Tax Management setting - goods and services

Hello SAP experts,
In my DMEE for tax declaration (tree type USM1), I need to distinguish tax codes for goods and tax codes for services.
Is there any setting to distingsuish both type of tax? I have checked the data dictionary for table T007A but I did not find anything relevant.
If you have any suggestion, please let me know.
Thanks for your help,
Cheers,
Karim

Hi,
Go to The Bellow Link
http://help.sap.com/saphelp_470/helpdata/en/8e/a2053b2b19da4ee10000000a11402f/content.htm
Thanks,
Raviteja

Similar Messages

Same vendor for procuring Goods and Services

Dear all,
Is it possible to procure goods and services (eg, freight services) from the same vendor?
If possible, are there any settings to be done in the vendor master or in the POs?
Thanks
Shankar

Hi,
You can procure material and service (Fright) charges from same vendor.
At the time of purchase order creation you can assign condition type for fright charges at item detail level >> Condition tab of purchase order.
After enter material detail go in condition tab and select condition type for fright charges.
Regards,
Mahesh Wagh

What would be the % fee that india seller will have to pay if i send money for goods and service

how much would be the % fee that a seller in india will have to pay if i send money through goods and services they want me to add it on is it about 6%

Hello Sister! How are you? I found this link on how to install it, but i have not tried it. here it is: http://www.makaboy.net/procedures/installing-the-watchtower-library-onto-your-ap ple-ipod-iphone-ipad-and-other-platforms-using-isilo-and-meekspace/#axzz2VvgCqHz h
You can also make a link to the online Watchtower Library, just go to this link: wol.jw.org. Then click on the share button. Then Click add to home screen. Then type in what you want the link to be called (like Watchtower Library). Then click add. A link will then be on your home page. when you tap on it, it will take you right to the Watchtower Online Library (but you will need to be on the internet to go to the page)
Hope This Helps!
Mini Apple Genuis

Services managed by material and service master.

Hi,
why managing services by <b>material master</b> and
why by <b>service master</b>?
Best regards

Hi
use of service master
The service master record counts as part of the master data within External Services Management and serves as a source of data for you to draw upon when creating service specifications. This enables you to save time and reduces the frequency of errors, since you need only enter the complete service descriptions in the service master record once.
http://help.sap.com/saphelp_erp2005/helpdata/EN/61/16270a337f11d396c500609419f2fc/frameset.htm
generaly when service is specific and one line only we go for material master
Vishal...

VAT tax accruals, set off and G/L recording

Hi,
We have a requirement as follows:
1. When we receive the invoice from the vendor, then in MIRO (or F-43 or FB10, whatever we may use) this VAT amount needs to post to a certain G/L account, say 'X'. for VAT accruals - I assume we can achieve this in OMWB.
2. When we pay the invoice, the same amount needs to move to another G/L we want to keep as Vat Clearing account, say 'Y'
3. At the end of the month, we need to move this amount from 'Y' to another one 'Z', as Prepaid VAT
While 1 seems straightforward, I need some guidance on how to achieve 2 and 3. Appreciate any help...
Many thanks.

Hi Suma,
The only way in which you can get differences between FA and GL is if someone has posted manually into the GL accounts (assuming that the assets/GL were correct at the beginnign of the year. Actually, you could also have depreciation posting jobs that have not posted properly, so you cna check that up as well.
So there are a few things you can do - check that all the asset GL accounts are set up as asset recon accounts (i.e. you cannot post to them manually)
Then you can check the GL accounts for funny document types (SA, AB etc.) - check for any postings made using journals, not asset purchase, scrap, depreciation etc.
Assuming you find them, you need to find out who made those postings and why. After you have shot them you can reverse those postings and your assets and GL should be in balance again.
Hopefully those should find your problem for you.
Regards,
Tony

Material Description not showing in the internal goods and services catalog

Hello All,
I have replicated materials from backend. They have all been successfully replicated and I can see everything in COMMPR01. But when we create a shopping cart using the internal catalog only the material number and system show up. We are on SRN server 5.5 support pack 15. Any help will be really appreciated.
Thanks,

