Tax calculation (excise duty and purchase tax) issue

Hi friends,
we want to automate MIRO.
we are using BAPI ( BAPI_INCOMINGINVOICE_CREATE ).
while posting that does not propose excise duty ( Modvat ) amount and
sales tax component is calculated on basic price instead of Basic plus Excise.
we are using BAPI in calculate tax mode.
( BAPI_INCINV_CREATE_HEADER-CALC_TAX_IND = 'X'. )
In MIRO:
Basic price   - 100.00
Excise duty -   16.32
(16.32%)       -
Total1           - 116.32
sales tax      -     4.65
( 4% Total1 )
Total            - 120.97              -         Invoice amout
In BAPI
basic price    - 100
Excis duty    -     0                 - Since not proposing while posting
Sales tax      -     4
(4% on basic) -
                      104
hence difference is Excise - 16.32 + Tax component on Excise 0.65
total difference is 16.97.
please give me the solution for this problem.

Hi Experts,!!
Kindly let me know How to use Multiple vendor in BAPI_INCOMINGINVOICE_CREATE.
We have a requirement that in PO multiple vender will be maintained, we have to create individual wise invoice for multiple venders.
I have tried to create it is posing to one main vendor only.
pls. Give some solution
Regards
Sathish J

Similar Messages

Excise Duty and Withholding Tax in Same Document

Hi Experts,
I want to charge With holding Tax which is calculating successfully but i want to charge excise duty for the same document can any one guide me that how can i calculate both Excise and Wit Holding tax on same Document.
Regards
Ashar Anwer

It is possible to edit the Tax Amounts in the A/P documents. But it is not possible to edit the Tax Amounts in AR documents.
To edit the Tax amounts in A/P Documents, click Form Settings and enable 'Tax Amounts'
Now tax amount will be shown in the matrix.
Click on the Golden Arrow in the Tax Amount, here you can edit Tax amount.

Tax Calculation in MM and SD

HI
I am little bit confused in Tax Calculation in MM and SD . Please see the scenario below
In my current project in MM side we maintain Base price , discounts and other MM related conditions using MEK1 and for Tax related conditions we use FV11
So we use Pricing Procedure and Tax Procedure
But in SD side , Pricing ,discounts and also taxes related conditions are maintained in VK11 , SD uses all custom conditions for Tax
So my questions are as follows
1- In standard SD - do SAP have Pricing Procedure and Tax Procedure or both can be used within one procedure ?
2- So in MM can we use tax conditions ( Custom tax conditions) in MM calculation schema and determine the taxes ?
3- In MM if we use calculation scheme and tax procedure , then how tax base is determined for tax calculation ?
Thanks and regards
Bhushan

Hi,
In mm we use Pricing Procedure and Tax procedure both.
2- So in MM can we use tax conditions ( Custom tax conditions) in MM calculation schema and determine the taxes ?
Normally you use MM Pricing Procedure for Base price, discount, freight, packaging etc. However for import scenario custom tax conditions like Basic Custom Duty, CVD, Cess, Sec cess is added in MM pricing procedure.
The Tax procedure could be used for excise duties , CST, VAT, service tax.
3- In MM if we use calculation scheme and tax procedure , then how tax base is determined for tax calculation ?
If you check your tax procedure say taxinn you have condition type BASB and routine for base value as 362 through which it calculates base value
Where as in Sd you could use it in one.
Thanks and regards

Excise invoice and sale tax applicable in consignment process

Hi,
How excise invoice and sale tax applicable in consignment process in below stages--
in consignment fill up,consignment issue,Return andpickup
Regards
Ishikesh

Hi,
You have to pass JV for 50 picked up items through J1IS. For this you have to create new subtransaction type type and accordingly maintain the G/L in the tax on goods movement settings for acoount determination node.
Regards,
Sagar Wairagade

Tax calculation in backend and in SRM (classic and standalone scenario)

