TC sees HD box, but not the volume

Hi. I have a time capsule attached to a USB hub with two drives connected. One is just a regular drive and is accessed with no problem. The other is a RAID box. The TC appears to see the hardware, but does not see or mount the volume. See the screenshot:
http://www.ummfish.com/airport.jpg
The RAID box mounts fine when connected straight to my Mac. The drive is formatted HFS extended, journaled.
I would appreciate any help troubleshooting this.
Thanks!
Andy

Thanks. Not sure what you may have already tried, so apologies if this is repetition.
Connect the drive directly to your computer and use Disk Utility to Repair Disk.
Applications > Utilities > Disk Utility
Power down the entire network and reconnect to the Time Capsule
Start modem first, then main router, then Time Capsule, etc to see if that helps.

Similar Messages

I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

Was your Bootcamp info.plist manipulated to change any options?

HT4993 My volume down button is not working. The UP button works, but not the down button. I have tried to restart it and that didn't solve the problem.

My volume down button doesn't work on my iPhone. The UP buttown works, but not the down button. I have tried a hard reset and that didn't fix it.

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I want to increase the ringer volume but not the background volume (ie texts, emails, etc)

I want to increase the ringer volume but not the background volume (ie texts, emails, etc)

nigelb999 wrote:
Can anyone shed some light as to why it's not possible to adjust the ringer volume at the lock screen? Even though it's possible to adjust the volume during music playback and responses from Siri, etc.
Cannot answer that question. That is a decision made by Apple.
nigelb999 wrote:
If there was a profile app available in the app store that allowed me to automatically set different volume levels at different times of the day it would be great - particularly if the app didn't require me to jailbreak the phone.
There would not be an app like that, as they would not have access to the API. You can provide feedback to Apple if you would like to see this enhancement at http://www.apple.com/feedback and click on the appropriate link.

How can I tell how many licenses are included in a volume license? I can login, but am unable to see the number included, just says purchased "1", but not the amount in the volume.

How can I tell how many licenses are included in a volume license? I can login, but am unable to see the number included, just says purchased "1", but not the amount in the volume.

Hi networka,
Please see this page for links to the resources you can use to manage a volume license: Customer resources | Adobe Buying Programs. You should be able to find this information by logging in to the Licensing Website.
Best,
Sara

CR2 files open from one camera, but not the other in CS2

Running Mac with CS2. My camera raw files shot with my lovely Canon 5D open and can be viewed in bridge and in photoshop, but NOT the camera raw from my brand new Canon powershot G9. They are both producing CR2 files. I can see the images in the bridge browser window, but when I double click to open I get a dialogue box that says, "Could not complete your request because Photoshop does not recognize this type of file." I have the 3.7 plug in installed. Please, some god or goddess of photoshop out there, show me the error of my ways!

Walt,
I will answer your questions to the best of my ability. But hopefully others who are better at this than I am will offer their help as well. So, here goes.
1. Everyone has their preferred method of using Bridge. In the Photoshop preferences I have not checked the box to have bridge start automatically. Although I use Bridge most of the time, there are occasions when I don't want to use it. So I prefer to start my Photoshop session by starting Bridge first, and then double-click on an image in Bridge to have it opened in Photoshop. In the Bridge preferences, I have checked the "Double-Click Edits Camera Raw Settings in Bridge", and I like working that way.
2. I have seen several people comment about having this problem. And occasionally it will develop after you have been using Bridge/Photoshop for a while. The only thing I can suggest is for you to hold down the Ctrl key while you start Bridge. A dialogue will appear that will allow you to reset your preferences. There are three options and you should choose all three. I know, you haven't had it installed very long, but this "could" be the problem. One guy I talked with said that he had to do it several times before it fixed the problem.
3. You indicated that you downloaded Camera Raw 4(5). What does that mean? Did you download version 4.5, which is the latest version? And, did you follow the installation instructions that were on the download page? The new plug-in must be put in the exact directory specified, replacing the old version that is already there. The old version cannot be put in a sub folder. You might as well get rid of it. You don't need it anymore. And, again, it has to go into the specific folder designated in the instructions. After you have done that, in Photoshop goto Help/About Plug-ins and click on Camera Raw. It should only be listed once, and when you click on it you should get a dialogue that will tell you what version you have installed.
4. After I installed CS3, when I inserted a card into my card reader I was presented with the normal Windows options. One of the options I was given was to download using Bridge. I chose that option and indicated to always use that option. I haven't had any problems with it since. But if that option isn't there, you can open Bridge and click on the File menu. There is an option to download images from your camera. It has worked well for me.

