Tax code update in inforecord.

Hi,
Inforecord was created automatically and the tax code was updated as in PO, By setting info update indicator in PO,
Now As per tax calculation was changed and new tax code was created. But every time when we enter the tax code in PO, It was not updating in inforecord.
we want to update the new tax code rather than by manual changing, Because this is not for one info record.
Could anybody suggest the best way to handle this.
Thanks in advance.
Vikas.

Hi Friends,
Any alternate way to handle this issue
Vikas

Similar Messages

  • Tax code update

    Hi everyone,
                       Can anyone pls explain how to setup a nightly tax code update for a PO.
    Thanks

    Hi Friends,
    Any alternate way to handle this issue
    Vikas

  • PURCHASE INFO RECORD TAX CODE UPDATION THROUGH PO

    In Purchase info record tax code is alredy exist  for one vendor and material.
    while making new  Purchase order for same vendor and material but tax code is differant then can tax code will not update automatic in purchase info record.
    How to do automatic updation in purchase info record?

    Hi,
    The Tax code will be updated from the PO at the first time Info record created from the PO as per the Info update setting.
    In your case as already with tax code an Info record exist as per standard the new tax code willn't get updated in to the existing info record. You have to change the new tax code in the info recordfrom the transaction ME12.
    Regards
    Eshwar H

  • Tax code update after new pricing in Purchase order (me22n)

    hello,
    I have implemented the badi's ME_CHECK_ALL_ITEMS, ME_DEFINE_CALCTYPE
    to make a new pricing when the country of Sales Tax id (STCEG_L) changes.
    Everything works fine, except the TAX CODE won't be updated on the tab 'invoice'
    Daoes anyone know how I can handle this?
    thanks
    Werner

    Hello Ajit
    Please understand the question before answering.
    The requrement is, to get updation of tax code in PIR, when a PIR is created first time through info update from PO item.
    warm regards
    ramSiva

  • Tax code update in info record?

    Hi, Gurus
    a question, somebody knows if it is posible to update the tax code in info record update indicator?.
    Info record was created automatically and the tax code was updated as in PO, by setting info update indicator in PO but every time when we enter the tax code in PO, It was not updating in info record.
    Thanks in advance
    RZ

    The Tax code in Info record gets created/ stored, only when the PIR is created very first time by the system. This field does not get updated even when the Update PIR has been checked in any subsequent PO.
    The Tax-code field is set at the P.Org level, & is not at the plant level.
    Hence it will create the issue,
    if the plant considered in very 1st order is in different county (US) than the plant (country- Germeny) considered for the subsequent PO for the same material , vendor & P Org. As it will default the wrong tax code. Hence it is advisible NOT to maintain the tax code at PIR level.
    Regards,
    Samip Patil.

  • BDC for Tax code updation

    Hi all,
    Iam trying to update tax code for open POs using T.Code ME22. For this iam writing BDC using call transaction.
    I have PO, POitem,INTROW,EXTROW,Required Tax code in input file.
    Pls guide me how to handle the updation of tax code with the available information.
    Note: All the POs are last fiscal yrs open POs.

    Record the BDC using SHDB with one of the records given in your file.
    Check the code and use it in your BDC program.

  • Tax code update in Accounting document

    Hi All
    I have a situation like this, During MIGO, tax code say V1 is given in Header and also at Line item and also in the PO.
    Now Accounting document generated like this.. say
    Vendor -XYZ   Credit 100   -- Tax code ** (Star Star / Asterix)
    GR/IR               Debit  90          Tax code  V1
    Price diff         Debit 10            Tax code V1.
    Why tax code against Vendor is updated as  * *   Instead of V1 mentioned during MIGO. (In BSEG also it is updated as ** against vendor)
    I checked few other vendors where tax code is updated as V1 for the same above said scenario.
    Thanks
    Aravind

    Alex, i cleary mentioned Only ONE Item.
    One PO
    One Vendor (Credit)
    One Material ( Debit)
    Same Tax code @ Header and also in the Item.
    Debit - GR/IR - 10  Tax code - V1
    Credit - Vendor - 11 tax code - **
    Debit - Price diff - 1 Tax code **

  • Tax Codes Updations

    Hi,
    we have created a tax code& working fine in Development Server. Then transported to Production.
    But the changes not appearing in Production.
    please suggest
    Regards,
    Varma

    Hi Varma,
    Please, check if you acted in compliance with note 52852.
    You have to follow certain procedure if you want tax codes to be transported.
    Regards,
    Eli

  • How the system calculate the tax code in MIRO ?

    Hi
    I made PO in SAP  for material X and Entered the Tax Code I1 but When, i doing the MIRO in SAP, system automatically taking the another Tax code.Also i am trying to change the tax code in MIRO but s/m not allow to change the Tax code.
    I am not also maintained info record also.

    Hi,
    While doing MIRO the tax code will defaulted from PO for each line item , but to adjust the tax at last you should enter the tax code manually at header level in MIRO and post it.............
    In PO it will be defaulted if you maintain the tax code in Purchasing inforecord aor you should enter it manually.....

