Tax error message

Hi all,
We encounter error message for a tax line item, everytime we post a transaction with tax, error message pops when we are about to post it and what we do is just double click on the tax line item and the transaction is already ready for posting.
I would like to remove the said error, i dont know what part of configuration was incorrect. Please help thank you.
error encountered:
Error messages still exist -> see error log
Message no. F5A047

We are currently using EC6 version of SAP. My apology but i dont know how to view notes of SAP if you could help me how to navigate the notes it would be a big help.
We need to remove error message on posting taxes.
Thanks again, waiting for reply.

Similar Messages

Warning/Error Message for Tax Code Mismatch between PO and Invoice

Hi Experts
Is there any SAP standard warning/ error message thrown when the User changes the tax code in the invoice which does not match the default tax code of the PO? The client would like to identify a 'tax code variance'.
If no, is there anyway we can configure this? I have checked in OMRM and OBA5 and could not find any relevant message types for the above requirement.
Any inputs would be helpful.
Regards

Hi,
Can you maintain the validation for your requirement, when user change the tax code system give warning or error message automatically.
Edited by: Lavanya.ch on Dec 15, 2011 8:15 AM

Non PO invoices sent for Approval - getting error message - Tax Jurisdictio

Hi Experts,
Our clients have just upgraded from SAP 4.6C to ECC 6.0 and when the Non -PO invoices are sent for approval the user is getting the below error message.
'Specify a tax jurisdiction key' - Message no. F5566
Could any one suggest what the reson could be.
Answers would be suitably rewarded.
Thanks in advance,
Manish Singhi
E- [email protected]

Hi,
Can anyone suggest on this.
Thanks,
Manish

When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code".

Hi Experts,
When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code". As checked, we have configured OBCD and OBCA for the vendor and we are passing the Tax Jurisdiction code in E1EDP04 SAL segment. Can anybody give us some idea to resolve this issue.
Regards,
Sameek

Hi Sameek,
Please refer the below link. Hope it helps.
http://scn.sap.com/thread/1435286
Regards,
Chandan.

Enter Valid code,Tax Definition [Message 173-36] error while creating new posting period

Hi Experts,
We are not able to create posting period of 2014-15 as we are getting this error.
Enter Valid code,Tax Definition [Message 173-36] error .Please find the enclosed error screen shot for your reference.
Regards
KMJ

Hello KM Jayaprakash
I have the same problem, but i dont see (know) the screen which i can check "Advanced G/L account determination check box". I am in SAP B1 9.0 PL15. Please can you publish a screen shot.
it's urgent please.
Thanks

Error message "Tax code V1 does not appear in any G/L account item"

Hi,
I am getting the error message FF753- Tax code V1 does not appear in any G/L account item when I post a subsequent credit via miro.
It does not give the error with invoice or credit memo for the sames GL accounts.
History:
PO created
Goods receipt
Invoice posted and blocked as value greater than PO
Subsequent credit put on to correct the values in price query - error appears
I know if I go to FS02 and make the GL code * tax relevant it will remove the error but we dont want tax to go to this account as its a main inventory GL code.
Can anyone advise why it would appear on the subsequent credit but not on invoices or credits.
Also is there something I can set up to remove this issue apart from making the GL code tax relevant - it must not need it if the other postings work ok.
Thanks

Doesnt matter that it works for credits and invoices with blank tax you still need to put * in GL code for subsequent credit etc postings

Tax code error - Message no. F5 113

Dear Team,
I am facing an error message while changing the tax rate for specific country. The entry was already existing and only the rate was changed.
When trying to post an invoice the error message appears:
Acct determination not defined for trans. OFF in chart of accts GROC
Message no. F5 113
Diagnosis
An automatic posting cannot be created because the account determination for transaction OFF with keys is not defined in chart of accounts GROC.
What could be missing since the original tax rate works and this one is failing?
Any help is welcome
Regards

Hi,
Please check the following in your customising.
1) OBXL : Financial Accounting>Accounts Recievable and accounts payable>
business transactions>incomming payments>payment recp global settings>
overpayment/underpayment>Define accounts for payment differences.
2) In your G/L Account, the field status for REASON CODES should be set
   to optional. Do not suppress this field.
3) The customer must be assigned to a Tolerance Group in master record.
Also you should customize the accounts
that should be used by the clearing program in the following path:
Financial Accounting -> Accounts Receivable and Accounts Payable
   -> Business Transactions -> Outgoing Payments -> Manual Outgoing
   Payments -> Overpayment/Underpayment
     -> Define Reason Codes (Manual Outgoing Payments)
     -> Define Accounts for Payment Differences(Manual Outgoing Payment)
You have to define the accounts for reason code ' ' (space).
fbkp: automatic postings-> Cash discount and payment differences
-> stk-> CoA
Also check note 5693.
Kind Regards,
Fernando Evangelista

