IPMP groups status not showing

Hi ALL,
I have 2 V880 nodes with SUN cluster3.1U3. In one node is not showing IPMP Group status.
root@dbserver1 # scstat -i
-- IPMP Groups --
Node Name Group Status Adapter Status
root@dbserver1 #
Please help.
Thanks in advace.

scstat -i should show atleast one IPMP group on running the command. In your output, you are not seeing any IPMP group.
Udate with your ifconfig output.

Similar Messages

  • Ledger Group field NOT showing in FB03 after activating Non- Leading ledger

    Dear All Experts,
    I have activated non leading ledger for my company code and posted the document successfully from FB60. Now coming to FB03 I can see the document in Local Currency and Group Currency - USD but the Ledger Group field still shows complete blank. As I guess it MUST show 1F ( Non Leadig Ledger ) which is my non leading ledger.
    Where I missed the configurtation step ? If anybody has gone through the same issue please guide or provide some inputs.
    Regards,
    Revati Joshi.

    Non-leading ledger use t codes FB01L and FB50L
    The reason that the Ledger Group 0L is being used it´s because the Accouting Principle of your Valuation Area.
    What you have to do is you need to create a new Ledger Group and assgn it to your valutaion area.
    Then you assign this accounting principle to the valution area.
    Then assign the accounting principle to no Ledger Group.
    Please see the customizing path:
    Define new Ledger Group:
    Financial Accounting (New)>Financial Accounting Global Settings (New)>Ledgers>Ledger>Define Ledgers for General Ledger Accounting (dont active your new ledger as leading ledger. leave the standard as the leading )
    Assign Accounting Principle to none New Gl Group:
    Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Check Assignment of Accounting Principle to Ledger Group
    Assign your Valuation Area to the accounting principel just assigned to none NewGL Group:
    Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Assign Valuation Areas and Accounting Principles
    Now you have more then one Ledger Group in you client (which is not being used for nothing) and you have a valuation area that is linked to a Accounting Principle that is linked to no Ledger Group.
    Go ahead now and execute the FAGLF101. You will see that the standard will not try to inform leading ledger in the Group of Ledger.
    I found this solutiong debbuging the standard. Took me quite a bit to discover.
    The problem was in SPRO->Financial Accounting(New)->General Ledger Accounting(New)->Periodic Processing->Valuate->Check Assignment of Accounting Principle to Ledger Group. In "Target Ledger Group" field, the ledger "0L" were configured in BRAP and GAAP. So, the system automatically assigned the ledger "0L" when performing FAGLF101.

  • Sync group does not show local instance

    I cannot find my local sql server listed when I add a new sync group. The hub dialog is ok, but the reference database does not show databases registered using the Data Sync Agent. Those local databases are SQL 2008 SQLExpress, 2012 SQLExpress and 2014
    SQL Server.  None show up. I have successfully done this earlier in the year. Prerequisites are installed. What might be wrong?

    Hi,
    Please have a check on the below link and check if it helps.
    http://msdn.microsoft.com/en-us/library/azure/hh667321.aspx#bkmk_cantfinddb
    Regards,
    Mekh.

  • Specified Order Grouping does not show if Distinct Count is Zero

    Post Author: Hieu
    CA Forum: General
    Hello,
    I'm using Crystal Reports XI R2 with SQL data source. I have a cross-tab report with grouping in specified order. It's a report of applicants applying to a college. The grouping is of various majors (degrees). The report summarizes (distinct counts) the number of applicants for the groups of majors. The problem is that if the count for a group of major is zero, then that Named Group does not appear at all in the cross-tab report. I want the Name Group to appear with the count of "0".
    I notice this same phenomenon with specified order grouping anywhere and not just in a cross-tab. I have tried changing "convert database/other null values to default" but nothing working yet.
    Any help will be most appreciated. Thanks.