  • RKWA table has no Tax code

    Hello ALL,
    For tax code error I have added tax code for consignment inforecord and still the error exists then i have checked RKWA table and there for 50 entries where there is no tax code showing in them.Pls help me how can I go ahead?

    check tcode MRM1...
    Enter Output Type : KONS...key combination as " Company Code"...
    enter Comapany code and function as VN...Medium as "1"..Date/Time "3"
    Go to Communication tab and Maintain Output device as LP01
    Now try..

  • User Exit or BADI for Updating Tax code (MWSKZ) using ME21N

    Hi all,
    I am trying to fin out an exit or badi for Updating Tax code (MWSKZ) and Unit of Measure in transaction ME21n.
    The scenario is like this...
    For Purchase Orders Tax code will be defaulted from Purchasing info record or contract or parameter id for that item-vendor-plant.
    If the Tax Code is not defaulted and account assignment is blank then tax code on the PO is updated according to the below mentioned table
    Table
    Supplying Plant/              Receiving Plant                      Tax code
    Vendor/Country
    Any plant/vendor/
    country                           5050(NA)                               20
    2300                              6700                                     E0
    If the tax code on PO cannot be updated by the above table, then buyer needs to put tax code on the purchase order manually.
    Thanks,
    Shiva, Bangalore

    Hi Siva.,.,.,
    These r the exits.,..,which will be called while calling ME21N/ME22N/ME23N
    EXIT_SAPMM06E_006
    EXIT_SAPMM06E_007
    EXIT_SAPMM06E_008
    EXIT_SAPMM06E_009
    EXIT_SAPMM06E_012
    EXIT_SAPMM06E_013
    EXIT_SAPMM06E_014
    EXIT_SAPMM06E_016
    EXIT_SAPMM06E_017
    EXIT_SAPMM06E_018
    U want to default some values while the Initial screen will come right,
    while u Enter ME21N in command Prompt.,.,two exits will get triggerd,
    EXIT_SAPMM06E_014
    EXIT_SAPMM06E_016
    If u want to Default some values u can use these two exits.,.
    Try using EXIT_SAPMM06E_016.,.this will solve ur purpose.
    and if the user changes some values on screen.,,and you want them to get reflected .,.,.that means if user changes and saves data .,.
    While saving.,.,EXIT_SAPMM06E_012 and EXIT_SAPMM06E_013 will get triggerd
    Try using EXIT_SAPMM06E_013.,,.it was somehow the same requirement as mine.,.,IN my case it worked fine.,.,
    Regards
    Debasish
    Message was edited by:
            Debasish Das

  • The Error Message in Tax Code determination Set up At the time of updation

    When I update the taxcode in the Valid Period-Setup Form Taxcode determination Forms of the SAP, an error message occur "THE COMBINATION OF KEY FIELDS CANNOT BE DUPLICATED" in the status bar at the time of Update button pressed.what is the reason for this error message? how can I overcome the above error msg and update the taxcode ?

    What is your B1 version and PL? You may check this: Re: Problem related to the Cenvat Tax Code
    Thanks,
    Gordon

  • Purchase order does not update tax code in info recode ?

    Hi Expert,
    Please help me ...........
    I have 2 problems.
    1. I created PO and tick Infoupdate at ME21N but tax code doesn't update to info record ?
    2. How to tax code can be defaulted into PO line items by I don't want create info recode ?
    Thanks,

    Hi,
    Pls. find below the answer for your query..
    "Because. the condition in p.o is time independent. So, condtion will not update in info record also see info update indicator in p.o material data tab."
    Hope it will clarify your doubts.
    Award. if helpful.
    Regards
    Rifaie.M

  • Update Taxes in PO without Tax code in Purchase Order

    Hi Experts,
    Taxes percentage are frequently change in Indian business and create new input tax codes for updating the same changes in PO.
    Please suggest without create new tax codes how can we maintained tax details in PO?
    Thanks in advance.
    Regards,
    Shatrughan Singh

    Hi,
    Tax code creation required or not-Depends on which access sequence (JST1 or  MWST ) used in your tax procedure.
    If tax condition types have access sequence JST1,then you can maintain to change tax rate with validity period without creating a new tax code.
    Validity Period available for tax condition types which have access sequence JST1 not access sequence MWST
    Regards,
    Biju K

  • Service tax deferred tax code entries not updating DEFTAX-ITEM table

    Dear Friends,
    We are using SAP ECC 6.0. We have configured service tax receivables through deferred tax codes.
    Based on the OSS ntoe 921634 we did all the changes & activated this event also.
    Event     Product                     Application     Function Module
    1025     DEFTAXRU             FI-TAX     CREATE_DEFTAX_ITEM
    1030     DEFTAXRU             FI-TAX     SET_DEFTAX_ITEM
    1040     DEFTAXRU             FI-TAX     CREATE_DEFTAX_ITEM_REVERS
    1050     DEFTAXRU             FI-TAX     CREATE_DEFTAX_ITEM_MR1M
    After this changes also the values are not updating the table DEFTAX-ITEM. So while running programme RFUMSV50 - Deferred Tax Transfer (New) the values are not flowing.
    Please help me to solve this issue
    Thanis
    Christopher.J

    HI,
    Please help us.  We are also in the same status.  How can we solve this issu?
    rajeswari

Maybe you are looking for