping to the target table. But the problem is that these columns I would like to leave out are represented as LONG datatype which is not supported by Oracle (ORA-00997 problem). The result is that the tables with this datatype are "somehow imported" but it is not possibe to open them in Data Viewer (ORA-00997 message) and it is not possible to use them in Mapping editor (API8014 message). So, is it possible to choose only several columns from the Access table when making the ODBC connection to it and the Import of the tables to Non Oracle / ODBC / "eg. My Access" / Tables ?
Thanks a lot!
Jan

OK,
the first reply will be from me :)
Now I found a solution which is not so elegant but works for me.
My task was to make the connection and loading the data from Access to Oracle without any modification to the original source file (which is of course normal DW condition...).
I created another Access file linked to the original one (no copy, only linkage, it means every change to the original file are immediately seen in the second one). It was not still possible to make changes to the attributes in this link file, so i created views (in Access called queries) of all the tables and here I left out unnecessary columns.
Then I changed my ODBC connection link to the second file instead of first and tried to do it all the tasks in OWB... it works, I can see the data and I can use the views in mappings and so on...
but if any one knows the solution just for OWB as I asked before, please let me know!!!
Jan

Let's say I have a document that is 5 pages long. Now I want to insert the page numbers, starting on page 3 with the number "3" and leaving out pages 1 and 2. How do I do that?

Let's say I have a document that is 5 pages long. Now I want to insert the page numbers, starting on page 3 with the number "3" and leaving out pages 1 and 2. How do I do that?

I just found the answer myself. I don't know how to delete my question, so I'll just write the reply to the answer - just in case somebody needs to know: Insert a section brake after the second page and then choose "Start on 3".

I can't sync my music in itunes, itunes leaves out some musics in some playlist.

I can't sync my music in itunes, itunes leaves out some musics in some playlist. For example, Even though a playlist have 9 music, itunes copies just one of them to my iphone.

I'm only trying to sync 350 songs. When I click "sync" the process will start but it won't end in my iTunes. My iPhone's sync symbol dissapears and the sync symbol in iTunes in my PC is still there. The sync process that consits of 5-7 steps won't finish the last step and keeps "downloading Safari secure browsing data" (I don't know if this translation is correct, I'm Spanish and iTunes is set up in Spanish too)
I've tried turning off Wi-Fi because some people got rid of this problem this way supposedly, but it didn't work at all

Find out method argument values at run time

Hi,
I am looking to find out the argument names and values of a method at run time. (This would allow for instance to automatically log argument names and values without writing tedious code).
The following thread did not seem to answer this problem
http://forum.java.sun.com/thread.jspa?forumID=4&threadID=411455
Any suggestions welcomed
Ben

As there is no Method-Object representing the current method call, I doubt you will get hands on the arguments passed to the method other than referencing them or building a framework "on top" (as, e.g., AspectJ). Also, Method in reflections does not hold the names of parameters, so it will be difficult to automatically print information on more than the signature.
The following is a not very robust, little play-around code for logging. Maybe it delivers enough information for some situations:
public class Test {
    void test(String arg0, int arg1) {
        log(new MethodGetter(){}.get(), arg0, arg1);
    public static void main(String[] args) {
        new Test().test("zero", 1);
    public static final void log(Method method, Object ... args) {
        final StringBuilder builder = new StringBuilder();
        builder.append(method.getDeclaringClass().getSimpleName()).append('.');
        builder.append(method.getName()).append('(');
        final Class<?>[] parameterTypes = method.getParameterTypes();
        for (int index = 0; index < parameterTypes.length; index++) {
            if (index > 0) {
                builder.append(", ");
            builder.append('(').append(parameterTypes[index].getSimpleName()).append(") ");
            if (index < args.length) {
                builder.append(args[index]);
            } else {
                builder.append("null");
        builder.append(");");
        System.out.println(builder.toString());
    public static abstract class MethodGetter {
        public Method get() {
            return getClass().getEnclosingMethod();
}It will print the following:
Test.test((String) zero, (int) 1);
Note that MethodGetter and log and main are enclosed for test purpose only.

Iweb is leaving out photos when I publish...

iweb won't publish all the photos in an album. It is leaving out any new images I am trying to add. Blank spots for some and question marks for others. Any ideas? Thanks.

Publish your site to a folder on your hard drive and check it locally with Safari to see if the photos are present. If they are then we know it's an uploading issue. It they are not in the local version it's an iWeb issue.
Have you tried the File ➙ Publish Entire Site menu option?
OT

When I autofill in Safari, it leaves out Postcode

When I autofill in Safari, it asks me if I want to auto-fill, I say yes, and it leaves out the Postcode (UK)...
Is there a way to make or trick it into including the Postcode field?

21 Trinity Road, Wimbledon, SW19 8QT
I used to live there.
The contact card in the Contacts App looks like this:
21 Trinity Rd
Wimbledon
SW19 8QT
United Kingdom
Could it be because sarafi is looking for a field called Zip Code or some such? Is there a way to trick Contacts/Safari into to doing the right thing?

XQuery Mapper - leave out tags with empty values, how to?

Hi everybody,
I am using the XQueryMapper to map 2 XML schemas and get an output for a Webservice but I am unable to get rid off the tag elements that are empty (i.e. there is no content within the tag).
For example:
If my output is:
<customer>
<first_name>John</first_name>
<last_name></last_name>
<title></title>
<company>1BRN</company>
<customer>
What I would like to obtain is:
<customer>
<first_name>John</first_name>
<company>1BRN</company>
<customer>
What do you have to do to avoid that? If I do NOT use XQuery then that happens as a default behaviour.
Unfortunately I have to use it.
Cheers,
Manuel Silva

I found the solution to the problem. To avoid getting tags with no content the way to do it is defining properly your schema. Just adding minOccurs="0" if the element is optional, when it returns with no content, it does not come up in the output.
<xs:element name="order_type" minOccurs="0" maxOccurs="1" type="xs:string"/>
XQuery builds different constructs behind the scenes depending how your elements are defined.
Cheers,
Manuel
Message was edited by manuel.silva at Aug 27, 2004 1:58 AM

Warning: Leaving out empty argument '-windowtitle'

Similar Messages

Maybe you are looking for