Error Message FF747 -The tax amount must not be greater than the tax base

Hello,
We are attempting to post an import vendor invoice through transaction FB60 for Israel company code . Since the tax charged by the vendor is not fixed every time , we are entering the tax amount in the FB60 screen manually , without selecting 'calculate tax'.The amount of tax is greater than the amount of expense as per the real business scenario. For example amount of expense is 100, amount of tax is 200 and the total amount charged by the vendor is 300 .However when we simulate the posting we get an error - The tax amount must not be greater than the tax base-Message no. FF747
We tried putting a very high percentage in the tax code also but it didn't help
We would like to go ahead with this posting. Could you pl throw light on the same . ? Is there any way (OSS note ) or a work around which can resolve the issue ?
Best Regards
Amit Kulkarni

Hello
This may be a work around in other cases , but since we want the amount to be updated in the BSET table for further VAT reports , we would like this to be posted along with the expense item

The Error Message in Tax Code determination Set up At the time of updation

When I update the taxcode in the Valid Period-Setup Form Taxcode determination Forms of the SAP, an error message occur "THE COMBINATION OF KEY FIELDS CANNOT BE DUPLICATED" in the status bar at the time of Update button pressed.what is the reason for this error message? how can I overcome the above error msg and update the taxcode ?

What is your B1 version and PL? You may check this: Re: Problem related to the Cenvat Tax Code
Thanks,
Gordon

Error in number. of withholding tax certificate, Message no. 7Q - Argentina

Hi experts
I have an issue when paying an invoice through out transaction code FBZ2.
The invoice to be paid has a withholding tax. After simulating the payment and try to save it system pops up error message u201C
u201CError in numbering of withholding tax certificate Message no. 7Q626u201D
and system suggest to Check Customizing settings for withholding tax certificate numbering
I have checked it and it seems everything is ok.
I debug the program and clearly see how system is attempting to create new payment doc. But however always getting the same error message and I can not find out where the error is.
With Transaction code SNUM (OBZZ) and object WITH_CTNO1 for our numbering group 000001 we maintain the number range. I also fixed a high number to avoid any error but again same error.
I am lost. Please help !!

Solved.
I forgot to enter the Branch in FBZ2

Extra sales tax Tallinn, Estonia, but error message FF753

Hi all,
Our customer in Estonia shall have an extra sales tax to their ordinary VAT. The new sales tax will apply from 1 of June 2010 according to new legal requirements. The invoicing to customer should be like this:
Price without VAT: 100
VAT 20%: 20
Sales tax 1%: 1
Total: 121
At first I have not understood if this tax should apply on ordinary advance return for tax on sales but I guess so and why I created a new outgoing tax code with 1% VAT but to a new G/L account than the ordinary tax code. The new tax code also had accounting key MWS and condition type MWAS as the ordinary.
When my SD-consultat created an ordinary invoice the ordinary tax code with 20% (U2) was posted to. But when he later should post a new invoice he had created a new condition type for this new sales tax: ZSTX. Calculation was done correct but no accounting document was created due to error message FF753; Tax code U2 does not appear in any G/L account item (U2 was the ordinary tax code).
The tax codes look like this:
Sales tax, new, S1:
Output tax MWS 1% 110 100 MWAS
Ordinary Tax code, old, U2:
Oútput tax MWS 20% 110 100 MWAS
In invoice it is like this:
Condition type: MWSI output tax 20%
Condition type: ZSTX sales tax 1%
Calculation was correct but no accounting document according to error message FF753.
I wonder if I must create a new condition type instead of MWAS but I don´t know?
I am not good in tax and not in SD so please help me how we can post one tax amount to one tax code and one to another.
BR L

Hi Lisa,
Check the Note 1076560 - FF 753: SD tax doc if tax code has more than one condition.
Might be it is a program error, just check.
Thanks and regards
Praveen.J

KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE

제품 : FIN_AP
작성날짜 : 2002-12-02
KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE
===================================================================
PURPOSE
Multi-Org 환경속에서 Kr Tax Localization Report 실행시의 ORA-20000, ORA-06512 Error Message 를 해결한다.
Problem Description
Kr Tax Localization의 Reports가 Error를 발생하고, View Log를 통해 확인한 Message가 다음과 같을 경우
ORA-20000: APP-00001: Unable to find message:
AR_NO_ROW_IN_SYSTEM_PARAMETERS
ORA-06512: "APPS.ARP_STANDARD", 줄 999에서
ORA-06512: "APPS.ARP_STANDARD", 줄 2246에서
ORA-06512: "APPS.ARP_UTIL", 줄 29에서
ORA-06512: "APPS.ARP_UTIL_TAX", 줄 111에서
ORA-06512: "APPS.ARP_TAX_EXTRACT", 줄 6178에서
ORA-06512: 줄 1에서
Workaround
Solution Description
1) fnd_client_info.set_org_context(<org_id>);
or
2) v_org_id varchar2(10);
v_org_id := fnd_profile.value('ORG_ID');
fnd_client_info.set_org_context(v_org_id);
.rdf 의 경우 : Before Report Trigger 에 추가
.sql (Package Body, Procedure) 의 경우 : 각 Begin 절 이후
Reference Documents
-------------------

