Tax Percentage in FTXP

Dear All,
Please go thru it....I have to calculate tax for PO and I have created a Tax code, can I put tax percentage for different Condition types like JMOP, JEC1, JVRD, JSEP in FTXP, so that Basic Excise duty, Ecess, Secss and Vat could be calculated....
Regards
KK

hi
In that
you mainatain tax rate as per tax codes( you use one dummy tax and the one you use) then where evr you use that tax code rates will be copied irespective of material and vendor.
eg
you enter
T1 16 V0(dummy code)
Regards,
vijay

Similar Messages

Update decimal places in sales and use tax percentage rate [FTXP]

i need to update the decimal places in the tax percentage rate. i've gone through all of the tax configuration in the img several times and it is not there. have searched the internet for an answer to this, and am not finding it. need to update from four digits to the right of the decimal to five digits to the right of the decimal point.
for example, adjusting a tax rate field of 5.1234 to 5.12345, where the field will allow 5 digits.

Hi,
SAP has hardcoded in the program MF82TI00 to pick only the three places after decimal. Rest will be ignored.
In case this is your legal requirement, I will suggest to rather create an OSS message with SAP.
Regards,
Gaurav

How to change the percentage of tax code on ftxp

i have wrongly enter the percentage of tax code while creating tax code in FTXP so plz suggest me how i can change it

Dear Saumya,
Reverse the accouting document which is already craeted for your invoice no., you FI consultant will help in doing so. After reversing the accouting entries update the Tax condition type with respective rate applicable and use update funcionality in VF02 and save the Invoice. This will solve your problem.
I would like to suggest to use posting block funcionality to minimize this issue if it occuring repeatitly.
If the solution proposed is helpfull please reward points and close.
Thanks.
Sumeet Sah

Change in Tax percentage

Hi ,
Will any one help to find out following requirement.
Tax percentage in one tax code(tax code V1) seems to be changed in FTXP to 17.5%.If I want to check earlier tax percentage and date on which it was changed in which table I can get it.
Thanks & Regards
SAP learner.

Hi,
Thanks for reply.I have following queries.
1) STA1 is structure and not table.Can you give table name.
2)You have mentioned go to Administration->Setup->Financials->Tax->Tax Types.I have search in SPRO but could not get this path.Will you please give detail path in SPRO.
Thanks & Regards
SAP learner

Tax percentage

hi gurus what is tax percentage?
how to calculate it? it is compulsory?

Dear raghu ram
Yes tax is compulsory.
tax is nothing but the amount we are paying to Government from our earnings. It may be Income tax if we pay tax against our income and sales tax if we pay against the sales made.
Government has stipulated certain percentage on all these and it differs from state to state.
In SAP, tax percentage are maintained in FTXP for the combination of country of origin and tax code.
thanks
G. Lakshmipathi

UK Payroll TAX percentage of a wage type

Hi,
Could you please help me will a way of find the Tax percentage deducted for a wage type. I am running UK payroll and finding a difference in Tax deduction. Your expertise will help me to identify the issue.
Please help me in this.
Kind Regards,
Suresh G

What exactly is your problem. UK tax is on a cumulative basis, and typically there are slabs with different rates, so it is difficult too work out a percentage for each wagetype.

Creating a tax code in FTXP I can't fill in an account for NVV

Creating a tax code in FTXP,
for my tax code I've filled in a Tax Percent. Rate for Transaction Key NVV but SAP doesn't allow me to fill in an account for this
Transaction Key in the tab tax accounts.
What cuold it depend on?
Thanks

Hi,
Well NVV account key in sap standard is a non deductible key and it would not be display in OB40 for account assignment.
If you see NVV properties in OBCN it will display check box ticked for not deductible and posting indicat. 3.But if you want to use it for tax posting untick that check box and change posting indicator to 2.
Then it will show that key NVV in OB40 and let you assign gl for this key.
Regards
Arun

Change of Tax Percentage in Existing Billing documents

Hi,
we have created 100's of billing documents with 11% to customers. Later we realized that we should charge them 0% instead of 11%. we have even released them to accounting however we did not receive the payment yet. I made changes so that any billing docs created from today will have 0% percent but my client wants to re-issue all the previous invoices to customers with 0%. I have not worked on any of these but i have few thoughts
1) Reverse the Accounting Document and Billing document and update the condition type to 0% and re-issue the billing document
2) There is something called Invoice correction document which issues something like credit or debit memo for the changes in Billing document.
3) create a utility program to mass change all the billing documents.
4) I am not sure about this but how about issuing a credit note and then re-issue the invoice but not sure how to re-issue with the modifications in Tax Percentage
Could you please throw some expert opinions on the above or any other options of consider. Also please advise on configuration settings for any needed.
Since I have not worked on any of the four, I could not recommend my client about this but needed opinion before actually recommending.

