Tax does not equal 0 when tax rate is Zero

Hi,
We have a problem when posting an invoice through MIRO. The end user gets the message 'Tax does not equal 0 when tax rate is Zero'. I checked the tax code and it looks fine.
Can anyone throw some light on the error?
We are using vertex for tax calculations.
Regards,

Hi Raj,
Please chek OSS NOTE 681538 .
Check for the applicable releases and support packages from the note.
Check from your system on what support package you are into. Goto System -> Status -> click on the magnifying glass against Component version and see what is the support pack for SAP_APPL.
You can ask your Basis colleagues also to check if it can be applied into the system. I guess they would check it through t-code SNOTE.
Regards
Surya

Similar Messages

MIRO Tax Error NAFF707 Tax does not equal 0 when tax % rate is Zero

Hello Sap Guru's-
New issue with MIRO today for all our invoices with tax. We have been live with ECC 6.0 and something has changed preventing my users from posting invoices.
When the user adds tax and an item to undisclosed amount for freight, etc, typically the user goes and post. SAP is not allowing this to happen as we receive the following error:
Error Message NA FF707
Tax entered incorrect (code I1, amount 6.86) correct 0.00
The system checks the tax amounts for each code on document level. However, the amounts entered deviate more from the amount calculated (using the percentage rates defined in the tax code) than is alloweed considering rounding errors.
This message is an error message, and the error is telling me to correct the tax amounts or the base amounts, depending on how your tax code is defined.
We are on Vertex.
When I look at the PO, the lines for tax are zero.
Is this a Vertex problem?
I appreciate your help!

figured it out

Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

Hi Guys,
I am facing very critical issue on down Payment request, to process with saperate Tax Value.
We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
Below is the error message:
Down pmnts with taxes are not permitted when processing with jur.code
Message no. FS206

HI Preeti,
Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
Did any one seen this case in your experiece, if yes, what is the work-around solution?.
Need your help guys!,...
Regards,
Damodar Naidu

Showing Booking amount when it does not equal Opportuity Revenue Total

I there a way to create a report to easily show where the booking amount of an opportunity does not equal the sum of the products in the product revenue section? I tried Sum(Product revenue), can't quite remeber the field name, but that did not work
Also, we would like to see any opportunity that has no predict revenue associated with it, either in the same report or a different report.
Thanks

David,
The Opportunity-Product subject areas contain both Opportunity Revenue fields and Opportunit-Product Revenue fields. The Opportunity-Product Revenue field located in Columns/Opportunity-Product/Revenue/Revenue will aggregate the total amount of all products for the opportunity. There is no need to SUM this field.
Build a report and filter it based on a field that calculates the difference between the two revenue columns and you should get your desired list of opportunities.
Now that you know where the right fields are, you other report should be a simple filter on the appropriate revenue field = 0
Mike

Enter an input tax code, not an output tax code in Txn CNMM

Hi All,
We are trying to use PROMAN transaction CNMM from Project systems for converting PR to PO. But when I try to do that I get the following error
"Enter an input tax code, not an output tax code"
So it seems that the system is picking the incorrect sales tax code in PO because of which the PR is not converted to PO then. But when I check in transaction CNMM there is no place to input a tax code anywhere. So the system is probably picking it from somewhere, but I am not able to figure out where is it picking it from.
Does someone have an idea about where the system is picking the tax code?
Regards,
V S

Hi,
Can you do one thing in your testing server....
Create purchase requisition manually for that material and with respect to that requisition try to create PO without putting any tax code, and see whether you are able to create PO, keep the same document types at PR and PO level, (it should be the same when you create PO thru CNMM)
-Saleel

KE5Z drilldown report does not equal grr3 report values

Hello,
We have a grr3 report where the COGS line is based on functional area and account ranges. The total displayed on the GRR3 report for the COGS cell matches the values I would expect based on the specified account and functional area restrictions assigned to that cell. When I drill into the KE5Z report (Profit Center: Actual Line Items), which is identified as a receiver report, the summed value of the "In Company Code Currency" field does not equal what is displayed in GRR3. The GRR3 report is returning results in the same currency as the company code currency that the report is being executed for so that is not the problem. During my investigation it looks like the functional area restrictions are not being accounted for when I drill into KE5Z. Any recommendations on why the restrictions identified for the cell in the GRR3 report would not be carried through to the KE5Z results? I have been playing with this for hours and have run out of ideas. I can't determine why the COGS cell value is different than the actual line items sum. Any help would be greatly appreciated.
Thanks,
Jordan