Hello,
I have an issue regarding calculation of tax. 2 scenarios are used in common: classic and standalone. One node of Organizational structure is using classic scenario, another node is using standalone. So I have 2 Accounting Systems defined (one for each node).
Requirement is:
- For classic scenario, setting the tax calculation in backend
- For standalone scenario, setting the tax calculation to no tax calculation
Problem is that I can not customize the system this way. I do not know any mean to set 2 ways for tax calculation. Would you have any idea to do this?
Thanks,
Patrick

Hi
<b>Please go through this -></b>
http://help.sap.com/saphelp_srm50/helpdata/en/f4/8b1d40bb37e569e10000000a155106/frameset.htm
Note 848164 SUS3.0: FAQ: Logic of Tax calculation within SUS
958273 FAQ: Taxes in SRM-SUS
999896 EBP tax codes not correctly mapped to back-end tax codes.
908659 Follow-up note for Note 509594
931198 Missing Tax Code in Limit Shopping Cart
430202 Delivery address in shopping cart in BAPIEKPOC
931198 Missing Tax Code in Limit Shopping Cart
881086 Country-specific tax calculation
703292 TAX. Input/Output tax in SAP Supplier Self-Services with TTE
513250 ERS. Tax calculation with the new 3.0 function
390861 Transferring tax table for ERS from backend system
Note 657146 Enhancement for US tax calulation: Functions
510142 EDI-Customizing: Tax code tax-exempted transactions
317040 MR08: Message M8267
49436 MR44: No message if the tax amount is different
Note 84127 Tax Jurisdiction Code for EDI/ALE and Intercompany
Also Try BBP_DET_TAX_BADI.
Regards
- Atul

Exit or BADI when Tax Calculation in MIRO from Purchase order

Hi Gurus,
I Need a Exit or BADI when Tax Calculation in MIRO from Purchase order.
The problem is the tax is automatically calculated from tax code in PO but I want it to be calculated
from PO condition. Is there any exit available by which I can modify the value of tax when ticking the check box of tax calculation in MIRO.

BADI has method COPY_DRSEG_SELKZ but since there only importing paramters and no exporting or changing parametrs you cannot change the values of rseg here.
Try using proper Implicit enahncement by debugging .
For implicit enhancement check
Re: How do we search enhancement point/section
Edited by: Gautam Totekar on May 29, 2009 5:56 PM

Sales tax register and purchase tax register

Dear All,
Is there any standard report for sales tax register and purchase tax register? give me your valuable inputs appraisals are waiting.
Thanks inadvance.
Nauma.

Please refer T code J1I2 for Sales Tax Register. There is no Standard Purchase Tax Register.
Regards
Bhavesh Mistry
Edited by: Bhavesh Mistry on Jul 15, 2009 7:10 AM

Getting the default zero-rated sales and purchase tax codes

Hi,
Does anyone know how to obtain the default zero-rated sales and purchase tax codes? ie the tax exempt sale and purchase tax codes. The OADM holds the default sales and purchase tax codes but not the default zero-rated sales and purchase tax codes. Is this set by region?
Lita

Hi Lita,
I don't know much about the zero rated tax codes or where it is set up, but what I can suggest is if you know where the system retrieves it (say on an Invoice) that you use SQL Profiler to possibly investigate where the queries are pulled from.
Where in SBO is the zero-rated tax codes used?
Hope it helps,
Adele

Tax calculation in SRM and passing onto R/3 PO

Hi,
We are on SRM_SERVER 550, SP07 and R/3 4.7 backend.
1. We have a requirement wherein we want the tax determination to happen in SRM. Basically there is no logic for determining the tax codes, but the user himself selects it per line item when creating the cart.
2. We want this to be transferred to the backend PO line item. The tax codes in SRM and R/3 are identical.
Can this be achieved by standard configuration?
I checked that there are 4 choices for tax calculation in SRM
No tax calculation
Tax calculation occurs in backend
Customer specific implementation'
Tax calc occurs via external system
tax calc occurs via TTE
I am not sure which one we should be selecting (currently its no tax calc). I am also not sure if the tax code which is selected in SRM will be passed onto R/3 Or should this be mapped in the BBP_CREATE_BE_PO_NEW Badi?
The option thro development is to provide a custom field where users can enter the tax code/choose from a list and then map it to the tax code(TAX_CODE - MWSKZ) field in badi BBP_CREATE_BE_PO_NEW. But we would prefer to stick to the standard options if they are feasible.
Any pointers to this would be very helpful.
Regards,
Srivatsan

