Tax deduction in EXPORT process

Hi
Please let me at what stage will we deduct tax ( during SAP business transaction ) in following senarios
1. When Form C is submitted
2. during Export process when ARE 1/bond is generated
3.when ARE 3 document/license is generate/bond
For above senario's I want to clarify that will we deduct tax while creating sales order or will we adjust it after invoice when we create bond/license.
Thanks

Hi,
1.C form is a sort of tax discount applicable when both the parties are registered under VAT (TIN No ) Say instead of 12.5 % tax bill at 2% tax if C form is received before PGI.Create a tax classification with C form and without C form and assign to your customer master and use the same in sales order.
2.Both exports (Except claim of rebate) and deemed exports are exempted from excise duty and sales tax as per govt norms,In sales order the excise values will be calculated but will be statistical (No account posting) the displayed value is only for creation of ARE forms (Export removal).
Regards,
Siraj

Similar Messages

Remit tax deducted under 1099 process

Hi
We are implementing 1099 report in SAP ECC 6.0. as part of the 1099 we are withholding 25% for certain vendors.
Can any one guide me on how to Pass accounting entries for the remittance of the tax to IRS.
For India there is specific T-code J1INCHLN for remitting the amount, Is there is anything like that for USA.
Thanks in Advance
Thanks
Karthik

The answer is resolved through Note : 1301243
Thanks

Income tax deduction

Hi,
We are facing the following issue:
When employee is locked say in the month of November and then in the
month of december when the locked is release and the payroll is
processed normally, the net tax payable by the employee is deducted
fully and does not get pro-rated.
For eg: if the net tax payable by the employee is 16043, then when the
payroll is processed in the month of December, the income tax should be
16043/4=4010.75, but it is deducting the full 16043 as income tax.
cheers,
Ayyaps

Hi,
In your thread you have mentioned that the payroll was blocked for the month of Nov and was run on Dec which triggered Retro run.
Kindly note that if the payroll was blocked for Feb and was run in Mar then the tax effect will be the same as you mentioned.
Also please mention the values of below wage types for the month of November and December
/450 Tax payable and surcharge
/456 Tax deducted so far
/458 Net tax payable
/460 Income Tax
Thanks and Regards
Kiran

TAX Deducted @ Sources

Dear All
As SAP provides the standard withholding tax solution on incomming payments. but my problem is that at the time of incomming payment i can't post the withholding tax amount becuase my customer don't provide me the payment detail (Remittance advice). please suggest me what can be the process and how i can post the withholding tax deducted by customers.
my country is pakistan and currently, no country specific solution is available for withholding tax.
Thanx

Thanx Madhav
i am already using EWT functionality.
Withholding tax is being deducted at the time of payment, its my company legal requriment. so tax should be deducted on imcomming payments in customer cases and it is working fine if i post the withheld amount at the time of incomming payments through f-28 e.g.
but the problem is that my customer are not paying to my company invoice to invoice and never provides the detail of payment. so i can't post the tax at the time of payment receiving. After some period customer sends to my company tax challans then my company wants to post the withholding tax amount.
Edited by: Farhan Rashad on Apr 27, 2009 4:20 PM

Pre-Tax Deduction Wage Type

What is the best practice to create a new Pre-Tax Deduction Wage Type that will be used for a new Benefit related program?
I will need this new pre-tax deduction wage type to be processed in Third Party.
Thanks,

You can copy one of the model wagetypes BA , BE , BR series has most of benefits wagetype.
BA_ _ EE Contribution
BE_ _ EE Contribution
BR_ _ --> Employer Contribution
M730 401K contribution
1. goto Pu30 use one of the model wagetype and copy to a custom wagetype
2. change it hr payee and vendor number in the SPRO--> Payroll --> Payroll US --> third Party remittance node

Income Tax deducted for withdrawn employee

Hi Experts
In my Client One employee is withdrawn on 31.04.2011n he got final settelement in that month,But in the june payroll for that employee income tax deducted,we have cheked all his prevoius payroll cluster but not able to get the solution.Can anyone tell why this happend
regards
Aakash