    Post Author: synapsevampire
    CA Forum: General
    It's not a phenomenon, it's how databases and SQL works.
    You didn't get any rows back for those with a zero distinct count (otherwise the count would be 1 or more, right?), so Crystal doesn't show any data for those groups.
    So to display a zero for those that do not exist would reuire either advanced SQL, or manual summaries.
    One method for manual summaries is to use Running Totals. Select distinct count of the applicants and group by the majors, then in the evaluate use a formula place:
    {table.majors} = "Blah 1"
    Creating a seperate Running Total for every group and replacing "Blah 1" with the various majors.
    -kai

  • 6.1 NPD - Project Name and Status not showing in the Project Header

    I have this issue in 6.1 NPD - The NPD Project Name and Status is not showing in the Project header when opening a project. Any ideas? Thank you.

    Is this happening for NPD Projects that are newly created, prior to clicking Save? Or for already existing NPD projects?

  • Task Status not Showing Cost Budget

    Dear All..
    Cost Budget is baselined... but in Project Status Inquiry Screen its not showing... When i click Task Status on PSI screen.
    I have run Update and REfresh Project Summary....
    What could be the reason.. Please help...
    Many thanx.

    Hi
    check the PA periods and current reporting period.
    Regrads

  • CRXI & CR9 - Group Tree not showing/available

    I have a report where the Group Tree is NOT showing for both CRXI & CR9! Display Group Tree is checked in both versions. This report has 3 groups. This has happened on other reports. I have tried unchecking the Display Group Tree option and saving report, then checking it again and saving it, but still unable to view Group Tree.
    I have other reports with grouping and the Group Tree is available.
    Any suggestions?
    Thanks,
    JSR

    Please test by implementing following steps:
    1.Open this report in the designer and save with some other name.
    2.Create a new connection to the desired database and use 'Set datasource location'  option under Database tab to set the datasource location to this new connection.
    3.Open each group and re-select the database field (on which the group is based).
    4.Check whether ther are any errors (at run time ) while refreshing this report.
    Please provide following information:
    1.Exact version of crystal reports(Help>>About Crystal Reports)
    2.Has anything changed with this report since the last use.
    Thanks

  • Group Names Not Showing in 10.5.1 Mail Addresses

    Previous to Leopard, the group name would show when I would address a message to a group. Now in 10.5.1 the group name does not appear in the address when it is received.

    Hold down the Shift Key while clicking on the Mail icon to launch Mail
    Hmm, nothing happens here. Clicking in the dock or double click on the app itself?
    Do i get feedback only when there is a problem and not it everything is okey? Is that similar to the "database rebuild" when holding down option while launching Entourage?
    Thanks for further infos
    Patrik

  • Group name not showing notifications on Lock Screen

    Here's the story: I have iOS8.0.2 on my iPhone 5. One of the groups I named, "The Guys", for all my buddies do not show up in the lock screen notifications as "The Guys" like they did before. It's now showing separate txts like it did in iOS7 instead of in a group.
    Example, when I first named the group, every txt message from that group showed up labeled as "The Guys" on my lock screen. Then, for some odd reason, they started showing different " Greg (7)" and then "Bob (2)." Am I the only one having this issue?
    For solutions, I tried deleting the entire thread, redoing a thread, and then renaming it "The Guys." ... Nothing. Same crap.
    HELP! It's annoying. I bunched these people together so that I wouldn't have this issue - because it can get confusing with accidentally typing something into the wrong thread not knowing that it's the group chat. Now I'm having this issue.
    Thanks for help!
    J

    Anyone?

  • Novatel MiFi WWAN status not showing up

    Hi,
    I got the Novatel MiFi running in modem mode using the Novatel drivers. So far so good. But when I click the "Show WWAN Status in Menu Bar" checkbox, nothing happens. Nothing appears in the menu bar. Also the Apply button remains disabled - not sure that's as it should be.
    But mainly, the WWAN status never shows in the menu bar.
    Does anyone what know what I need to do to make it work? Are there some preferences I could delete? Other ideas?
    thanks!

    By modem mode, do you mean wired using the USB port? If true, I would not expect it to show up as a wireless WAN connection. It would be a USB attached modem.

