Task Outcomes with spaces

Hi ,
We have a problem when trying to generate an ADF based on Human task definition template when trying to generate the Human Task display from ,the problem is when the task contains a n outcome with space(ex. 'A B C' ) we got an error with the binding.
the same outcomes operates from the worklist action menu but when clicking the Action buttons from the form we got the error.
can any body helps in this issue.
Thanx.
Edited by: arababaah on Sep 12, 2010 11:38 PM

I've run into problems trying to do this as well.
As a workaround, I just altered the outcomes to not use spaces and after generating the task form just went into the .jspx file and altered the "text" attribute of the generated af:commandToolbarButton to have whatever label we want for the button, including the spaces. This way the user will see whatever text on the button you want to show, but the bindings and engine will use the more normalized version without the spaces.

Similar Messages

Backup task failed with exit code -1

Hello all.
I have not been able to backup my Daylite database for almost 2 weeks. This is the error I am getting: "backup task failed with exit code -1"
I have a Mac Mini Server running 10.7.1 . I have plenty of disk space available 140GB and the Daylite database is about 1.7GB.
I had a corrupt disk and repaired it w/ disk utility and also verified/repaired permissions. I have tried backing it up to another location with no luck.
Anyone had a similar problem ??

until you delete the previous version in zlm and do a rug ref... or is this as designed
When you make changes to the bundle you need to apply them. That creates a new version and then you need to deploy that new version. Apply and deploy are on the same page. But I guess you know that.
If you already did that and still had problems, it might be the zen loader that needs a little bit more time. Once you hit deploy, a zen queue entry gets created that informs the zen loader to update the bundle xml file in the file repository. That file is delivered to the managed device when it queries for bundle information. So if that bundle xml contains the old version, the client will see that.
Problems here can be that the zen loader simply needs a few seconds longer then when you change to the device and run rug ref. Or there can be other queue entries that get processed and the bundle xml update is just in the queue and waiting. The zen loader has 5 slots for processing queue entries.
On the zlm server you can run "zlman ql I" for in progress entries and "zlman ql N" for new state entries that ned to be processed.
Or you can use the short script I posted (Cool Solutions: Monitor ZLM queue entries with Nagios) that shows you in one line how many and what type of queue entries currently exist. This is what I always use to get a overview about the queue status.
Rainer

Problem with Spaces that started with Snow Leopard

I've noticed two problems with Spaces that have arrived since switching to Snow Leopard... First, if I am in say Space 1 where I use Safari and I then want to move over to an open application, say like Excel, that I have running in Space 4, there are a number of ways to get there but one way I used to use all the time was to move down to the Dock and simply single click on the open Excel application and that would immediately switch me over to Space 4 and whatever Excel documents were already open there... Now, since switching to SL, a single click of whatever application in the Dock makes that application active in the Finder (you see its name appear in the upper left of the menu bar) but otherwise nothing happens... You then have to click a second time and then you switch over to Space 4... It's not really a double click because that implies to clicks closely spaced in time... For this, you can click once, leave the room, come back, click a second time and you will now switch to the alternate space where the open application is running... That is clearly different than it was under Leopard and I would suggest that it is a bug because there is no value in the outcome of that first click... It highlights the switched application but doesn't actually switch to it until you click a second time...
Second, and this one is worse, if you say launch Excel (which you want to open in Space 4) while you are in Space 1, Excel will open and switch over to Space 4... So far so good... But now, with Excel open over in Space 4, if you are now back and working in Space 1 and while there you use the Finder to go to some other, currently unopened, Excel file and request that it open, it should switch over to Space 4 and open that file but instead it opens it wherever you are, in the case mentioned here, in Space 1... So now you have Excel files opened both in Spaces 1 and 4... Clearly a bug... Spaces had some similar issues in a few early versions of Leopard but they eventually got it working... Now it appears Spaces has regressed somewhat in SL... I love spaces and use it all the time... Hope it gets fixed soon... thanks... bob...