Blog summary page echoes blog entry but not the pic...?

My blog summary page echoes my blog entries' text but not the image file. I either get the stock photo that comes in the template, or no image at all. What's wrong?

Never mind folks...Once I submitted this, I found an identical query in the "More LIke This" box at the side of this page that gave me my answer. I have another question now that I'll pose in a new thread...

Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection.

A certain real estate web site loads, but not the photos. IE does it OK.

www.domain.com.au is a real estate sales page. Most of the site loads but not the photos, just a word 'House' in its place. I tried same site on IE and it all loaded correctly.

See http://kb.mozillazine.org/Images_or_animations_do_not_load
It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions 
See [[Options window - Content panel]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the Media tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Hi i am putting photos in my project it will play the videos but not the photos never had a problem before

hi i am putting photos in my project it will play the videos but not the photos i have not had a problem with this before

If you haven't tried re syncing the apps using iTunes..
Connect the iPad to your computer. Select it under Devices left side of the iTunes window. Select Apps from the menu, make sure the boxes next to those apps are selected then click the Sync button bottom right side of the iTunes window.

My ical will synch to my iphone, but not the reverse. Whats up with that?, My ical will synch to my iphone, but not the reverse. Whats up with that?

My ical will synch to my iphone, but not the reverse. Whats up with that?

An iPod can only sync with one iTunes library. The iPod sees the rebuilt computer as a new iTunes library. To make this computer the syncing computer
- Transfer iTunes purchases:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
newer copy
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the iPod backup that iTunes makes does not include synced media like apps and music.

I have installed Adobe Photoshop Elements 8 onto my computer. I am able to open the Organizer in the Welcome Window but not the editor. why?

I have installed Adobe Photoshop Elements 8 onto my computer. I am able to open the Organizer in the Welcome Window but not the editor. why?

The serial number will be on the disc case, not the outer box. Find your serial number quickly

After editing i can hear effects over tracks but not the tracks themselves?

after editing and saving as a garage band file i can hear the first two tracks in their entirety, but not the other 8 (except for the reverb over them). if i kill the reverb over these tracks then only silence remains. input, output and monitoring options are identical for all ten tracks. all my edits are still there, including automated volume and pan. please help

Hello, I am having the same problem. With some exceptions (and this is what's throwing me off) I can hear reverb and echo on tracks but not tracks themselves. I have tried adding echo/reverb to some of the muted tracks and I can hear these effects fine. Yet I have 2 tracks without any effects at all and I can hear those ones fine (there are 12 tracks in all). Any help would be greatly appreciated as this is my senior project and I am due to present on Thursday, June 5.

Call customer-subscreen causes dump in one box but not in another box

Hi guys,
Just wondering if anyone here encountered this situation before and knows of any explanation or solution.
There's two development boxes with a program that contains the following code/statement:
call customer-subscreen SSCR903 including 'SAPLXXXXXX' '2000'
SAPLXXXXXX happens to not exist in both boxes. In the first box, when execution reaches that statement above it will generate a dump saying that 'SAPLXXXXXX doesn't exist'. But in the second box, when execution reaches that statement above it won't generate a dump and execution continues to the next statement in the program.
I checked SAP documentation on the CALL CUSTOMER-SUBSCREEN keywords, but I didn't find anything that would explain why it dumps in the first box, but not in the second one.
Anyone encountered the same situation before? Any explanation why it's dumping in one box, but not in the other box?
Thanks in advance for any help.
Kind regards,
Carl

Welcome to sdn.
Abap doesn't check existence of the dynpro, it only check activation of the exit in CMOD, that may explain the, difference.
Regards,
Raymond

I attached my HDMI cable to my Samsung Tv. The "classic" apple screen comes up, but not the screen on my MacBook. Therefore I can't access my laptop.

I attached my HDMI cable to my Samsung Tv. The "classic" apple screen comes up, but not the screen on my MacBook. Therefore I can't access my laptop.

You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

TC sees HD box, but not the volume

Similar Messages

Maybe you are looking for