Aakash,
Once employee moves to employement status zero, payroll will only be executed if there is some master data change. Without that it is not possible. So just check if system ws triggering some retro for this test case. Also you can check IT0003 'Earliest MD change' for the reason. Alongwith it even if the user has deleted the record, you can still do the simulation run and check the results for the employee. from result you can easily track if there was any chnage.
Edited by: Praveen Tiwari on Jun 24, 2011 7:30 PM

Info type and subtype to stop income tax deduction for a month

can i know how to stop income tax deduction for a month for a specific employee. I understand that this s possible

Hi
You can use additional wage type (infotype 0015)
and subtype voluntary tax std is MVT1 as per SAP
if you maintain 0.01 value here and indicating the month
SAP calculated income tax is supressed and this is how u can stip income tax deduction for a month
with regards
partha
keep sharing and learning

Excise invoice and sale tax applicable in consignment process

Hi,
How excise invoice and sale tax applicable in consignment process in below stages--
in consignment fill up,consignment issue,Return andpickup
Regards
Ishikesh

Hi,
You have to pass JV for 50 picked up items through J1IS. For this you have to create new subtransaction type type and accordingly maintain the G/L in the tax on goods movement settings for acoount determination node.
Regards,
Sagar Wairagade

Any solutions for "Export process terminated unexpectedly [11]" problem?

Hey guys,
I'm trying to simply use Quicktime Pro (Version 7.6.6 Build 1632) to enable the "Fast Internet Start" feature of a 640 x 480 video H.264 video. It uses 16-bit Little Endian for audio, if that's of any help.
Anyway, like lots of other users with this same exact problem, I make the changes in the "Export" dialogue (in this case, enabling "Fast Internet Start" and lowering the audio quality a bit), and the little status indicator goes away and "Export Process Terminated Unexpectedly {11}" appears in its place. Has a definitive answer been found for this problem?

Similar issue here when exporting AVI files captured from Canon G9 to iPod.
QuickTime Pro quits with: Failed: process terminated unexpectedly (11).
Oddly, if I start from a power off and run QTime the error does not occur.
Of course powering off for every export is a real PAIN IN THE Axx but it is a work around on this end.
I have yet to try 3rd party software but this is error occurs with Quick Time Pro Ver 7.5 build 149.5.
Sad

Vendor - Tax deduction at lower rate - MIRO & FB60

Hi all,
Currently we are having one issue of u201CTax deduction at lower rateu201D for a Vendor who is having such certificate with him.
For amount purpose we have set the SPRO setting but the user is asking for the date control also since the Vendor is having the relevant certificate till 31.03.2012 and after that, lower rate Tax deduction will not be allowed.
Simple option is to change the Vendor Master with the original tax type+ Tax code (Normal Rate) combination to calculate tax at the normal rate. But if could not cross the amount limit before 31.03.2012 then that will be difficult to keep an eye on date i.e. 31.03.2012 and then change the master data of u201CNu2026u201D No. of Vendors .
We want to put a condition in a system as; system should check the system date with the tax type date to get a date control. We have restricted the date of u201Cnewly created tax typeu201D till 31.03.2012.
In case of MIRO testing, we have use a user exit which is correctly comparing the system date with the tax type date in runtime. If the tax type date is older than system date then system is throwing an error to change the master date (FK02 / XK02) of subject vendor.
In case of FB60 we are facing a problem since not able to cross confirm the tax type date with the system date. We are trying BTE u2013 1140 for FB60 but in runtime we are not able to get the tax related details / tables.
Is there any workaround or way in BTE u2013 1140 for FB60?
Regards,
Shridhar
Edited by: Shridhar Sawant on Nov 2, 2011 2:23 PM