Hi Jordan,
in my experience the report-report interface can only pass through selections independently.
To give an example: I had a report painter report with line 1 that had a selection on two characteristics (say cost element A and cost center B) then a second line with selection cost element C and cost center D selected and finally a line with the sum of the two lines above.
Now when I jump to a connected line item report by double-clicking on the line with the sum, the parameters passed on are:
cost centers: B, D
cost element: A, C
Therefore, the sum of my line items is not equal to the sum that I departed from, as I get line items with cost element A and cost center D, for example, a combination that was excluded from my original report.
I hope I made the point clear.
Another possibility is of course, that the receiving report has additional selection active (in the form used in the dril down report) that were not present in the original report
Regards
Nikolas
Edited by: Nikolas John on Mar 24, 2011 9:21 AM

Multiple selection in Query Panel. Operator Does not equal generates error.

Hi,
I'm using Jdeveloper 11.1.1.4 and creating Oracle Fusion Web Application with ADF Business Components.
I want to use multiple selection on LOV in ADF Query Panel with Table, but I get the following error
when I use operator "Does not equal":
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
A simple example:
Schema: HR
Generate default Business Components for tables Departments and Employees.
Model:
Create List of Values for EmployeesView(DepartmentId)
List Data Source: DepartmentsView1
List Attribute: DepartmentId
Display Attributes: DepartmentName (UI Hints)
Create View Criteria EmployeesByDepartmentVC for EmployeesView
Criteria Item:
Attribute: DepartmentId
Operator: Equals
Operand: Literal
Select "Support Multiple Value Selection" (UI Hints)
ViewController:
Create blank JSF Page: showEmployees.jspx
Drag EmployeesByDepartmentVC from Data Controls to showEmployees.jspx
Create Query=>ADF Query Panel with Table
Run application.
Press Advanced button.
Select operator "Does not equal" and department names "Administration;Marketing"
Press Search
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
Note: it works fine with operator "Equals"
Best,
Kees.

Hi,
I was reading:
http://www.oracle.com/technetwork/developer-tools/jdev/jdev-11gr2-nf-404365.html#bugs_fixed_in_11.1.2.2.0
Bugs Fixed in 11.1.2.2.0
Bug.No. 13508184
unsupported model type error thrown for multi select view criteria
I have tested the use case described in this thread with JDeveloper 11.1.2.2.0 but I still get the same error.
when I use operator "Does not equal":
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
Is there anybody who can tell me more about this bug fix?
Thanks,
Kees.

Argument error; the number of columns does not equal the number of parameters.

I am using the Database Toolkit (Enterprise Connectivity) to check for a network connection and then send information from a local database to a SQL database on the network if needed. In development of the code I continue to receive Error 1 and the Possible Reason(s) is "Argument error; the number of columns does not equal the number of parameters." I am using the DBToolsSelectData.VI to retrieve data from the local MDB file and the DBToolsInsertData.VI to write it to the SQL file. The collection of the data from the MDB file is successful and the connection and validation of the table and columns in the SQL file is also successful. The error occurs when the Insert VI tries to build the query. The number of columns being written (attempted) does match the number of columns in the data, they are both 16 string arrays.

Ok, it's taken a bit, and I have a solution! It took a while to figure out what the DCT is doing, but it seems to be working now.
The reason for the original error is that you were passing into the insert subVI an array of variants - which the input to the VI coerced into a single variant. You were getting the error because as far as the insert VI was concerned you were only passing it a single data value. The way to get around that was to create a cluster with one element for each column value, convert the cluster to a variant and pass the result to the insert VI - see attachment.
In terms of the other modifications, I made a copy of the endurance.mdb file, emptied it and used it as the destination for the copy.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
NetworkCheck.vi ‏49 KB

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite. It is not listed on their system requirement website:
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard*
Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
Only case insensitive file-system volumes are supported.
http://www.graphisoft.com/support/system_requirements/archicad17.html

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

Tax does not equal 0 when tax rate is Zero

Similar Messages

Maybe you are looking for