  • Active Directory Sites + Boundary Groups + Database not showing correctly?

    I am having a hard time trying to track down my issue but after digging for a bit, I think I have figured it out but I am unsure how to fix it.
    Quick backstory, we had a domain controller go bad in this ADsite, the domain controller was also a DP at the time aswell and to fix our issues we dcpromo /forceremove it and cleaned up AD after. Created a new domain controller in
    the ADsite, replicated everything across, everything is going as it should. SCCM on the other hand thinks I did something very wrong.
    I'm not sure even how to explain but here goes. SCCM Console shows that the newly created distribution point that is running in the site where I ripped out the old domain controller and it is running well, the boundary is there, the DP is
    tied to the boundary is it looks great. (
    https://onedrive.live.com/redir?resid=B5BA8EC0E0DB675!4966&authkey=!ACD-aPFR5oE6TtI&v=3&ithint=photo%2cpng )
    On the other hand, SCCM Database is not connecting the DP to the boundary. I am clueless on why this is happening. Because of this, it seems like no end users are getting any software. LocationServices on client machines show the computers are in the
    proper site but SCCM does not seem to think the new DP is part of the site.  (
    https://onedrive.live.com/redir?resid=B5BA8EC0E0DB675!4967&authkey=!AEhKiU6eRr6kph0&v=3&ithint=photo%2cpng )
    The other 9 DPs have no issues, they are part of their respected sites, clients are getting all the software from the proper DPs and no issues.
    I would gladly share some log files if they are of any value to anyone. I have looked through ads*.log and have not found anything that would tell me it has issues querying the ADsite.
    Any help would be greatly appreciated!

    Removal of the DC should be unrelated as they is no direct communication. Deleting the boundary/group and re-add them.
    Torsten Meringer | http://www.mssccmfaq.de

  • AirPort status not showing up in menu bar...

    I just started up my computer, and looked at the menu bar for the status of my AirPort connection, and found that it's not shown...
    Nothing in the troubleshooting manual tells me how to turn it on-- it only tells me that it should always be on.

    Try the following ...
    o Launch System Preferences
    o Show > AirPort
    o On the AirPort tab, enable "Show AirPort status in menu bar"

  • Forms component status not showing 'Up'

    10gR2 BI, forms and reports, on Solaris 10. After starting up AS via Application Server Control, the Forms status shows 'Down', yet I can log into our forms app. The status seems to only change to 'Up' after the first login/access. Is this normal behavior? Be nice if all the components that are truly up and available show 'Up'.

    This is normal behaviour, since the application only loads after the first login (not on startup).

  • IW32 After business closer  operation status not showing CLSD

    Dear Friends,
    I have a query here. For PM orders system status gets updated as per business transaction. Operation status also gets changed as per header status. But  it is okay till technical completion and operation staus gets set as TECO. But after  business closer  of the order still operation showes TECO  status in place of CLSD .
    Any clues on this please?  Is this the standard feature or  I need to search for OSS notes to be applied?
    Regards,
    Siddhartho Raha

    Hi,
    That note is no longer released so you cannot see it.
    Note 675240 contains an alternative repair report, at end of page 13 you can see similar update following the comment:
    *    begin of TECO / CLSD handling
    the following section does the update:
    IF update = 'X'.                                   
    *  create an entry in jest that the operations are TECO     
       CLEAR wa_jest.                                   
       wa_jest-objnr = <wa_jest_ov>-objnr.              
      wa_jest-stat  = 'I0045'.
    -Paul

  • What is reason  for authrorization group field not showing in FD01 tocde

    Hi,
      The authrization group is showing  under Control data  when i am creating the customer manually by using the tcode FD01.but when i am creating the customer through BDC program  by using same tcode its giving the error message
    error message is aurization group( Field KNA1-BEGRU. does not exist in the screen SAPMF02D 0120  ).
    can any body  help on the above issue if knows.

    perhaps check field-sttuas of your account group
    tcodes: ob23 and obd3
    Message was edited by:
            Andreas Mann

Maybe you are looking for