제품 : FIN_AP
작성날짜 : 2002-12-02
KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE
===================================================================
PURPOSE
Multi-Org 환경속에서 Kr Tax Localization Report 실행시의 ORA-20000, ORA-06512 Error Message 를 해결한다.
Problem Description
Kr Tax Localization의 Reports가 Error를 발생하고, View Log를 통해 확인한 Message가 다음과 같을 경우
ORA-20000: APP-00001: Unable to find message:
AR_NO_ROW_IN_SYSTEM_PARAMETERS
ORA-06512: "APPS.ARP_STANDARD", 줄 999에서
ORA-06512: "APPS.ARP_STANDARD", 줄 2246에서
ORA-06512: "APPS.ARP_UTIL", 줄 29에서
ORA-06512: "APPS.ARP_UTIL_TAX", 줄 111에서
ORA-06512: "APPS.ARP_TAX_EXTRACT", 줄 6178에서
ORA-06512: 줄 1에서
Workaround
Solution Description
1) fnd_client_info.set_org_context(<org_id>);
or
2) v_org_id varchar2(10);
v_org_id := fnd_profile.value('ORG_ID');
fnd_client_info.set_org_context(v_org_id);
.rdf 의 경우 : Before Report Trigger 에 추가
.sql (Package Body, Procedure) 의 경우 : 각 Begin 절 이후
Reference Documents
-------------------

BSI error message in US payroll log

Hi,
I have updated the configuration for a new US tax authority (Mount Lebanon). When I run payroll for the employee that the change effects, I get the following BSI error message:
"1044 Your request to use the additional tax code 9 for the Mount Lebanon local service tax is not allowed. This tax has been calculated using no additional tax. BSI Tax Calculation."
In fact, it didn't calculate the tax. How do I resolve this?
Thanks,
Nic

I'm encountering the same area for the Local Services Tax, but for a different tax authority. I believe I have all the tax config in place, but I must have missed something. Is there anything particular that you remember about the error or the config?

Error Message: Messed up File

I completed a very large complex project in Photoshop, and had a complex path copied to my clipboard from Illustrator and was pasting it into PS. I placed it as a shape and got the following error message:
Could not complete the Open command because the path is too complex
O.K., I can live with that, EXCEPT my document, while it opens, has ZERO layers.
Is there any way to recover?

Hi. I don't know if you still need this. It could be useful for whoever else gets this error. I just had this problem too. I had a couple of very complex paths imported from Illustrator and I think other vector masks just took the file over board, so that when I next opened it I received that same message: "Could not complete task because the path is too complex" Here is a workaround that I found.
You can still use the Move Tool(shortcut key "v") to select layers and there are a couple of things you can do with it.
1.You can create a new PS file of the same dimensions (and most importantly same resolution or the scales will be different).
a) make sure the "corrupted" and the new files are side by side or overlapping so that you can see edges of both...
b)Right click the erroneous document and choose the layer you want to move from the context menu. (You may get the "path too complex" message again when you do anything with the document, just click "ok")
c)Click and drag the layer from old document into the new.
d)Continue with all layers if desired.
2. Figure out which layer(s) might be taxing the document with paths and either move just that one into a different document or delete it.
a)To delete go to "Layer" menu --> "Delete" --> "Layer"
It worked for me. Best if you are in the habit of naming your files.

How do I password protect a pdf file - getting error messages?

I'm trying to protect a pdf file (i.e. a tax return printed to PDF) with password to open and password to modify. However I'm getting an error message in a pop up window saying..."The file may be read-only, or another user may have it open. Please save document with a different name, or in a different folder." I'm using WIN 8.1. and I'm using Adobe Acrobat Pro XI (student / teacher version). This is a standalone PC so I can't imaging someone else is using this file. Also I've tried renaming and saving to a different folder (from the folder the original file is saved). I've also looked at properties of the PDF file and its not tagged as read only. Please advise if I'm missing something. Thanks for your help.

Thanks for responding...I'm getting the same message that I got at first..."The file may be read-only, or another user may have it open. Please save document with a different name, or in a different folder."
The next day I emailed the file to my work PC and encrypted it with no problems. I have WIN 7 and am using Acrobat 8.0 there. So the problem seems to be with my new PC here at home (i.e. WIN 8.1 and Acrobat XI). Frustrating. I'm betting its some obscure setting in WIN or Acrobat, that is way over my head. Please let me know if you have any ideas. Thanks again.
Phil

Tax error message

Similar Messages

Maybe you are looking for