Hi Ramesh,
In the SAP Std. setting of Formula we are maintaining one more line for same TAX TYPE + TAX CODE + COUNTRY combination but for the ending date of lower rate tax deduction.
Since there is no "To date" option in Formula setting, we are maintaining one more line For e.g. in the 1st line we have a date as 01.04.2011 (i.e. Valid from) and in the other line we have mentioned date as 01.01.2012 (i.e. To date) since Vendor is having the lower rate tax deduction certificate uptill 31.12.2011.
In the first line of formula (Valid from 01.04.2011) we have maintain :
To Base amt              W/tax    Reduction base amt.
175,000.00                 3.00               -
9,999,999,999.00     10.00     175,000.00
In the second line (Valid from 01.01.2012) of formula we have maintain :
To Base amt             W/tax    Reduction base amt.
9,999,999,999.00    10.00               -
Cross confirming the various scenarios since date accumulation of tax setting is on in Tax Type that we are considering.
Will confirm to you the change suggest by you.
If these changes doesn't work then we have to go to the option of User exit or BTE for MIRO and FB60 testing.
Have any idea about the above mention settings ?
Regards,
Shridhar

Extended withholding tax deduction from customer credit

hi all
configured the extended withholding tax for deducting tds from customer credit line items.
deduction is required only after the amount accumulation 2500/- (this is also configured)
1.is the recipient type and country is not required for the customer tds..? (it is not visible in the customer master, but is in vendor master)
2.in the amount accumulation for 2500/- consider the following scenario.
>>first bill amount 2450/- (no tax deduction)
>>second bill for Rs.100/- from which i need to deduct tax for 2550/-, since Rs.100 is not enough to deduct 10% tax from tax base 2550.00 it is throwing error.
pls help
with best regards,
sallu c.mathew

Hi Ajeesh,
As already mentionned in standardf help from sap, you use J1INCUST which is a report to record the with. tax certificates sent to you by your clients. In doing so, the system clears the wi. tax to a G/L account that records how much tax your customers have withheld on your behalf, known as the customer tax creditable account. You can offset this tax against your income tax payable at year-end.
And you run the report immediately you receive a certificate from a customer.
Then system creates an accounting document to transfer the withholding tax from the G/L account for the withholding tax deducted by your customers to the customer tax creditable account.
Best regards,
Tarek

Vendor tax deductions

Hi all,
Same vendor with different tax deductions. How to capture?

Hi raju,
Vendors are subject to withholding tax and input tax that means vat are anything
sales tax related to customer that is output tax.
In withholding tax as per 194c rent and commision salraies and traveling borkerage and interest this are related to wth
for this need to create withholding tax code and tax rates these tax code are assinged to vendor master based on tax code its automatically deducted,
related vat input need to create tax codes in ftxp at the time of invoice or payment if u select tax code its automatically deduct and its goto respective account based on assingment.

Query Regarding With holding tax deducted

Hi,
Hi,
I am facing one problem with With Holding Tax deduction.
Let us explaining with example:
1) Ist I passed one entry through T.Code: f-48 then deducted some TDS (Rs. 5000/- down payment).
2) IInd I passed one invoice T.Code: f-43 then deducted TDS (Invoice amount Rs. 10000/- but tds base amount entered Rs. 5000/-).
Here above I passed two entries and deducted total amount of TDS.
3) While at the time of balance amount payment T.Code: F-53 again system will deduct TDS.
I am facing problem here. Why system is again deduct TDS at the time of balance payment. Already balance amount of TDS duducted at time of Invoice.
Please suggest.
Regards
Srinivas Gundala

Hi,
If i am not wrong, the system is reverseing the deduction it has made at the time of adv payment.
Its not deducting again.
Consolidate all the three documents -
- Adv pay
- Inv
- Payment
and you would appreciate the beauty of the concept.
Cheers
Raghu

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

Automating the import / export process in 9.0.2

In Portal 3.0.9.x the export and import were entirely command-line driven tools, so it was possible to automate the process to a certain degree.
In 9.0.2 the import/export process is a combination of scripts and manual actions through the Portal UI to import and export the transport sets.
Is there any way in 9.0.2 to automate this process ?

You make me feel better. I am having THE problem. Logs say it was all a success but NOTHING is imported. I tried with portal 9.0.2.2.22 on Win2000 and now I'll try it on 9.0.2.2.14A on Sun. What did you use?

Tax deduction in EXPORT process

Similar Messages

Maybe you are looking for