Hi... I have since learned that the first paragraph of my original post where I say,
"I've noticed two problems with Spaces that have arrived since switching to Snow Leopard... First, if I am in say Space 1 where I use Safari and I then want to move over to an open application, say like Excel, that I have running in Space 4, there are a number of ways to get there but one way I used to use all the time was to move down to the Dock and simply single click on the open Excel application and that would immediately switch me over to Space 4 and whatever Excel documents were already open there... Now, since switching to SL, a single click of whatever application in the Dock makes that application active in the Finder (you see its name appear in the upper left of the menu bar) but otherwise nothing happens... You then have to click a second time and then you switch over to Space 4... It's not really a double click because that implies to clicks closely spaced in time... For this, you can click once, leave the room, come back, click a second time and you will now switch to the alternate space where the open application is running... That is clearly different than it was under Leopard and I would suggest that it is a bug because there is no value in the outcome of that first click... It highlights the switched application but doesn't actually switch to it until you click a second time... "
...that turned out to be my mistake... In another post someone pointed out that in Spaces preferences you must have checked ON the preference that says,
"When switching to an application, switch to a space with open windows for the application"...
I had been playing with a number of things trying to figure out what was going on and somewhere in the mix had switched that off... (It is on on all my other computers and I'm sure it originally was on this one too)... When I switched it back on the above described problem went away... So that was my fault...
But the second part,
"Second, and this one is worse, if you say launch Excel (which you want to open in Space 4) while you are in Space 1, Excel will open and switch over to Space 4... So far so good... But now, with Excel open over in Space 4, if you are now back and working in Space 1 and while there you use the Finder to go to some other, currently unopened, Excel file and request that it open, it should switch over to Space 4 and open that file but instead it opens it wherever you are, in the case mentioned here, in Space 1... So now you have Excel files opened both in Spaces 1 and 4... Clearly a bug... "
...is a real problem... I fired up my G4 (power pc) that runs Leopard, 10.5.8, to see whether it behaves the above way or not and it does NOT... It works as one would expect.. So at least later in Leopard, the above mentioned problem was not present but it is in this first incarnation of Snow Leopard...
To me, the utility of Spaces is all about keeping a single desktop from being cluttered with many open applications/files and to now have an application that opens in whatever space you happen to be in after it is first opened in its "correct" space sort of defeats the idea behind Spaces... I am currently trying to train myself to first hit <command><4> (my Excel space) before opening a second or subsequent Excel document to prevent it from opening somewhere where I don't want it to be...
Again, I hope Apple sees and fixes this... I did submit an "Apple feedback" item for this issue... thanks... bob..

User task outcomes

I'm trying to design a workflow with the following scenario:
A task is defined with say, three outcomes(conclusions) A, B, C. So when the task is initially assigned to an individual, they have the option to choose one of the three. If they were to choose A, I want to reassign the task to another individual and present them with a new set of outcomes say, D, E, F.
I can't see how I can do this. I was thinking of defining the task with all outcomes A-F, however, how would I filter the outcomes to display only the relevant ones? I haven't seen any examples that do something similar.
Any suggestions?

bcaldwell,
Above 2 options are the suitable approach.
Option of using separate human task process with different set of outcomes looks easier and won't involve any code change, but might be a bit low on the performance side in terms of use of extra human tasks processes.
On the other hand, using the API to code the same based on runtime selection will involve the coding but it will be a performant approach and a better one audit wise too.
--Shiv

Replacing comma with space

Hi,
Note : I am using SAP 4.6
Task      : Replace Comma with space
Problem : Not able to replace comma with space
I have task where I have to write result file to application server, when I am writing string to application server it is separating by comma, for example if you take below statement it is dividing by space that means in first column PO and then ITEM etcu2026.
MOVE 'PO ITEM is not there in table EKPO' TO W_RECORD_OUT-ERROR_MSG.
so to resolve this situation I have used below code for now, I know I can use
REPLACE ... ALL ENTRIES but this statement is not working in SAP 4.6
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
appreciate if somebody can help me.
Thanks
sarath

Hi,
Please check the below code.
REPORT YSAT_TEST.
Data: Var1(40) type c value 'Test1,Test2,Test3,Test4'.
break-point.
REPLACE ',' WITH space INTO Var1.                   " It will replace only first occurrence
replace all occurrences of ',' in var1 with '   '.
CONDENSE Var1 no-gaps.
write: var1.

Task Outcome buttons disapeared

Hello
I created new custom content type with "Workflow Task (SharePoint 2013)" content type as its parent, I removed in my new custom content type default task outcome and I added a new one with another choices (Yes/No/Maybe).
When I'am using this new custom content type in my workflow task, for some reason there is no choices button. I just see two buttons there Save and Cancel, but I should see three more buttons - Yes, No and Maybe. Just like with default content type there
is two another buttons Aprroved and Rejected.
Please Help!
Thanks

Same problem here--they used to be buttons, and now it's a dropdown. But in my case, I'm still using the same Task Outcome column and options that were there by default. However, in addition for me, the "Show More" link doesn't show up in the forms.
I noticed this happen to me after I changed the column ordering in the content type and added a "Comments" column. Now that I've put it back to the way it was, the dropdown is still there.
"% Complete" and "Task Status" fields are both optional in my content type so that's not the cause in my case. Any updates? This challenge has proven to be quite frustrating.

Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

Hi All,
I have identified a bug in the copy cluster roles wizard in 2012 R2, which is preventing me from migrating my clusters from 2008 R2 & 2012 to 2012 R2.
The bug surfaces when you attempt to copy a VM role from a 2008 R2 or 2012 cluster that has a CSV reparse point name that contains spaces as follows:
The role appears to copy across fine, but once you've migrated the CSV and brought it online followed by starting the VM, the VM configuration resource promptly fails along with the VM.
The issue can be spotted inside the copy cluster roles wizard, where it presents itself by removing all text after the first space in the name to read "C:\ClusterStorage\CSV" rather than "C:\ClusterStorage\CSV
Test Disk 3" as follows:
The bug only appears for VMs on CSVs with a reparse point name containing spaces - all other scenarios succeed.
After searching through the registry on the new cluster, you can clearly see that the VM role hasn't been correctly copied.
It shows a value called SharedVolumeMappings with the data C:\ClusterStorage\CSV|<guid>|<integer>
Whereas it should show the data C:\ClusterStorage\CSV Test Disk 3|<guid>|<integer>
If you modify the data in the SharedVolumeMappings value in both
0.Cluster\Resources\<VM guid> and Cluster\Resources\<VM guid> keys, the VM will start and work correctly.
The problem for me is that I have many VMs on many different CSVs all with spaces in the names of the reparse point! Its not feasible for me to go through the registry for every copied VM on every node of the new cluster, as this would take a very long time
and would be prone to errors that could cause further problems.
Can anyone provide any help on this? A hotfix for the issue would be great, if anyone from Microsoft is reading :-)
My deadline to get the VMs migrated to the new cluster is the 21st February, so I would really like to have a solution to the problem before then if at all possible.
Many thanks in advance,
Tom

Hi Subhasish,
Thanks for the reply, glad that its something that is reproducible!
Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
VMs?
Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
Thanks again,
Tom

Problems with spaces in file or directory names and Word.exe

Hi
I'm trying to open a file with Word from my java aplication, and I have a problem with some file/directory names.
I have this
String cmd = "c:\\Program Files\\Microsoft Office\\Office10\\WINWORD.EXE" + " " + path;
try {
Runtime.getRuntime().exec(cmd);
} catch (Exception errorea){ }
Here is what happens:
if path is something like this: "c:\people\info.doc" , there's no problem, Word opens the document, but if path contains blank spaces somewhere, it doesn't work. For example:
path = "c:\Documents and Settings\info.doc"
path = "c:\Hi everybody\info.doc"
path = "c:\tests\test results.doc"
with the above examples it doesn't work :( Word tries to open "c:\Documents", "c:\Hi" or "c:\tests\test".
Can anyone help? thanx a lot ! : )

Hint: use the variant Runtime.exec(String[] args).
Create a command array, with each token in a separate argument. The entire filename with spaces goes into one argument.

[SOLVED] problem with spaces and ls command in bash script

I am going mad with a bash script I am trying to finish. The ls command is driving me mad with spaces in path names. This is the portion of my script that is giving me trouble:
HOMEDIR="/home/panos/Web Site"
for file in $(find "$HOMEDIR" -type f)
do
if [ "$(dateDiff -d $(ls -lh "$file" | awk '{ print $6 }') "$(date +%F)")" -gt 30 ];
then echo -e "File $file is $(dateDiff -d $(ls -lh "$file" | awk '{ print $6 }') "$(date +%F)") old\r" >> /home/panos/scripts/temp;
fi
done
The dateDiff() function is defined earlier and the script works fine when I change the HOMEDIR variable to a path where there are no spaces in directory and file names. I have isolated the problem to the ls command, so a simpler code sample that also doesn't work correctly with path names with spaces is this:
#!/bin/bash
HOMEDIR="/home/panos/test dir"
for file in $(find "$HOMEDIR" -type f)
do
ls -lh "$file"
done
TIA
Last edited by panosk (2009-11-08 21:55:31)

oops, brain fart. *flushes with embarrassment*
-- Edit --
BTW, for this kind of thing, I usually do something like:
find "$HOMEDIR" -type f | while read file ; do something with "$file" ; done
Or put those in an array:
IFS=$'\n' ; files=($(find "$HOMEDIR" -type f)) ; unset IFS
for file in "${files[@]}" ; do something with "$file" ; done
The later method is useful when elements of "${files[@]}" will be used multiple times across the script.
Last edited by lolilolicon (2009-11-09 08:13:07)