Hi,
What you said is right with respect to retrospective billiing.
In case of credit note, you are not issuing your invoice again. You are just releasing a credit note with respect to the issued invoice. Hence a reference is maintained between these two. This is the best way to follow.
Raghu

What's the difference between tax account in FTXP and OB40

Hi all,
There are two tax accounts link to same tax code in FTXP for different company codes, but in OB40 I only can assign one account to tax code. What's the difference between tax account in FTXP and OB40?
Thanks in advance.
babyyw
Edited by: babyyw on May 5, 2010 8:21 AM

Hi,
FTXP no need to create a request and it is easy but in OB40 system will ask you create request. and another thing is in FTXP it is at country level but in OB40 it is at chart of accounts level.

Which table stores the Tax percentage rate of commercial invoice?

Which data base table stores the tax percentage rate of the items in a commercial invoice? Or which FM can return the tax percentage rate?

HI,
Don't post the duplicate threads for same requirement...it against to the SCN rules. Moderator can delete this thread.
Report to Moderator!!!

Total tax percentage in table

Hi,
We want to prepare one report with tax code and tax percentage.In one tax code different condiiton exists.In such case is their any table in which we can get total tax.
For example Country code BE tax code DA input tax is 10% (condition type MWVS) and non.ded.input tax 10% (condition type MWVN).In such case in which table can we get total tax against tax code DA.Their are different condition types for different tax codes so cannot generalised this.
Thanks & Regards
Vinay

No reply hence closing this thread.
Vinay

Tax percentage and gross amount

We have a requirement (South Africa) where we have the gross amount (final selling price) and tax percentage. The net amount and tax amount has to be back calculated from the gross amount.
For example:
Gross price = 100 ZAR
Tax % = 15%
Therefore, the pricing should be as below:
Net amount = 86.96 ZAR
Tax amount = 13.04 ZAR
Gross amount = 100 ZAR
What is the best approach to handle this pricing scenario in SAP?
Is there is an option in standard SAP that can do the net amount calculation based on gross amount and tax percentage?
Thanks in advance for your help.
Shan

Check this
[Re: Tax inclusive in base price|Tax inclusive in base price;
G. Lakshmipathi

The Table used to store the Tax Percentage

Hi,
Do U know the table that is used to store the Tax Percentage when a Sales Order is Saved. Also when a Billing is done usually the Tax Percentage will be taken from the relating Sales Order detail, does the Tax Percentage get saved in a Table at Billing Time? and what's the Table used.
Thanks
Kishan

Hi,
i assume: tables konh and konp
Andreas

What is the tax percentage on the Macbook Pro with Retina Display in the US

I am interested in buying the new Macbook Pro with Retina Display. I would just like to know what the tax percentage of the price is when buying in the US???

The price quoted does not include tax which is determined by the state/city where sold. There is not a Federal tax as in Europe with the VAT.
State taxes can run 3-10% or somewhere in that range.

TAX percentage to SNC

Hi Folks,
Is there anyway to transfer the Tax percentage details to SNC, i know we can/should maintain it manually in SNC(/SCA/52000001) but looking for some option to update it from ECC.
Since we are rolling out SNC in diffrent countries it will be difficult to maintain it manually everytime.
Regards,
Vasu

HI,
Fllow the below path..........
SPRO=>IMG=>FA(NEW)=>FA GOBAL SETTING=>TAX ON SALES/PURCHASE=>BASIC SETING=>CHECK CALCULATION PROCEDURE=>DEFINE CONDITION TYPES.
Here you select your condition types and check the access sequence.
I think it is help for you.
Regards,
Spradip

Tax Percentage in FTXP

Similar Messages

Maybe you are looking for