Hi Donna,
Check, if you have description in correct language.
For example:
If you replicate materials with English names (description only in english) and you login to the SRM using for example Italian, the description of the material will be empty.
There is a Description table in COMMPR01 transaction on the General tab (bottom of the screen).
Regards,
Marcin

Cash sales and services

Dear SAP gurus,
I should add a Service item in my cash sales order.
I created a new item type, but it seems that as I cannot create automatically a delivery for the service item, then I cannot bill my service item.
Does anyone used the functionality of cash sales with services ?
Thanks
Antonio

1) Schedule line category CD (for Service) does NOT have Item relevant for delivery. That is the reason why you do not get automatic delivery for this line item. & that is correct, as service is not supposed to be delivered (like a TV or a Washing machine)
2) You can use Cash sales process for both goods and services.
- The print out of the invoice, printed immediately when the sales order is saved, must have the details (prices etc.) of the service item too. Check this.
- In VTFA, for line item TAD, copy requirement must be choosen as Billing doc creation possible without PGI (just check which one it is by pressing F4)
- In VOV7 for BVN and TAD, Billing relevance must be B order related
3) Process would be as follows -
Sales order created with TV (TAN), Installation of TV (TAD) --> Delivery created ONLY with line item TV, Billing document created (RD03) with both line items
customer takes his goods, pays for goods and services and leaves
--> in VL02N do picking and PGI for TV --> in VF01 give sales order # and create billing document for both items.

Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

Regarding TDS and Service Tax

Hi experts
I want to create invoice for the vendor catg professional services rendered - General
The Gross Amount is 50000. We are mainiaining the Service Tax Codes also. I want to know the TDS and Service Tax updations for that amountwise entries like..
Ther service tax ecess surchage like accouts will be accumulate with debit balances. What is the further process for these service accounts.
thanks in advance
srinu

Hi Srinivas,
Can you please tell me how the service tax will get calculated in rental conditions?
I've made the following configuration settings:
Step1: RE-Fx>> Accounting>> Automatically Generated Accounting Documents>> Summarize Documents:
Under this node>> Set Item Summarization "Active" for the particular co. code.
Step 2: Defined service tax under "Tax Type" for country INDIA
Step3: Under the IMG node:
RE-Fx>> Accounting>> Integration FI-GL, FI-AR, FI-AP>> Assign Tax Code:
I've maintained Service Tax (tax type) to the country IN.
Also in the contract under posting parameters tab; i've maintained the Tax Type as Service Tax.
In conditions tab also, when I'm simulating the condition, I'm getting the correct entries, (as shown in the screen shot):
Condition Amount: 20,0000 INR
Net Cnd Crrncy: 20,000 INR (for the month of July)
Tax Cnd Crrncy: 2472 INR.
However, when I'm doing RERAPP; i'm unable to post the condition. Getting the 2 errors (screen shot attached):
1) Tax code S2 does not exist in company code E500
2) Taxes by item is activated; consequently, transfer by item is mandatory
Kindly pl. assist where I'm going worng or any configuration missing due to which I'm unable to execute RERAPP for a condition (with service tax calcultaion) for a commercial lease in contract.
Thanks
Shantanu Kar

How to set upper and lower limit for service notification in SPRO

Hello everyone,
Good morning....!!
I am new to SAP PM and to SCN as well.
I have a question on Service notification user status.
I have notification profile configured in SAP as below:
Status no      Status          Short text              Lower limit          Upper limit
5                  REGD          Registered                1                          70
10                PCKS            Pack sent                  1                          70
20                APRC            Application received 1                        70
etc..
I want the statusesto be set as navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
for more details please check my attachment.
Thanks in advance..!!
Regards,
Sudha.

Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
Just I made replica of your profile. I could able to change (even without saving the order).

10.3 registering Admin and Managed server as windows service.

I have not found anything in the new documentation on how to do this which left me wondering if there is a reason it was omitted? I found procedures from the 8.1 docs but would rather have something more up to date. I'm installing on win 2003 server. Thank you.
Edit: I found the installSvc.cmd script in the %wlshome%\server\bin directory and tried it. According to instructions you set SERVER_NAME and then call the script. It seems to install the services ok but when I start them they stop immediately with no specific errors in event viewer.

