Taxware User Exit ECC 6.0

Moderator message: do not offer points
Hi Experts,
Working on FYTX0002 user Exit.
I am tyin to write code inside the include within a function module EXIT_SAPLFYTX_USER_001.
Depending upon some condition i need to decide whether or not to call the Taxware RFC,,,,
While creating or changing sales order & purchase orders.
Do Someone know the name of the RFC being called in ECC 6.0.
How do i restrict the RFC from geting called.?
<<Text removed>>
Regards,
Kevin.
Edited by: Matt on Feb 1, 2009 9:17 PM

You can find all function module related to tax calculation in External system under the function group FYTX.
PS : But i don't much info whether these will be used for TAXWARE or VERTEX
Restirct RFC from being called
if condition eq okay
call function 'XXXX'
else.
do nothing
endif.
Is this was you are looking for ?
, a®

Similar Messages

Taxware User Exit.

Hi Experts,
Working on FYTX0002 user Exit.
I am tyin to write code inside the include within a function module EXIT_SAPLFYTX_USER_001.
Depending upon some condition i need to decide whether or not to call the Taxware RFC,,,,
While creating or changing sales order & purchase orders.
Do Someone know the name of the RFC being called in ECC 6.0.
How do i restrict the RFC from geting called.?
<removed_by_moderator>
Regards,
Kevin.
Edited by: Julius Bussche on Jan 30, 2009 9:41 PM

You can find all function module related to tax calculation in External system under the function group FYTX.
PS : But i don't much info whether these will be used for TAXWARE or VERTEX
Restirct RFC from being called
if condition eq okay
call function 'XXXX'
else.
do nothing
endif.
Is this was you are looking for ?
, a®

Does MV45AFZZ user exit trigger when CRM sales order is replicated into ECC

Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.

please check this link
keremgomi=wordpress=com
Rgds
Raj

User exits for FI module in ECC 5.0 Version

Hello,
Can someone help me on this..i need to find a userexit in ECC 5.0 and this is in FI module(please provide me the steps to find as well). I need to do some validations and the exit should trigger at the end of document creation and just before the user clicks save button..Its urgent so i would appreciate a quick reply from anyone who knows about this.
Thanks,
Mohsin

Hi Mohsin,
Welcome to SDN.
You can create new custom program in your ECC 5.0 (Developmen Instance) by cut and paste the following sample program. This program will allow you to find user exist based on transaction code i.e FB50.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Hope this will help.
Regards,
Ferry Lianto

Wt are different ways to find enhancement spots(User Exits) in ECC 6.0??

Hi Friends,
How are you all doing??
Friends relevant answers are awarded points. Pls give solutions..
What are the different ways to find the enhancement spots (i mean user exit points) in ECC 6.0??
I want to find the enhancement spot in sale order transaction (va01/va02) after save happening or else after commit happen. In that i need to call the badi method on_costing_component. So friends could you give solution for this.

Hi
You can see this document for knowing the Userexits for a given Trxn.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/abap-code-samples/userexits%20in%20a%20transaction.doc">Listing UserExits in Transactions</a>
Regards
Raj

Dump is thrown for tcode ko88 in User Exit EXIT_SAPLKEDRCOPA_001 in ECC 6.0

Thanks in advance.
Its very urgent.
In the User Exit EXIT_SAPLKEDRCOPA_001 an import variable I_COPA_ITEM is declared in the import parameter without any type def. So during run time the data object takes the structure of the exported variable. This works fine in the previous versions. But in ECC 6.0 it throws a dump saying that the data object cannot be converted in a unicode enabled program.
What can be done to over come the problem?
Thanks again

Hi!
So i_copy_item could be a number or a character variable - 1 or 2-byte representation. Looks like your implementation has to be of type any, too. With some field symbols (of type any) this should be possible (and at least the syntax check won't understand the coding any longer and does not complain any more
Regards,
Christian

How to create User Exits in ECC 6

Hi Experts,
good day, i'm looking for any notes or learning materials on how to create User Exits in ECC 6. please send me the links.
thanks you for your usual support.

Hello,
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Any Basics u wana know abt Enhancements.,.,go through the link.,
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
Thanks,
Swati

Debug CIF - ECC inbound - User exit CIFORD03 - Planned order to process ord

Hi
While Converting planned orders to process orders from APO to ECC, queues are not getting stop in Inbound ECC.. even after setting CIF user as dialog user and maintaining both CIF user and my user ids in /sapapo/c4 to block queues. maintained the same in ECC CIFGPARAMV table. Outbound queues are stopping in APO, but not able to debug APO outbound queues...
I want to debug user exit CIFORD03 (EXIT_SAPLCORD_005 ) in ECC . Please reply.
Thanks
Sreeni

Hi Sreeni,
The setting in /sapapo/c4 against your user ID would be relevant in this case.
Debugging should be on, and use detailed logging. Also, your RFC user ID should be a dialog user ID or a Service user ID.
Did you make sure that your user ID and the RFC user ID 'in R/3 for APO' have sufficient debug authorizations (including queue debug authorizations)?
(You can find out the RFC user in SM59 in APO against the RFC connection that you have for R/3. )
You should then see a queue stuck in R/3 inbound, where you could enter in debug mode.
If you go to SMQR in R/3, and see a queue called CF, then it's also possible to deregister this CF queue, and then queues will get stuck in R/3 inbound. You could then use this queue for debug if you have sufficient debug authorizations including queue debug.
Thanks - Pawan
Edited by: Pawan Pathak on Feb 16, 2012 1:32 PM