Hi,
If you have a classic scenario where the PO is created in the backend only the standard configurations will work for this.
1) Determine System for Tax Calculation--- R/3 Tax calculation occurs in backend.
Tax calculation occurs in the Backend System
Tax calculation occurs via RFC in the backend system in Financial Accounting. If an external system is connected to the backend system (Vertex or Taxware, for example), this is automatically called from the backend system.
2) Enter tax code :
As you mentioned use the same key and also the description here. Make the zero tax as No tax and make it as default also ( which is safer for all users).
With these two config steps you will get an F4 help in the for all the tax codes defined whereas the system will suggest the zero tax as the default.
The other config steps are optional where you can have tax codes for you product category. Please do configurations in these steps only if required.
This SC tax code will be there in the PO created from SRM provided if you have entry for this in FTXP in the R3 system.
As far as we have configured you dont need BADI for this standard Tax calculations.
If the invoice is made in R3 with reference to this PO then this tax code can be changed.
Best regards,
Sridhar.

Material cost with Excise Duty and VAT

Dear All,
Please can you suggest how to capture cost of the material with Excise Duty and VAT during GR.
Also kindly let me know the settings required to maintain for caputring the same. We are using TAXINN for tax calculation purpose.
best regards,
Suresh

Hi
Below given the details for TAXINN
Procurement
Set up the following Access Sequences in the the IMG under Financial Accounting ® Financial Accounting Global Settings ® Tax on Sales/Purchases ® Basic Settings ® Check Calculation Procedure ® Access Sequences:
JTAX
JST1
Set up the Condition Types for the following conditions in the IMG under Financial Accounting ® Financial Accounting Global Settings ® Tax on Sales/Purchases ® Basic Settings ® Check Calculation Procedure ® Define Condition Types:
1.     MM Excise Conditions
JMOP     IN: BED setoff %
JMOQ     IN: BED setoff Qty
JAOP     IN: AED setoff %
JAOQ     IN: AED setoff Qty
JSOP     IN: SED setoff %
JSOQ     IN: SED setoff Qty
JMIP     IN: BED inventory %
JMIQ     IN: BED inventory Qt
JAIP     IN AED inventory %
JAIQ     IN AED inventory Qty
JSIP     IN SED inventory %
JSIQ     IN SED inventory Qty
JMX1     IN: A/P BED setoff
JAX1     IN: A/P AED setoff
JSX1     IN: A/P SED setoff
JMX2     IN: A/P BED inventor
JAX2     IN: A/P AED inventor
JSX2     IN: A/P SED inventor
JECP     IN:A/P e-cess setoff
JECI     IN: Eces inventory
JEX1     IN: A/P ecs setoffT
JEX3     IN: A/P ecs invT
1.     LST/CST/VAT Conditions
JIPS     IN Sales tax setoff
JIPC     IN Central sales tax invoice
JIPL     IN Local sales tax invoice
JIP5     A/P RM Deductible
1.     Service Tax Conditions
JSRT     A/P Service Tax
JEC3     A/P ECS for ST
Define the Tax Procedure according to the settings in the figures below.
You can do this in the IMG under Financial Accounting ® Financial Accounting Global Settings ® Tax on Sales/Purchases ® Basic Settings ® Check Calculation Procedure ® Define Procedures.
Set up the following Account Key in the IMG under Financial Accounting ® Financial Accounting Global Settings ® Tax on Sales/Purchases ® Basic Settings ® Check and Change Settings for Tax Processing.
1.     VS6     Input Tax
Assign Tax Procedure to the country.
You can do this in the IMG under Financial Accounting ® Financial Accounting Global Settings ® Tax on Sales/Purchases ® Basic Settings ® Assign Country to Calculation Procedure.