Unable to access files with spaces in the path

Hi all, I am accessing files which reside on the server using a java applet.
The typical path of a file could be:
http://192.168.0.2/agat/data/AF190701 0003.agt
(not the space in the filename).
When I try to open this file using a URL object:
URL file = new URL(filename);
BufferedReader in = new BufferedReader(new InputStreamReader(file.openStream()));
I get exception 400 ( I think) whihc I assume is file cant be found.
However when I rename the file (to get rid of that space) and also change the filename variable to suit. The file is opened as expected.
What should I do to make the applet able to open paths with spaces? Or is this just not possible.
I did try including quotes with the special characte precessor:
filename = "/"http://192.168.0.2/agat/data/AF190701 0003.agt/""
But this didnt work either, please could someone tell what I need.
Thanks.

Thanks guys, although before I got your replies I did the following - it seems to work, but shall try your suggestions.
while (file.lastIndexOf(" ") >0)
String temp;
int num = file.lastIndexOf(" ");
temp = file.substring(0, num) + "%20" + file.substring(num+1, file.length());
file = temp;
}

How to access a url in file receiver CC with space in the folder name?

Hi
PI 7.11 sp4:
In a file receiver channel I would like to send the message to this folder:
de-prod.dk\bu\something\something\PTI eventstanden\archive\"
But I get this error message:
"Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
When I log on the server on which Pi is running I can access the folder using the mentioned url including the ""s.
All suggestions would be highly appreciated!
MIkael

> But I get this error message:
>
> "Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
>
> My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
It comes from the "
Anything else but \ is treated as local folder under working directory of PI
> One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
It works for me just to copy the folder from Windows explorer into channel config. With space and without ".

How to delete the file with space in name

Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help me

Use the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls.

Single task flow with multiple tabs not working properly in UIShell

Hi,
I am using the UIShell Dynamic tabs concept. Here am creating the task flow with a fragment which am binding to the backing bean. if am trying to open the same task flow in two tabs.the getter of backing bean are calling for both tabs when am opening the second tab.
Please provide me any solution or why backing bean getter is firing for the first tab even i opened the second tab.
Reg,
Brahma B.

There are a few problems that I have noticed so far.
Line #1 <!doctype html5> is not recognised, hence the page will revert back to HTML 4.01 Transitoinal. It should read <!doctype html>
Line #51 (links to) style rules should be placed in the <head> element, not in the <body> element
Lines #124, #159 and #188 all link to the same JS file. Delete two of them.
Lines #126, #161 and #207 contain a constructor for the same widget. The former two should be deleted.
Lines #190 and #208 contain a constructor for the same widget. The former should be deleted
Although JS can be placed anywhere in a document, I tend to place all JS at the bottom, just above the ending body tag (</body>) unless the JS is required for rendering purposes in which case it should be placed where it is required. This way, you can keep check of what you have linked to and which constructors you have created thus eliminating the problems mentioned above.
Also you might like to have a look at a collapsible panel group http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/CollapsiblePanelGroupSamp le.html. This will simplify the code somewhat.
Gramps

Error while uploading the general maintenance task list with LSMW

Hi friends,
I am uploading the general maintenance task list with the help of Standard Batch/Direct input method in LSMW. I am using the internal number range for task list.
First task list is getting created properly, but while creating second task list, system is giving the error as "external number range is not assigned for task list and task list with this group ID is already created in the system."
This is because, on initial screen, system automatically takes the group ID of the task list that is created earlier.
My question is
1. How to get rid of the group number that is automatically gets populated in group field of initial screen, while creating the next task list?
2. Is it possible to assign a common identifier in all structure (Header, Operation etc) for single task list, so that system can differentiate between two task lists?
In Equipment task list, we can differentiate the task list with equipment id and group counter.
Please note the following point before replying to my question.
1. I don't want to upload the general maintenance task list with external number assignment.
Thanks in advance for early reply.

I have the same problem....
Please can somebody help me?

Error in query " Value '' of characteristic is not a number with spaces "

Hi Gurus,
I am facing an error in a query with the description:
Error
Value '' of characteristic is not a number with spaces
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Description
This error is occuring in Production system only, the report is running fine in Development environment.
The error is also visible when I execute it in RSRT, I am not able to find the cause of error through RSRT.
Can anyone please help me with the possible solutions.
Thanks & Regards,
Shreyas

Hi Juergen,
thanks for the input, I tried to run the report after loading the master data but still there was no improvement.
I am not sure why this kind of problem is rising, some of the similar reports on same infoprovider are running fine.
Please let me know if you know anything about the cause of error.
Thanks & Regards,
Shreyas

Task Outcomes with spaces

Similar Messages

Maybe you are looking for