Taxes condition table - missing.
Hello Gurus,
We have one situation where in our client is facing an error while creating a sales order(trading)- the error : condition table missing access JST1(pricing- taxes)missing. what can be the causes and solution?
Regards,
Raj
hi
check the access seq JST1 from the following route
SPRO > Financial Accounting >Financial Accounting Global Settings > Tax on Sales/Purchases > Basic Settings > Check Calculation Procedure > Access sequece
There might b the condition table missing, either enter valid conditon table or remove the ACNO(acess no) from the JST1 access sequene.
reg
Deepak
Similar Messages
-
Condition table missing: Access JST1 60 (Pricing Taxes)
Dear All,
We had gone for the updation of patches related to 2007-08 budget changes. Our SAP version is 4.7EE.
We are getting the below message, when giving the tax code in purchase order creation.
"Condition table missing: Access JST1 60 (Pricing Taxes)"
TAXINJ is being used.
Please provide a solution on this issue.
Regards,
Venkat.check all the condition type and there access sequences
-
Hi,
In sales order I am getting a Stop saying: "Condition table missing zz00 01 (output shipping)
Any ideas of how to solve this problem?Hi Vamsee,
Looks like SD config made some changes to pricing conditions for sales order. If you are getting the error in development system, they would have deleted some pricing table which was there before and it is referred in some user exit. If you are getting the error in QA system/Prod, config changes are completely transported.
Please check condition table exists in the system, If not please inform the SD config contact.
Reward points if it helps,
Regards,
Anil -
Condition table missing : Access Z002 50 ( Pricing Purchasing)
Hai SAP,
Need your help to assist me in the problem,
When i creating Purchase order, the pricing schema does not appear. when i click on the Analysis Button on the condition tab, system tall me that " Condition table missing : Access Z002 50 ( Pricing Purchasing) " .
why this thing happen ?Hi
Check the schema group vendor for that vendor in vendor master
using that track the Pricing procedure to which it is assigned
then check the condition table for that access sequence z002
Regards
Amuthan M -
Re : Condition table missing: Access Y003 10 (Output Inventory Management)
Hi
While doing migo using movement type 501 the following error is coming.
"Condition table missing: Access Y003 10 (Output Inventory Management)"
How to solve this.
Thanks
AntoHi
After creation of PO, any body chaged the access sequence?
Check this out in SPRO- SAP IMG- Material Management- Purchasing- Conditions- Define Price determination process - Define access sequence.
Regards,
Raman -
Tax condition table for an access sequence
Hi,
I serched in the forums to find t.code or menu path for creating a tax condition table for MWST tax condition type, but no body has given any specific answer. most of them have given the SD or MM related condition tables.
My requirement is, I want to create a key combination for "MWST" TAX condition type. Please let me know the process of creating the key combination for TAX condition type.
Thanks in advance.
AnilHi
MWST is the standard progarm access sequence
condition type is base to calculation of main the tax procedure
but the thing the access sequence and conition type are pure MM, SD Work,
if you need to table :
T685,T685A,T685T,
are else you use Z table with the help of technical consultants'
Thanks
Madhu -
KONV table contains PO condition types like freight, discount etc.
Likewie, which table contains Tax condition types like excise, VAT, CST etc (JMOP, JIPS, JIPC etc)?
regards
VSHi,
Excise Duty - Table J_1IMATEXP ,J_1IMTCHID
for Tax - Table BSET
Dhruba -
hi experts,
when any purchase order is created in development server the system is giving error message :" condition table missing:Acess JST1 60(pricing taxes)
Can any one tell me what is the reason behind that? how to solve the error?
SudiptoHi,
thanks for your early response.
the error message no. is VE305
please help me out.
Sudipto -
Mandatory Condition Output Tax MWSI is missing
Hello Experts,
We have a situation where the access sequence MWST is using the customer specific tables A509, A902, A906, A908Hello Experts,
We have a situation where the leading system is ECC and the pricing
procedures, condition types and condition tables are downloaded to the CRM
system. The access sequence MWST used for the condition type MWSI in the
pricing procedure is using the customer specific tables A509, A902, A906, A908.
We got these tables developed in the CRM system as they did not existed
earlier using the below given SAP Notes and blogs:
514952
- Download of customer-specific tables
441083 - Transferring conditions for
material group MATKL to CRM
https://scn.sap.com/community/crm/master-data-and-middleware/blog/2014/02/11/condition-master-data--customizing-download
1070997 - Condition
download:Parameter BADI CND_MAP_CNV_FIELD .
As a result the customer specific condition tables are
created and filled in the CRM system after the downloads.
But, when we are creating an order, we are getting an error Mandatory
Condition Output Tax MWSI is missing and the tax is not determined
in the transaction.
Do we have to do some additional developments to get the
taxes determined in the CRM system.
Thanks,
Rishit -
Sales Order Unable to Use New Condition Tables for Tax Condition Type
Dear All,
I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
I wonder if anyone encountered the same problem as me.