Excise duty in Purchase Order

Dear Guru's
Please find my query mentioned below.......
QUERY:
We are using Taxinn as a procedure
Scenario: Same vendor same material same plant
I want to create 2 Seperate PO
1) With Zero Excise duty
2) With 16 % Excise Duty
How to Solve this Query?
Waiting for immediate response
Regards
Shailesh
[email protected]

Hi Shailesh,
First of all you create a tax code in FTXP for zero tax code say V0 then save it.Maintain this tax code to your company code in
IMG --> Logistic General --> Tax on goods movement --> India --> Basic settings --> Determination of excise duty --> Condition based excise determination --> Assign tax codes to company code
Then in FV11 maintain your tax condition with 0 value only.
Second question
Same manner you create another tax code say V1 with excise duty 16% and assign it to your company code.
Then in FV11 maintain tax rates with respective condition types used for excise duty and education cess.
This way you can maintain tax codes
Regards
Vivek
-- Reward for the effort

Manual Excise Duty in Purchase Order

Hi,
I am facing problem regarding manual Excise duty as such:
For non inventory tax condition type, system calculate correct remaining duty( Education cess, VAT) on manual excise duty which is maintain in pricing procedure
But for inventory tax condition type, system calculate remaining duty( Education cess, VAT) on Basic excise duty maintain in tax procedure instead of manual excise duty
Please help me to solve this problem
Thank's in advance

Hi ,
Are you using JEXC condition type for manual excise?
If it is right,please put this condition type manually while creating PO, and please dont use excise tax codes.
Best Regards,
Nagapandian.

Table Names for Excise Duty and Education Cess

Hello
In view of the recent Indian Budget 2007, Higher Education Cess of 1% shall be applicable from 1st Match 2007.
The notes as suggested by SAP have been implemented and everything is clear for the new POs.
We are having a lot of OPEN POs. The new condition of Higher Education Cess of 1% is to be incorporated to all these POs, where Excise Duty and Education cess is applicable through FV11 in 'Plant/vendor/Material' combination.
Finding out such qualifying records is a bit cumbersome, so that new condition is incorporated correctly.
Can somebody please guide me how to find out such records.
Or the table names which contain Excise Duty, Education Cess and Higher Education Cess.
This will help me to get the new condition entered at the earliest.
Thanks and regards.
-Nandu More

Hi Nandkishor More,
You can get relevant information using ABAP Query using following information;
(a) Material and Chapter ID combination using table J_1IMTCHID and field name MATNR
(b) Pending POs
Hope this information will be useful.
Bye,
Muralidhara

TAX calculation in GR and PO

Hi,
As we define the tax code , and mention this tax code in PO for calculation of taxes like BED,SED etc.In invoice tab we can see the calculated taxes and their respective amounts.
Now in MIGO while creating GR, do I have to maintain the tax rates once again iin GR excise tab also??
I wnat to know in GR whther system takes the tax related information from
1. tax code in PO or
2. from J1ID if yes from where in J1ID OR
3. We have mention the tax rates in GR excise item tab. As system should show some excise duty in "EXCISE ITEM " of GR screen.

it depends on tax procedure u use
if TAXInn
then it depende on condition record u maintain in FV11 for material plant vendor.
and in j1id u will have to maintain material chapter id combination and cenvat determation
also vendor excise details
excise indiactor for plant
excise ind for plant and vendor
if taxinj
then
tax value will be pickep up from Taxcode which u put in FTXP and put in po
in j1id u will have to put the tax rate for bed in excise tax rate.
hope this will hepl u
reward accordingly

Vat or sales and purchase tax

hi,
can anyone explain
1) how purchase tax (input tax) happens and
2) how sales tax (output tax) happens
thanks
rgds

Hello,
If you're posting an incoming invoice you must use purchase tax. In FTXP you can define purchase tax with using VST account key. Otherwise If you're posting outgoing invoice you must use sales tax. ın FTXP you can define sales tax with using MWS account key.
In FTXP give percantage to account key VST for purchase tax (for sales MWS account key) and click Tax account for assigning tax G/L accounts.
After that for example in FB60, give amount for vendor and G/L item, give tax codes and click calculate tax. In simulation screen you should see the tax calculation.
I hope it's enough for you.
Regards,
Burak

Tax calculation (excise duty and purchase tax) issue

Similar Messages

Maybe you are looking for