Dear,
I assume you now have at least 3 windows services:
-node manager service
-adminserver service
-1 or more service for your managed servers (which start after adminserver service)
All of them start on system startup.
My question: If let's say one managed server crashes, is it then automatically restarted by the nodemanager? Since the managed server is not started by node manager itself, I guess the answer is no. If so, what is the usage of having nodemanager running as a service?
Thanks.

Manager Manager and Prompt Manager going out of service

Hi,
I have set up RTMT to email me syslogs so I can see if there is a problem with UCCX.
Whenever I upload a new prompt or create a new folder I am seeing error messages saying that Manager Manager and Prompt Manager are in partial service.
But when I look at Network Services in Serviceability, there's nothing there - everything is in service.
So the error messages could be incorrect, or the managers are going out of service and then back again into service quickly.
How can I track down this problem/stop it happening?
In one sense it isn't a real problem, but it is annoying as I may ignore real issues.
Thanks
Jemima
UCCX 8.0

Did you try to set it up as new device again? How to back up your data and set up as a new device

Firefox process keeps running. I cannot open a new session until I manually stop Firefox 32 process in tax manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

Firefox process keeps running. I cannot open a new session until I manually stop Firefox 32 process in tax manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

Firefox is already running but is not responding
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
Firefox Hang at Exit
* https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
Check and tell if its working.

After installing and configuring Workflow Manager and Service Bus, I'm getting 403.

I've spent the day installing SharePoint 2013 on a Windows Server 2012 environment. This server is not the domain controller. Following instructions on how to install and configure Workflow Manager and service bus, it appears although I'm following the instructions
(and I get no errors), something is not working.
If I try to go to the website that it creates in IIS
http://localhost:12291 I get a 403 error. Also if I perform the powershell query to get the port number "Get-WFFarm | ft WFMgmtHttpPort" I don't get any value returned to me.
Until I validate that the Workflow Manager is installed and working, I will not attempt to pair it to the SharePoint 2013 farm. Which hopefully makes this a Workflow Manager question not a SharePoint issue.
Can anyone offer any suggestions please? Should I even get a valid webpage if I hit localhost:12291? According to one walkthrough I've looked at I should get an XML display of workflow and security configurations.

I experienced the same two issues mentioned in this thread today.
Regarding the proper XML not appearing at <workflowhost>:12291 I was experiencing the same with an error message in Chrome saying the caller lacked read permissions, and 403 in IE. I had checked IIS, database permissions and connections and more.
All of the setup messages and status checks were a-okay. I voted Zimo's comment as helpful because it cued me in to examine the service in Central Administration - where I found there was no administrator assigned to the workflow service. As soon as that was
done, the workflow host site was brows-able.
The resolution to SharePoint Designer not offering 2013 workflows as an option was in my case that there was an additional WFE on which I had not installed the Workflow Manager
Client. This is noted with a bright yellow box in the section about configuring workflow with HTTP here:
http://technet.microsoft.com/en-us/library/jj658588(v=office.15)
If puzzles are good for your BRAIN then SharePoint will keep it really healthy!
Ramona Maxwell MCPD
SharePoint 2010, MCITP
SQL Server 2008

Creation of Service Product with Set Type and Attribute

Dear All,
Please guide me with proper step by step process,
How to create the product with the set type and attribute for service industry in sap crm 7.0
Regards,

Hi Nitin,
Before creating the Service type of product, you have to define the Base category for Service type product. Generally the category for service will be created under the R3 hierarchy R3PRODSTYPE. You can create this category using the TCode:
COMM_HIERARCHY. Here you have to select the product type as Service and have to assign the set types to the category.
You can create a service product using the transaction : COMMPR01 -> Click on Service ICON -> Select the Category for Service Type. Then fill in the details for Service Product description, Service ID(Based on number range settings for products), Language.
Also fill other details like Base Unit of measure, Pricing condition for different sales areas for the service product.
Since you are using CRM7.0, you can do all these activities using a POWER USER role.
For more information about Set types and hierarchies please refer the following help link:
http://help.sap.com/saphelp_crm70/helpdata/EN/46/57672501a208e7e10000000a114a6b/frameset.htm
Hope this helps!
Regards,
Chethan

Tax Management setting - goods and services

Similar Messages

Maybe you are looking for