User exits for Material Master in ECC 6.0

Hello,
We would like to have a function for checking descriptions when we are saving a material in the material master. We are today running R/3 on release 4.6C and as I understad there are no user exits at that point for this release. We are going to do an upgrade to ECC 6. Do you know if there are more user exits for the material master for this release?
   Regards
   Ann-Sofie

Following are the user exists available for Material master :-
-> MGA00001
      Enhancement and addition of checks and (limited) changes to data
-> MGA00002
     Control for the material number assignment
-> MGA00003
     Control for the material number display
-> MGV00001
     Distribution via ALE
-> MGV00002
     Read customer-specific filter objects for a material

Needs User-Exit/BADI name for Purchase Order in ECC 5.0

MM Experts,
We are using ECC 5.0. We have a requirement to change the value of standard SAP fields on the line item and header of the PO tables after PO is saved in the system.
I will appreciate if someone can guide me about which BADI or User-Exit I have to use to achieve this.
Rewards will be awarded for helpful tips.
Thanks in advance!
MP

Charlie,
Thanks for your quick reply. Do you have sample code for this BADI. If yes, then can you please let me know your email address .
Thanks.
MP

User Exit for third party order processes.Missing in ECC 6.

Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Could anyone please let me know how I can resolve this issue as I need this User exit for my requirement. Has SAP provided any enhancement spots for this?
I tried to search the enhancement spots and OSS notes but couldnu2019t get any useful information.
Please advice.
Thanks,
Ameesha

changed our requirement

User Exit issue after upgrade from 4.6c to ECC 6.0

Hi Experts,
After upgrade we are facing some issues regarding user exit. In 4.6c we have implemented several user exit to do customization in several module like SD,FI and HR. But after upgrade it has been identified that SAP has already provided this functionality in ECC 6.0. Now our problem is when this transactions are called or executed control is going to both custom and standard code. Which took long time to execute and causing performance issue.
Is there any ways to identify which are the functionality SAP has provided in ECC 6.0 so that we can delete our custom user exits.

Hi
List all the user exits which you have modified and check in OSS notes you will get the OSS note with all the details what functionality has been changed. Based on this you can delete or retain the user exits which ever you want.
Regards,
JB

Debugging the user exit in ECC

hi
we have enabled ATP check in system. when we create a sales order in ECC the call goes to SCM and it creates the purchase requisition in ECC. we need to capture this purchase requisition number somewhere when we create the sales order. we figured out several user exits that are called during CIF transfer for example in ECC system
EXIT_SAPLCPUR_001
EXIT_SAPLMEPI_001
EXIT_SAPLMEPI_002
EXIT_SAPLMEPI_003
EXIT_SAPLMEPI_004
EXIT_SAPLMEPI_005
EXIT_SAPLMEPI_006
EXIT_SAPLMEPI_007
but when i put a session/external break point nothing happens. it does not stop. any suggestions
thanks
sankar

If you are trying to set the breakpoint inside the user exit FM ,then the breakpoint will be caught only if an active project exists.
Try putting a breakpoint outside the user exit FM at some statement.
Also when you get into the debugger, activate the "update debuggeR"
Hope this helps!

User exit or BAdi for field update in ECC system for SUS supplier

Dear Guru's,
I am configuring MM-SUS scenario in our srm 7.01 scenario. Not all vendors of our client are going to be SUS vendors. For SUS vendors, the client will be using Purchase Order Acknowledgement and Advanced Shipping Notification key. I am thinking of configuring a confirmation control key which will incoporate requirement of PO acknowledgement and Inbound delivery document. The assignment of confirmation control key and PO Acknowledgement Required checkbox in the vendor master record will default it in the purchase order.
Now, the question is how to update the existing vendor master data record which will be SUS vendor. I am looking at a solution like user exit or BAdi which updates the confirmation control key and purchase order acknowledgement required check box when the client manually assigns the class 'Z_CRED_SUSMM' to the ERMS vendor master.
Could you please help me to find the required exit or BAdi?
Thanks and regards,
Ranjan
Ranjan Sutradhar

EXIT_SAPMF02K_001 definitely wont work as this is for custom checks. this does not update data in vendor master.
you can try using below method of VENDOR_ADD_DATA badi.
IF_EX_VENDOR_ADD_DATA~PRESET_VALUES_PORG
but you need to read the screen field for classification and then according to that i think you can change the LFM1 data inside this badi

Is there a way to get the list of ALL user exits in ECC 5.0 or 6.0

Is this list published somewhere by SAP or can we get it from the system somehow? I m not talking about Enhancement or BADI's just user exits.
Thanks for reading

Hi ,
Just check this program to get the list
Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Thnks
Abhishek

Taxware User Exit ECC 6.0

Similar Messages

Maybe you are looking for