Kindly advise.
Thank you.
Regards,
YvonneHi
Yvonne
I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
Secondly for tax purposes I suggest Try to have Customer and material tax classification approach this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
This information can be passed on to FI using Different Tax code for Different combination.
I hope this helps
Regards
Mandar -
Cannot determine the table name that contains the tax condition sets. The order number on the tax conditions sets got out of sequence and have a tough time determining what is the next sequence number. Does someone know which table has this information in it.
Edited by: user10433852 on Jun 22, 2012 2:05 PMHi Aditya,
thanks for your reply.
I have used FM CALCULATE_TAX_FROM_NET_AMOUNT and my problem has been solved.
thanks and regards,
Murali -
Dear Experts,
I want to capture the data of tax conditions and print the same on the P.O. print. Please tell me in which tables the data of Purchase Order taxes like Excise duties, Vat, Cst, Service tax, Lst, are maintained.
Regards,
AadityaHi
for excise check table J_1IEXCHDR for header
J_1IEXCDTL for item excise
The Table name used to find the Tax Values are
KOMV: Pricing Communications-Condition Record
KONV: Conditions (Transaction Data)
From the above tables you can refer the fields below.
KAWRT
KBETR
Fetch the corresponding records based on the field
KNTYP
refer following
[Link1|http://sample-code-abap.blogspot.com/2008/06/calculate-tax-of-purchase-order-line.html]
[Link2|calculate pricing PO SAPFM06P medruck;
[link3|Re: Red: P.O. condition values;
[link4|http://www.sapnet.ru/viewtopic.php?t=255] -
Condition Table creation for Taxes (TAXINN)
I want to create a condition table for Taxing procedure with application <b>TX</b> with the following fields : <b>Plant , Control Code</b>
Kindly tell me the SPRO path where i can create a condition table for Taxes.
Regards
JyotsnaDear Jyotsna,
We can create taxes in two ways.one is FICO side and another one is SD side
in FICO side you can do in FTXP
in SD you can do OVK1
hope this helps you
Prem. -
Service Tax Condition record - Table-3 and access sequence MWST
Dear All,
For maintaining the service tax conditon record , it is required to have the condition record to maintain under Tax classification table, which is available in access sequence MWST or we can add this condition table( table no :3) in any other access sequence and that access sequence needs to be assigned in Service tax condition type i.e JSRT, becasue system will check the rates from the table A003 while doing the service tax transfer from intermediate account to service tax account in report RFUMSV50.
But the issue in there is NO validity period defined in the condition table : 3 , which signifies that we can not maintain the service tax condition record along with the validity period.
Is there any way , we can add validity period field in Tax classification table.
and how can we see the maintainace of Taxes table , is there any T.code avaiable for the same, as I could't find the same.\
Please suggest.
Thanks & Regards
NitinHi Nitin,
SD can give validity period for a tax code either for an individual customer or for all the customers through their pricing conditions.
Aravind -
Condition table for access sequence (taxes calculation procedure)
Hi,
We need to perform tax calculation procedure in which there will be fields in condition table for a particular access sequence such that whenever we give the Country, Region and city in the condition table it will pick up the corresponding tax value.
Condition table field -- KOTABNR.
Path -->
FI -- **** -- Taxes on sales / purchase -- Check calculation procedure -- Access sequences.
Select tax calc say for country US with jurisdiction and check acess sequence. There we have condition table referred to as 53 and we can see the fields by clicking on fields.
How to create a new condition table.
Please guide me through asap.
Thanks and regards,
Priyajit GhoshHi,
This does not allow us to create a new condition table. However we are allowed to change a standard SAP standard condition table. Is there any way to create a new Z table (condition table) . Please revert back asap.
Thanks and regards,
Priyajit
Maybe you are looking for
-
Acrobat standard 9.0 download
I purchased acrobat 9.0 as a download in 2010. I have a serial number. I need the software download again. HELP!
-
Error:Account type D is not defined for document type RE
Hi! I encountered this error msg: "Account type D is not defined for document type RE" while posting IR in mir6. What does this error msg mean? Thanks!
-
Url iview - application sessions maximum reached.
Hi, In a role there is an url iview created for a visual composer application. The role contains four such iviews. When the user clicks in an order say iview1 - iview2 -iview1 - iview2 -iview1 - iview2 . On the seventh time its showing an error. 'The
-
My iPad calendar dropped all my prior year 2013, dates which I need fir reference purposes. I have my calendar set to retain all dates. What's wrong?
-
[SOLVED] MySQL working w/all but myth (can't connect to DB)
Just did ye ol' upgrade and > sudo tail -f /var/lib/mysql/mythbox.err 091121 18:29:38 [Note] /usr/sbin/mysqld: Shutdown complete 091121 18:29:38 mysqld_safe mysqld from pid file /var/lib/mysql/mythbox.pid ended 091121 18:30:51 mysqld_safe Starting my